Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Linear functional minimization for inverse modeling

In this paper, we present a novel inverse modeling strategy to estimate spatially distributed parameters of nonlinear models. The maximum a posteriori (MAP) estimators of these parameters are based on a likelihood functional, which contains spatially discrete measurements of the system parameters and spatiotemporally discrete measurements of the transient system states. The piecewise continuity prior for the parameters is expressed via Total Variation (TV) regularization. The MAP estimator is computed by minimizing a nonquadratic objective equipped with the TV operator. We apply this inversion algorithm to estimate hydraulic conductivity of a synthetic confined aquifer from measurements of conductivity and hydraulic head. The synthetic conductivity field is composed of a low-conductivity heterogeneous intrusion into a high-conductivity heterogeneous medium. Our algorithm accurately reconstructs the location, orientation, and extent of the intrusion from the steady-state data only. Finally, addition of transient measurements of hydraulic head improves the parameter estimation, accurately reconstructing the conductivity field in the vicinity of observation locations.

47 OTHER INSTRUMENTATION↗

Scalable subsurface inverse modeling of huge data sets with an application to tracer concentration breakthrough data from magnetic resonance imaging

When characterizing subsurface properties is crucial for reliable and cost-effective groundwater supply management and contaminant remediation. With recent advances in sensor technology, large volumes of hydro-geophysical and geochemical data can be obtained to achieve high-resolution images of subsurface properties. However, characterization with such a large amount of information requires prohibitive computational costs associated with “big data” processing and numerous large-scale numerical simulations. To tackle such difficulties, the Principal Component Geostatistical Approach (PCGA) has been proposed as a “Jacobian-free” inversion method that requires much smaller forward simulation runs for each iteration than the number of unknown parameters and measurements needed in the traditional inversion methods. PCGA can be conveniently linked to any multi-physics simulation software with independent parallel executions. In our paper, we extend PCGA to handle a large number of measurements (e.g. 106 or more) by constructing a fast preconditioner whose computational cost scales linearly with the data size. For illustration, we characterize the heterogeneous hydraulic conductivity (K) distribution in a laboratory-scale 3-D sand box using about 6 million transient tracer concentration measurements obtained using magnetic resonance imaging. Since each individual observation has little information on the K distribution, the data was compressed by the zero-th temporal moment of breakthrough curves, which is equivalent to the mean travel time under the experimental setting. Moreover, only about 2,000 forward simulations in total were required to obtain the best estimate with corresponding estimation uncertainty, and the estimated K field captured key patterns of the original packing design, showing the efficiency and effectiveness of the proposed method. This article is protected by copyright. All rights reserved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Waveform inversion of acoustic waves for explosion yield estimation

We present a new waveform inversion technique to estimate the energy of near-surface explosions using atmospheric acoustic waves. Conventional methods often employ air blast models based on a homogeneous atmosphere, where the acoustic wave propagation effects (e.g., refraction and diffraction) are not taken into account, and therefore, their accuracy decreases with increasing source-receiver distance. In this study, three-dimensional acoustic simulations are performed with a finite difference method in realistic atmospheres and topography, and the modeled acoustic Green's functions are incorporated into the waveform inversion for the acoustic source time functions. The strength of the acoustic source is related to explosion yield based on a standard air blast model. The technique was applied to local explosions (<10 km) and provided reasonable yield estimates (<~30% error) in the presence of realistic topography and atmospheric structure. In conclusion, the presented method can be extended to explosions recorded at far distance provided proper meteorological specifications.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Tuning the Photoresponse of Nano-Heterojunction: Pressure-Induced Inverse Photoconductance in Functionalized WO 3 Nanocuboids

Inverse photoconductivity (IPC) is a unique photoresponse behavior that exists in few photoconductors in which electrical conductivity decreases with irradiation, and has great potential applications in the development of photonic devices and nonvolatile memories with low power consumption. However, it is still challenging to design and achieve IPC in most materials of interest. In this study, pressure-driven photoconductivity is investigated in n-type WO3 nanocuboids functionalized with p-type CuO nanoparticles under visible illumination and an interesting pressure-induced IPC accompanying a structural phase transition is found. Native and structural distortion induced oxygen vacancies assist the charge carrier trapping and favor the persistent positive photoconductivity beyond 6.4 GPa. The change in photoconductivity is mainly related to a phase transition and the associated changes in the bandgap, the trapping of charge carriers, the WO6 octahedral distortion, and the electron–hole pair recombination process. A unique reversible transition from positive to inverse photoconductivity is observed during compression and decompression. The origin of the IPC is intimately connected to the depletion of the conduction channels by electron trapping and the chromic property of WO3. This synergistic rationale may afford a simple and powerful method to improve the optomechanical performance of any hybrid material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Winter inverse lake stratification under historic and future climate change

Millions of lakes inversely stratify during winter. Seemingly subtle variations in the duration of winter stratification can have major ecological effects by, for example, altering the vertical distribution of oxygen and nutrients in lakes. Yet, the influence of climate change on winter stratification has been largely unexplored. To fill this knowledge gap, here we used a lake-climate model ensemble to investigate changes in winter stratification from 1901 to 2099 across 12,242 representative lakes situated throughout the Northern Hemisphere. By the end of the 21st century, winter stratification duration is projected to shorten by an average of 18.5–53.9 d under Representative Concentration Pathways (RCPs) 2.6–8.5. Projected changes are faster in warmer geographical regions, in which 35–69% of lakes will no longer inversely stratify by 2070–2099 under RCPs 2.6–8.5. This shortening and loss of winter stratification will likely have numerous implications for lakes, including the misalignment of lifecycle events causing shifts in biodiversity.

54 ENVIRONMENTAL SCIENCES↗

Laser Source Influence on the Preferential Growth and the Inversion Degree in Pulsed Laser CoFe{sub 2}O{sub 4} Films

A comparative study between cobalt ferrite films deposited by pulsed laser deposition as a function of the laser sources, 355 nm (Nd:YAG) and 248 nm (KrF excimer), on amorphous quartz (AQ) and < 100 > -oriented silicon wafer (SW) at different temperatures (650–800 {sup ∘}C) is presented. Also, a quantitative estimation of the preferential crystalline growth orientation as laser source function was made by means of Lotgering factor and Harris texture coefficient, which were obtained from XRD patterns. The inversion degree in spinel-type structure for cobalt ferrite films was calculated through a deconvolution in Raman spectra, where the band A{sub 1g} vibrating modes in tetrahedral sites were associated with Fe and Co sites (687 and 611 cm{sup −1}, respectively). Additionally, saturation magnetization was also calculated from the inversion degree obtained from deconvolution of the Raman spectra in CoFe{sub 2}O{sub 4} films, being compared with experimental results, which is in a good agreement with cobalt ferrite bulk, and we also correlated the preferential growth and the particle size with increment of the coercive field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Well-Posedness of the Iterative Boltzmann Inversion

The iterative Boltzmann inversion is a fixed point iteration to determine an effective pair potential for an ensemble of identical particles in thermal equilibrium from the corresponding radial distribution function. Although the method is reported to work reasonably well in practice, it still lacks a rigorous convergence analysis. In this paper we provide some first steps towards such an analysis, and we show under quite general assumptions that the associated fixed point operator is Lipschitz continuous (in fact, differentiable) in a suitable neighborhood of the true pair potential, assuming that such a potential exists. In other words, the iterative Boltzmann inversion is well-defined in the sense that if the kth iterate of the scheme is sufficiently close to the true pair potential then the k+1st iterate is an admissible pair potential, which again belongs to the domain of the fixed point operator. On our way we establish important properties of the cavity distribution function and provide a proof of a statement formulated by Groeneveld concerning the rate of decay at infinity of the Ursell function associated with a Lennard-Jones type potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solvability of Nonlinear Inverse Problem for Hyperbolic Equation

We consider the nonlinear inverse problem for a second order hyperbolic equation with unknown coefficient depending on the time. We establish the existence and uniqueness of regular solutions which are used for constructing a soltuion to the inverse problem under consideration.

97 MATHEMATICS AND COMPUTING↗

On Distributions of Integral Functionals of Diffusions Stopped at Inverse Range Time

Methods for computing the distributions of integral functionals of diffusions stopped at inverse range time are developed. The moment, which is the minimum of the inverse range time and exponentially distributed stopping time independent of the diffusion, is also considered. An interesting example of the applications of these methods is presented.

97 MATHEMATICS AND COMPUTING↗

Criteria of the Uniqueness of Solutions and Well-Posedness of Inverse Source Problems

In this paper, we study the relation between the well-posedness of the inverse problem of the recovering the source in an abstract differential equation and the basis property of a certain class of function systems in a Hilbert space. As a consequence, based on the results concerning the well-posedness of inverse problems, we obtain the Riesz basis property and—under certain additional conditions—the Bari basis property of such systems.

97 MATHEMATICS AND COMPUTING↗

Partial Orders Based on Inverses Along Elements

The paper introduces and investigates partial orders that are finer than the minus partial order and are based on inverses along an element and other specific outer inverses. It turns out that in this way a number of classical partial orders can be equivalently defined.

97 MATHEMATICS AND COMPUTING↗

An Inverse Factorial Series for a General Gamma Ratio and Related Properties of the Nørlund–Bernoulli Polynomials

The inverse factorial series expansion for the ratio of products of gamma functions whose arguments are linear functions of the variable is found. A recurrence relation for the coefficients in terms of the Nørlund–Bernoulli polynomials is provided, and the half-plane of convergence is determined. The results obtained naturally supplement a number of previous investigations of the gamma ratios, which began in the 1930-ies. The expansion obtained in this paper plays a crucial role in the study of the behavior of the delta-neutral Fox’s H-function in the neighborhood of its finite singular point. A particular case of the inverse factorial series expansion is used in deriving a possibly new identity for the Nørlund–Bernoulli polynomials.

97 MATHEMATICS AND COMPUTING↗

Inverse regression for ridge recovery: a data-driven approach for parameter reduction in computer experiments

Parameter reduction can enable otherwise infeasible design and uncertainty studies with modern computational science models that contain several input parameters. In statistical regression, techniques for sufficient dimension reduction (SDR) use data to reduce the predictor dimension of a regression problem. A computational scientist hoping to use SDR for parameter reduction encounters a problem: a computer prediction is best represented by a deterministic function of the inputs, so data comprised of computer simulation queries fail to satisfy the SDR assumptions. To address this problem, here we interpret SDR methods sliced inverse regression (SIR) and sliced average variance estimation (SAVE) as estimating the directions of a ridge function, which is a composition of a low-dimensional linear transformation with a nonlinear function. Within this interpretation, SIR and SAVE estimate matrices of integrals whose column spaces are contained in the ridge directions’ span; we analyze and numerically verify convergence of these column spaces as the number of computer model queries increases. Moreover, we show example functions that are not ridge functions but whose inverse conditional moment matrices are low-rank. Consequently, the computational scientist should beware when using SIR and SAVE for parameter reduction, since SIR and SAVE may mistakenly suggest that truly important directions are unimportant.

97 MATHEMATICS AND COMPUTING↗

Properties of Equivalent Source Distributions Useful for Inverse Thermal Analysis

A general approach for inverse thermal analysis of heat deposition processes is parametric modeling of such processes using effective or equivalent source distributions (ESDs). ESDs can be adjusted conveniently for calculation of temperature fields, which are constrained according to boundary and temperature constraint conditions. This study applies properties of ESDs useful for parametric modeling of heat deposition processes. Inverse thermal analysis of a friction stir weld is presented, which is prototypical of processes tending to be complex with respect to energy deposition morphology. This analysis demonstrates properties of ESDs providing relatively optimal parametric modeling of energy deposition processes.

36 MATERIALS SCIENCE↗

Simultaneous Improvement of Resolving Power and Signal-to-Noise Ratio Using a Modified Hadamard Transform-Inverse Ion Mobility Spectrometry Technique

In order to improve the resolving power (RP) and signal-to-noise ratio (SNR) of ion mobility spectrometry (IMS) simultaneously, a modified Hadamard transform-inverse ion mobility spectrometry (MHT-IIMS) technique was developed. In this novel technique, a series of isolating codes were appended to each element of the pseudo random binary sequence (PRBS), and then the modified modulation sequence was formed and used to control the ion gate of the inverse IMS (IIMS). Experimental results demonstrate that the MHT-IIMS technique can significantly enhance the resolving power and SNR simultaneously by measuring the spectra of reaction ions. Furthermore, the gas sample CCl{sub 4} and CHCl{sub 3} were measured for evaluating the capability of detecting those samples which have single and multiple product ions. The results show that this novel technique is able to simultaneously improve the resolving power and SNR notablely for the real sample detection without any significant instrumental changes. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evading strength and ductility trade-off in an inverse nacre structured magnesium matrix nanocomposite

Mimicking nacre structure is an often-used strategy for developing materials which combine high strength and high toughness. Here, a novel strategy, named inverse nacre structure, is proposed where elongated and curled soft constituents are embedded in a matrix of hard constituent to form an ordered brick-and-mortar arrangement. This strategy is demonstrated in a particle reinforced metal matrix composite, using pure Mg as the soft phase and SiC nanoparticle reinforced Mg as the hard phase. In this work, the resulting nanocomposite yields high strength, and especially high tensile elongation which is five times that of the homogeneous counterpart. The superior comprehensive strengthening-toughening effect originates from the tailored inverse nacre structure which enables a stable microcrack-multiplication process by sufficiently promoting strain hardening so as to avoid any significant decrease in post-ultimate tensile strength. This strategy, while demonstrated here for the specific case of particle reinforced Mg, is not restricted to any particular material system but constitutes a generic pathway for the development of high-performance materials for engineering applications.

36 MATERIALS SCIENCE↗

Reversing inverse Hall-Petch and direct computation of Hall-Petch coefficients

A 2D bicrystal atomistic model of dislocation transmission through a Σ11<101>{131} symmetric-tilt grain boundary reveals details of Hall-Petch breakdown in the single dislocation regime in Al, Ni, and Cu. Partly based on a previous study, this research determines the stress required for a single dislocation to be transmitted through the Σ11 boundary and finds that single dislocation transmission typically deviates from Hall-Petch behavior because the leading partial dislocation becomes trapped in the boundary and emits glissile grain boundary disconnections that cause boundary sliding deformation at stresses well below boundary transmission stresses. Thus, mechanisms of inverse Hall-Petch, namely grain boundary shear and sliding, are shown to operate in lieu of grain boundary transmission in the single dislocation regime. However, by controlling the applied stresses, inverse Hall-Petch can be reversed and typical Hall- Petch grain boundary transmission regained. This, in turn, allows the direct computation of Hall-Petch coefficients. Further, a second dislocation on the same slip plane preserves typical Hall-Petch behavior for Al and Ni and does not lead to boundary sliding events, thus implying a critical grain size for Hall-Petch breakdown based on the pileup model.

36 MATERIALS SCIENCE↗