Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Smoky Mountain Data Challenge 2020: An Open Call to Solve Data Problems in the Areas of Neutron Science, Material Science, Urban Modeling and Dynamics, Geophysics, and Biomedical Informatics

The 2020 Smoky Mountains Computational Sciences and Engineering Conference enlists research scientists from across Oak Ridge National Laboratory (ORNL) to be data sponsors and help create data analytics challenges for eminent data sets at the laboratory. This work describes the significance of each of the seven data sets and their as- sociated challenge questions. The challenge questions for each data set were required to cover multiple difficulty levels. An international call for participation was sent to students, and researchers asking them to form teams of up to four people to apply novel data analytics techniques to these data sets.

Parete-Koon, Suzanne↗

The Metal Effect on Self-Assembling of Oxalamide Gelators Explored by Mass Spectrometry and DFT Calculations

Gels formed by self-assembly of small organic molecules are of wide interest as dynamic soft materials with numerous possible applications, especially in terms of nanotechnology for functional and responsive biomaterials, biosensors, and nanowires. Four bis-oxalamides were chosen to show if electrospray ionization mass spectrometry (ESI-MS) could be used as a prediction of a good gelator and also to shed light on the gelation processes. By inspecting the gelation of several solvent, we showed that bis(amino acid)oxalamide 1 proved to be the most efficient, also being able of forming the largest observable assemblies in the gas phase. The formation of singly charged assemblies holding from one up to six monomer units is the outcome of the strong intermolecular H-bonds, particularly among terminal carboxyl groups. The variation of solvents from polar aprotic towards polar protic did not have any significant effects on the size of the assemblies. The addition of a salt such as NaOAc or Mg(OAc){sub 2}, depending on the concentration, altered the assembling. Computational analysis at the DFT level aided in the interpretation of the observed trends and revealed that individual gelator molecules spontaneously assemble to higher aggregates, but the presence of the Na{sup +} cation disrupts any gelator organization since it becomes significantly more favorable for gelator molecules to bind Na{sup +} cations up to the 3:1 ratio than to self-assemble, being fully in line with experimental observations reported here. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomistically informed stochastic multiscale model to predict the behavior of carbon nanotube-enhanced nanocomposites

A comprehensive, point-information-to-continuum-level analysis framework is presented in this paper to accurately characterize the behavior of carbon nanotube (CNT)-enhanced composite materials. Molecular dynamics (MD) simulations are performed to study sub-nanoscale interactions of the CNT with the polymeric phase of the nanocomposite. The effect of cross-linking between the epoxy resin and the hardener on the mechanical properties of the polymer is investigated; furthermore, the effect of CNT weight fraction on the probability distribution of polymer cross-linking degree is also studied through stochastic models. The stochastic distributions obtained from MD simulations provide a basis to simulate local variations in the matrix properties in the continuum model at the microscale. The inclusion of an atomistically informed elastic-plastic model at the microscale reveals a significant deviation of the mechanical properties from those obtained based on classical homogenization approaches. Microstructural variability arising from heterogeneous cross-linking degree in the polymer phase and variations in fiber geometry and spacing is also found to cause deviations in the mechanical response when compared to the assumption of a perfectly ordered fiber-matrix microstructure.

Subramanian, Nithya↗

Predictive modeling of dynamic fracture growth in brittle materials with machine learning

We use simulation data from a high delity Finite-Discrete Element Model to build an e cient Machine Learning (ML) approach to predict fracture growth and coalescence. Our goal is for the ML approach to be used as an emulator in place of the computationally intensive high delity models in an uncertainty quanti cation framework where thousands of forward runs are required. The failure of materials with various fracture con gurations (size, orientation and the number of initial cracks) are explored and used as data to train our ML model. This novel approach has shown promise in predicting spatial (path to failure) and temporal (time to failure) aspects of brittle material failure. Predictions of where dominant fracture paths formed within a material were ~85% accurate and the time of material failure deviated from the actual failure time by an average of ~16%. Additionally, the ML model achieves a reduction in computational cost by multiple orders of magnitude.

36 MATERIALS SCIENCE↗

Rolling hills on the core-mantle boundary

Recent results suggest that an iron-rich oxide may have fractionally crystallized from a primordial magma ocean and settled on the core–mantle boundary (CMB). Based on experimental results, the presence of only a few percent of Fe-rich oxide could slow seismic waves down by several percent. This heavy layer can become highly undulating as predicted from dynamic modeling but can remain as a distinct structure with uniform velocity reductions. Here, we use the large USArray seismic network to search for such structures. Strong constraints on D" are provided by the core-phase SKS where it bifurcates, containing a short segment of P-wave diffractions (P d ) when crossing the CMB, called SKS d . Synthetics from models with moderate velocity drops (less than 10%) involving a layer with variable thickness, perhaps a composite of sharp small structures, with strong variation in thickness can explain both the observed SKS d waveforms and large scatter in differential times between SKKS and SKS. A smooth 3D image is obtained from inverting SKS d waveforms displaying rolling-hills with elongated dome-like structures sitting on the CMB. The most prominent one has an 80-km height, ~8° length, and ~4° width, thus adding still more structural complexity to the lower mantle. We suggest that these results can be explained by a dynamically-stabilized material containing small amounts (~5%) iron-rich (Mg,Fe)O providing a self-consistent physical interpretation.

Sun, Daoyuan↗

Stability boundary and optimal operating parameter identification in milling using Bayesian learning

Here, this paper describes a novel Bayesian learning approach for stability boundary and optimal parameter identification in milling without the knowledge of the underlying tool dynamics or material cutting force coefficients. The paper is divided into two parts. First, a Bayesian learning method for stability lobe identification using test results is described. Each axial depth and spindle speed combination is characterized by a probability of stability which is updated using Bayes’ rule when a test result (stable or unstable) is made available. A novel likelihood function is defined which incorporates knowledge of the stability behavior. Numerical results show convergence to the analytical stability lobe diagram. Second, an adaptive experimental strategy to identify optimal operating parameters that maximize material removal rate is described. Numerical evaluation shows convergence to the optimal operating point with error less than 15 % within ten tests on average. The approach is validated using experimental results. Results show that the proposed method is an efficient and robust learning method to identify the stability lobe diagram and optimal operating parameters with a limited number of tests/data points.

Bayesian machine learning↗

Co{sub 3}O{sub 4}-Co{sub 2}ZnO{sub 4} spinels: The case for a solid solution

In prior first-principles theoretical work we predicted a complete solid solution in the Co{sub 3}O{sub 4}-Co{sub 2}ZnO{sub 4} system, with a negligibly small mixing enthalpy. In this work we tested this prediction on bulk, large-grained specimens across the Co{sub 3}O{sub 4}-Co{sub 2}ZnO{sub 4} join, combining oxide melt solution calorimetry, differential scanning calorimetry, precise lattice parameter measurements, anomalous X-ray and neutron diffraction, and in situ electrical measurements. The calorimetric results confirm the presence of a solid solution at high temperatures, but with a large enthalpy of mixing that exceeds the predicted value. Because Co{sub 3}O{sub 4} and Co{sub 2}ZnO{sub 4} have essentially identical lattice parameters, this energetic destabilization must arise from factors other than the strain energy resulting from size mismatch. Changes in Co{sup 3+} spin states vs. temperature and zinc content are proposed to account for the positive excess enthalpy, and may also provide additional entropy to stabilize the solid solution at high temperature. - Graphical abstract: The first-principles theoretical prediction of a complete solid solution in Co{sub 3}O{sub 4}-Co{sub 2}ZnO{sub 4} spinels has been confirmed experimentally by calorimetric, structural, and electrical measurements. The large mixing enthalpy observed exceeds the predicted value and cannot be accounted for by strain or cation distribution contributions alone, since such effects are small in this system; instead, changes in the spin state of Co{sup 3+} are proposed to account for the mixing thermodynamics. Highlights: Black-Right-Pointing-Pointer Experiments confirm theory prediction of a solid solution in Co{sub 3}O{sub 4}-Co{sub 2}ZnO{sub 4} spinels. Black-Right-Pointing-Pointer Thermodynamics of mixing studied by calorimetric, electrical, structural methods. Black-Right-Pointing-Pointer Cation distributions found to be mostly normal for various compositions. Black-Right-Pointing-Pointer Mixing enthalpy is larger than prediction and inconsistent with strain effects. Black-Right-Pointing-Pointer Changes in Co{sup 3+} spin state proposed as source of large mixing enthalpy/entropy.

36 MATERIALS SCIENCE↗

Syntheses and structure of hydrothermally prepared CsNiX{sub 3} (X=Cl, Br, I)

During reinvestigation of the hydrothermal synthesis reported earlier of the compound cesium nickel phosphide, 'CsNiP', we arrived at a new route to the synthesis of the cesium nickel halide compounds CsNiX{sub 3} (X=Cl, Br, I). The method has also been shown to extend to cobalt and iron compounds. Single crystals of these compounds were synthesized in phosphoric acid in sealed autoclaves. Their structures were determined by single-crystal X-ray diffraction methods. The compounds crystallize in the hexagonal space group P6{sub 3}/mmc in the BaNiO{sub 3} structure type. The synthetic method and the resultant crystallographic details for CsNiCl{sub 3} are essentially identical with those reported earlier for the synthesis and structure of 'CsNiP'. - Graphical abstract: The CsNiX{sub 3} (X=Cl, Br, I) structure. Cesium is blue, nickel is in dark green polyhedra, halide is brown. Highlights: Black-Right-Pointing-Pointer A hydrothermal approach to single crystal growth of cesium transition-metal halides. Black-Right-Pointing-Pointer Reexamination of 'CsNiP' to determine its composition as CsNiCl{sub 3}. Black-Right-Pointing-Pointer X-ray single-crystal structures of CsNiBr{sub 3} and CsNiI{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗