Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixture experiment models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Comparing Cycling Characteristics of Symmetric Lithium-Polymer-Lithium Cells with Theoretical Predictions

We develop a model based on concentrated solution theory for predicting the cycling characteristics of a lithium-polymer-lithium symmetric cell containing an electrolyte with known transport properties. The electrolytes used in this study are mixtures of polyethylene oxide (PEO) and lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) salt, prepared over a wide range of salt concentrations. The transport properties of PEO/LiTFSI previously reported in the literature are used as inputs for our model. We calculate salt concentration and potential profiles, which develop in these electrolytes under a constant dc polarization, as a function of current density, electrolyte thickness, and salt concentration. These profiles are nonlinear at steady-state due to the strong concentration dependence of the transport properties of this electrolyte. The effect of this nonlinearity on limiting current is demonstrated. Cycling characteristics of a series of lithium symmetric cells were measured to test the validity of our model, without resorting to any adjustable parameters. The time-dependence and steady-state value of the potential measured during cycling experiments were in excellent agreement with model predictions.

25 ENERGY STORAGE↗

Assessment of buffer-IPyC thermomechanical debonding behavior using new experimental strength data in BISON

TRIstructural ISOtropic (TRISO) fuel is a nuclear fuel commonly used in High Temperature Gas-cooled Reactors (HTGRs). A single sub-millimeter-diameter TRISO fuel particle consists of a spherical fuel kernel surrounded by four coating layers: a low-density pyrocarbon buffer layer, an inner pyrolytic carbon (IPyC) layer, a silicon carbide (SiC) layer, and an outer pyrolytic carbon (OPyC) layer. The kernel is commonly made of UO2 or a mixture of uranium carbide and uranium oxide (UCO). During reactor operation, the TRISO coating layers are subjected to irradiation-induced dimensional changes and the associated thermomechanical behavior of each layer. One of the observed behaviors is gap formation between the buffer and IPyC layer due to the porous buffer’s irradiation-induced shrinkage exceeding that of the IPyC layer. Not all irradiated particles will experience buffer-IPyC gap formation. The debonding may be partial, or it may be nearly total. However, from post-irradiation examination of UCO TRISO fuels irradiated as part of the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program, it was concluded that partial buffer-IPyC debonding was the most common type of buffer-IPyC interaction. To predict TRISO thermomechanical performance, multi-physics models have been built that are being continually updated and refined. The BISON code is a finite element-based nuclear fuel performance code that may be used for 1D, 2D, and 3D TRISO particle simulations. This code is used to calculate fuel temperature, kernel swelling, buffer densification, thermal and irradiation creep, fracture, and fission gas production and release. One of the recent additions to the BISON code is the ability to model the process of layer debonding. This paper will focus on the simulation results of the improved BISON debonding model that will utilize updated strengths measured from irradiated AGR TRISO fuel particles. The new experimental strength data from micromechanical tests of irradiated TRISO fuel samples were exercised in the BISON simulations and compared to baseline strength data to assess their applicability in the models. This also includes updated buffer-IPyC bond strengths to simulate layer delamination. Based on current experimental observations it is noted that the buffer-IPyC separation occurs not exactly at the junction of these two layers, but more on the side of the buffer layer. That observation is also implemented in the TRISO interface debonding model. This improved modeling approach using experimental strength data to characterize buffer-IPyC debonding and its potential subsequent cracking will be presented in the paper along with comparisons to available experimental observations.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Results of partial melting experiments on chondritic precursors of basaltic achondrites

Recent partial melting experiments on Murchison produced eucrite like glasses at reducing conditions. Although the glasses were remarkably similar to eucrites, the Fe/Mn ratio of the glasses was too high and the O isotopes cannot match eucrites. Mixing 70% H chondrite with 30% CM chondrite makes a potential precursor that satisfies the O isotope constraint on the eucrites. From experiments on both synthetic Murchison and a simplified version of the H70-CM30 mixture, simple partial melting of any individual or combination of known chondritic meteorites is incapable of producing eucritic glasses that have the appropriate Fe/Mn, Fe/(Fe + Mg), and O isotope ratios. In order to satisfy the Fe-Mn-Mg constraints imposed by the eucrites, both reduction of FeO to Fe-metal and olivine fractionation must occur in the precursor before partial melting is allowed to occur and produce the eucritic glass. To test this hypothesis, partial melting experiments on both Murchison and a mixture of 70% Allegan (H6)-30% Murchison (CM2) were conducted. The results of these new experiments show that to satisfy the O isotopes, Fe/Mn ratio, and Fe/(Fe + Mg) ratio, approximately 12% reduction of FeO to Fe-metal (in the silicate portion) and 20% olivine fractionation is required within the H-CM precursor to permit the formation of eucrites by partial melting. The sequence of FeO reduction and mantle fractionation permits very eucritic glasses to be produced. The problem that many remain with the H-CM precursor, however, is an overabundance of alkali elements. Correlations between temperature, O fugacity, and composition have also been found within our experiments. A basaltic achondrite precursor formed by mixing H and CM chondrites and constrained by O isotopes and Fe-Mn-Mg is compatible with a model of natural eucrites having formed by partial melting after metal and olivine fractionation in that precursor.

Boesenberg, J. S.↗

Z-Pinch Magneto-Inertial Fusion Propulsion Engine Design Concept

Fusion-based nuclear propulsion has the potential to enable fast interplanetary transportation. Due to the great distances between the planets of our solar system and the harmful radiation environment of interplanetary space, high specific impulse (Isp) propulsion in vehicles with high payload mass fractions must be developed to provide practical and safe vehicles for human spaceflight missions. Magneto-Inertial Fusion (MIF) is an approach which has been shown to potentially lead to a low cost, small fusion reactor/engine assembly (1). The Z-Pinch dense plasma focus method is an MIF concept in which a column of gas is compressed to thermonuclear conditions by an estimated axial current of approximately 100 MA. Recent advancements in experiments and the theoretical understanding of this concept suggest favorable scaling of fusion power output yield as I(sup 4) (2). The magnetic field resulting from the large current compresses the plasma to fusion conditions, and this is repeated over short timescales (10(exp -6) sec). This plasma formation is widely used in the field of Nuclear Weapons Effects (NWE) testing in the defense industry, as well as in fusion energy research. There is a wealth of literature characterizing Z-Pinch physics and existing models (3-5). In order to be useful in engineering analysis, a simplified Z-Pinch fusion thermodynamic model was developed to determine the quantity of plasma, plasma temperature, rate of expansion, energy production, etc. to calculate the parameters that characterize a propulsion system. The amount of nuclear fuel per pulse, mixture ratio of the D-T and nozzle liner propellant, and assumptions about the efficiency of the engine, enabled the sizing of the propulsion system and resulted in an estimate of the thrust and Isp of a Z-Pinch fusion propulsion system for the concept vehicle. MIF requires a magnetic nozzle to contain and direct the nuclear pulses, as well as a robust structure and radiation shielding. The structure, configuration, and materials of the nozzle must meet many severe requirements. The configuration would focus, in a conical manner, the Deuterium-Tritium (D-T) fuel and Lithium-6/7 liner fluid to meet at a specific point that acts as a cathode so the Li-6 can serve as a current return path to complete the circuit. In addition to serving as a current return path, the Li liner also serves as a radiation shield. The advantage to this configuration is the reaction between neutrons and Li-6 results in the production of additional Tritium, thus adding further fuel to the fusion reaction and boosting the energy output. To understand the applicability of Z-Pinch propulsion to interplanetary travel, it is necessary to design a concept vehicle that uses it. The propulsion system significantly impacts the design of the electrical, thermal control, avionics, radiation shielding, and structural subsystems of a vehicle. The design reference mission is the transport of crew and cargo to Mars and back, with the intention that the vehicle be reused for other missions. Several aspects of this vehicle are based on a previous crewed fusion vehicle study called Human Outer Planet Exploration (HOPE), which employed a Magnetized Target Fusion (MTF) propulsion concept. Analysis of this propulsion system concludes that a 40-fold increase of Isp over chemical propulsion is predicted. This along with a greater than 30% predicted payload mass fraction certainly warrants further development of enabling technologies. The vehicle is designed for multiple interplanetary missions and conceivably may be suited for an automated one-way interstellar voyage.

Miernik, Janie H.↗

An Experimental and Kinetic Modeling Study of Methyl Decanoate Combustion

Biodiesel is typically a mixture of long chain fatty acid methyl esters for use in compression ignition engines. Improving biofuel engine performance requires understanding its fundamental combustion properties and the pathways of combustion. This research study presents new combustion data for methyl decanoate in an opposed-flow diffusion flame. An improved detailed chemical kinetic model for methyl decanoate combustion is developed, which serves as the basis for deriving a skeletal mechanism via the direct relation graph method. The novel skeletal mechanism consists of 648 species and 2998 reactions. This mechanism well predicts the methyl decanoate opposed-flow diffusion flame data. The results from the flame simulations indicate that methyl decanoate is consumed via abstraction of hydrogen atoms to produce fuel radicals, which lead to the production of alkenes. The ester moiety in methyl decanoate leads to the formation of low molecular weight oxygenated compounds such as carbon monoxide, formaldehyde, and ketene.

09 BIOMASS FUELS↗

Tracking the Structural and Electronic Configurations of a Cobalt Proton Reduction Catalyst in Water

Time resolved X-ray absorption spectroscopy (X-TAS) has been used to study the light induced hydrogen evolution reaction catalyzed by a highly stable cobalt complex, [Ru(bpy)3]2+ photosensitizer and an equimolar mixture of sodium ascorbate/ascorbic acid electron donor in pure water. XANES and EXAFS analysis of a binary mixture of the octahedral Co(III) pre-catalyst and [Ru(bpy)3]2+ after illumination, revealed in-situ formation of a square pyramidal Co(II) intermediate, with electron transfer kinetics of 51 ns. On the other hand, X-TAS experiments of the complete photocatalytic system in the presence of the electron donor showed the formation of a square planar Co(I) intermediate species within a few nanoseconds followed by its decay in the microsecond timescales. The Co(I) structural assignment is supported by calculations based on density functional theory (DFT). At longer reaction times, we observe the formation of the initial Co(III) species concomitant to the decay of Co(I), thus closing the catalytic cycle. The experimental X-ray absorption spectra of the molecular species formed along the catalytic cycle are modeled using a combination of molecular orbital DFT calculations (DFT-MO) and Finite Difference Method (FDM). These findings allowed us to unequivocally assign the full mechanistic pathway followed by the catalyst as well as to determine the rate limiting step of the process, which consists in the protonation of the Co(I). This study provides a complete kinetics scheme for the hydrogen evolution reaction by a cobalt catalyst, revealing unique information for the development of better catalysts for the reductive side of hydrogen fuel cells.

Moonshiram, Dooshaye↗

Impact ignition and combustion of micron-scale aluminum particles pre-stressed with different quenching rates

Pre-stressing aluminum (Al) particles by annealing and quenching alters dilatational strain and is linked to increased particle reactivity. The quenching rate associated with pre-stressing is a key parameter affecting the final stress state within the Al particle, with faster quenching rates theoretically favoring a higher, more desirable stress state. Micron scale Al particles are annealed to 573 K, then quenched at different rates (i.e., 200 and 900 K/min), mixed with bismuth oxide (Bi2O 3 ), and the Al + Bi2O 3 mixtures are examined under low-velocity, drop-weight impact conditions. Both quenching rates showed increased impact ignition sensitivity (i.e., between 83% and 89% decrease in ignition energy). However, the slower quenching rate showed a 100% increase in pressurization rate compared to untreated particles, while the faster quenching rate showed a 97% increase in peak pressure, indicating that these two quenching rates affect Al particles differently. Surprisingly, synchrotron X-ray diffraction data show that the 200 K/min quenched particles have a higher dilatational strain than the untreated particles or the 900 K/min quenched particles. Results are rationalized with the help of a simple mechanical model that takes into account elastic stresses, creep in the alumina shell, and delamination of shell from the core. The model predicts that Al powder quenched at 200 K/min did not experience delamination. In contrast, Al quenched at 900 K/min did not have creep but does have delamination, and under impact, delamination led to major fracture, greater oxygen access to the core, and significant promotion of reaction. Thus, the increase in quenching rate and shell-core delamination are more important for the increase in Al reactivity than pre-stressing alone.

42 ENGINEERING↗

Gas-phase Radiolysis in Plutonium Dioxide Powder

A sample of PuO 2 powder undergoes self radiolysis, causing water present in the solid to generate hydrogen, oxygen, and minor species (e.g. H 2 O 2 ). This is a matter of concern for stored PuO 2 , since the gases could react exothermically and rupture the container. In experiments at LANL, most PuO 2 /salt samples generate mostly H 2 , but a few samples generate a mixture of H 2 and O 2 together. In these special cases, the mixture of H 2 and O 2 in the pore volumes of the powder will then be subject to radiolysis, causing the reverse reaction H 2 + O 2 $\Rightarrow$ H 2 O. In order to understand the steady-state quantities of these gases, it is necessary to estimate the amount of energy from the alpha irradiation that drives this reaction. This report outlines one possible approach for this process, yielding a value for the fractional amount of radiation deposited in the gas phase of 294 ppm. This corresponds to the case of a powder with porosity of 78%. We then use a comprehensive chemical kinetics model based on elementary gas phase reactions to calculate the rate of conversion back to water. We estimate a reduction in the H 2 pressure of about 12 kPa/month, which applies only when O 2 is simultaneously present in the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Science support for the Earth radiation budget experiment

The work undertaken as part of the Earth Radiation Budget Experiment (ERBE) included the following major components: The development and application of a new cloud retrieval scheme to assess errors in the radiative fluxes arising from errors in the ERBE identification of cloud conditions. The comparison of the anisotropy of reflected sunlight and emitted thermal radiation with the anisotropy predicted by the Angular Dependence Models (ADM's) used to obtain the radiative fluxes. Additional studies included the comparison of calculated longwave cloud-free radiances with those observed by the ERBE scanner and the use of ERBE scanner data to track the calibration of the shortwave channels of the Advanced Very High Resolution Radiometer (AVHRR). Major findings included: the misidentification of cloud conditions by the ERBE scene identification algorithm could cause 15 percent errors in the shortwave flux reflected by certain scene types. For regions containing mixtures of scene types, the errors were typically less than 5 percent, and the anisotropies of the shortwave and longwave radiances exhibited a spatial scale dependence which, because of the growth of the scanner field of view from nadir to limb, gave rise to a view zenith angle dependent bias in the radiative fluxes.

Coakley, James A., Jr.↗

Examination of Wave Speed in Rotating Detonation Engines Using Simplified Computational Fluid Dynamics

A simplified, two-dimensional, computational fluid dynamic (CFD) simulation, with a reactive Euler solver is used to examine possible causes for the low detonation wave propagation speeds that are consistently observed in air breathing rotating detonation engine (RDE) experiments. Intense, small-scale turbulence is proposed as the primary mechanism. While the solver cannot model this turbulence, it can be used to examine the most likely, and profound effect of turbulence. That is a substantial enlargement of the reaction zone, or equivalently, an effective reduction in the chemical reaction rate. It is demonstrated that in the unique flowfield of the RDE, a reduction in reaction rate leads to a reduction in the detonation speed. A subsequent test of reduced reaction rate in a purely one-dimensional pulsed detonation engine (PDE) flowfield yields no reduction in wave speed. The reasons for this are explained. The impact of reduced wave speed on RDE performance is then examined, and found to be minimal. Two other potential mechanisms are briefly examined. These are heat transfer, and reactive mixture non-uniformity. In the context of the simulation used for this study, both mechanisms are shown to have negligible effect on either wave speed or performance.

detonation↗

Examination of Wave Speed in Rotating Detonation Engines Using Simplified Computational Fluid Dynamics

A simplified, two-dimensional, computational fluid dynamic (CFD) simulation, with a reactive Euler solver is used to examine possible causes for the low detonation wave propagation speeds that are consistently observed in air breathing rotating detonation engine (RDE) experiments. Intense, small-scale turbulence is proposed as the primary mechanism. While the solver cannot model this turbulence, it can be used to examine the most likely, and profound effect of turbulence. That is a substantial enlargement of the reaction zone, or equivalently, an effective reduction in the chemical reaction rate. It is demonstrated that in the unique flowfield of the RDE, a reduction in reaction rate leads to a reduction in the detonation speed. A subsequent test of reduced reaction rate in a purely one-dimensional pulsed detonation engine (PDE) flowfield yields no reduction in wave speed. The reasons for this are explained. The impact of reduced wave speed on RDE performance is then examined, and found to be minimal. Two other potential mechanisms are briefly examined. These are heat transfer, and reactive mixture non-uniformity. In the context of the simulation used for this study, both mechanisms are shown to have negligible effect on either wave speed or performance.

combustion↗

Introduction to the SONEX (Subsonic Assessment Ozone and Nitrogen Oxides Experiment) and POLINAT-2 (Pollution from Aircraft Emissions in the North Atlantic Flight Corridor) Special Issue

Emissions of atmospheric species from the engines of subsonic aircraft at cruise altitude (roughly, above seven kilometers) are of concern to scientists, the aviation industry and policymakers for two reasons. First, water vapor, soot and sulfur oxides, and related heterogeneous processes, may modify clouds and aerosols enough to perturb radiative forcing in the UT/LS (upper troposphere/lower stratosphere). A discussion of these phenomena appears in Chapter 3 of the IPCC Aviation Assessment (1999). An airborne campaign conducted to evaluate aviation effects on contrail, cirrus and cloud formation, is described in Geophysical Research Letters. The second concern arises from subsonic aircraft emissions of nitrogen oxides (NO + NO2 = NO(sub x)), CO, and hydrocarbons. These species may add to the background mixture of photochemically reactive species that form ozone. In the UT/LS, ozone is a highly effective greenhouse gas. The impacts of subsonic aircraft emissions on tropospheric NO(sub x) and ozone budgets have been studied with models that focus on UT chemistry [e.g. see discussions of individual models in Brasseur et al., 1998; Friedl et al., 1997; IPCC, 1999]. Depending on the model used, projected increases in the global subsonic aircraft fleet from 1992 to 2015 will lead to a 50-100 pptv increase in UT/LS NO. at 12 km (compared to 50-150 pptv background) in northern hemisphere midlatitudes. The corresponding 12-km ozone increase is 7-11 ppbv, or 5-10% (Chapter 4 in IPCC, 1999). Two major sources of uncertainties in model estimates of aviation effects are: (1) the often limited degree to which global models - the scale required to evaluate aircraft emissions - realistically simulate atmospheric transport and other physical processes; (2) limited UT/LS observations of trace gases with which to evaluate model performance. In response to the latter deficiency, a number of airborne campaigns aimed at elucidating the effect of aircraft on atmospheric nitrogen oxides and ozone were performed between 1990 and 1996 (see descriptions in Friedl et al., 1997; Brasseur et al., 1998).

Thompson, Anne M.↗

An experimental and kinetic modeling study of NO x sensitization on methane autoignition and oxidation

An experimental and kinetic modeling study of the influence of NO x (i.e. NO 2 , NO and N 2 O) addition on the ignition behavior of methane/‘air’ mixtures is performed. Ignition delay time measurements are taken in a rapid compression machine (RCM) and in a shock tube (ST) at temperatures and pressures ranging from 900–1500 K and 1.5–3.0 MPa, respectively for equivalence ratios of 0.5–2.0 in ‘air’. The conditions chosen are relevant to spark ignition and homogeneous charge compression ignition engine operating conditions where exhaust gas recirculation can potentially add NO x to the premixed charge. The RCM measurements show that the addition of 200 ppm NO 2 to the stoichiometric CH 4 /oxidizer mixture results in a factor of three increase in reactivity compared to the baseline case without NOx for temperatures in the range 600–1000 K. However, adding up to 1000 ppm N 2 O does not show any appreciable effect on the measurements. The promoting effect of NO 2 was found to increase with temperature in the range 950–1150 K, while the sensitization effect decreases at higher pressures. The experimental results measured are simulated using NUIGMech1.2 comprising an updated NO x sub-chemistry in this work. A kinetic analysis indicates that the competition between the reactions ĊH 3 + NO 2 ↔ CH 3 Ȯ + NO and ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), the former being a propagation reaction and the latter being a termination reaction governs NO x sensitization on CH 4 ignition. Recent calculations by Matsugi and Shiina (A. Matsugi, H. Shiina, J. Phys. Chem. A. 121 (2017) 4218–4224) for the nitromethane formation reaction CH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M), together with the recently calculated rate constants for HONO/HNO 2 reactions significantly improve ignition delay time predictions in the temperature range 600–1000 K. Furthermore, the experiments with NO addition reveal a non-monotonous sensitization impact on CH 4 ignition at lower temperatures with NO initially acting as an inhibitor at low NO concentrations and then as a promoter as NO concentrations increase in the mixture. This non-monotonous trend is attributed to the role of the chain-termination reaction ĊH 3 + NO 2 (+M) ↔ CH 3 NO 2 (+M) and the impact of NO on the transition to the chain-branching steps CH 2 O + HȮ 2 ↔ HĊO + H 2 O 2 , H 2 O 2 (+M) ↔ ȮH + ȮH (+M), HĊO ↔ CO + Ḣ followed by CO + O 2 ↔ CO 2 + Ö and Ḣ + O 2 ↔ Ö + ȮH. NUIGMech1.2 is systematically validated against the new ignition delay measurements taken here together with species measurements and high temperature ignition delay time data available in the literature for CH 4 /oxidizer mixtures diluted with NO 2 /N 2 O/NO and is observed to accurately capture the sensitization trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cookoff experiments of a melt cast explosive (Comp-B3)

Validated models of melt cast explosives exposed to accidental fires are essential for safety analysis. In the current work, we provide several experiments that can be used to develop and validate cookoff models of melt cast explosives such as Comp-B3 composed of 60:40 wt% RDX:TNT. We present several vented and sealed experiments from 2.5 mg to 4.2 kg of Comp-B3 in several configurations. We measured pressure, spatial temperature, and ignition time. Some experiments included borescope images obtained during both vented and sealed decomposition. We observed the TNT melt, the suspension of RDX particles in the melt, bubble formation caused by RDX decomposition, and bubble-induced mixing of the suspension. The RDX suspension did not completely dissolve, even as temperatures approached ignition. Our results contrast with published measurements of RDX solubility in hot TNT that suggest RDX would be completely dissolved at these high temperatures. These different observations are attributed to sample purity. We did not observe significant movement of the two-phase mixture until decomposition gases formed bubbles. Bubble generation was inhibited in our sealed experiments and suppressed mixing.

42 ENGINEERING↗

Capturing Deuteration Effects in a Molecular Mechanics Force Field: Deuterated THF and the THF–Water Miscibility Gap

Deuteration is a common chemical modification used in conjunction with experiments such as neutron scattering, NMR, and Fourier-transform infrared for the study of molecular systems. Under the Born–Oppenheimer (BO) approximation, while the underlying potential energy surface remains unchanged by isotopic substitutions, isotopic substitution still alters intramolecular vibrations, which in turn may alter intermolecular interactions. Molecular mechanics (MM) force fields used in classical molecular dynamics simulations are assumed to represent local approximations of the BO potential energy surfaces, and hence, MD simulations using simple isotopic mass substitutions should capture BO-compatible isotope effects. However, standard MM force-field parameterizations do not directly fit to the local harmonic quantum mechanical (QM) Hessian that describes the BO surface, but rather to QM normal-modes and/or mass-dependent internal-coordinate derived distortion energies. In this study, using tetrahydrofuran (THF)–water mixtures as our model system, we show that not only does a simple mass-substitution approach fail to capture an experimentally characterized deuteration effect (the loss of the closed-loop miscibility gap associated with the complete deuteration of THF) but also it is necessary to generate new MM force-field parameters that correctly describe isotopic dependent vibrations to capture the experimental deuteration effect. We show that the origin of this failure is a result of using mass-dependent features to fit the THF MM force field, which unintentionally biases the bonded terms of the force field to represent only the isotopologue used during the original force-field parameterization. In addition, we make use of our isotopologue-corrected force field for D 8 THF to examine the molecular origins of the isotope-dependent loss of the THF–water miscibility gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative surface studies of moiré intercalated Pb structures under Gr/SiC

Quantitative growth studies using surface diffraction and scanning tunneling microscopy are carried out to determine the intercalation conditions for Pb under Gr/SiC, with initial phase a mixture of buffer-layer and single-layer graphene. Intercalation is a kinetically complex, multistage process with intercalated Pb moving between different subsurface locations with annealing, eventually to the location of higher stability. The transfer is determined by monitoring the difference of a given spot intensity from its clean value, as a function of growth parameters. In addition, a broad, low-intensity (10×10) gr moiré phase is observed exclusively originating from intercalated Pb. Well-defined growth conditions are identified for the moiré spot to be observed reversibly. The (10×10) gr phase follows changes of the Pb(10) spot during growth and annealing experiments, instead of changes of the other Gr/SiC spots indicating preferred nucleation of Pb islands on the (10×10) gr domains. These structural results are discussed in connection to different models proposed for the (10×10) gr supercell and the subsurface Pb coverage. In conclusion, mass transport of subsurface Pb is unusually high, possibly because of the very high compression of the intercalated Pb, when compared to metallic Pb(111).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geometric stabilization of extended S=2 vortices in two-dimensional photonic lattices: Theoretical analysis, numerical computation, and experimental results

In this work, we focus on the subject of nonlinear discrete self-trapping of S=2 (doubly-charged) vortices in two-dimensional photonic lattices, including theoretical analysis, numerical computation, and experimental demonstration. We revisit earlier findings about S=2 vortices with a discrete model and find that S=2 vortices extended over eight lattice sites can indeed be stable (or only weakly unstable) under certain conditions, not only for the cubic nonlinearity previously used, but also for a saturable nonlinearity more relevant to our experiment with a biased photorefractive nonlinear crystal. We then use the discrete analysis as a guide toward numerically identifying stable (and unstable) vortex solutions in a more realistic continuum model with a periodic potential. Finally, we present our experimental observation of such geometrically extended S=2 vortex solitons in optically induced lattices under both self-focusing and self-defocusing nonlinearities and show clearly that the S=2 vortex singularities are preserved during nonlinear propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deflagration to Detonation Transition Update: XDDT Code Modularization

A legacy FORTRAN 77 implementation of the Baer–Nunziato two-phase mixture theory for deflagration-to-detonation transition (DDT) in reactive granular materials—hereafter the XDDT (eXplosive DDT) code—has been modularized to Fortran 90 with modular structure, external input files, and adaptive mesh capability. During validation, two code defects were identified and corrected: an inconsistency in the nodal solid pressure evaluation and a nonphysical burn-front tracking criterion. The ignition criterion was also corrected to use the granular surface temperature from the interface heat transfer model, matching the original Baer implementation. An initial attempt to validate against Figure 3 of the original Baer and Nunziato (1986) paper revealed that the code’s detonation velocity on a 201-node mesh (5.5 km/s) was approximately 21% below the expected Chapman–Jouguet value for 70% TMD HMX (∼7 km/s). Validation was redirected to the piston-driven DDT experiments of McAfee et al. (1989), Shot B-9036, for which well-characterized ionization-pin data are available. With the compaction-burn coefficient calibrated to 𝐶 𝛼 = 75, the XDDT code reproduces the DDT transition time to within 0.4% and produces a steady-state detonation velocity within 4% of the McAfee experimental value of 6.36 km/s. The burn model was generalized to support pressure-dependent exponents, enabling application to nitrocellulose-based ball propellants (TS3659) with a cube-root pressure dependence. Validation against the Sandusky/Baer PDC82 piston-impact experiment yielded a reactive wave velocity of 2.3–2.8 km/s, in good agreement with the experimental value of ∼2.2 km/s, and wave coalescence within 5% of the experimental timing. The mathematical model, input parameter requirements, and a roadmap for extending XDDT to PETN with an autocatalytic burn model are presented.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗