Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The mean free path of low-rigidity cosmic rays

The paper presents a simple heuristic argument that suggests that the large rigidity independent mean free paths observed for low-rigidity solar and galactic cosmic rays can be understood in terms of weak turbulence diffusion theory. This is shown to be possible if it is assumed that the interplanetary magnetic turbulence consists of a combination of Alfven waves propagating with constant field magnitude and a small (about 5-10 percent) admixture of compressive fluctuations.

Goldstein, M. L.↗

Analytical and experimental study of mean flow and turbulence characteristics inside the passages of an axial flow inducer

The inviscid and viscid effects existing within the passages of a three bladed axial flow inducer operating at a flow coefficient of 0.065 are investigated. The blade static pressure and blade limiting streamline angle distributions were determined and the three components of mean velocity, turbulence intensities, and turbulence stresses were measured at locations inside the inducer blade passage utilizing a rotating three sensor hotwire probe. Applicable equations were derived for the hotwire data reduction analysis and solved numerically to obtain the appropriate flow parameters. The three dimensional inviscid flow in the inducer was predicted by numerically solving the exact equations of motion, and the three dimensional viscid flow was predicted by incorporating the dominant viscous terms into the exact equations. The analytical results are compared with the experimental measurements and design values where appropriate. Radial velocities are found to be of the same order as axial velocities within the inducer passage, confirming the highly three dimensional characteristic of inducer flow. Total relative velocity distribution indicate a substantial velocity deficiency near the tip at mid-passage which expands significantly as the flow proceeds toward the inducer trailing edge. High turbulence intensities and turbulence stresses are concentrated within this core region. Considerable wake diffusion occurs immediately downstream of the inducer trailing edge to decay this loss core. Evidence of boundary layer interactions, blade blockage effects, radially inward flows, annulus wall effects, and backflows are all found to exist within the long, narrow passages of the inducer.

Gorton, C. A.↗

A study of radiometric surface temperatures: Their fluctuations, distribution and meaning

A consecutive night and day flight and measurements on the ground, were made in the region of Voves, south of Chartres. The statistical analysis of the thermal scanner data permitted the establishment of criteria for the homogeneity of surfaces. These criteria were used in defining the surface temperature values which are most representative for use in an energy balance approach to evapotranspiration (day) and heat balance (night). For a number of maize fields that airborne thermal scanner data permitted a detailed energy analysis of different fields of a same crop to be carried out. Such a detailed analysis was not necessary for a calculation of crop evapotranspiration which could be evaluated from the mean temperature of the crop surface. A differential analysis day night is of interest for enhancing the contrast between types of surfaces, as well as for a better definition of the daily energy balance. It should be stressed that, for a homogeneous region, a study such as the present one, could be carried out on a relatively small part of the total surface, as the results for a surface of 2.5 x 2 sq km were not significantly different from those obtained from a surface three times larger.

Perrier, A.↗

Two-dimensional zonal mean flow model

The interactions of dynamics, photochemistry and radiation in the stratosphere can be described by the continuity, momentum, and energy equations. A more comprehensive model for stratospheric transport theory was developed for the purpose of aiding predictions of changes in the stratospheric ozone content as a consequence of natural and anthropogenic processes. This model is time dependent and the dependent variables are zonal means of the relevant meteorological quantities which are functions of latitude and height. The detailed formulation of a numerical model both in physics and mathematics is given. A set of fundamental dynamical equations, and the numerical method used in the integration are described.

Chen, H. C.↗

Multigrid method with weighted mean scheme

Multigrid algorithms based on the weighted mean scheme are developed for the solution of the two dimensional incompressible Navier-Stokes equations. They are applied to two typical problems encountered in engineering applications, namely, the convection diffusion problem of the Benard convection cell, and the driven cavity problem. An analysis of the smoothing rates and stability is given. The efficiency of the multigrid method is investigated.

Lustman, L. R.↗

The mean-mass of cosmic-ray Ne, Mg and Si at 1.0 GeV/amu

The results of a new measurement of the mean mass of the cosmic-ray nuclei Ne, Mg and Si at an energy of 1.0 GeV/amu are presented. The method employs the filtering effect of the geomagnetic field on the incoming cosmic-ray fluxes. The results were obtained in two balloon flights from Muskogee, Oklahoma (vertical cutoff rigidity = 3.4 GV) yielding an exposure factor of 20 sq m srh. The instrument consists of a counter telescope containing 2 plastic scintillators, 2 Cerenkov radiators and a multiwire proportional chamber hodoscope for trajectory identification.

Dwyer, R.↗

Characteristics of mean velocity in the annulus wall region at the exit of turbomachinery rotor passage

This paper reports the experimental study of the three-dimensional characteristics of the mean velocity in the annulus-wall boundary layer and wake mixing region of a moderately loaded compressor rotor blade. The measurements reported were obtained using a three-sensor hot-wire probe at the exit of the rotor. They consisted of tangential surveys at several axial and radial locations downstream of the compressor rotor blade passage. The variation of the streamwise, normal, and radial velocity profiles and their decay characteristics are derived from this data. The measurements reveal the highly complex and three-dimensional nature of the annulus-wall flow field and the nature of the interaction of the annulus-wall boundary layer, the blade boundary layers and wake, and the secondary flow associated with the annulus-wall region.

Davino, R.↗

Acoustic transmission in non-uniform ducts with mean flow. I - The method of weighted residuals. II - The finite element method

The problem of acoustic transmission through nonuniform ducts containing a high-speed subsonic flow is studied by means of the method of weighted residuals in the form of a modified Galerkin method and a Galerkin formulation of the finite element method. The method of weighted residuals is shown to employ the basis functions generated from eigenvalue calculations for the case of no flow, and is verified by comparison with exact eigenvalue calculations in the uniform duct case and numerical solutions of the one-dimensional form of the equations in the nonuniform duct case. The finite element scheme based on both the Galerkin method and the residual least squares method and employing eight-noded isoparametric elements is presented and used to investigate multimodal propagation by the coupling of the solution in the duct nonuniform section to modal expansions in uniform sections. Comparison of the results of the two methods reveals them to be in substantial agreement, and predicts the importance of multimodal interactions at high Mach numbers.

Eversman, W.↗

Mean thermal and albedo behavior of the Mars surface and atmosphere over a Martian year

A Mars average data set (MADS) has been constructed from thermal and albedo measurements of the Viking Infrared Thermal Mapper; by merging information from all longitudes, and ensuring reasonably complete longitudinal sampling, a representation of mean Mars behavior is obtained. Brightness temperatures at 7, 9, 11, 15, and 20 microns and albedo information in the band 0.3-3.0 microns have been binned using 2 deg latitude strips, 24 times of day, 3 emission angle intervals, and 23 nonoverlapping solar longitude periods covering 1.43 Mars years starting at a solar longitude of 84 deg. The MADS is ideally suited to parametric study of latitudinal, diurnal, angular, and seasonal dependences. Data are presented for surface thermal and albedo behavior in clear and dusty atmospheric conditions; the thermal response of the atmospheric temperature to a major dust storm is found to be consistent with Mariner 9 data from the 1971 storm. Examples of use of the MADS, which is available through the Mars Consortium, indicate how averaged data reveal specific surface and atmospheric phenomena.

Martin, T. Z.↗

Spatial and temporal variations of monthly mean total columnar ozone derived from 7 years of BUV data

Ninth-degree spherical harmonic models are used to represent monthly mean total columnar ozone fields, with spatial spectra defined in terms of simple analytic expressions representing the rms value of each spherical harmonic coefficient. The spectra are combined with estimation theory techniques to develop a realistic error analysis accounting for errors due to nonglobal coverage. Amplitude and phase variations for longitudinal waves one, two and three are presented, and it is shown that these waves reinforce in space and time in the period of high poleward ozone transport in the northern hemisphere. In the southern hemisphere, the wave two and three components are much smaller, with wave one maximum amplitude occurring in September and October.

Tolson, R. H.↗

Mean molecular weight and hydrogen abundance of Titan's atmosphere

The 200-600/cm continuum opacity in the troposphere and lower stratosphere of Titan is inferred from thermal emission spectra from the Voyager 1 IR spectrometer (IRIS). The surface temperature and mean molecular weight are between 94 and 97 K and between 28.3 and 29.2 AMU, respectively. The mole fraction of molecular hydrogen is 0.002 + or - 0.001, which is equivalent to an abundance of approximately 0.2 + or - 0.1 km amagat.

Samuelson, R. E.↗

On eigensolutions for discontinuous liners in a duct containing uniform mean flow

Sound attenuation in a rectangular acoustically lined duct containing uniform mean flow is analytically investigated using the generalized Wiener-Hopf technique. Uniqueness of the solution is enforced for lined sections of the finite axial extent by imposing edge conditions at the liner interface. Possible edge conditions are considered, including the Kutta condition, and the causal solution corresponding to edge conditions is considered the best choice. Solution methods such as the mode matching and singularity methods imply differing edge conditions, and results show that power attenuation is insensitive to the imposed edge conditions, although significant differences are observed for the reflection coefficient. The amplitude of the exponentially increasing instability mode in the lined section must be set to zero as a first approximation to the nonlinear situation, and results indicate that measurements of the reflection factor can be used to make a more definite decision about physically appropriate edge conditions.

Koch, W.↗

Preliminary Data on Rain Deflection from Aircraft Windshields by Means of High-Velocity Jet-Air Blast

A preliminary experimental investigation is being conducted to determine the feasibility of preventing rain from impinging on aircraft windshields by means of high-velocity jet-air blast. The results indicate that rain deflection by jet blast appears feasible for flight speeds comparable with landing and take-off speeds of interceptor-type jet aircraft; however, attainment of good visibility through the mist generated by raindrop breakup presents a problem. For the simulated windshield and the lower windshield angles used in the investigation, air-flow rates of the order of 3.3 pounds per minute of unheated air per inch of windshield span were required for adequate rain deflection at a free-stream velocity of 135 miles per hour. A method has been devised whereby it is possible to produce large-diameter water drops (1000 to 1500 p.) in a moving air stream, without breakup, at speeds in excess of 175 miles per hour.

Ruggeri, Robert S.↗

Millimeter wave radiometry as a means of determining cometary surface and subsurface temperature

Thermal emission spectra for a variety of cometary nucleus models were evaluated by a radiative transfer technique adapted from modeling of terrestrial ice and snow fields. It appears that millimeter wave sensing from an interplanetary spacecraft is the most effective available means for distinguishing between alternate models of the nucleus and for evaluating the thermal state of the layer which is below the instantaneous surface where modern theories of the nucleus indicate that sublimation of the cometary volatiles actually occurs.

Hobbs, R. W.↗

Measurements of Mean Static Pressure and Far Field Acoustics of Shock Containing Supersonic Jets

The far field acoustic data base generated in studies of broadband shock noise from supersonic jets is presented. Both conical and contoured nozzles of exit Mach numbers 1.0, 1.5, and 2.0 were tested using unheated air at pressure ratios ranging from 1.9 to 14. Tests were performed both with and without screech suppression tabs. Overall sound pressure variations and representative 1/3-octave and narrowband spectra are presented. The mean static pressure measured within these jets is also surveyed.

Norum, T. D.↗

Mean excitation energy for molecules of hydrogen and carbon

The Gordon-Kim electron gas model of molecular bonding is used to calculate correction factors for the Bragg rule for molecules of hydrogen and carbon. General rules for molecular mean excitation energies are obtained that agree to about 4% with experimental values.

Wilson, J. W.↗

Methods for the calculation of axial wave numbers in lined ducts with mean flow

A survey is made of the methods available for the calculation of axial wave numbers in lined ducts. Rectangular and circular ducts with both uniform and non-uniform flow are considered as are ducts with peripherally varying liners. A historical perspective is provided by a discussion of the classical methods for computing attenuation when no mean flow is present. When flow is present these techniques become either impractical or impossible. A number of direct eigenvalue determination schemes which have been used when flow is present are discussed. Methods described are extensions of the classical no-flow technique, perturbation methods based on the no-flow technique, direct integration methods for solution of the eigenvalue equation, an integration-iteration method based on the governing differential equation for acoustic transmission, Galerkin methods, finite difference methods, and finite element methods.

Eversman, W.↗