Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lake”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Investigating Lignin Aggregation and Interactions with Solvents during γ-Valerolactone (GVL) Pretreatment: A Combined Small Angle Neutron Scattering and Molecular Simulations Study

The strong tendency of lignin to aggregate in solution, coupled with limited understanding of how its molecular structure governs this behavior, hinders its effective utilization in biorefineries. Here, in this study, we investigated the solution behavior of lignin extracted from poplar using γ-valerolactone/water (GVL/H2O, 9:1 wt/wt) through combined small-angle neutron scattering (SANS) and molecular dynamics (MD) simulations. Lignin samples obtained at 100 °C (L100) and 120 °C (L120) differed in β–O–4 content, hydroxyl distribution, and S/G ratio, enabling direct assessment of how molecular composition governs solvation and aggregation. SANS showed that L120 formed rigid and elongated cylindrical aggregates at 25 °C that transitioned to more flexible spheroidal structures by 50 °C and remained stable up to 80 °C, whereas L100 adopted globular aggregates that progressively collapsed with increasing temperature. MD simulations reinforced these observations by showing that S-rich (L120-like) oligomers had larger radii of gyration, stronger solvent coordination driven by methoxy groups, and fewer lignin–lignin contacts. In contrast, G-rich (L100-like) oligomers displayed persistent aggregation and lower solubility. Collectively, these results reveal that increased aromatic methoxylation enhances lignin–solvent interactions and suppresses self-association, whereas reduced methoxylation and higher β–O–4 content promote persistent aggregation into colloid-like structures with restricted solvent penetration into the aggregate interior.

biorefinery pretreatment↗
DOE OSTI2025

Enhancing Hydrogen Production from Bioenergy Crops via Photoreforming

Photoreforming perennial bioenergy crops (willow, Miscanthus , and poplar) has the potential to produce H 2 with reduced environmental impacts. To understand the compositional effects of the biomass on the average rate of H 2 production over the first 30 min of reaction ( r H 2 ), the r H 2 values of model biomass component (i.e., cellulose, hemicellulose, and lignin) mixtures were compared with those from the raw biomass. The higher cellulose or hemicellulose content in multicomponent mixtures resulted in higher r H 2 , whereas lignin reduced the hydrogen production rate. However, with raw biomass, the ratio of biomass components alone did not determine the r H 2 via photoreforming, with rates of hydrogen production for different varieties of willow ranging between 1.9 μmol h -1 and 12.3 μmol h -1 , 11.8 μmol h -1 for a poplar, and 6.8 μmol h -1 for a miscanthus biomass. In addition, comparable r H 2 values of raw poplar and its extracted cellulose via an IonoSolv treatment indicated the possibility of using raw biomass materials without delignification for generating H 2 via photoreforming. Importantly, r H 2 was positively correlated with the interaction between water and the biomass, as assessed by NMR relaxation via an examination of the T 1 /T 2 ratio. A stronger water-biomass interaction resulted in a higher r H 2 . Genetic modification of biomass has been suggested as a putative way to improve the r H 2 of biomass with an enhanced interaction with water. This research enhances the understanding of factors influencing H 2 production from lignocellulosic biomass by photoreforming and supports the breeding and management of perennial biomass crops to maximize H 2 yields while minimizing land area requirements.

biomass↗
DOE OSTI2025

Large Hyperfine Coupling Arising from Pseudo- 2 S Ground States in a Series of Lutetium(II) Metallocene Complexes

The synthesis of molecules with strong coupling between electronic and nuclear spins represents an important challenge in molecular quantum information science. Here, we report the synthesis and characterization of the divalent lutetium metallocene complexes Lu(Cp Me 5 )(Cp iPr 5 ) (Cp Me 5 = pentamethylcyclopentadienyl; Cp iPr 5 = pentaisopropylcyclopentadienyl), Lu(Cp iPr 4 Et ) 2 (Cp iPr 4 Et = ethyltetraisopropylcyclopentadienyl), and Lu(Cp iPr 4 ) 2 (Cp iPr 4 = tetraisopropylcyclopentadienyl). The molecular structures of these complexes, as determined through singlecrystal X-ray diffraction, feature a common bent sandwich geometry, with average Cp–Lu–Cp angles ranging from 159.9° to 152.6°. Analysis of continuous-wave electron paramagnetic resonance (EPR) spectra for the complexes reveals nearly isotropic g tensors with only a slight deviation from that of a free electron. Moreover, an extremely large splitting of the eight-line spectra indicates the presence of strong hyperfine coupling, and simulations provide isotropic hyperfine coupling constants of A iso = 4.38, 4.30, and 4.17 GHz across the series, where the value of A iso is found to decrease as the Cp–Lu–Cp angle becomes more acute. Notably, these values are the largest yet observed for any lanthanide complex. Moreover, EPR and computational analysis show that the large values of A iso stem from large s-orbital character up to 41.2% in the corresponding singly occupied molecular orbitals. To our knowledge, this degree of s-character in a molecular orbital is the largest yet reported for an open-shell isolable complex. These results outline a general strategy toward the isolation of paramagnetic molecules with strong hyperfine coupling and highly isotropic doublet electronic ground states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bond Dissociation Energy, Ionization Energy, and Electronic Structure of Thorium Dimer

Diatomic thorium, Th 2 , has been investigated using a laser ablation, supersonic expansion source to produce the molecule and resonant two-photon ionization spectroscopy to measure its bond dissociation energy (BDE) and ionization energy (IE). The molecule has a high density of states in the vicinity of its bond dissociation energy, leading to rapid predissociation as soon as this energy is exceeded. The BDE is identified from this predissociation threshold as D 0 (Th 2 ) = 2.857(7) eV, where the assigned error limit is provided in parentheses in units of the last quoted digit. Similarly, the one-photon ionization threshold has been measured, providing the ionization energy IE(Th 2 ) = 5.042(4) eV. Together with a thermochemical cycle and the atomic ionization energy, these values provide the BDE of the cation, giving D 0 (Th 2 + ) = 4.122(8) eV. Computations show that Th 2 has three nearly degenerate low-lying electronic states (1 3 Σ u + , 1 1 Σ g + , and 1 3 Δ g ) with bonding dominated by 7s and 6d orbitals, indicating predominantly transition-metal-like behavior. The 1 3 Σ u + state exhibits a triple bond, whereas the 1 1 Σ g + and 1 3 Δ g states possess quadruple-bond character and correspondingly shorter bonds. Although 1 3 Σ u + is predicted to be the lowest state without spin–orbit coupling, the large spin–orbit stabilization of the 1 3 Δ g state makes its Ω = 1 g component the ground state. Furthermore, the calculated dissociation energy (2.840 eV) and ionization energy of Th 2 (5.098 eV) are both in excellent agreement with experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Using an Isotope Enabled Mass Balance to Evaluate Existing Land Surface Models

Abstract Land surface models (LSMs) play a crucial role in elucidating water and carbon cycles by simulating processes such as plant transpiration and evaporation from bare soil, yet calibration often relies on comparing LSM outputs of landscape total evapotranspiration ( ET ) and discharge with measured bulk fluxes. Discrepancies in partitioning into component fluxes predicted by various LSMs have been noted, prompting the need for improved evaluation methods. Stable water isotopes serve as effective tracers of component hydrologic fluxes, but data and model integration challenges have hindered their widespread application. Leveraging National Ecological Observation Network measurements of water isotope ratios at 16 US sites over 3 years combined with LSM‐modeled fluxes, we employed an isotope‐enabled mass balance framework to simulate ET isotope values ( δET ) within three operational LSMs (Mosaic, Noah, and VIC) to evaluate their partitioning. Models simulating δET values consistent with observations were deemed more reflective of water cycling in these ecosystems. Mosaic exhibited the best overall performance (Kling‐Gupta Efficiency of 0.28). For both Mosaic and Noah there were robust correlations between bare soil evaporation fraction and error (negative) as well as transpiration fraction and error (positive). We found the point at which errors are smallest ( x ‐intercept of the multi‐site regression) is at a higher transpiration fraction than is currently specified in the models. Which means that transpiration fraction is underestimated on average. Stable isotope tracers offer an additional tool for model evaluation and identifying areas for improvement, potentially enhancing LSM simulations and our understanding of land‐surface hydrologic processes.

58 GEOSCIENCES↗
DOE OSTI2025

Chemical versus physical pressure effects on the structure transition of bilayer nickelates

The observation of high-T c superconductivity (HTSC) in concomitant with pressure-induced orthorhombic-tetragonal structural transition in bilayer La 3 Ni 2 O 7 has sparked hopes of achieving HTSC by stabilizing the tetragonal phase at ambient pressure. Chemical pressure, introduced by replacing La 3+ with smaller rare-earth R 3+ has been considered as a potential route. However, our experimental and theoretical investigation reveals that such substitutions, despite causing lattice contraction, actually produce stronger orthorhombic distortions, requiring higher pressures for the structural transition. A linear extrapolation of P c versus the average size of A-site cations (<$r_A$>), yields a putative critical value of (<$r_A$>) ≈ 1.23 Å for P c ≈ 1 bar. The negative correlation between P c and (<$r_A$>) indicates that replacing La 3+ with smaller R 3+ ions is unlikely to reduce P c to ambient pressure. Instead, substituting La 3+ with larger cations like Sr 2+ or Ba 2+ might be a feasible approach. Our results provide guidance for realizing ambient-pressure HTSC in bilayer nickelates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Global tuning of hadronic interaction models with accelerator-based and astroparticle data

In high-energy and astroparticle physics, event generators play an essential role, even in the simplest data analyses. As analysis techniques become more sophisticated, e.g. based on deep neural networks, their correct description of the observed event characteristics becomes even more important. Physical processes occurring in hadronic collisions are simulated within a Monte Carlo framework. A major challenge is the modeling of hadron dynamics at low momentum transfer, which includes the initial and final phases of every hadronic collision. QCD-inspired phenomenological models used for these phases cannot guarantee completeness or correctness over the full phase space. These models usually include parameters which must be tuned to suitable experimental data. Until now, event generators have been developed and tuned mainly on the basis of data from high-energy physics experiments at accelerators. The wealth of data available from the latest generation of astroparticle experiments has not yet been fully exploited, and in many cases is not satisfactorily described. Both kinds of data sets are complementary as astroparticle experiments provide sensitivity especially to hadrons produced nearly parallel to the collision axis and cover center-of-mass energies up to several hundred TeV, well beyond those reached at colliders so far. In this report, we provide an overview of state-of-the-art event generators and their tuning, including the most relevant inputs from high-energy accelerator and astroparticle experiments. We present a road map that shows, for the first time, how the unified tuning of event generators with accelerator-based and astroparticle data can be performed.

Albrecht, J. [Ruhr U., Bochum, RAPP Ctr.; Ruhr U.,↗
DOE OSTI2026

Convergent evolution of aerobic fermentation through divergent mechanisms acting on key shared glycolytic genes

As the tree of life becomes increasingly accessible to molecular investigations, describing mechanisms underlying evolutionary convergence and constraint will be crucial to understanding diversification. The lineage including the model yeast Saccharomyces cerevisiae evolved aerobic fermentation in part through an ancient whole genome duplication and retention of glycolytic genes. To evaluate glycolytic rates across diverse yeasts, we developed and deployed an extracellular acidification rates (ECAR) assay on 299 species that span more than 400 million years of evolution and identified a clade in the genus Saturnispora that convergently evolved aerobic fermentation. Through comparative genomics and transcriptomics, we found that several glycolytic genes had higher expression and novel cis-regulatory elements in aerobically fermenting Saturnispora species. When the transcription factor required for their activation was deleted in Saturnispora dispora, the mutants had reduced glycolytic rates and increased respiration. Intriguingly, many of the upregulated genes are orthologous to duplicated glycolytic genes in S. cerevisiae. These divergent genetic mechanisms affecting the same set of genes suggest that there are strong evolutionary constraints on how aerobic fermentation can arise.

Horianopoulos, Linda C. [Great Lakes Bioenergy Res↗
DOE OSTI2026

A simulation framework for evaluating electronic order workflows in integrated health records

Electronic health record (EHR) systems are critical to modern healthcare delivery, yet the dynamic workflows that govern electronic order processing remain underexplored. Inefficiencies in these digital pathways can cause delays in care, repetitive workloads, and even patient harm. This study presents a discrete-event simulation framework used to reconstruct and evaluate EHR-based order workflows in a large integrated healthcare system. Using real-world data extracted from the Veterans Health Administration’s Corporate Data Warehouse, the authors mapped order events to standardized state transitions and modeled their progression across different facilities of varying complexity levels. After being calibrated with empirical distributions of transition times and validated against observed time-in-system metrics, the simulation demonstrates close alignment with historical performance. Scenario analyses reveal that resource capacity constraints significantly amplify the impact of electronic order surges, which are reflected in the disproportionate growth in backlogs and processing delays. Adjustments in transition probabilities further increased recirculation and extended workflow paths. Network-based analysis identified Reserved, InProgress, and Completed as structurally critical states that function as hubs within the process network but the transitions in-between also act as major bottlenecks. These results showcased the effectiveness of simulation-based approaches in monitoring EHR order processing performance and evaluating consequences of workflow changes on healthcare network resources planning. The proposed simulation framework provides a scalable data-driven tool to support operational decision-making and improve the efficiency of electronic order management in complex healthcare environments.

Engineering↗
DOE OSTI2025

Subsurface hydrogen, curvature, and strain: lessons from electro-reduction of benzaldehyde on nano-structured Pd catalysts

The unique ability of palladium (Pd) to absorb hydrogen and form a bulk hydride is vital for chemical transformations that involve hydrogenation reactions. Nano-structured Pd catalysts offer a promise of tuning these reaction rates by exploiting variations of reactant binding energies depending on the surface structure and morphological constraints that result in inhomogeneous strain. However, the interplay between the nano-structure of Pd and the ability of Pd to adsorb (and absorb) hydrogen as well as other reactive species needs to be better understood for a rational understanding of competitive chemical transformations at Pd surfaces. We consider the effects of the surface corrugation, strain, and subsurface Pd hydride on the reduction of benzaldehyde to benzyl alcohol in two qualitatively different samples – Pd nanoparticles and Pd gels formed by quasi-one-dimensional chains of these nanoparticles. Our electrochemical measurements and computational modelling suggest that surface concave sites, inherent to Pd gels, facilitate hydrogen transfer to the Pd subsurface region, thus weakening benzaldehyde binding to the surface. This effect is further modulated by the strain, depending on the local coordination environment on the corrugated surface. Furthermore, these findings demonstrate how structurally complex samples in the form of gels provide degrees of freedom for controlling the behavior of metal catalysts that are not available in isolated nanoparticles, which paves the way for new approaches in the design of catalytic materials and synthesis of metal hydrides.

Padavala, Sri Krishna Murthy [University of Minnes↗
DOE OSTI2021

Overlap junctions for superconducting quantum electronics and amplifiers

Due to their unique properties as lossless, nonlinear circuit elements, Josephson junctions lie at the heart of superconducting quantum information processing. Previously, we demonstrated a two-layer, submicrometer-scale overlap junction fabrication process suitable for qubits with long coherence times. Here, we extend the overlap junction fabrication process to micrometer-scale junctions. This allows us to fabricate other superconducting quantum devices. For example, we demonstrate an overlap junction-based Josephson parametric amplifier that uses only two layers. This efficient fabrication process yields frequency-tunable devices with negligible insertion loss, a gain of ∼30 dB, and quantum limited noise performance. Compared to other processes, the overlap junction allows for fabrication with minimal infrastructure, high yield, and state-of-the-art device performance.

Bal, Mustafa (ORCID:0000000307516774)↗
DOE OSTI2026

Activation of methane by U + studied by guided ion beam tandem mass spectrometry and quantum chemistry

Reaction pathways of all products formed in the U + + CH 4 (CD 4 ) reaction were explored as a function of kinetic energy using guided ion beam tandem mass spectrometry and quantum chemical calculations. UH + , UC + , UCH + , UCH 2 + , and UCH 3 + (and their perdeuterated analogues) are formed in endothermic reactions. In both systems, the UCH 2 + (UCD 2 + ) dehydrogenated product was the dominant product in the low-energy region, whereas the UH + (UD + ) hydride product became predominant at high energies. The kinetic energy behavior of the various products is consistent with a common intermediate of H–U + –CH 3 (D–U + –CD 3 ). Here, the kinetic energy dependence of all product cross sections was modeled to obtain experimental bond dissociation energies at 0 K (in eV): D 0 (U + –H) = 2.42 ± 0.10, D 0 (U + –C) = 3.95 ± 0.12, D 0 (U + –CH) = 4.91 ± 0.09, D 0 (U + –CH 2 ) = 4.11 ± 0.04, and D 0 (U + –CH 3 ) = 2.41 ± 0.09. Quantum chemical calculations using the UCCSD(T) and UB3LYP approaches with the cc-pwCVXZ-PP basis set with MDF-60 pseudopotential for U + and the aug-cc-pCVXZ and aug-cc-pVXZ (X = T, Q) basis set for carbon and hydrogen, respectively, validate the experimental bond dissociation energies and outline the potential energy surface for all reactions observed. In addition, spin–orbit corrections of the bond energies for all products were calculated at a CASSCF-CASPT2-RASSI level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancing fire emissions inventories for acute health effects studies: integrating high spatial and temporal resolution data

Daily fire progression information is crucial for public health studies that examine the relationship between population-level smoke exposures and subsequent health events. Issues with remote sensing used in fire emissions inventories (FEI) lead to the possibility of missed exposures that impact the results of acute health effects studies. This paper provides a method for improving an FEI dataset with readily available information to create a more robust dataset with daily fire progression. High temporal and spatial resolution burned area information from two FEI products are combined into a single dataset, and a linear regression model fills gaps in daily fire progression. The combined dataset provides up to 71% more PM 2.5 emissions, 69% more burned area, and 367% more fire days per year than using a single source of burned area information. The FEI combination method results in improved FEI information with no gaps in daily fire emissions estimates. The combined dataset provides a functional improvement to FEI data that can be achieved with currently available data.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2025

Mineral dissolution by dimeric complexes

Mineral dissolution is typically thought to occur by the detachment of monomeric building blocks of the crystal structure, although direct evidence is rare. Using in situ high-speed atomic force microscopy to examine step-edge retreat dynamics at high resolution, we report that the dissolution of gibbsite in alkaline solutions occurs mainly by the release of aluminate dimers, which subsequently dissociate into the monomeric species that dominate the solution. Here, the observed dissolution anisotropy is readily explained by this mechanism, which was further supported by density functional tight-binding simulations of detachment activation energies. Recognition that such polynuclear dissolution mechanisms exist may enable an improved understanding of processes regulating mineral dissolution rates in nature and industry.

atomic force microscopy↗
DOE OSTI2026

Coupled machine learning–ecosystem ensemble models substantially improve predictions of nitrous oxide (N 2 O) fluxes from US croplands

Nitrous oxide (N 2 O) is a potent and persistent greenhouse gas, with rising atmospheric concentrations driven in part by inefficient use of synthetic nitrogen (N) fertilizers in agriculture. Predicting soil N 2 O emissions is challenging due to high spatial and temporal variability arising from complex soil biogeochemical processes. Process-based ecosystem models and standalone machine learning (ML) approaches without extensive site-specific calibration often miss high-emission episodes. Here, we show how an Ensemble Modeling System (EMS) based on outputs from an ensemble of ecosystem models coupled to an ensemble of ML models can improve predictions and understanding of N 2 O fluxes from US cropland. Trained and validated on ~12,000 N 2 O chamber measurements at 17 US Midwest sites (six crops, 35 management practices), the EMS accurately predicted daily fluxes of N 2 O at both training (R 2 = 0.84, RMSE = 16.4 g N ha −1 d −1 ) and held-out testing sites (R 2 = 0.84, RMSE = 6.2 g N ha −1 d −1 ). Analyses identified six dominant N 2 O drivers: soil organic carbon (SOC), NH 4 + , NO 3 - , water-filled pore space, temperature, and aboveground biomass production. Wet, warm soils produced large N 2 O peaks only with sufficient SOC and mineral N; in low-SOC soils, fluxes remained low. Incorporating these drivers into process-based models might significantly improve their predictive capacity. The EMS demonstrates a strong potential to predict N 2 O fluxes at unseen sites, enabling more reliable regional inventories, improved gap-filling where measurements are sparse, and enhanced understanding of mechanisms to advance targeted mitigation strategies in food, feed, and bioenergy crops.

AI↗
DOE OSTI2025

Computational Optimization of 133m Xe Production via Neutron Irradiation in a TRIGA Reactor

Here, the Comprehensive Nuclear-Test-Ban Treaty bans all nuclear tests worldwide. As part of treaty compliance, the concentration of radioactive nuclides in the atmosphere is monitored to detect nuclear weapons tests. Radioactive noble gas fission products, specifically radioxenon, can vent into the atmosphere after a nuclear weapons test, even if the test is well contained underground or underwater. Radioxenon thus serves as a signal for nuclear weapons tests. All atmospheric monitoring systems require samples of radioxenon isotopes for detector calibration, quality control, and certification. Here, we present a novel, improved method for creating samples of 133m Xe via neutron irradiation of 132 Xe in the Washington State University TRIGA reactor. 132 Xe neutron absorption results in either 133 Xe or 133m Xe—thermal neutron absorption results in 133m Xe 12% of the time, while fast neutron absorption (above ~1 MeV) results in 133m Xe ~50% of the time. To optimize the production of 133m Xe via neutron absorption in 132 Xe in the thermal TRIGA reactor, spectral tuning using an irradiation chamber is required to maximize the fraction of fast neutrons being absorbed and minimize the number of thermal neutrons interacting with the 132 Xe. We used MCNP to tally 132 Xe absorptions with the isotopic tally function, flux tallies and neutron attenuation to estimate the number of neutrons reaching the 132 Xe through the irradiation chamber, and the adjoint importance function to improve the source strength estimate. Additionally, we performed a heat transfer analysis for safety considerations. It was determined that the use of a 96% enriched 10 B boron carbide chamber, placed next to the fuel elements in reactor position D8, increases the 133m Xe/ 133 Xe activity ratio from a baseline value of 0.3 to 1.0, a 233% increase. Additionally, it was determined that the alpha heating produced in the boron does not become an unmanageable problem in the Washington State University reactor.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2026

Meta-analysis of North American Arctic and boreal aboveground biomass datasets: assessing accuracy, dynamics, and similarities

The North American arctic and boreal regions (ABRs) are rapidly warming and experiencing intensifying disturbances. Accurately quantifying aboveground biomass (AGB) is critical for understanding the impacts of these changes on the carbon cycle and for designing climate change mitigation strategies. Several AGB maps have been developed for the North American ABRs, including recent contributions from National Aeronautics and Space Administration’s Arctic-Boreal Vulnerability Experiment (ABoVE) campaign. However, these maps differ widely in training data, methodology, and resulting AGB density estimates. Presently, a comprehensive comparative evaluation is lacking, making it difficult for users to select datasets suited to their research or management needs. Here, in this study, we conducted a comparative analysis of nine AGB density datasets across North American ABRs, specifically for Alaska and Canada. We (1) summarized AGB by ecoregion and Canadian provinces, (2) evaluated their accuracy against field-based measurements, (3) analyzed spatial and temporal similarities among datasets, and (4) assessed their ability to capture disturbance (fire and harvest) impacts on AGB. We found substantial variation in regional and local AGB estimates across datasets, with overall accuracy ranging from R 2 = 0.25–0.62 and Bias% from −47.8% to 69.9% when validated against field plots. Despite these differences, most datasets have comparatively consistent spatial patterns in AGB (r > 0.8 for most cases). In contrast, agreement on the temporal patterns of AGB change is generally low. We found datasets with spatial resolutions ⩽300 m are capable of capturing disturbance impacts on AGB dynamics, though sensitivity varies across products. Our findings and dataset summary provide guidance for selecting appropriate AGB datasets for different applications within our study area. Our analysis also highlights the need to decrease map bias and increase capability to detect temporal change to decrease uncertainty of AGB datasets potentially by using training data which is representative of major plant functional types within the mapped area.

ABoVE↗