Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generalized additive models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Robust volume calculations for Constructive Solid Geometry (CSG) components in Monte Carlo transport calculations

In this paper we consider a new generalized algorithm for the efficient calculation of component object volumes given their equivalent constructive solid geometry (CSG) definition. The new method relies on domain decomposition to recursively subdivide the original component into smaller pieces with volumes that can be computed analytically or stochastically, if needed. Unlike simpler brute-force approaches, the proposed decomposition scheme is guaranteed to be robust and accurate to within a user-defined tolerance. The new algorithm is also fully general and can handle any valid CSG component definition, without the need for additional input from the user. The new technique has been specifically optimized to calculate volumes of component definitions commonly found in models used for Monte Carlo particle transport simulations for criticality safety and reactor analysis applications. However, the algorithm can be easily extended to any application which uses CSG representations for component objects. The paper provides a complete description of the novel volume calculation algorithm, along with a discussion of the conjectured error bounds on volumes calculated within the method. In addition, numerical results comparing the new algorithm with a standard stochastic volume calculation algorithm are presented for a series of problems spanning a range of representative component sizes and complexities. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Resolving the ($\mathscr{g}$-2)$_μ$ discrepancy with $\mathcal{F}$–SU(5) intersecting D-branes

A discrepancy between the measured anomalous magnetic moment of the muon (g - 2) μ and computed Standard Model value now stands at a combined 4.2σ following experiments at Brookhaven National Lab (BNL) and the Fermi National Accelerator Laboratory (FNAL). A solution to the disagreement is uncovered in flipped SU(5) with additional TeV-Scale vector-like 10 +$\bar{10}$ multiplets and charged singlet derived from local F-Theory, collectively referred to as $\mathcal {F}$-SU(5). Here we engage general No-Scale supersymmetry (SUSY) breaking in $\mathcal {F}$-SU(5) D-brane model building to alleviate the (g-2)μ. tension between the Standard Model and observations. A robust Δa μ (SUSY) is realized via mixing of M 5 and M 1X at the secondary SU(5) x U(1) X unification scale in $\mathcal {F}$-SU(5) emanating from SU(5) breaking and U(1) X flux effects. Calculations unveil Δa μ (SUSY) = 19.0-22.3 x 10 -10 for gluino masses of M($\tilde{g}$ = 2.25-2.56 TeV nd higgsino dark matter, aptly residing within the BNL+FNAL 1σ mean. This (g – 2)μ favorable region of the model space also generates the correct light Higgs boson mass and branching ratios of companion rare decay processes, and is further consistent with all LHC Run 2 constraints. Finally, we also examine the heavy SUSY Higgs boson in light of recent LHC searches for an extended Higgs sector.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

'Minimal Metagravity versus Dark Matter and/or Dark Energy' [Physics of Atomic Nuclei 70, 2148-2151 (2007)]

The minimal metagravity theory, explicitly violating the general covariance but preserving the unimodular one, is applied to study the evolution of the isotropic homogeneous Universe. The massive scalar graviton, contained in the theory in addition to the massless tensor one, is treated as a source of the dark matter and/or dark energy. The modified Friedmann equation for the scale factor of the Universe is derived. The question wether the minimal metagravity can emulate the LCDM concordance model, valid in General Relativity, is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Shape Optimization by Bayesian-Validated Computer-Simulation Surrogates

A nonparametric-validated, surrogate approach to optimization has been applied to the computational optimization of eddy-promoter heat exchangers and to the experimental optimization of a multielement airfoil. In addition to the baseline surrogate framework, a surrogate-Pareto framework has been applied to the two-criteria, eddy-promoter design problem. The Pareto analysis improves the predictability of the surrogate results, preserves generality, and provides a means to rapidly determine design trade-offs. Significant contributions have been made in the geometric description used for the eddy-promoter inclusions as well as to the surrogate framework itself. A level-set based, geometric description has been developed to define the shape of the eddy-promoter inclusions. The level-set technique allows for topology changes (from single-body,eddy-promoter configurations to two-body configurations) without requiring any additional logic. The continuity of the output responses for input variations that cross the boundary between topologies has been demonstrated. Input-output continuity is required for the straightforward application of surrogate techniques in which simplified, interpolative models are fitted through a construction set of data. The surrogate framework developed previously has been extended in a number of ways. First, the formulation for a general, two-output, two-performance metric problem is presented. Surrogates are constructed and validated for the outputs. The performance metrics can be functions of both outputs, as well as explicitly of the inputs, and serve to characterize the design preferences. By segregating the outputs and the performance metrics, an additional level of flexibility is provided to the designer. The validated outputs can be used in future design studies and the error estimates provided by the output validation step still apply, and require no additional appeals to the expensive analysis. Second, a candidate-based a posteriori error analysis capability has been developed which provides probabilistic error estimates on the true performance for a design randomly selected near the surrogate-predicted optimal design.

Patera, Anthony T.↗

Satellite-Assisted Particulate Matter (SAPM) for the Models, In situ, and Remote Sensing of Aerosols (MIRA) Working Group

Models, In situ, and Remote sensing of Aerosols (MIRA) is an international working group that provides a forum for collaborations amongst these three atmospheric aerosol communities. MIRA consists of a collection of interdisciplinary and independently funded Topic/Project groups with clear goals and generally characterized by requests for additional scientific data. The Satellite-Assisted Particulate Matter (SAPM) Topic group focuses on the study of fine particulate matter (PM2.5), as it is a major contributor to air pollution and negatively impacts human health. Our group aims to provide intercomparisons of various methods and techniques for estimating surface PM2.5 assisted by satellite remote sensors (passive and active), global aerosol models, and in situ aerosol measurements. The overall motivation of our work is to enhance PM2.5 coverage beyond in situ ground stations, which can be limited. In this presentation, we provide an overview of various PM2.5 estimation approaches by current SAPM team members, as each approach has its own strengths and limitations. One approach uses near-surface aerosol extinction retrievals from the spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and an assumed value of mass extinction efficiency to derive PM2.5 concentrations (Toth et al 2019). A study using this method found a promising agreement (R=0.60; slope=0.89) with U.S. Environmental Protection Agency (EPA) in situ PM2.5 measurements over the contiguous United States (CONUS) for a 12-year (2007-2018) period (Toth et al 2022). In a different approach combining spaceborne lidar and a model, the Cloud Aerosol Transport System (CATS) lidar and Goddard Earth Observing System (GEOS) model are blended in an ensemble variational assimilation scheme to retrieve aerosol extinction and convert speciated mass concentrations to total PM2.5. A recent study (Matus et al in prep.) found agreement within 2 μg/m3 over the CONUS on the 2016 annual mean when compared to EPA ground-based measurements. Another study explored trends in city aerosol optical depth (AOD) from a spaceborne passive remote sensor, Moderate Resolution Imaging Spectroradiometer (MODIS), and found that these trends agree well with trends in city surface PM2.5, which provides confidence in the use of city AOD for city PM2.5 trend studies (Vohra et al 2021). In a follow-on study, steep and significant trends (~2.5 to 7.8% a-1) in AOD are found for several South Asian cities (e.g., Bangalore and Hyderabad), suggesting rapid growth in PM2.5 (Vohra et al 2022). Also in this presentation, we report results on our current collective SAPM study of India, a country that exhibits high levels of PM2.5 pollution. We show the temporal (i.e., seasonal) and spatial variability of PM2.5 over India using the CALIOP and CATS+model approaches, comparisons between the estimated PM2.5 from the retrieval schemes, and validation with in situ PM2.5 ground-based observations from the Central Pollution Control Board in India. This region provides us with an excellent case study to test our PM2.5 retrievals in heavily polluted scenes and over a complex and varying topography. The SAPM Topic group actively seeks international participants/collaborators in our group, including those working with in situ aerosol measurements (e.g., ACTRIS). We are interested in aerosol datasets in order to either improve our PM2.5 estimates from various approaches (e.g., using in situ mass scattering/absorption coefficient and aerosol hygroscopic properties for various aerosol species) and/or validate the PM2.5 estimates (e.g., using in situ ground-based PM2.5 concentrations).

Travis D Toth↗

Nek5000 developments in support of industry and the NRC

This year, the Nuclear Energy Advanced Modeling Simulation program (NEAMS) thermal-hydraulics verification and validation (V&V) work has focused in three areas of Nek5000 V&V-driven development. First, in a close collaborative effort with the U. S. Nuclear Regulatory Commission (NRC) staff, we have continued V&V efforts for the HYMERES-2 project using the OECD/NEA sponsored testing in the PSI PANDA facility. This year’s focus of ANL-NRC collaboration involves Nek5000 setups and validation for a range of problems relevant to and including the HYMERES-2 benchmark from PSI. The primary outcome of this year efforts is a more efficient geometry and inlet modeling simplification after a careful sensitivity study of the inlet profiles and pipe geometries. The resulting modeling choice of a short recycling/fully-developed turbulent inlet is within the experimental uncertainty estimate. This finding simplifies the next step of the cross-V&V HYMERES-2 project. In addition, the ANL team continue to provide assistance to the NRC staff in the form of Nek5000 application support in general and on the use of the HPC platforms of ALCF and INL in particular. This supports the NRC’s assessment of Nek5000 for use with the NRC Blue CRAB code suite. Second, we have implemented and tested more robust model of URANS, namely the k – τ model, a variant of the k-ω model, along with other improvements to RANS Nek5000 modeling in general. Because of its demonstrated robustness and stability, the k – τ model is the only RANS model that has been implemented in the new GPU version of the Nek5000 code, nekRS. Lastly, we report the initial implementation of Jacobian-free Newton Krylov approach to the direct Newton method for steady fluid solvers aimed at acceleration of RANS modeling and at IC improvement for LES campaigns. Also leveraging the Exascale Computing Project (ECP) ANL/CEED & SMR team’s software development effort to support NEAMS problems at large scale of the advanced computing architectures, NekRS, a GPU variant of Nek5000, built on top of kernels from libParanumal using OCCA for portability, has been successfully run on the full system of Summit (4608 nodes, 27648 GPUs).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Does elevated atmospheric CO 2 affect soil carbon burial and soil weathering in a forest ecosystem?

Most experimental studies measuring the effects of climate change on terrestrial C cycling have focused on processes that occur at relatively short time scales (up to a few years). However, climate-soil C interactions are influenced over much longer time scales by bioturbation and soil weathering affecting soil fertility, ecosystem productivity, and C storage. Elevated CO 2 can increase belowground C inputs and stimulate soil biota, potentially affecting bioturbation, and can decrease soil pH which could accelerate soil weathering rates. To determine whether we could resolve any changes in bioturbation or C storage, we investigated soil profiles collected from ambient and elevated-CO 2 plots at the Free-Air Carbon-Dioxide Enrichment (FACE) forest site at Oak Ridge National Laboratory after 11 years of 13 C-depleted CO 2 release. Profiles of organic carbon concentration, δ 13 C values, and activities of 137 Cs, 210 Pb, and 226 Ra were measured to ~30 cm depth in replicated soil cores to evaluate the effects of elevated CO 2 on these parameters. Bioturbation models based on fitting advection-diffusion equations to 137 Cs and 210 Pb profiles showed that ambient and elevated-CO 2 plots had indistinguishable ranges of apparent biodiffusion constants, advection rates, and soil mixing times, although apparent biodiffusion constants and advection rates were larger for 137 Cs than for 210 Pb as is generally observed in soils. Temporal changes in profiles of δ 13 C values of soil organic carbon (SOC) suggest that addition of new SOC at depth was occurring at a faster rate than that implied by the net advection term of the bioturbation model. Ratios of ( 210 Pb/ 226 Ra) may indicate apparent soil mixing cells that are consistent with biological mechanisms, possibly earthworms and root proliferation, driving C addition and the mixing of soil between ~4 cm and ~18 cm depth. Lastly, burial of SOC by soil mixing processes could substantially increase the net long-term storage of soil C and should be incorporated in soil-atmosphere interaction models.

54 ENVIRONMENTAL SCIENCES↗

On the maximum energy release in flux-rope models of eruptive flares

We determine the photospheric boundary conditions which maximize the magnetic energy released by a loss of ideal-magnetohydrodynamic (MHD) equilibrium in two-dimensional flux-rope models. In these models a loss of equilibrium causes a transition of the flux rope to a lower magnetic energy state at a higher altitude. During the transition a vertical current sheet forms below the flux rope, and reconnection in this current sheet releases additional energy. Here we compute how much energy is released by the loss of equilibrium relative to the total energy release. When the flux-rope radius is small compared to its height, it is possible to obtain general solutions of the Grad-Shafranov equation for a wide range of boundary conditions. Variational principles can then be used to find the particular boundary condition which maximizes the magnetic energy released for a given class of conditions. We apply this procedure to a class of models known as cusp-type catastrophes, and we find that the maximum energy released by the loss of equilibrium is 20.8% of the total energy release for any model in this class. If the additional restriction is imposed that the photospheric magnetic field forms a simple arcade in the absence of coronal currents, then the maximum energy release reduces to 8.6%

Forbes, T. G.↗

Using Taylor Green Vortex to Assess Modeling Turbulence Transition

The Taylor Green Vortex problem is an interesting problem to study the transition from laminar flow to fully developed turbulence. The problem consists initially of large-scale vortices that interact and eventually form smaller vortices that create a cascade of energy from larger scales to smaller scales. This document describes a) when fully developed turbulence occurs, and b) the scale separation in the inertial range. In addition, the resolution needed to capture perturbations in transitional flow is also proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ghosts- and tachyon-free regions of the Randall-Sundrum model parameter space

Model building within the Randall-Sundrum (RS) framework generally involves placing the Standard Model fields in the bulk. Such fields may possess non-zero values for their associated brane-localized kinetic terms (BLKTs) in addition to possible bulk mass parameters. Here in this paper we clearly identify the regions of the RS model parameter space where the presence of bulk mass terms and BLKTs yield a setup which is free from both ghost and tachyon instabilities. Such physically acceptable parameter space regions can then be used to construct realistic and phenomenologically viable RS models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental and ab initio infrared study of chi-, kappa- and alpha-aluminas formed from gibbsite

chi-, kappa- and alpha-alumina phases formed by dehydration of micro-grained gibbsite between 773 and 1573 K are studied using infrared spectroscopy (IR). The structural transitions evidenced by X-ray diffraction (XRD) were interpreted by comparing IR measurements with ab initio simulations (except for the chi form whose complexity does not allow a reliable simulation). For each phase, IR spectrum presents specific bands corresponding to transverse optical (TO) modes of Al-O stretching and bending under 900 cm{sup -1}. The very complex chi phase, obtained at 773 K, provides a distinctive XRD pattern in contrast with the IR absorbance appearing as a broad structure extending between 200 and 900 cm{sup -1} resembling the equivalent spectra for gamma-alumina phase. kappa-alumina is forming at 1173 K and its rich IR spectrum is in good qualitative agreement with ab initio simulations. This complexity reflects the large number of atoms in the kappa-alumina unit cell and the wide range of internuclear distances as well as the various coordinances of both Al and O atoms. Ab initio simulations suggest that this form of transition alumina demonstrates a strong departure from the simple pattern observed for other transition alumina. At 1573 K, the stable alpha-ALPHAl{sub 2}OMICRON{sub 3} develops. Its IR spectra extends in a narrower energy range as compared to transition alumina and presents characteristics features similar to model alpha-ALPHAl{sub 2}OMICRON{sub 3}. Ab initio calculations show again a very good general agreement with the observed IR spectra for this phase. In addition, for both kappa- and alpha-ALPHAl{sub 2}OMICRON{sub 3}, extra modes, measured at high energy (above 790 cm{sup -1} for kappa and above 650 cm{sup -1} for alpha), can originate from either remnant chi-alumina or from surface modes. - Graphical abstract: Infrared spectra of the sequence Gibbsite ->chi->kappa->alpha-Al{sub 2}O{sub 3} obtained from 24 h calcinations of Gibbsite at 773 K, 1173 K, 1273 K and 1573 K. All intensity maxima are normalized at 1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generalized parton distributions of the pion

Generalized Parton Distributions of the pion are evaluated in chiral quark models with the help of double distributions. As a result the polynomiality conditions are automatically satisfied. In addition, positivity constraints, proper normalization and support, sum rules, and soft pion theorems are fulfilled. We obtain explicit expressions holding at the low-energy quark-model scale, which exhibit no factorization in the t-dependence. The crucial QCD evolution of the quark-model distributions is carried out up to experimental or lattice scales. The obtained results for the Parton Distribution Function and the Parton Distribution Amplitude describe the available experimental and lattice data, confirming that the quark-model scale is low, around 320 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Look Inside the Black Box: Using graph-theoretical descriptors to interpret a Continuous-Filter Convolutional Neural Network (CF-CNN) trained on the global and local minimum energy structures of neutral water clusters

A Continuous Filter Convolutional Neural Network (CF-CNN) was trained to predict the potential energy of water cluster networks \ce{(H2O)_{\textit{N}}}, \textit{N}=10--30, corresponding to local minima lying within 5 kcal/mol from the putative minima taken from a newly published database containing over 5 million unique networks. The chemical sampling space of the database was characterized using chemical descriptors derived from graph theory, which led to the identification of important trends in the topology, connectivity, polygon structures associated with the various networks as a function of cluster size. The resulting graphs are available alongside the original database at \url{https://sites.uw.edu/wdbase/}. The CF-CNN trained on a subset of 500,000 networks for (\textit{N}=10, 30) yielded a mean absolute error of 0.002$\pm$0.002 kcal/mol per water molecule, giving the trained CF-CNN the highest accuracy of any neural network-based surrogate model to date. In addition, clusters of sizes not included in the training set exhibited errors of the same magnitude, indicating that the CF-CNN ptotocol is general enough to accurately predict energies of networks for both smaller and larger sizes than those used during training. The graph-theoretical descriptors were developed in order to analyze the properties of the full database and interpret the predictive power of the CF-CNN. Using topology measures, such as the Wiener index and the average shortest path length along with two similarity measures, we showed that all networks from the test set were within the range of the ones from the training set, suggesting that the training set covered the chemical space of interest quite well. Our graph analysis suggests that the mean degree and number of polygons for networks with larger errors tend to lie further from the mean than those with lower errors. The generality of the used CF-CNN was thus demonstrated, while the use of the graph-theoretical descriptors assisted in interpreting the predicted results.

Bilbrey, Jenna A.↗

Magnon interactions in the quantum paramagnetic phase of CoNb 2 O 6

In this work, we study effects of magnon interactions in the excitation spectrum of CoNb 2 O 6 in the quantum paramagnetic phase in transverse field, where the 1/S spin-wave theory exhibits unphysical divergences at the critical field. We propose a self-consistent Hartree-Fock approach that eliminates such unphysical singularities while preserving the integrity of the singular threshold phenomena of magnon decay and spectrum renormalization that are present in both theory and experiment. With the microscopic parameters adopted from previous studies, this method yields a close quantitative agreement with the available experimental data for CoNb 2 O 6 in the relevant regime. Furthermore, insights into the general structure of the spin-anisotropic model of CoNb 2 O 6 and related zigzag chain materials are also provided and a discussion of the effects of additional longitudinal field on the spectrum is given.

1-dimensional spin chains↗

Transgenic Mouse Model of Chronic Beryllium Disease

Animal models provide powerful tools for dissecting dose-response relationships and pathogenic mechanisms and for testing new treatment paradigms. Mechanistic research on beryllium exposure-disease relationships is severely limited by a general inability to develop a sufficient chronic beryllium disease animal model. Discovery of the Human Leukocyte Antigen (HLA) - DPB1Glu69 genetic susceptibility component of chronic beryllium disease permitted the addition of this human beryllium antigen presentation molecule to an animal genome which may permit development of a better animal model for chronic beryllium disease. Using FVB/N inbred mice, Drs. Rubin and Zhu, successfully produced three strains of HLA-DPB1 Glu 69 transgenic mice. Each mouse strain contains a haplotype of the HLA-DPB1 Glu 69 gene that confers a different magnitude of odds ratio (OR) of risk for chronic beryllium disease: HLA-DPB1*0401 (OR = 0.2), HLA-DPB1*0201 (OR = 15), HLA-DPB1*1701 (OR = 240). In addition, Drs. Rubin and Zhu developed transgenic mice with the human CD4 gene to permit better transmission of signals between T cells and antigen presenting cells. This project has maintained the colonies of these transgenic mice and tested the functionality of the human transgenes.

54 ENVIRONMENTAL SCIENCES↗

Atmospheric circulation of hot jupiters: dayside-nightside temperature differences. II. Comparison with observations

The full-phase infrared light curves of low-eccentricity hot Jupiters show a trend of increasing fractional dayside–nightside brightness temperature difference with increasing incident stellar flux, both averaged across the infrared and in each individual wavelength band. The analytic theory of Komacek and Showman shows that this trend is due to the decreasing ability with increasing incident stellar flux of waves to propagate from day to night and erase temperature differences. Here, we compare the predictions of this theory with observations, showing that it explains well the shape of the trend of increasing dayside–nightside temperature difference with increasing equilibrium temperature. Applied to individual planets, the theory matches well with observations at high equilibrium temperatures but, for a fixed photosphere pressure of 100 mbar, systematically underpredicts the dayside–nightside brightness temperature differences at equilibrium temperatures less than 2000 K. We interpret this as being due to the effects of a process that moves the infrared photospheres of these cooler hot Jupiters to lower pressures. We also utilize general circulation modeling with double-gray radiative transfer to explore how the circulation changes with equilibrium temperature and drag strengths. As expected from our theory, the dayside–nightside temperature differences from our numerical simulations increase with increasing incident stellar flux and drag strengths. We calculate model phase curves using our general circulation models, from which we compare the broadband infrared offset from the substellar point and dayside–nightside brightness temperature differences against observations, finding that strong drag or additional effects (e.g., clouds and/or supersolar metallicities) are necessary to explain many observed phase curves.

79 ASTRONOMY AND ASTROPHYSICS↗

The structure and appearance of winds from supercritical accretion disks. I - Numerical models

Equations for the structure and appearance of supercritical accretion disks and the radiation-driven winds which emanate from them are derived and solved by a steady-state hydrodynamic computer code with a relaxation technique used in stellar structure problems. The present model takes into account the mass of the accreting star, the total accretion rate, a generalization of the disk alpha parameter which accounts for heating by processes in addition to viscosity, and the ratio of the total luminosity to the Eddington luminosity. Solutions indicate that for accretion onto a hard-surfaced star, steady, optically thick winds result for even slightly supercritical accretion, and the object will appear as a supergiant star with a high mass loss rate and a nonblackbody spectrum. Winds from black hole accretion disks are expected to depend on the form of the accretion interior to the critical radius, possibly consisting of no ejection at all, a wind similar to that of a hard-surfaced star, or a column of material ejected from a hole in the accretion disk.

Meier, D. L.↗

Some effects of global dust storms on the atmospheric circulation of Mars

A zonally symmetric primitive equation modelled on a sphere is used to numerically simulate the Martian atmosphere's response to various dust loads, as well as the ability of its meridional circulation to transport dust globally, where the circulation is driven by heating due to the absorption of solar and IR radiation by dust and CO2, in addition to sensible heat exchange with the ground. A preliminary experiment shows the model distribution of winds and temperature to compare favorably with zonally averaged values from a general circulation model. Experiments simulating the evolution of global dust storms show that dust is effectively transported by the zonal mean circulation, which rapidly intensifies as the dust spreads, and that the basic structure of the circulation is relatively insensitive to details, being mostly dependent on the heating of the tropical and subtropical atmosphere.

Haberle, R. M.↗