Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogen analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Temperature of hydrogen radio frequency plasma under dechlorination process of polychlorinated biphenyls

It has been reported that RF (radio frequency) hydrogen plasmas promote the dechlorination process of PCBs (polychlorinated biphenyls) under irradiation of MW (microwave). A relative emission intensity spectroscope system was used for single-shot imaging of two-dimensional temperature distributions of RF hydrogen plasmas generated in chemical solutions with several mixing ratios of isopropyl alcohol (IPA) and insulation oil under MW irradiation. Our experimental results showed that the plasma generation frequencies for the oil-contaminating solutions were higher than that for the pure IPA solution. In addition, the plasma temperature in the compound liquids including both oil and IPA was higher than that in the pure IPA and oil solutions. A combination of the plasma temperature measurements and plasma composition analysis indicated that the hydrogen radicals generated in a chemical solution containing the equal volumes of IPA and oil were almost the same amounts of H and H{sup +}, while those produced in the other solutions were mainly H.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The structure and electronic properties of tetrahedrally bonded hydrogenated amorphous carbon

In this work, we have synthesized hydrogenated and deuterated amorphous carbon materials that have a density, 2.7 ± 0.1 g/cm 3 , consistent with almost entirely tetrahedral bonding. In hydrogen-free tetrahedral amorphous carbon, the presence of a minority of sp2 bonded atoms leads to localized states that could be passivated with hydrogen by analogy with hydrogenated amorphous silicon. Neutron diffraction analysis demonstrated that the local bonding environment is consistent with ab initio models of high density hydrogenated tetrahedral amorphous carbon and with the related tetrahedral molecular structure neopentane. The optical bandgap of our material, 4.5 eV, is close to the bandgap in the density of states determined by scanning tunneling spectroscopy (4.3 eV). This bandgap is considerably larger than that of hydrogen-free tetrahedral amorphous carbon, confirming that passivation of sp 2 associated tail-states has occurred. Both the structural and electronic measurements are consistent with a model in which the tetrahedrally bonded carbon regions are terminated by hydrogen, causing hopping conductivity to dominate.

36 MATERIALS SCIENCE↗

Hydrogen transport behavior of Timetal-21S alloy

Use is made of the thermogravimetric-analysis method to ascertain the hydrogen-transport characteristics of the Timetal-21S beta-Ti alloy, at pressures of up to 50 torr over the 400-800 C temperature range. Hydrogen solubility is found to be high; the equilibrium hydrogen concentration is noted to deviate from Sievert's law at higher pressures. These deviations are likely associated with hydrogen-induced microstructural changes in the alloy, and the kinetics of hydrogen uptake reflect these changes.

Sankaran, Sankara N.↗

A Model for Hydrogen Thermal Conductivity and Viscosity Including the Critical Point

In order to conduct a thermal analysis of heat transfer to liquid hydrogen near the critical point, an accurate understanding of the thermal transport properties is required. A review of the available literature on hydrogen transport properties identified a lack of useful equations to predict the thermal conductivity and viscosity of liquid hydrogen. The tables published by the National Bureau of Standards were used to perform a series of curve fits to generate the needed correlation equations. These equations give the thermal conductivity and viscosity of hydrogen below 100 K. They agree with the published NBS tables, with less than a 1.5 percent error for temperatures below 100 K and pressures from the triple point to 1000 KPa. These equations also capture the divergence in the thermal conductivity at the critical point

Wagner, Howard A.↗

Performance of Existing Hydrogen Stations

In this presentation, the National Renewable Energy Laboratory presented aggregated analysis results on the performance of existing hydrogen stations, including performance, operation, utilization, maintenance, safety, hydrogen quality, and cost. The U.S. Department of Energy funds technology validation work at NREL through its National Fuel Cell Technology Evaluation Center (NFCTEC).

33 ADVANCED PROPULSION SYSTEMS↗

A PERVASIVE BROAD COMPONENT IN H I EMISSION LINE PROFILES: TEMPERATURE, TURBULENCE, OR A HELIUM SIGNATURE?

Gaussian analysis of interstellar neutral hydrogen emission profiles has revealed a pervasive broad component with a width on the order of 34 km s{sup -1}. When present, this component can most readily be identified in high galactic latitude directions where the H I profiles are either intrinsically weak or simple. Examination of published data reveals that this characteristic line width has been found in a variety of other H I features including compact high-velocity clouds, very-high-velocity clouds, and the Magellanic Stream. When its presence is accounted for in the analysis of H I profiles, other families of line widths at 14 and 6 km s{sup -1} are clearly revealed. Possible mechanisms for producing this broad background component are discussed, including temperature, turbulence, and the critical ionization velocity effect. A line width on the order of 34 km s{sup -1} would imply a kinetic temperature of 24,000 K, too high to keep the gas neutral; hence it should not be observed in H I emission spectra. Turbulent motions could explain a pervasive broad component, but not why it always has the same numerical value in various classes of H I emission line features. The critical ionization velocity effect hypothesis is intriguing because 34 km s{sup -1} is the value for helium. Clearly, this could be a coincidence but the other prominent distribution peaks correspond to two families of critical ionization velocities of abundant interstellar elements including C, N, and O (about 14 km s{sup -1}) and metals (about 6 km s{sup -1}). Unfortunately, the mechanism by which this effect operates, even in laboratory situations, is not clearly understood. It is suggested that further investigation of the distribution of H I component line widths by allowing for the existence of a pervasive broad underlying component may cast a clearer light on this intriguing phenomenon.

74 ATOMIC AND MOLECULAR PHYSICS↗

GASS: THE PARKES GALACTIC ALL-SKY SURVEY. I. SURVEY DESCRIPTION, GOALS, AND INITIAL DATA RELEASE

The Parkes Galactic All-Sky Survey (GASS) is a survey of Galactic atomic hydrogen (H I) emission in the Southern sky covering declinations {delta} {<=} 1{sup 0} using the Parkes Radio Telescope. The survey covers 2{pi} steradians with an effective angular resolution of {approx}16', at a velocity resolution of 1.0 km s{sup -1}, and with an rms brightness temperature noise of 57 mK. GASS is the most sensitive, highest angular resolution survey of Galactic H I emission ever made in the Southern sky. In this paper, we outline the survey goals, describe the observations and data analysis, and present the first-stage data release. The data product is a single cube at full resolution, not corrected for stray radiation. Spectra from the survey and other data products are publicly available online.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of methane and ethane pyrolysis with highly active and durable iron-alumina catalyst to produce hydrogen and valuable nano carbons: Continuous fluidized bed tests and reaction rate analysis

The goal of this research work was to evaluate a novel iron-alumina catalyst for methane and ethane pyrolysis with high conversion rates to H 2 with a long life time to address two major issues reported with previous catalysts. Fluidized bed tests demonstrated continuous hydrogen production while collecting carbon containing fines. During the 230 h fluid bed test the methane conversion rate to hydrogen at 700 °C remained above 80% for 160 h while creating valuable nano carbons. Similarly high catalyst lifetimes with high methane conversions have not been reported before. Ethane was more active than methane for pyrolysis with 100% conversion to H 2 . Transmission electron microscopy and Raman analysis of the carbon showed single and multiwall nanotubes and conglomerate nano-fibers. Ethane did not impact the allotrope of carbon formed. TGA was used to create a data array that was used for kinetic analysis and reaction model parametric regressions. Ethane had a higher rate of pyrolysis that was 2.3–2.8 times that of methane. Ethane pyrolysis was found to be more sensitive to temperature with a higher activation energy of 62 kJ/mol as compared to methane at 43 kJ/mol. The frequency factor, A i , was significantly higher for ethane at 0.73 [[kmol/m 3 -sec]/[N/m2] n ] compared to 0.03 for methane on the same basis. Both gases had a functional partial pressure order dependence of ~0.6 based on the regression analysis.

08 HYDROGEN↗

Characterizing the V-band light-curves of hydrogen-rich type II supernovae

We present an analysis of the diversity of V-band light-curves of hydrogen-rich type II supernovae. Analyzing a sample of 116 supernovae, several magnitude measurements are defined, together with decline rates at different epochs, and time durations of different phases. It is found that magnitudes measured at maximum light correlate more strongly with decline rates than those measured at other epochs: brighter supernovae at maximum generally have faster declining light-curves at all epochs. We find a relation between the decline rate during the 'plateau' phase and peak magnitudes, which has a dispersion of 0.56 mag, offering the prospect of using type II supernovae as purely photometric distance indicators. Our analysis suggests that the type II population spans a continuum from low-luminosity events which have flat light-curves during the 'plateau' stage, through to the brightest events which decline much faster. A large range in optically thick phase durations is observed, implying a range in progenitor envelope masses at the epoch of explosion. During the radioactive tails, we find many supernovae with faster declining light-curves than expected from full trapping of radioactive emission, implying low mass ejecta. It is suggested that the main driver of light-curve diversity is the extent of hydrogen envelopes retained before explosion. Finally, a new classification scheme is introduced where hydrogen-rich events are typed as simply 'SN II' with an 's {sub 2}' value giving the decline rate during the 'plateau' phase, indicating its morphological type.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of the isotope effect on divertor detachment and pedestal structure in DIII-D

Dedicated H-mode hydrogen experiments have been conducted at DIII-D and are compared to similar deuterium plasmas under a range of divertor conditions, revealing significant effects of the isotope mass on divertor and pedestal conditions. H-mode confinement is found to be systematically lower in hydrogen and experiences a worse degradation with increased fueling. This coincides with a higher ne,sep in hydrogen for similar fueling rates. When ne,ped is matched in hydrogen and deuterium as are the ne and Te pedestal structures, the target conditions deviate strongly from each other. An analysis of two major factors in the pedestal structure, pedestal stability and neutral fueling, shows they are not sufficient to explain either the pedestal differences between isotopes or the hydrogen pedestal structure respectively. An analysis of hydrogen and deuterium density ramps demonstrates a 20% higher ion current and a 30% higher upstream density at detachment onset in hydrogen. The characteristics of target heat flux and divertor radiation are shown to change significantly with the isotope mass in each divertor operational regime. The results shown here indicate divertor conditions trend with ion mass in a manner beneficial for divertor performance in future devices.

Mattes, Ray [Univ. of Tennessee, Knoxville, TN (Un↗

Search for the Photoexcitation of Exotic Mesons in the {pi}{sup +}{pi}{sup +}{pi}{sup -} System

A search for exotic mesons in the {pi}{sup +}{pi}{sup +}{pi}{sup -} system photoproduced by the charge exchange reaction {gamma}p{yields}{pi}{sup +}{pi}{sup +}{pi}{sup -}(n) was carried out by the CLAS Collaboration at Jefferson Lab. A tagged-photon beam with energies in the 4.8 to 5.4 GeV range, produced through bremsstrahlung from a 5.744 GeV electron beam, was incident on a liquid-hydrogen target. A partial wave analysis was performed on a sample of 83 000 events, the highest such statistics to date in this reaction at these energies. The main objective of this study was to look for the photoproduction of an exotic J{sup PC}=1{sup -+} resonant state in the 1 to 2 GeV mass range. Our partial wave analysis shows production of the a{sub 2}(1320) and the {pi}{sub 2}(1670) mesons, but no evidence for the a{sub 1}(1260), nor the {pi}{sub 1}(1600) exotic state at the expected levels. An upper limit of 13.5 nb is determined for the exotic {pi}{sub 1}(1600) cross section, less than 2% of the a{sub 2}(1320) production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

National Renewable Energy Laboratory's Hydrogen Technologies and Systems Center is Helping to Facilitate the Transition to a New Energy Future

The Hydrogen Technologies and Systems Center (HTSC) at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) uses a systems engineering and integration approach to hydrogen research and development to help the United States make the transition to a new energy future - a future built on diverse and abundant domestic renewable resources and integrated hydrogen systems.Research focuses on renewable hydrogen production, delivery, and storage; fuel cells and fuel cell manufacturing; technology validation; safety, codes, and standards; analysis; education; and market transformation. Hydrogen can be used in fuel cells to power vehicles and to provide electricity and heat for homes and offices. This flexibility, combined with our increasing demand for energy, opensthe door for hydrogen power systems. HTSC collaborates with DOE, other government agencies, industry, communities, universities, national laboratories, and other stakeholders to promote a clean and secure energy future.

08 HYDROGEN↗

Rapid high density cryogenic pressure vessel filling to 345 bar with a liquid hydrogen pump

Cryogenic pressurized hydrogen (H 2 ) vessels promise maximum storage density with potential to enabling practical H 2 vehicles with maximum driving autonomy and minimum cost of ownership. This paper adds a more complete evaluation of the benefits of cryogenic vessel technology by establishing a methodology for evaluating fill density for any initial vessel thermodynamic state. This is accomplished by assessing 24 cryogenic pressure vessel fill experiments with a liquid hydrogen (LH 2 ) pump manufactured by Linde and installed at the Lawrence Livermore National Laboratory (Livermore, CA) campus. The LH 2 piston pump takes LH 2 from the station Dewar at near ambient pressure (3 bar) and very low temperature (24.6 K) and pressurizes it to the vessel pressure in two stages of compression, up to 875 bar, although the rating of the cryogenic vessel used for these experiments limits fill pressure to 345 bar. Experiments spanned initial vessel temperatures from ambient to 22 K, enabling pump testing over a broad range of conditions. Experimental results validate many of the virtues that make LH 2 pumping a promising technology for H 2 dispensing, both for filling cryogenic as well as ambient temperature vessels: high throughput (1.67 kg/min, 100 kg/h), unlimited capacity for back to back refueling, low electricity consumption at the station due to high density of LH 2 minimizing compression work, and highest fill density, up to 80 g/L (estimated) when dispensing cryogenic hydrogen at 700 + bar. Analysis of the experiments shows that fill density can be predicted with reasonable accuracy (±0.7 g/L) by assuming 10 kJ/kg K cryogenic vessel inlet entropy (pump delivery hose outlet entropy). Fill lines are finally generated on a H 2 phase diagram, producing charts that can be used for rapidly determining fill density for any vessel condition at the moment of fill initiation.

08 HYDROGEN↗

Development of Anti-bacterial PVA/Starch Based Hydrogel Membrane for Wound Dressing

Wound infection is the primary challenge in the wound care management. To facilitate patients, the health care sector is trying to use the modern technology in the field of wound management. Various cellular processes and biological environments are intertwined in the process of wound repair. The compulsion for the modern dressing is not only to cover the wound but also to facilitate the healing rate of wound. In this research, the hydrogel membranes were prepared by crosslinking poly vinyl alcohol (PVA) with starch by using glutaraldehyde. Turmeric was added as an anti-bacterial agent. 0.5 g of turmeric showed the highest anti-bacterial activity among different turmeric contents used. For physical and mechanical characterization, the hydrogel membrane without turmeric (neat hydrogel) and 0.5 g were selected. FTIR of both hydrogel membranes confirmed the presence of free hydroxyl groups. Moreover, hydrogel membrane containing turmeric resulted stronger hydrogen bond interaction. Mechanical analysis of hydrogel membrane revealed sufficient strength to be used as wound dressing. The SEM images evolved that both hydrogel membranes were dense in nature. The swelling behavior values were greater than 100% for both hydrogel membranes. The water vapor transmission rate for 0.5 g turmeric hydrogel membrane was 52.85 g/m{sup 2}h.

36 MATERIALS SCIENCE↗

AN OBSERVATIONAL DETERMINATION OF THE PROTON TO ELECTRON MASS RATIO IN THE EARLY UNIVERSE

In an effort to resolve the discrepancy between two measurements of the fundamental constant mu, the proton to electron mass ratio, at early times in the universe we reanalyze the same data used in the earlier studies. Our analysis of the molecular hydrogen absorption lines in archival Very Large Telescope/Ultraviolet and Visible Echelle Spectrometer (UVES) spectra of the damped Lyman alpha systems in the quasi-stellar objects Q0347-383 and Q0405-443 yields a combined measurement of a DELTAmu/mu value of (-7 +- 8) x 10{sup -6}, consistent with no change in the value of mu over a time span of 11.5 Gyr. Here, we define DELTAmu as (mu {sub z} - mu{sub 0}) where mu {sub z} is the value of mu at a redshift of z and mu{sub 0} is the present-day value. Our null result is consistent with the recent measurements of King et al., DELTAmu/mu = (2.6 +- 3.0) x 10{sup -6}, and inconsistent with the positive detection of a change in mu by Reinhold et al. Both of the previous studies and this study are based on the same data but with differing analysis methods. Improvements in the wavelength calibration over the UVES pipeline calibration is a key element in both of the null results. This leads to the conclusion that the fundamental constant mu is unchanged to an accuracy of 10{sup -5} over the last 80% of the age of the universe, well into the matter dominated epoch. This limit provides constraints on models of dark energy that invoke rolling scalar fields and also limits the parameter space of supersymmetric or string theory models of physics. New instruments, both planned and under construction, will provide opportunities to greatly improve the accuracy of these measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EFFECTS ON SUPERNOVA SHOCK BREAKOUT AND SWIFT LIGHT CURVES DUE TO THE MASS OF THE HYDROGEN-RICH ENVELOPE

Mass loss remains one of the primary uncertainties in stellar evolution. In the most massive stars, mass loss dictates the circumstellar medium and can significantly alter the fate of the star. Mass loss is caused by a variety of wind mechanisms and also through binary interactions. Supernovae (SNe) are excellent probes of this mass loss, both the circumstellar material and the reduced mass of the hydrogen-rich envelope. In this paper, we focus on the effects of reducing the hydrogen-envelope mass on the SN light curve, studying both the shock breakout and peak light-curve emission for a wide variety of mass-loss scenarios. Even though the trends of this mass loss will be masked somewhat by variations caused by different progenitors, explosion energies, and circumstellar media, these trends have significant effects on the SN light curves that should be seen in SN surveys. We conclude with a comparison of our results to a few key observations.

79 ASTRONOMY AND ASTROPHYSICS↗

High-temperature Hydrogen Chloride Releases from Mixtures of Sodium Chloride with Sulfates: Implications for the Chlorine-Mineralogy as Determined by the Sample Analysis at Mars Instrument on the Curiosity Rover in Gale Crater, Mars

Hydrogen chloride releases above 500 °C occurred in several samples analyzed by the Sample Analysis at Mars (SAM) evolved gas analyzer on the Curiosity rover in Gale crater. These have been attributed to reactions between chlorides (original or from oxychlorine decomposition) and water. Some of these HCl releases that peaked below the melting temperature of common chlorides did not co-evolve with oxygen or water, and were not explained by laboratory analog work (Figure 1). Therefore, these HCl releases were not caused by MgCl2 or soley due to reactions between water and melting chlorides. The goal of this work was to explain the HCl releases that did not co-evolve with oxygen or water and occurred below the melting point of common chlorides, which have not been explained by previous laboratory analog work. This work specifically evaluates the role of evolved SO2 in the production of HCl.

Clark, J.V.↗

Analysis of Te and TeO 2 on CdZnTe Nuclear Detectors Treated with Hydrogen Bromide and Ammonium-Based Solutions

Surface defects caused during cutting and polishing in the fabrication of cadmium zinc telluride (CdZnTe) nuclear detectors limit their spectral performance. Chemical treatments are often used to remove surface damages and defects. In this paper, we present the analysis of Te and TeO 2 species on the surfaces of CdZnTe nuclear detectors treated with hydrogen bromide and ammonium-based solutions. The CdZnTe wafers were chemo-mechanically polished in a mixture of hydrogen bromide in hydrogen peroxide and ethylene glycol, followed by a chemical passivation in a mixture of ammonium fluoride and hydrogen peroxide solution. X-ray photoelectron spectroscopy showed significant conversion of Te to TeO 2 , thus producing a more chemically stable surface. The resistivity of the CdZnTe samples is in the order of 1010 ohms-cm. The current for a given applied voltage increased following the passivation and decreased after a 3-hour period. Results from spectral response measurements showed that the 59.5-keV gamma-peak of Am-241 was stable under the same channel for the surface treatment processes.

36 MATERIALS SCIENCE↗