Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “krypton”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Fluorinated noble-gas cyanides FKrCN, FXeCN, and FXeNC

We report on three new noble-gas molecules, FKrCN, FXeCN, and FXeNC, prepared in low-temperature Kr and Xe matrices. These molecules are made by UV photolysis of FCN in the matrices and subsequent thermal annealing. The FCN precursor is produced by deposition of the matrix gas containing (FCN){sub 3} through a microwave discharge. The new noble-gas molecules are assigned with the help of quantum chemical calculations at the MP2(full) and CCSD(T) levels of theory. Similar Ar compounds (FArCN and FArNC) as well as FKrNC are not found in these experiments, which is in agreement with the calculated energetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scattering of NH{sub 3} and ND{sub 3} with rare gas atoms at low collision energy

We present a theoretical study of elastic and rotationally inelastic collisions of NH{sub 3} and ND{sub 3} with rare gas atoms (He, Ne, Ar, Kr, Xe) at low energy. Quantum close-coupling calculations have been performed for energies between 0.001 and 300 cm{sup −1}. We focus on collisions in which NH{sub 3} is initially in the upper state of the inversion doublet with j = 1, k = 1, which is the most relevant in an experimental context as it can be trapped electrostatically and Stark-decelerated. We discuss the presence of resonances in the elastic and inelastic cross sections, as well as the trends in the inelastic cross sections along the rare gas series and the differences between NH{sub 3} and ND{sub 3} as a colliding partner. We also demonstrate the importance of explicitly taking into account the umbrella (inversion) motion of NH{sub 3} in order to obtain accurate scattering cross sections at low collision energy. Finally, we investigate the possibility of sympathetic cooling of ammonia using cold or ultracold rare gas atoms. We show that some systems exhibit a large ratio of elastic to inelastic cross sections in the cold regime, which is promising for sympathetic cooling experiments. The close-coupling calculations are based on previously reported ab initio potential energy surfaces for NH{sub 3}–He and NH{sub 3}–Ar, as well as on new, four-dimensional, potential energy surfaces for the interaction of ammonia with Ne, Kr, and Xe, which were computed using the coupled-cluster method and large basis sets. We compare the properties of the potential energy surfaces corresponding to the interaction of ammonia with the various rare gas atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Matrix-isolation and ab initio study of HKrCCCl and HXeCCCl

We report on two new noble-gas molecules, HKrCCCl and HXeCCCl, prepared in low-temperature Kr and Xe matrices. These molecules are made by UV photolysis of HCCCl in the matrices and subsequent thermal annealing. The HCCCl precursor is produced by microwave discharge of a mixture of a matrix gas with trichloroethylene (HClC=CCl{sub 2}). The assignments of the new noble-gas molecules are supported by deuteration experiments and quantum chemical calculations at the MP2(full) and CCSD(T) levels of theory with the def2-TZVPPD basis set. No evidence of ClXeCCH, which is computationally reliably stable, is found in the experiments. ClKrCCH as well as the Ar compounds HArCCCl and ClArCCH are not observed either, which is in agreement with the calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Absorption spectroscopy of heavy alkaline earth metals Ba and Sr in rare gas matrices—CCSD(T) calculations and atomic site occupancies

Isolation of the heavier alkaline earth metals Ba and Sr in the solid rare gases (RGs) Ar, Kr, and Xe is analysed with absorption spectroscopy and interpreted partly with the assistance of ab initio calculations of the diatomic M ⋅ RG ground state interaction potentials. The y{sup 1}P←a{sup 1}S resonance transitions in the visible spectral region are used to compare the isolation conditions of these two metal atom systems and calcium. Complex absorption bands were recorded in all three metal atom systems even after extensive sample annealing. Coupled cluster calculations conducted on the ground states of the nine M ⋅ RG diatomics (M = Ca, Sr, and Ba; RG = Ar, Kr, and Xe) at the coupled cluster single, double, and non-iterative triple level of theory revealed long bond lengths (>5 Å) and shallow bound regions (<130 cm{sup −1}). All of the M ⋅ RG diatomics have bond lengths considerably longer than those of the rare gas dimers, with the consequence that isolation of these metal atoms in a single substitutional site of the solid rare gas is unlikely, with the possible exception of Ca/Xe. The luminescence of metal dimer bands has been recorded for Ba and Sr revealing very different behaviours. Resonance fluorescence with a lifetime of 15 ns is observed for the lowest energy transition of Sr{sub 2} while this transition is quenched in Ba{sub 2}. This behaviour is consistent with the absence of vibrational structure on the dimer absorption band in Ba{sub 2} indicating lifetime broadening arising from efficient relaxation to low-lying molecular states. More extensive 2D excitation-emission data recorded for the complex site structures present on the absorption bands of the atomic Ba and Sr systems will be presented in future publications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct growth of graphene on SiC(0001) by KrF-excimer-laser irradiation

In this report, we propose a direct patterning method of graphene on the SiC(0001) surface by KrF-excimer-laser irradiation. In this method, Si atoms are locally sublimated from the SiC surface in the laser-irradiated area, and direct graphene growth is induced by the rearrangement of surplus carbon on the SiC surface. Using Raman microscopy, we demonstrated the formation of graphene by laser irradiation and observed the growth process by transmission electron microscopy and conductive atomic force microscopy. When SiC was irradiated by 5000 shots of the laser beam with a fluence of 1.2 J/cm{sup 2}, two layers of graphene were synthesized on the SiC(0001) surface. The number of graphene layers increased from 2 to 5–7 with an increase in the number of laser shots. Based on the results of conductive-atomic force microscopy measurements, we conclude that graphene formation was initiated from the step area, after which the graphene grew towards the terrace area by further Si evaporation and C recombination with increasing laser irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mutual neutralization of He{sup +} with the anions Cl{sup −}, Br{sup −}, I{sup −}, and SF{sub 6}{sup −}

Mutual neutralization (MN) rate coefficients k{sub MN} for He{sup +} with the anions Cl{sup −}, Br{sup −}, I{sup −}, and SF{sub 6}{sup −} are reported from 300 to 500 K. The measured rate coefficients may contain a contribution from transfer ionization, i.e., double ionization of the anion. The large rate coefficient for He{sup +} + SF{sub 6}{sup −} (2.4 × 10{sup −7} cm{sup 3} s{sup −1} at 300 K) is consistent with earlier polyatomic MN results found to have a reduced mass dependence of μ{sup −1/2}. Neutralization of He{sup +} by the atomic halides follows the trend observed earlier for Ne{sup +}, Ar{sup +}, Kr{sup +}, and Xe{sup +} neutralized by atomic halides, k{sub MN} (Cl{sup −}) < k{sub MN} (Br{sup −}) < k{sub MN} (I{sup −}). Only an upper limit could be measured for the neutralization of He{sup +} by Cl{sup −}. Predictions of the rate coefficients from a previously proposed simple model of atomic–atomic MN results are consistent with the present He{sup +}–halide rate coefficients. The temperature dependences are modestly negative for Br{sup −} and I{sup −}, while that for SF{sub 6}{sup −} is small or negligible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of Ohmic contact on semi-insulating 4H-SiC substrate by laser thermal annealing

The Ni contact layer was deposited on semi-insulating 4H-SiC substrate by magnetron sputtering. The as-deposited samples were treated by rapid thermal annealing (RTA) and KrF excimer laser thermal annealing (LTA), respectively. The RTA annealed sample is rectifying while the LTA sample is Ohmic. The specific contact resistance (ρ{sub c}) is 1.97 × 10{sup −3} Ω·cm{sup 2}, which was determined by the circular transmission line model. High resolution transmission electron microscopy morphologies and selected area electron diffraction patterns demonstrate that the 3C-SiC transition zone is formed in the near-interface region of the SiC after the as-deposited sample is treated by LTA, which is responsible for the Ohmic contact formation in the semi-insulating 4H-SiC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasma mirrors for short pulse KrF lasers

It is demonstrated for the first time that plasma mirrors can be successfully applied for KrF laser systems. High reflectivity up to 70% is achieved by optimization of the beam quality on the plasma mirror. The modest spectral shift and the good reflected beam quality allow its applicability for high power laser systems for which a new arrangement is suggested.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-pulse-repetition-rate UV lasers with the inductance-capacitance discharge stabilisation

Compact high-pulse-repetition-rate XeF and KrF excimer lasers and an N{sub 2} laser with plate electrodes and the inductive-capacitance discharge stabilisation are studied. The composition and pressure of the active medium of lasers are optimised for obtaining the maximum output energy and maximum pulse repetition rate at comparatively low (no more than 19 m s{sup -1}) active-medium flow rates in the interelectrode gap. The pulse repetition rate achieved 4-5 kHz for the relative root-mean-square deviation of the laser pulse energy less than 2%. It is found that the energy of the N{sub 2}-laser pulses changes periodically under the action of acoustic perturbations appearing at high pulse repetition rates. It is shown that the use of the inductance-capacitance stabilisation of the discharge provides the increase in the maximum pulse repetition rate by 0.5-1.5 kHz (depending on the active medium type). It is found that the stability of the output energy and maximum pulse repetition rate depend on the location of preionisation sparks with respect to the gas flow direction. Some ways for the development of the technology of plate electrodes and inductance-capacitance discharge stabilisation are proposed. (lasers)

42 ENGINEERING↗

Amplification of subpico second UV pulses in the multistage GARPUN-MTW Ti:sapphire - KrF laser system

Terawatt 248-nm UV pulses with an energy of 0.62 J, a width of no more than 1ps, and a divergence of 20 {mu}rad have been obtained in the first experiments on the GARPUN-MTW Ti:sapphire - KrF laser system at double-pass amplification of frequency-tripled pulses from the Ti:sapphire front end in wide-aperture electron-beam-pumped KrF amplifiers. The contrast of short pulses relative to the amplified spontaneous emission is found to be {approx}10{sup 6} for energy densities and {approx}10{sup 11} for intensities. The specificity of short-pulse amplification in an active medium with fast population inversion recovery and advantages of amplification of trains of short pulses or short and long pulses are discussed. The peak power of single subpicosecond pulses in this laser system can be increased to 30TW, and the focused beam intensity can be as high as 10{sup 20} W cm{sup -2}. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control of extended high-voltage electric discharges in atmospheric air by UV KrF-laser radiation

Experiments in the commutation of extended ({approx}1-m long) high-voltage (up to 390 kV) electric discharges were carried out with the aid of 100-ns long UV pulses of the GARPUN KrF laser, in which we demonstrated a one-and-a-half-fold lengthening of the discharge gap broken down in the presence of laser illumination. Total control of discharge trajectory along the direction of the laser beam was observed for a radiation energy of {approx}300 mJ (the corresponding intensity I = 5x10{sup 8} W cm{sup -2} and its attendant initial electron density Ne {approx} 10{sup 11} cm{sup -3}) and partial control for an energy of 40 mJ (I = 7x10{sup 7} W cm{sup -2}, Ne {approx} 8x10{sup 9} cm{sup -3}) with a 100% probability of breakdown. We discuss the advantages of employing a UV laser for active lightning protection in comparison with IR lasers and ultrashort-pulse laser systems. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Production of extended plasma channels in atmospheric air by amplitude-modulated UV radiation of GARPUN-MTW Ti : sapphire-KrF laser. Part 2. Accumulation of plasma electrons and electric discharge control

The problem of the production of extended ({approx}1 m) plasma channels is studied in atmospheric air by amplitude-modulated laser pulses of UV radiation, which are a superposition of a subpicosecond USP train amplified in a regenerative KrF amplifier with an unstable confocal resonator and a quasi-stationary lasing pulse. The USPs possess a high (0.2-0.3 TW) peak power and efficiently ionise oxygen molecules due to multiphoton ionisation, and the quasi-stationary lasing pulse, which has a relatively long duration ({approx}100 ns), maintains the electron density at a level n{sub e} = (3-5) Multiplication-Sign 10{sup 14} cm{sup -3} by suppressing electron attachment to oxygen. Experiments in laser triggering of high-voltage electric discharges suggest that the use of combined pulses results in a significant lowering of the breakdown threshold and enables controlling the discharge trajectory with a higher efficiency in comparison with smooth pulses. It was shown that controlled breakdowns may develop with a delay of tens of microseconds relative to the laser pulse, which is many orders of magnitude greater than the lifetime of free electrons in the laser-induced plasma. We propose a mechanism for this breakdown, which involves speeding-up of the avalanche ionisation of the air by negative molecular oxygen ions with a low electron binding energy ({approx}0.5 eV) and a long lifetime ({approx}1 ms), which are produced upon cessation of the laser pulse. (extreme light fields and their applications)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of extended plasma channels in atmospheric air by amplitude-modulated UV radiation of GARPUN-MTW Ti : sapphire-KrF laser. Part 1. Regenerative amplification of subpicosecond pulses in a wide-aperture electron beam pumped KrF amplifier

Regenerative amplification of single and multiple ultrashort subpicosecond UV pulses in a wide-aperture KrF amplifier with an unstable confocal resonator was investigated on the GARPUN-MTW hybrid laser system. Amplitude-modulated 100-ns long UV radiation pulses with an energy of several tens of joules were obtained at the output of the system. The pulses were a combination of a quasi-stationary oscillation pulse and a train of amplified ultrashort pulses (USPs) with a peak power of 0.2-0.3 TW, which exceeded the power of free-running lasing pulse by three orders of magnitude. The population inversion recovery time in the active KrF laser medium was estimated: {tau}{sub c} {<=} 2.0 ns. Trains of USPs spaced at an interval {Delta}t Almost-Equal-To {tau}{sub c} were shown to exhibit the highest amplification efficiency. The production of amplitude-modulated UV pulses opens up the way to the production and maintenance of extended plasma channels in atmospheric air. (extreme light fields and their applications)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ti:sapphire/KrF hybrid laser system generating trains of subterawatt subpicosecond UV pulses

The GARPUN-MTW Ti:sapphire/KrF hybrid laser system is used to investigate different multipass schemes for amplifying trains of ultrashort pulses (USPs) of subpicosecond duration. It is shown that, for an USP repetition period of 3 – 5 ns, which exceeds the gain-medium recovery time (∼2 ns), trains are amplified in the same way as single USPs. Due to this, a train can efficiently extract pump energy from the amplifier and sum energies of individual USPs. The energy of a four-USP train, extracted during four passes through the preamplifier and two passes through the final KrF amplifier (4 + 2 scheme), is saturated at a level of 1.6 J and corresponds to maximum USP peak powers of about 0.6 TW. The energy of amplified spontaneous emission (ASE), on the contrary, rapidly increases at a large total gain length L{sub eff} ≈ 6 m and is approximately equal to the USP energy. In the (4 + 1) and (2 + 2) schemes the USP energy decreases only slightly, to E{sub out} = 1.3 and 1.2 J, and the ASE fraction is reduced to about 10% and 3%, respectively. USP self-focusing leads to multiple laser beam filamentation and a 200-fold local increase in the radiation intensity in filaments, to ∼2 × 10{sup 11} W cm{sup -2}, a level at which the nonlinear loss in the output CaF{sub 2} windows of the KrF amplifier, caused by three-photon absorption, nonlinear scattering, and broadening of the radiation spectrum to a value exceeding the gain band of the KrF laser transition, becomes the main factor determining the saturation of the USP output energy. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral anomalies of the effect of light-induced drift of caesium atoms caused by the velocity dependence of transport collision frequencies

The spectral features of the light-induced drift (LID) velocity of caesium atoms in inert buffer gases are studied theoretically. A strong temperature dependence of the spectral LID line shape of Cs atoms in Ar or Kr atmosphere in the vicinity of T ∼ 1000 K is predicted. It is shown that the anomalous LID of Cs atoms in binary buffer mixtures of two different inert gases can be observed at virtually any (including ambient) temperature, depending on the content of the components in these mixtures. The results obtained make it possible to precisely test the interatomic interaction potentials in the experiments on the anomalous LID. (quantum optics)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical simulation of microwave amplification in a plasma channel produced in a gas via multiphoton ionisation by a femtosecond laser pulse

This paper examines the evolution of a nonequilibrium plasma channel produced in xenon by a femtosecond KrF laser pulse. We demonstrate that such a channel can be used to amplify microwave pulses over times of the order of the relaxation time of the photoelectron energy spectrum in xenon. Using the slowly varying amplitude approximation, we analyse the propagation and amplification of an rf pulse in a plasma channel, in particular when the rf field influences the electron energy distribution function in the plasma. (interaction of laser radiation with matter. laser plasma)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pulsed laser ablation of Ni in vacuum and N{sub 2} atmosphere at various fluences

Mechanisms of Ni ablation in vacuum and N{sub 2} atmosphere at various fluences ranging from 2.1 J cm{sup -2} to 3.4 J cm{sup -2} are studied by using a KrF excimer laser. The formation of various conical microstructures, ripples, large-sized irregular shaped cavities and pits is found. It is shown that no new phases are formed in the case of Ni ablation in vacuum, while new phases of nitrides and nitrooxides appear in the N{sub 2} environment. The microhardness analysis of targets irradiated in vacuum shows a decreasing trend with increasing fluence, whereas in the case of the N{sub 2} environment, a monotonic increase in hardness with increasing fluence is observed. (interaction of laser radiation with matter. laser plasma)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-power, highly stable KrF laser with a 4-kHz pulse repetition rate

An electric-discharge KrF laser (248 nm) with an average output power of 300 W is developed and studied. A number of new design features are related to the use of a laser chamber based on an Al{sub 2}O{sub 3} ceramic tube. A high power and pulse repetition rate are achieved by using a volume discharge with lateral preionisation by the UV radiation of a creeping discharge in the form of a homogeneous plasma sheet on the surface of a plane sapphire plate. Various generators for pumping the laser are studied. The maximum laser efficiency is 3.1%, the maximum laser energy is 160 mJ pulse{sup -1}, and the pulse duration at half maximum is 7.5 ns. In the case of long-term operation at a pulse repetition rate of 4 kHz and an output power of 300 W, high stability of laser output energy (σ ≤ 0.7%) is achieved using an all-solid-state pump system. (lasers)

36 MATERIALS SCIENCE↗