Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “link”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Carrier phase recovery performance for PN-spread TDRSS link with radio-frequency interference

The carrier-phase recovery performance of a Costas loop for a nonlinear satellite channel with uplink and downlink noise is analyzed, and the extension of these results to the case where uplink radio-frequency interference (RFI) is present is considered. The signal format here is binary phase-shift-keyed (BPSK) or unbalanced quaternary phase-shift-keyed (UQPSK), the signals being either the non-return-to-zero (NRZ) or biphase (Manchester) type. With UQPSK, at least one data stream must be PN-spread. The channel comprises additive white Gaussian noise (WGN), a wideband filter, a bandpass nonlinearity and more additive WGN. The RFI being considered is pulsed continuous-wave, pulsed WGN, or a combination of the two. It is noted that the Tracking and Data Relay Satellite System (TDRSS) will be subjected to RFI from certain locations, especially in the S-band of frequencies. The characteristics of this link are generalized to form the assumptions underlying this analysis. The analytical results given include the S-curve of the equivalent loop and the phase-error variance of the linearized loop.

Mckenzie, T. M.↗
NASA NTRS1981

The design of a microstrip antenna array for a UHF space telemetry link

An array of microstrip antenna panels was designed for use on a small instrumented satellite as part of a 400-MHz telemetry link between that satellite and NASA's shuttle spacecraft. A roughly omnidirectional phi-plane pattern was desired. The 1.4-wavelength diameter of the satellite and the various ports and structures on its surface presented strong constraints on the antenna array design. Eight antennas, each one a quarter-wavelength panel with one radiating and one shorted edge, were chosen. A phi-plane pattern ripple of 4.4 dB and a gain of at least 0.1 dB relative to a half-wavelength dipole were realized. The design technique used for the individual antenna panels included the study of feed-point location for impedance matching and the effect of losses in the dielectric. A superposition method was used to synthesize the radiation patterns for different numbers and different excitations of antennas on the satellite.

Post, R. E.↗
NASA NTRS1983

Estimating the Degree of Cross-Linking in Rubber

Degree of cross-linking or network chain concentration of rubber estimated with aid of new method. Quantity is needed in studies of mechanical behavior of rubber. New method is based on finding rubber follows different stress/ strain relationships in extension and retraction. When rubber specimen is stretched to given extension ration and released. Stress-vs-strain curve follows two paths: one for extension and other for retraction.

Fedors, R. F.↗
NASA NTRS1982

Time transfer by IRIG-B time code via dedicated telephone link

Measurements were made of the stability of time transfer by the IRIG-B code over a dedicated telephone link on a microwave system. The short and long term Allan Variance was measured on both types of microwave system, one of which is synchronized, the other having free local oscillators. The results promise a time transfer accuracy of 10 microns. The paper also describes a prototype slave clock designed to detect interference in the IRIG-B code to ensure local time is kept during such interference.

Missout, G.↗
NASA NTRS1981

A Simulation System for Validating the Analytical Prediction of Performance of the Convolutional Encoded and Symbol Interleaved TDRSS S-band Return Link Service in a Pulsed RFI Environment

A hardware integrated convolutional coding/symbol interleaving and integrated symbol deinterleaving/Viterbi decoding simulation system is described. Validation on the system of the performance of the TDRSS S-band return link with BPSK modulation, operating in a pulsed RFI environment is included. The system consists of three components, the Fast Linkabit Error Rate Tester (FLERT), the Transition Probability Generator (TPG), and a modified LV7017B which includes rate 1/3 capability as well as a periodic interleaver/deinterleaver. Operating and maintenance manuals for each of these units are included.

Source record↗
NASA NTRS1980

Prospects for very deep space optical communication using photon-counting links

An investigation is conducted regarding the feasibility to use an optical communication system in connection with space missions involving a study of stars and, possibly, planetary systems in the vicinity of the solar system. A possible candidate for the considered kind of mission would be Barnard's Star, at six light years distance. Pierce et al. (1981), have shown that the capacity of a photon-counting link in the presence of thermal noise at low temperature is essentially the same as for microwave. The conducted investigation assumes the employment of a pulse position modulation scheme limited by technology to approximately 1,000,000 positions. The use of an optical communication system similar to the considered type is found to be very likely for the contemplated kind of space mission.

Posner, E. C.↗
NASA NTRS1982

Inexpensive cross-linked polymeric separators made from water-soluble polymers

Polyvinyl alcohol (PVA), cross-linked chemically with aldehyde reagents, produces membranes which demonstrate oxidation resistance, dimensional stability, low ionic resistivity (less than 0.8 Ohms sq cm), low zincate diffusivity (less than 1 x 10 to the -7th mols/sq cm per min), and low zinc dendrite penetration rate (greater than 350 min) which make them suitable for use as alkaline battery separators. They are intrinsically low in cost, and environmental health and safety problems associated with commercial production appear minimal. Preparation, property measurements, and cell test results in Ni/Zn and Ag/Zn cells are described and discussed.

Hsu, L.-C.↗
NASA NTRS1980

Analytical simulation of nonlinear satellite links

It is noted that performance predictions for nonlinear digital satellite channels are usually obtained by either purely analytical methods or Monte Carlo simulations. When used with other than very simple channel models, however, they become extremely costly. It is shown that, through analytical modeling of the effect of the nonlinearity on the uplink waveform, it is possible to obtain approximate performance predictions with a minimum of computer time. It is also demonstrated that the results agree quite well with Monte Carlo simulations and that significant trade-offs can be performed with this tool. An analytical simulation based on Blachman's (1968) definition of signal x signal, signal x noise, and noise x noise terms is shown to provide the required flexibility for modeling the effect of signal distortions on the link performance and to produce good results over a wide range of nonlinearities and channel conditions.

Braun, W. R.↗
NASA NTRS1982

Microwave intersatellite links for communications satellites

Applications and interface requirements for intersatellite links (ISLs) between commercial communications satellites are reviewed, ranging from ISLs between widely separated satellites to ISLs between clustered satellites. On-board processing architectures for ISLs employing a variety of modulation schemes are described. These schemes include FM remodulation and QPSK regeneration in combination with switching and buffering. The various architectures are compared in terms of complexity, required performance, antenna size, mass, and power.

Welti, G. R.↗
NASA NTRS1983

Linking "Smart" Modules by a Single Channel

System architecture brings order to potentially chaotic situation. New configuration allows many "smart" modules (each containing memory and microprocessor) to be linked by common data channel. Architecture allows each module to carry on operations at own data rate within block of time, while communications between modules occur in strict synchronism.

Kohl, W. H.↗
NASA NTRS1982

Low temperature cross linking polyimides

A polyimide is formed by cross linking a prepolymer formed by reacting a polyfunctional ester, a polyfunctional amine, and an end-capping unit. By providing an end-capping unit, the prepolymer is curable at a relatively low temperature of about 175 to 245 C.

Serafini, T. T.↗
NASA NTRS1982

Probing the presently tenuous link between comets and the origin of life

The possibilities of using millimeter-wave technology to probe the subsurface processes of comets to investigate links between cometary materials and the origins of life are explored. It is noted that current theories hold that the necessities for life to begin comprise a fairly uniform temperature, the presence of a solvent to give materials mobility, and the presence of atoms which can form long chains of molecules. Consideration is given to two cometary nuclei models: a core with an equal amount of liquid water and lunar material, and a nucleus with equal amounts of frozen water ice and lunar material. Solutions to the radiative transfer equation for the two models are presented to characterize identifiable emissions using radiometric spectrometer instrumentation on a spacecraft. Particular species such as OH, CN, HCN, and glycine are expected to be detectable if present.

Hobbs, R. W.↗
NASA NTRS1983

DC-link approach to constant-frequency aircraft power

This paper discusses a hybrid high-power aircraft electrical system that has very difficult and complex operating requirements. Many issues raised in selecting an approach for this application are similar to those that must eventually be addressed for a large all-electric aircraft. The requirements for this specific system are reviewed, a solution for those requirements is proposed, and some explanation is provided for the choice. Because the system requires a substantial amount of 400-Hz power, a dc-link system was selected to provide that power.

Yorksi, D. S.↗
NASA NTRS1983

Linking numbers, spin, and statistics of solitons

The spin and statistics of solitons in the (2 + 1)- and (3 + 1)-dimensional nonlinear sigma models is considered. For the (2 + 1)-dimensional case, there is the possibility of fractional spin and exotic statistics; for 3 + 1 dimensions, the usual spin-statistics relation is demonstrated. The linking-number interpretation of the Hopf invariant and the use of suspension considerably simplify the analysis.

Wilczek, F.↗
NASA NTRS1983

Data analysis for dual-polarized communication link experiments

The effect of the propagation medium on the performance of dual-polarized radio links operating in the microwave and millimeter wave regions is analyzed, with particular reference to rain and ice depolarization. Three methods of displaying measured cross-polarization discrimination (XPD) versus the attenuation (A) are examined: mean, median, and equiprobable. The mean and median values are shown to be essentially the same, while equiprobable data are sensitive to many errors. Ice depolarization alone or imbedded in rain depolarization can shift the entire XPD vs A relationship for equiprobable data. It is concluded that XPD vs A sets from different experiments can be compared with confidence when mean and median values are used. However, caution must be exercised with equipotential data sets, particularly when ice effects are involved.

Stutzman, W. L.↗
NASA NTRS1984

The relationship of rain-induced cross-polarization discrimination to attenuation for 10 to 30 GHz earth-space radio links

Rain depolarization is quantified through the cross-polarization discrimination (XPD) versus attenuation relationship. Such a relationship is derived by curve fitting to a rigorous theoretical model (the multiple scattering model) to determine the variation of the parameters involved. This simple isolation model (SIM) is compared to data from several earth-space link experiments and to three other models.

Stutzman, W. L.↗
NASA NTRS1986

Laser Links for Instrumentation Systems

Laser Links eliminate costly cables connecting sensors to data-collection centers. Data-transmission scheme uses laser-based communication systems instead of cables. Sensor data transmitted by semiconductor-diode lasers effective over line-of-sight distances of up to several hundred meters. Use of lasers instead of cables simplifies number of installations.

Bailey, P. S.↗
NASA NTRS1984

The computer-communication link for the innovative use of Space Station

The potential capability of the computer-communications system link of space station is related to innovative utilization for industrial applications. Conceptual computer network architectures are presented and their respective accommodation of innovative industrial projects are discussed. To achieve maximum system availability for industrialization is a possible design goal, which would place the industrial community in an interactive mode with facilities in space. A worthy design goal would be to minimize the computer-communication management function and thereby optimize the system availability for industrial users. Quasi-autonomous modes and subnetworks are key design issues, since they would be the system elements directly effecting the system performance for industrial use.

Carroll, C. C.↗