Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials aging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

FY2011 Progress Report: Agreement 8697 - NOx Sensor Development

Objectives are: (1) Develop an inexpensive, rapid-response, high-sensitivity and selective electrochemical sensor for oxides of nitrogen (NO{sub x}) for compression-ignition, direct-injection (CIDI) OBD II systems; (2) Explore and characterize novel, effective sensing methodologies based on impedance measurements and designs and manufacturing methods that are compatible with mass fabrication; and (3) Collaborate with industry in order to (ultimately) transfer the technology to a supplier for commercialization.

36 MATERIALS SCIENCE↗

Study of Intermetallic Nanostructures for Light-Water Reactors

High temperature mechanical measurements were conducted to study the effect of the dynamic precipitation process of PH 13-8 Mo maraging steel. Yield stress, ultimate tensile strength, total elongation, hardness, strain rate sensitivity and activation volume were evaluated as a function of the temperature. The dynamic changes in the mechanical properties at different temperatures were evaluated and a balance between precipitation hardening and annealed softening is discussed. A comparison between hardness and yield stress and ultimate tensile strength over a temperature range from 300 to 600 °C is made. The behavior of the strain rate sensitivity was correlated with the intermetallic precipitates formed during the experiments.

36 MATERIALS SCIENCE↗

Study of Intermetallic Nanostructures for Light-Water Reactors

High temperature mechanical measurements were conducted to study the effect of the dynamic precipitation process of PH 13-8 Mo maraging steel. Yield stress, ultimate tensile strength, total elongation, hardness, strain rate sensitivity and activation volume were evaluated as a function of the temperature. The dynamic changes in the mechanical properties at different temperatures were evaluated and a balance between precipitation hardening and annealed softening is discussed. A comparison between hardness and yield stress and ultimate tensile strength over a temperature range from 300 to 600 °C is made. The behavior of the strain rate sensitivity was correlated with the intermetallic precipitates formed during the experiments.

36 MATERIALS SCIENCE↗

The Advancement of Cool Roof Standards in China from 2010 to 2015

Since the initiation of the U.S.-China Clean Energy Research Center-Building Energy Efficiency (CERC-BEE) cool roof research collaboration between the Lawrence Berkeley National Laboratory Heat Island Group and Chinese institutions in 2010, new cool surface credits (insulation trade- offs) have been adopted in Chinese building energy efficiency standards, industry standards, and green building standards. JGJ 75-2012: Design Standard for Energy Efficiency of Residential Buildings in Hot Summer and Warm Winter Zone became the first national level standard to provide cool surface credits. GB/T 50378-2014: Assessment Standard for Green Building is the first national level green building standard that offers points for heat island mitigation. JGJ/T 359-2015: Technical Specification for Application of Architectural Reflective Thermal Insulation Coating is the first industry standard that offers cool coating credits for both public and residential buildings in all hot-summer climates (Hot Summer/Cold Winter, Hot Summer/Warm Winter). As of December 2015, eight provinces or municipalities in hot-summer regions have credited cool surfaces credits in their residential and/or public building design standards; five other provinces or municipalities in hot-summer regions recommend, but do not credit, the use of cool surfaces in their building design standards. Cool surfaces could be further advanced in China by including cool roof credits for residential and public building energy efficiency standards in all hot-summer regions; developing a standardized process for natural exposure and aged-property rating of cool roofing products; and adapting the U.S.-developed laboratory aging process for roofing materials to replicate solar reflectance changes induced by natural exposure in China.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Literature Review of Recycling Polypropylene and Polyamide 12 Powders for Selective Laser Sintering

Additive manufacturing (AM) is the creation of three-dimensional parts by adding material layer-by-layer based on two dimensional “slices” of a CAD file, without molds or tooling. AM has broken the relationship between part complexity and manufacturing cost. As a general rule, for conventional manufacturing, the more complex the part produced, the more costly its manufacturing. For example, in the production of a bracket for a satellite, moving from conventional manufacturing to AM allowed the part to be consolidated from 4 parts to just one, as well as reducing the weight of the part by 35%. A further benefit, AM can be more cost effective for small lot sizes. To illustrate, consider a case study of white board marker caps presented by Klahn et al. The cost to produce 1,000 units of a new design using SLS was about an order of magnitude lower than conventional manufacturing, as shown in Figure 1.

36 MATERIALS SCIENCE↗

Magnetic properties of Apollo samples and implications for regolith formation

The magnetic properties of a number of Apollo 17 samples have been measured and confirm that regoliths of mare sites (Apollo 11, 12, 15 valley, and 17 valley) differ markedly from those of highland sites (Apollo 14, 16, and 17 massif) in the ratio of content of metallic to ferrous iron and in the grain size of metallic iron. The ratio of metallic to ferrous iron is correlated with mean particle size, a parameter representing maturity, for soils of Apollo 16 and roughly correlated with the age of the sites for soils of different sites. It is suggested that the ratio of metallic to ferrous iron may be an effective indicator of relative soil maturity for any one site and of the age of the soil material for any sites.

Pearce, G. W.↗

High-temperature resins

The basic chemistry, cure processes, properties, and applications of high temperature resins known as polyimides are surveyed. Condensation aromatic polymides are prepared by reacting aromatic diamines with aromatic dianhydrides, aromatic tetracarboxylic acids, or with dialkyl esters of aromatic tetracarboxylic acids, depending on the intended end use. The first is for coatings or films while the latter two are more suitable for polyimide matrix resins. Prepreg solutions are made by dissolving reactants in an aprotic solvent, and advances in the addition of a diamine on the double bond and radical polymerization of the double bond are noted to have yielded a final cure product with void-free characteristics. Attention is given to properties of the Skybond, Pyralin, and NR-150B polyimide prepreg materials and characteristics of aging in the NP-150 polyimides. Finally, features of the NASA-developed PMR polyimides are reviewed.

Serafini, T. T.↗

The abundance of the actinides in the cosmic radiation as measured on HEAO 3

The HEAO 3 detector of heavy cosmic-ray nuclei has observed one possible actinide nucleus and some 100 nuclei of the platinum-lead group of elements. The resulting upper limit of 3% for the abundance ratio of actinides to platinum-lead nuclides is significantly lower than previous results from other observations. This new limit is inconsistent with freshly synthesized, pure r-process sources for cosmic-ray nuclei in this charge interval but is consistent with a source having a composition similar to the solar system, or to aged r-process material. We observe no events with a charge greater than 96.

Binns, W. R.↗

High-temperature molten salt thermal energy storage systems for solar applications

Experimental results of compatibility screening studies of 100 salt/containment/thermal conductivity enhancement (TCE) combinations for the high temperature solar thermal application range of 704 deg to 871 C (1300 to 1600 F) are presented. Nine candidate containment/HX alloy materials and two TCE materials were tested with six candidate solar thermal alkali and alkaline earth carbonate storage salts (both reagent and technical grade of each). Compatibility tests were conducted with salt encapsulated in approx. 6.0 inch x 1 inch welded containers of test material from 300 to 3000 hours. Compatibility evaluations were end application oriented, considering the potential 30 year lifetime requirement of solar thermal power plant components. Analyses were based on depth and nature of salt side corrosion of materials, containment alloy thermal aging effects, weld integrity in salt environment, air side containment oxidation, and chemical and physical analyses of the salt. A need for more reliable, and in some cases first time determined thermophysical and transport property data was also identified for molten carbonates in the 704 to 871 C temperature range. In particular, accurate melting point (mp) measurements were performed for Li2CO3 and Na2CO3 while melting point, heat of fusion, and specific heat determinations were conducted on 81.3 weight percent Na2CO3-18.7 weight percent K2CO3 and 52.2 weight percent BaCO3-47.8 weight percent Na2CO3 to support future TES system design and ultimate scale up of solar thermal energy storage (TES) subsystems.

Petri, R. J.↗

New models for landform evolution on Io

As part of the Galilean Satellites Mappers Program, the South Polar region of Io was studied. Examination of the Voyager images had led to reassessment of the possible mechanisms by which certain units were created or modified in this area. Specifically, analyses have focused on determining the relative age of the mountain material and on the process by which the layered plains material was eroded.

Mouginis-Mark, P. J.↗

Environmental stability graphite/PMR-15 composites

During the past few years the Boeing Company was screening graphite composites for use in hot areas of engine nacelle structure. Structural and thermal analyses have shown that there is the potential for a 25 to 30 percent weight savings by using a graphite polyimide (Gr/PI) composite material in this type of structure. Work conducted on the NASA CASTS program (Composites for Advanced Space Transportation Systems) amply demonstrated the capability of Graphite/PMR-15 for short term service (125 hours) at temperatures up to 589 K (600 F). In addition, the CASTS program demonstrated that large structures could be fabricated using Gr/PMR-15. In commercial applications, however, the requirement exists for long term service capability (tens of thousands of hours) at temperatures ranging upwards from 449 K (350 F). The results of Graphite/PMR-15 materials characterization efforts conducted at Boeing are presented with emphasis on materials properties after isothermal aging at temperatures of 449 K (350 F) and above.

Sheppard, C. H.↗

Discovery of fast-moving oxygen filaments in Puppis A

A number of faint filaments in the Puppis A supernova remnant have been found to have spectra with strong oxygen lines, extremely weak Balmer lines, and radial velocities greater than 1500 km/s. These are very different from the bright filaments, which are nitrogen-rich and have velocities less than 300 km/s. The newly discovered filaments are spectroscopically similar to those found in young, oxygen-rich remnants, as typified by the fast-moving knots in Cas A. These Puppis A filaments are interpreted as knots of oxygen-rich supernova ejecta which remain relatively uncontaminated by interstellar material, despite the probable age of Puppis A of several thousand years. Spectra of the newly discovered filaments show, in addition to strong forbidden lines of O I, O II, and O III, permitted lines of O I: 7774, 8446 A. The permitted lines are attributed to recombination of O(+), and their strength relative to H is used to estimate that the O:H mass ratio is about 30.

Winkler, P. F.↗

Pulsed Source Of Energetic Oxygen Atoms

Apparatus developed that generates high-flux pulses of oxygen atoms to bombard specimens in experiments on aging and degradation of materials in low Earth-orbit environment. Preliminary studies of specimens irradiated with atomic oxygen provided spectral evidence of erosion, in addition to measurable mass loss. Intense atomic oxygen pulses also useful in studies of microfabrication techniques.

Caledonia, George↗

Shock effects in meteorites

The impacts that can occur between objects on intersecting solar system orbits can generate shock-induced deformations and transformations, creating new mineral phases or melting old ones. These shock-metamorphic effects affect not only the petrography but the chemical and isotopic properties and the ages of primordial meteoritic materials. A fuller understanding of shock metamorphism and breccia formation in meteorites will be essential not only in the study of early accretion, differentiation, and regolith-evolution processes, but in the characterization of the primordial composition of the accreted material itself.

Stoeffler, D.↗

Infrared circumstellar shells - Origins, and clues to the evolution of massive stars

The infrared fluxes, spatial and spectral characteristics for a sample of 111 supergiant stars of spectral types F0 through M5 are tabulated, and correlations examined with respect to the nature of their circumstellar envelopes. One-fourth of these objects were spatialy resolved by IRAS at 60 microns and possess extended circumstellar shell material, with implied expansion ages of about 10 to the 5th yr. Inferences about the production of dust, mass loss, and the relation of these characteristics of the evolution of massive stars, are discussed.

Stencel, Robert E.↗

LDEF fiber optic exposure experiment

Ten fiber optic cable samples of different types were exposed in low Earth orbit for over 5.5 years on the Long Duration Exposure Facility (LDEF). Four of the samples were mounted externally, and the remaining six were internal, under approximately .5 gc/sq m of aluminum. The experiment was recovered in January of 1990, and laboratory evaluation of the effects of the exposure has continued since. An increase in loss, presumed to be from radiation darkening, aging effects on polymer materials used in cabling, unique contamination effects on connector terminations, and micrometeoroid impacts were observed on some of the samples. In addition, the dependence of sample loss was measured as a function of temperature before and after the flight. All cable samples were functional, and the best exhibited no measurable change in performance, indicating that conventional fiber optic cables can perform satisfactorily in spacecraft. Experimental results obtained to date will be presented and discussed.

Johnston, Alan R.↗