Results for “layered networks” — Page 47

DOE OSTI2021

INTREPID program: technology and architecture for next-generation, energy-efficient, hyper-scale data centers [Invited]

The INTREPID program is developing power-efficient coherent optics for package-level integration with future switch integrated circuits as a path to realizing higher-radix switches for flatter networks. The link architecture is underpinned by coherent quadrature phase-shift keying (QPSK) polarization-multiplex transceivers at 200 Gb/s per λ <#comment/> , further enhanced with wavelength division multiplexing (WDM) to enable energy-efficient 800 or 1600 Gb/s inter-switch fiber connections. The technology is compatible with conventional three-level data center designs as well as a two-level data center design introduced here, which includes an added layer of passive, arrayed waveguide grating routers (AWGRs) or WDM circuit switches to further improve the cost, energy efficiency, and latency of the network.

Saleh, Adel A. M. (ORCID:0000000182451136)↗

NASA NTRS1999

Atmospheric Science Experiment for Mars: ATMIS for the Netlander 2005 Mission

ATMIS (Atmospheric and Meteorological Instrumentation System) is a versatile suite of atmospheric instrumentation to be accommodated onboard the Netlander Mission slated for launch in 2005. Four Netlanders are planned to form a geophysical measurement network on the surface of Mars. The atmospheric sciences are among the scientific disciplines benefiting most of the network concept. The goal of the ATMIS instrument is to provide new data on the atmospheric vertical structure, regional and global circulation phenomena, the Martian Planetary Boundary Layer (PBL) and atmosphere-surface interactions, dust storm triggering mechanisms, as well as the climatological cycles of H2O, dust and CO2. To reach the goal of characterization of a number of phenomena exhibiting both spatial and temporal variations, simultaneous observations of multiple variables at spatially displaced sites Deforming a network D are required. The in situ observations made by the ATMIS sensors will be supported by extensive modeling efforts. Additional information is contained in the original extended abstract.

Harri, A.-M.↗

DOE OSTI2021

In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes

High nickel content in LiNi x Co y Mn z O 2 (NCM, x ≥ 0.8, x + y + z = 1) layered cathode material allows high specific energy density in lithium-ion batteries (LIBs). However, Ni-rich NCM cathodes suffer from performance degradation, mechanical and structural instability upon prolonged cell cycling. Although the use of single-crystal Ni-rich NCM can mitigate these drawbacks, the ion-diffusion in large single-crystal particles hamper its rate capability. Herein, we report a strategy to construct an in situ Li 1.4 Y 0.4 Ti 1.6 (PO 4 ) 3 (LYTP) ion/electron conductive network which interconnects single-crystal LiNi 0.88 Co 0.09 Mn 0.03 O 2 (SC-NCM88) particles. The LYTP network facilitates the lithium-ion transport between SC-NCM88 particles, mitigates mechanical instability and prevents detrimental crystalline phase transformation. When used in combination with a Li metal anode, the LYTP-containing SC-NCM88-based cathode enables a coin cell capacity of 130 mAh g -1 after 500 cycles at 5 C rate in the 2.75-4.4 V range at 25 °C. Tests in Li-ion pouch cell configuration (i.e., graphite used as negative electrode active material) demonstrate capacity retention of 85% after 1000 cycles at 0.5 C in the 2.75-4.4 V range at 25 °C for the LYTP-containing SC-NCM88-based positive electrode.

25 ENERGY STORAGE↗

DOE OSTI2021

Supramolecular Self-Assembled Multi-Electron-Acceptor Organic Molecule as High-Performance Cathode Material for Li-Ion Batteries

Organic electrode materials possess many advantages such as low toxicity, sustainability, and chemical/structural tunability toward high energy density. However, to compete with inorganic-based compounds, crucial aspects such as redox potential, capacity, cycling stability, and electronic conductivity need to be improved. Herein, a comprehensive strategy on the molecular design of small organic electron-acceptor-molecule—hexaazatrianthranylene (HATA) embedded quinone (HATAQ) is reported. By introducing conjugated quinone moieties into the electron-deficient hexaazatriphenylene-derivative core, HATAQ with highly extended π-conjugation can yield extra-high capacity for lithium storage, delivering a capacity of 426 mAh g -1 at 200 mA g -1 (0.4C). At an extremely high rate of 10 A g -1 (19C), a reversible capacity of 209 mAh g -1 corresponding to nearly 85% retention is obtained after 1000 cycles. A unique network of unconventional lock-and-key hydrogen bonds in the solid-state facilitates favorable supramolecular 2D layered arrangement, enhancing cycling stability. To the best of the authors’ knowledge, the capacity and rate capability of HATAQ are found to be the best ever reported for organic small-molecule-based cathodes. Finally, these results together with density functional theory studies provide proof-of-concept that the design strategy is promising for the development of organic electrodes with exceptionally high energy density, rate capability, and cycling stability.

25 ENERGY STORAGE↗

DOE OSTI2024

Unveiling mesoscopic structures in distorted lamellar phases through deep learning-based small angle neutron scattering analysis

Hypothesis: The formation of distorted lamellar phases, distinguished by their arrangement of crumpled, stacked layers, is frequently accompanied by the disruption of long-range order, leading to the formation of interconnected network structures commonly observed in the sponge phase. Nevertheless, traditional scattering functions grounded in deterministic modeling fall short of fully representing these intricate structural characteristics. Our hypothesis posits that a deep learning method, in conjunction with the generalized leveled wave approach used for describing structural features of distorted lamellar phases, can quantitatively unveil the inherent spatial correlations within these phases. Experiments and Simulations: This report outlines a novel strategy that integrates convolutional neural networks and variational autoencoders, supported by stochastically generated density fluctuations, into a regression analysis framework for extracting structural features of distorted lamellar phases from small angle neutron scattering data. To evaluate the efficacy of our proposed approach, we conducted computational accuracy assessments and applied it to the analysis of experimentally measured small angle neutron scattering spectra of AOT surfactant solutions, a frequently studied lamellar system. Findings: The findings unambiguously demonstrate that deep learning provides a dependable and quantitative approach for investigating the morphology of wide variations of distorted lamellar phases. It is adaptable for deciphering structures from the lamellar to sponge phase including intermediate structures exhibiting fused topological features. In conclusion, this research highlights the effectiveness of deep learning methods in tackling complex issues in the field of soft matter structural analysis and beyond.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Effect of Oxidation Level on the Interfacial Water at the Graphene Oxide–Water Interface: From Spectroscopic Signatures to Hydrogen-Bonding Environment

Not Available

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1976

Characteristics procedure for supersonic flows including consideration of viscous contributions to flow rotationality

A characteristics procedure has been developed which includes viscous and conductive transport terms normal to streamlines. By introducing the transport terms as corrections, the equations retain their hyperbolic character. The solutions have been developed using an inverse grid scheme in a streamline-normal network. Inclusion of the transport terms enables tracing of shock waves through the supersonic portion of the boundary layer so that shock reflections are well-located. Excellent agreement is obtained with the results of other characteristics procedures and with the experimental pressure distributions for the waisted body of Winter, Smith and Rotta.

Anderson, B. H.↗

NASA NTRS1992

VETA x ray data acquisition and control system

We describe the X-ray Data Acquisition and Control System (XDACS) used together with the X-ray Detection System (XDS) to characterize the X-ray image during testing of the AXAF P1/H1 mirror pair at the MSFC X-ray Calibration Facility. A variety of X-ray data were acquired, analyzed and archived during the testing including: mirror alignment, encircled energy, effective area, point spread function, system housekeeping and proportional counter window uniformity data. The system architecture is presented with emphasis placed on key features that include a layered UNIX tool approach, dedicated subsystem controllers, real-time X-window displays, flexibility in combining tools, network connectivity and system extensibility. The VETA test data archive is also described.

Brissenden, Roger J. V.↗

NASA NTRS1993

VETA X-ray Data Acquisition and Control System

We describe the X-ray Data Acquisition and Control System (XDACS) used together with the X-ray Detection System (XDS) to characterize the X-ray image during testing of the AXAF P1/H1 mirror pair at the MSFC X-ray Calibration Facility. A variety of X-ray data were acquired, analyzed and archived during the testing including: mirror alignment, encircled energy, effective area, point spread function, system housekeeping and proportional counter window uniformity data. The system architecture is presented with emphasis placed on key features that include a layered UNIX tool approach, dedicated subsystem controllers, real-time X-window displays, flexibility in combining tools, network connectivity and system extensibility. The VETA test data archive is also described.

Brissenden, Roger J. V.↗

NASA NTRS1992

VETA x ray data acquisition and control system

We describe the X-ray Data Acquisition and Control System (XDACS) used together with the X-ray Detection System (XDS) to characterize the x-ray image during testing of the AXAF P1/H1 mirror pair at the MSFC X-ray Calibration Facility. A variety of x-ray data were acquired, analyzed, and archived during the testing including: mirror alignment, encircled energy, effective area, point spread function, system housekeeping, and proportional counter window uniformity data. The system architecture will be presented with emphasis placed on key features that include a layered UNIX tool approach, dedicated subsystem controllers, real-time X-window displays, flexibility in combining tools, network connectivity, and system extensibility. The VETA test data archive are also described.

Brissenden, R. J. V.↗

NASA NTRS1994

Learning fuzzy logic control system

The performance of the Learning Fuzzy Logic Control System (LFLCS), developed in this thesis, has been evaluated. The Learning Fuzzy Logic Controller (LFLC) learns to control the motor by learning the set of teaching values that are generated by a classical PI controller. It is assumed that the classical PI controller is tuned to minimize the error of a position control system of the D.C. motor. The Learning Fuzzy Logic Controller developed in this thesis is a multi-input single-output network. Training of the Learning Fuzzy Logic Controller is implemented off-line. Upon completion of the training process (using Supervised Learning, and Unsupervised Learning), the LFLC replaces the classical PI controller. In this thesis, a closed loop position control system of a D.C. motor using the LFLC is implemented. The primary focus is on the learning capabilities of the Learning Fuzzy Logic Controller. The learning includes symbolic representation of the Input Linguistic Nodes set and Output Linguistic Notes set. In addition, we investigate the knowledge-based representation for the network. As part of the design process, we implement a digital computer simulation of the LFLCS. The computer simulation program is written in 'C' computer language, and it is implemented in DOS platform. The LFLCS, designed in this thesis, has been developed on a IBM compatible 486-DX2 66 computer. First, the performance of the Learning Fuzzy Logic Controller is evaluated by comparing the angular shaft position of the D.C. motor controlled by a conventional PI controller and that controlled by the LFLC. Second, the symbolic representation of the LFLC and the knowledge-based representation for the network are investigated by observing the parameters of the Fuzzy Logic membership functions and the links at each layer of the LFLC. While there are some limitations of application with this approach, the result of the simulation shows that the LFLC is able to control the angular shaft position of the D.C. motor. Furthermore, the LFLC has better performance in rise time, settling time and steady state error than to the conventional PI controller. This abstract accurately represents the content of the candidate's thesis. I recommend its publication.

Lung, Leung Kam↗

NASA NTRS2002

Diurnal Cycle of Convection in the East Pacific ITCZ during EPIC-2001

During the last three weeks of September 2001, the EPIC-2001 intensive field campaign focused on studies of deep convection in the ITCZ over the Mexican warm pool region (10N, 95W) of the East Pacific. This study focuses on the pronounced observed diurnal cycle of environmental and convective parameters within the experiment domain. Data from three primary sources are examined: the R/V Ronald H. Brown C-band weather radar, 4-hourly soundings from the Brown and the Global Atmospherics, Inc. National Lightning Detection Network (long range product). Satellite data from TRMM, GOES and OV-1 are also used. The domain boundary layer shows a robust daily evolution of moist enthalpy (as reflect by equivalent potential temperature, theta-e, or wet bulb potential temperature, theta-w), with contributions from changes in both dry and moist entropy. Peak theta-w is found after local nightfall; the average diurnal range of theta-w is approximately 1 deg C. A composite diurnal cycle of convective properties was derived from the C-band volume scans, sampled continuously through the experiment at 10 minute updates. Products derived from the volumetric data include a surface PPI, 15 and 30 dBZ echo top height, vertically integrated liquid, and 6 km (mixed phase region) reflectivity CAPPIs. For almost all products, the parameter means showed virtually no diurnal cycle. However, for the upper-level products, the parameter spectra showed a clear peak in the occurrence of deep/vigorous convection (the "tail end of the distribution") between 7-9 UTC (1-3 AM local), while overall frequency of occurrence peaked later, from 12-15 UTC (6-9 AM local). This represents a daily "outbreak" of isolated deep cells a couple of hours after sunset and subsequent growth, organization and decay through the nighttime hours. The coherence of the diurnal cycle of the convective spectrum is impressive given the wide variety of convective organization observed during the experiment, and given the modulation by passage of 3-5 day easterly waves. While earlier satellite OLR composites suggested an offshore coastal migration of storms into the domain at night, examination of the 150 km and 300 km range radar products showed little evidence of such organization; almost all convection developed "in-place" within the analysis domain. Consistent with the diurnal thermodynamic and microphysical evolution, a clear cycle in cloud-to-ground (CG) lightning occurrence was observed. The local CG diurnal cycle is significantly stronger than the satellite-derived tropical ocean diurnal cycle of total (IC+CG) lightning. Flash rates of 3-4 fl/min were often visually observed after nightfall; these are fairly 'healthy' flash rates for tropical ocean storms, and the domain was qualitatively noted to be unusually lightning-productive by the R/V Brown crew (also consistent with satellite-based climatologies).

Boccippio, Dennis J.↗

DOE OSTI2023

LDRD 22A1059-068FP Tailoring the Properties of Multi-Phase Materials Through the Use of Correlative Microscopy and Machine Learning - Poster

High strength alloys with good ductility, hardness, and toughness are needed to meet stringent design requirements for extreme environments. One complication in this pursuit is the evidence that metals rarely exhibit both high strength and good fracture toughness as the underlying mechanisms work in opposition. An exception to this behavior is found in multiphase alloys that form complex microstructures of mixed phases with variable grain sizes and shapes that provide increased fracture toughness by the arrangement of their constituent elements. We propose to explore this phenomenon using state-of-the-art machine learning (ML) techniques in a new and novel manner to identify and correlate the critical microstructural features in a Titanium-10Vanadium-2Iron-3Aluminum (Ti-10V-2Fe-3Al) alloy that is reported to exhibit high strength and fracture toughness. Additionally, we will employ multiple, complementary characterization techniques such as optical microscopy, electron backscatter diffraction (EBSD), energy dispersive spectroscopy (EDS) and scanning electron microscopy to provide multi-layer, quantitative ground truth measures of the microstructures. This data will be used to train a Convolutional Neural Network (CNN) in a semi-supervised environment to identify key microstructural features such as ? platelet dimensions and locations and ?/? phase boundaries and correlate those features with the strength and toughness. Here the ? and ? nomenclature refers to hexagonal close pack (hcp) and body center cubic (bcc) crystal structures, respectively. Previous work has focused on popular alloys and typically used one characterization technique. This research is focused on a promising titanium alloy, uses multiple complimentary characterization tools to provide precise microstructural information and correlates to improved fracture toughness. The resulting ML tool can be trained for additional microstructural features, different alloy(s), and or target mechanical properties.

36 MATERIALS SCIENCE↗

NASA NTRS2000

An Assessment of Gigabit Ethernet Technology and Its Applications at the NASA Glenn Research Center

This paper describes Gigabit Ethernet and its role in supporting R&D programs at NASA Glenn. These programs require an advanced high-speed network capable of transporting multimedia traffic, including real-time visualization, high- resolution graphics, and scientific data. GigE is a 1 Gbps extension to 10 and 100 Mbps Ethernet. The IEEE 802.3z and 802.3ab standards define the MAC layer and 1000BASE-X and 1000BASE-T physical layer specifications for GigE. GigE switches and buffered distributors support IEEE 802.3x flow control. The paper also compares GigE with ATM in terms of quality of service, data rate, throughput, scalability, interoperability, network management, and cost of ownership.

Bakes, Catherine Murphy↗

DOE OSTI2022

Assessing Physical Relationships Between Atmospheric State, Fluxes, and Boundary Layer Stability at McMurdo Station, Antarctica

Observations at McMurdo Station, Antarctica from 24 November 2015 through 3 January 2017 were used to characterize the physical relationships between boundary layer stability and atmospheric state and fluxes. The basis of this analysis was self-organizing maps (SOMs), a neural network algorithm, used to identify the range of potential temperature profiles present in the twice-daily radiosonde data during the ARM (Atmospheric Radiation Measurement) West Antarctic Radiation Experiment (AWARE) campaign. The SOM identified profiles ranging from strongly stable to weakly stable regimes over the lowest 500 m of the atmosphere. It was found that in the winter (MJJA), moderate and strongly stable regimes occur most frequently (61%), while weakly stable regimes dominate in the summer (DJ, 83.4%). The mechanisms responsible for the dominance of different stability regimes in each season were analyzed to determine why these regimes occur with varying frequency throughout the year. This analysis found that wind speed variations and radiative cooling are responsible for the stability observed in the winter, radiative warming, as well as weaker wind speeds, are responsible for summer weak stability, and stability variations in the transition seasons (FMA, SON) are characterized by a change in sign of net radiation with increasing stability, as wind speed changes little across stability regimes. Low-level jets were observed to occur about 50% of the time below areas of enhanced stability aloft and were observed most frequently in the transition seasons. The boundary layer depth, as determined by the Bulk Richardson number, was found to decrease with increasing stability.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

When van der Waals Met Kagome: A 2D Antimonide with a Vanadium-Kagome Network

2D materials showcase unconventional properties emerging from quantum confinement effects. In this work, a “soft chemical” route allows for the deintercalation of K + from the layered antimonide KV 6 Sb 6 , resulting in the discovery of a new metastable 2D-Kagome antimonide K 0.1(1) V 6 Sb 6 with a van der Waals gap of 3.2 Å. The structure of K 0.1(1) V 6 Sb 6 was determined via the synergistic techniques, including X-ray pair distribution function analysis, advanced transmission electron microscopy, and density functional theory calculations. The K 0.1(1) V 6 Sb 6 compound crystallizes in the monoclinic space group C2/m (a = 9.57(2) Å, b = 5.502(8) Å, c = 10.23(2) Å, β = 97.6(2)°, Z = 2). The [V 6 Sb 6 ] layers in K 0.1(1) V 6 Sb 6 are retained upon deintercalation and closely resemble the layers in the parent compound, yet deintercalation results in a relative shift of the adjacent [V 6 Sb 6 ] layers. The magnetic properties of the K 0.1(1) V 6 Sb 6 phase in the 2–300 K range are comparable to those of KV 6 Sb 6 and another Kagome antimonide KV 3 Sb 5 , consistent with nearly temperature-independent paramagnetism. Electronic band structure calculation suggests a nontrivial band topology with flat bands and opening of band crossing afforded by deintercalation. Transport property measurements reveal a metallic nature for K 0.1(1) V 6 Sb 6 and a low thermal conductivity of 0.6 W K –1 m –1 at 300 K. Additionally, ion exchange in KV 6 Sb 6 via a solvothermal route leads to a successful partial exchange of K + with A + (A = Na, Rb, and Cs). Here, this study highlights the tunability of the layered structure of the KV 6 Sb 6 compound, providing a rich playground for the realization of new 2D materials.

2D↗

NASA NTRS2023

High-Rate Delay Tolerant Networking (HDTN) User Guide Version 1.0

Delay Tolerant Networking (DTN) has been identified as a key technology to enable and facilitate the development and growth of future space networks. Classically, space communications networks are collections of disparate links that are manually managed either point-to-point or use space relays. The accelerating accessibility of space enables a new scaling of space nodes, yet both the manual management of configurations and scheduling and the lack of structure connecting links precisely prohibit scaling. This challenge gives rise to newer and larger classes of communications needs that are met by DTN, which must overcome the disconnection, disruption, latency, and mobility featured in space communications systems. DTN joins the underlying links as an overlay, and can be made to communicate over any protocol stack. The core actions of DTN are store, carry, and forward, where data are stored instead of dropped if there is no immediately available outduct. It does this by taking the DTN unit of data, bundles, and providing necessary layers to adapt these bundles to the underlying transport protocols of choice; these are called convergence layers. DTN's Bundle Protocol (BP) can then be used on top of terrestrial protocol stacks, such as TCP/IP, as well as protocols for space, such as LTP/AOS, all in the same network. For emphasis it is noted that bundles can be of essentially any size, and hence this convergence to lower layers of choice is necessary. Existing DTN implementations have operated in constrained environments with limited resources, resulting in low data speeds. However, as various technologies have advanced, data transfer rates and efficiency have advanced, which has pushed the need for a DTN implementation for ground systems and for spacecraft that is performance-oriented in order to not impose an unnecessary bottleneck. High-rate Delay Tolerant Networking (HDTN) takes advantage of modern hardware platforms to substantially reduce latency and improve throughput compared to today’s DTN operations. The HDTN implementation maintains interoperability with existing deployments of DTN that conform to IETF RFCs 4838, 5050, and 9171. At the same time, HDTN defines a new data format better suited to higher-rate operation. It defines and adopts a massively parallel pipelined and message-oriented architecture, allowing the system to scale gracefully as its resources increase. HDTN’s architecture also supports hooks to replace various processing pipeline elements with specialized hardware accelerators. This offers improved Size, Weight, and Power (SWaP) characteristics while reducing development complexity and cost.

Delay Tolerant Networking↗

NASA NTRS2024

High-Rate Delay Tolerant Networking (HDTN) User Guide Version 1.3.0

Delay Tolerant Networking (DTN) has been identified as a key technology to enable and facilitate the development and growth of future space networks. Classically, space communications networks are collections of disparate links that are manually managed either point-to-point or use space relays. The accelerating accessibility of space enables a new scaling of space nodes, yet both the manual management of configurations and scheduling and the lack of structure connecting links precisely prohibit scaling. This challenge gives rise to newer and larger classes of communications needs that are met by DTN, which must overcome the disconnection, disruption, latency, and mobility featured in space communications systems. DTN joins the underlying links as an overlay, and can be made to communicate over any protocol stack. The core actions of DTN are store, carry, and forward, where data are stored instead of dropped if there is no immediately available outduct. It does this by taking the DTN unit of data, bundles, and providing necessary layers to adapt these bundles to the underlying transport protocols of choice; these are called convergence layers. DTN's Bundle Protocol (BP) can then be used on top of terrestrial protocol stacks, such as TCP/IP, as well as protocols for space, such as LTP/AOS, all in the same network. For emphasis it is noted that bundles can be of essentially any size, and hence this convergence to lower layers of choice is necessary. Existing DTN implementations have operated in constrained environments with limited resources, resulting in low data speeds. However, as various technologies have advanced, data transfer rates and efficiency have advanced, which has pushed the need for a DTN implementation for ground systems and for spacecraft that is performance-oriented in order to not impose an unnecessary bottleneck. High-rate Delay Tolerant Networking (HDTN) takes advantage of modern hardware platforms to substantially reduce latency and improve throughput compared to today’s DTN operations. The HDTN implementation maintains interoperability with existing deployments of DTN that conform to IETF RFCs 4838, 5050, and 9171. At the same time, HDTN defines a new data format better suited to higher-rate operation. It defines and adopts a massively parallel pipelined and message-oriented architecture, allowing the system to scale gracefully as its resources increase. HDTN’s architecture also supports hooks to replace various processing pipeline elements with specialized hardware accelerators. This offers improved Size, Weight, and Power (SWaP) characteristics while reducing development complexity and cost.

Delay Tolerant Networking↗