Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “friction-”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Frictional drag between superconducting LaAlO 3 /SrTiO 3 nanowires

Here we report frictional drag measurements between two superconducting LaAlO 3 /SrTiO 3 nanowires. In these experiments, current passing through one nanowire induces a voltage across a nearby electrically isolated nanowire. The frictional drag signal contains both symmetric and anti-symmetric components. The anti-symmetric component arises from the rectification of quantum shot noise in the drive nanowire by the broken symmetry in the drag nanowire. The symmetric component in the drag resistance is ascribed to rectification of thermal noise in the drive nanowire during superconducting-normal transition. The suppression of the symmetric component is observed when a normal nanowire is used as either a drag or drive nanowire with the other nanowire superconducting. The absence of symmetric drag resistance between a normal drag nanowire and a superconducting drive nanowire suggests a higher electron-hole asymmetry in the superconducting LaAlO 3 /SrTiO 3 nanowire arising from the 1D nature of superconductivity at LaAlO 3 /SrTiO 3 interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Instability-Enhanced Collisional Friction Can Determine the Bohm Criterion in Multiple-Ion-Species Plasmas

A generalized Lenard-Balescu theory that accounts for instability-enhanced collective responses is used to calculate the collisional friction between ion species in the plasma-boundary transition region (presheath). Ion-ion streaming instabilities are shown to cause such a strong frictional force that the relative flow speed between ion species cannot significantly exceed the critical threshold value (DELTAV{sub c}) at which instability onset occurs. When combined with the Bohm criterion, this condition uniquely determines the flow speed of each ion species at the plasma-sheath boundary. For cold ions, DELTAV{sub c}->0 and each ion species leaves the plasma at a common system sound speed c{sub s}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vacuum Friction in Rotating Particles

We study the frictional torque acting on particles rotating in empty space. At zero temperature, vacuum friction transforms mechanical energy into light emission and produces particle heating. However, particle cooling relative to the environment occurs at finite temperatures and low rotation velocities. Radiation emission is boosted and its spectrum significantly departed from a hot-body emission profile as the velocity increases. Stopping times ranging from hours to billions of years are predicted for materials, particle sizes, and temperatures accessible to experiment. Implications for the behavior of cosmic dust are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Modelling of the effect of process parameters on tensile strength of friction stir welded aluminium alloy joints

Friction stir welding (FSW) process is a promising solid-state joining process with the potential to join low-melting point material, particularly, aluminium alloy. The most attractive reason for joining aluminium alloy with this process is the avoidance of the solidification defects formed by conventional fusion welding processes. In this article, an attempt has been made to develop an empirical relationship between FSW variables and tensile strength. Central composite rotatable design was used by considering four factor and five levels, which enables to quantify the direct and interactive effect of four numeric factors, that is, tool rotational speed, welding speed, axial force, and tapered pin diameter on the tensile strength. The developed relationship is useful for prediction of tensile strength in friction stir welded AA6082 aluminium alloy joints at 95% confidence level. It will also be helpful for selection of process variable to obtain desired strength of the joint. Furthermore, the optimized capabilities in design-expert software were used to numerically optimize the input parameters. At the optimal parameters, three experiments were conducted to compare the predicted value of tensile strength with the experimental value.

36 MATERIALS SCIENCE↗

JOINING DISSIMILAR MATERIALS USING FRICTION STIR SCRIBE TECHNIQUE

Development of robust and cost effective method of joining dissimilar materials can provide a critical pathway to enable widespread use of multi-material design and components in mainstream industrial applications. The use of multi-material components such as Steel-Aluminum, Aluminum-Polymer allows design engineers to optimize material utilization based on service requirements and often lead weight and cost reductions. However producing an effective joint between materials with vastly different thermal, microstructural and deformation response is highly problematic using conventional joining and /or fastening methods. This is especially challenging in cost sensitive high volume markets that largely rely on low–cost joining solutions. Friction Stir Scribe technology was developed to meet the demands of joining materials with drastically different properties and melting regimes. The process enables joining of light metals like Magnesium and Aluminum to high temperature materials like Steels and Titanium. Additionally viable joints between polymer composites and metal can also be made using this method. This paper will present state of the art, progress made and challenges associated with this innovative derivative of Friction Stir welding in reference to joining dissimilar metals and polymer/metal combinations.

Friction Stir Scribe↗

Effect of microstructural evolution on mechanical and tribological properties of Ti-doped DLC films: How was an ultralow friction obtained?

This paper examined the evolution of microstructure and its effect on the mechanical and tribological properties of ultralow friction Ti-doped diamondlike carbon (DLC) films, by adjusting the CH{sub 4}/Ar ratio under constant radio frequency discharge power and bias. The Raman, high resolution transmission electron microscopy, atomic force microscope and nanoindentation measurements consistently reveal or indicate the formation of curved graphene sheets or fullerenelike nanostructures with increasing CH{sub 4}/Ar ratio. The superior frictional performance (0.008–0.01) of Ti-DLC films can be attributed to the special microstructure related to the development of embedded fullerenelike nanostructures as a result of incorporation of TiO{sub 2} clusters. The contributing factors include high hardness and cohesion, excellent toughness, high load-bearing capacity, as well as the ultralow shear resistance transform layer and the excellent antioxidation stability brought by the doped Ti.

36 MATERIALS SCIENCE↗

Elastic model of dry friction

Friction of elastic bodies is connected with the passing through the metastable states that arise at the contact of surfaces rubbing against each other. Three models are considered that give rise to the metastable states. Friction forces and their dependence on the pressure are calculated. In Appendix A, the contact problem of elasticity theory is solved with adhesion taken into account.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cyclone–anticyclone vortex asymmetry mechanism and linear Ekman friction

Allowance for the linear Ekman friction has been found to ensure a threshold (in rotation frequency) realization of the linear dissipative–centrifugal instability and the related chiral symmetry breaking in the dynamics of Lagrangian particles, which leads to the cyclone–anticyclone vortex asymmetry. An excess of the fluid rotation rate ω{sub 0} over some threshold value determined by the fluid eigenfrequency ω (i.e., ω{sub 0} > ω) is shown to be a condition for the realization of such an instability. A new generalization of the solution of the Karman problem to determine the steady-state velocity field in a viscous incompressible fluid above a rotating solid disk of large radius, in which the linear Ekman friction was additionally taken into account, has been obtained. A correspondence of this solution and the conditions for the realization of the dissipative–centrifugal instability of a chiral-symmetric vortex state and the corresponding cyclone–anticyclone vortex asymmetry has been shown. A generalization of the well-known spiral velocity distribution in an “Ekman layer” near a solid surface has been established for the case where the fluid rotation frequency far from the disk ω differs from the disk rotation frequency ω{sub 0}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Destruction dynamics of a heterogeneous body (diorite) under friction

Triboluminescence bursts are observed in two heterogeneous (diorite) specimens under friction against each other. Triboluminescence appears upon the relaxation of excited free ≡Si–O{sup –} radicals and Fe{sup 3+} ions and the capture of electrons with acceptor traps formed upon the destruction of the plagioclase crystal lattice. The analysis of the time dependence of these bursts shows that the friction surfaces accumulate clusters, in which the concentration of free ≡Si–O{sup –} radicals and electron traps is at least an order of magnitude higher than in their surrounding. The time interval between the appearance of two sequential clusters variates from 0.1 to 1 μs. The linear sizes of clusters are ~0.5 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Internal friction, Young’s modulus, and electrical resistivity of submicrocrystalline titanium

The variation of the internal friction, Young’s modulus, and electrical resistivity of two grades of polycrystalline titanium (VT1-0 and Grade 4) in the area of low temperatures (100–300 K) as depending on the initial structure and subsequent severe plastic deformation converting the material into the submicrocrystalline structural state in relation to the grain size is studied. The maximum of the internal friction is detected in submicrocrystalline titanium, which is interpreted as a Bordoni peak. All the studied characteristics are sensitive indicators for a nonequilibrium state of the grain boundaries after the deformation. The effect of the initial structure of the metal on its properties after the severe deformation is revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanosecond Dynamics of the Destruction of Heterogeneous Natural Bodies by Friction

Abstract—Luminescence caused by friction of heterogeneous solids (basalt and granite) was investigated, the spectra are recorded, and the dynamics of the luminescence intensity were studied. Under friction, the crystal lattices of these bodies are destroyed, and the luminescenting ≡Si–O{sup –} free radicals and Fe{sup 3+} ions and electron traps located on the surface of microcracks are formed. The dynamics of accumulation of microcracks is investigated at a time resolution of 2 ns, and their sizes determined to be about 6–10 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New Aspects of the Fluctuation-Electromagnetic Theory of Friction and Radiative Heat Exchange of Levine–Polevoi–Rytov in a System of Two Parallel Plates

It has been shown that the fundamental results obtained in the works by Levine, Polevoi, and Rytov (1980) and Polevoi (1990) adequately describe the rate of radiative heat exchange and dissipative frictional force in a system of two parallel plates in relative lateral motion. Within the framework of the Levine–Polevoi–Rytov theory, a new expression has been obtained for the force of fluctuation-electromagnetic friction of two plates in the terms of local dielectric permittivities and magnetic permeabilities of the plate materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Friction Stir Spot Welding of DP780 Carbon Steel

Friction stir spot welds were made in uncoated and galvannealed DP780 sheets using polycrystalline boron nitride stir tools. The tools were plunged at either a single continuous rate or in two segments consisting of a relatively high rate followed by a slower rate of shorter depth. Welding times ranged from 1 to 10 s. Increasing tool rotation speed from 800 to 1600 rev min{sup -1} increased strength values. The 2-segment welding procedures also produced higher strength joints. Average lap shear strengths exceeding 10 {center_dot} 3 kN were consistently obtained in 4 s on both the uncoated and the galvannealed DP780. The likelihood of diffusion and mechanical interlocking contributing to bond formation was supported by metallographic examinations. A cost analysis based on spot welding in automobile assembly showed that for friction stir spot welding to be economically competitive with resistance spot welding the cost of stir tools must approach that of resistance spot welding electrode tips.

36 MATERIALS SCIENCE↗

Neutron diffraction measurements of residual stresses in friction stir welding: a review

Significant amounts of residual stresses are often generated during welding and result in critical degradation of the structural integrity and performance of components. Neutron diffraction has become a well established technique for the determination of residual stresses in welds because of the unique deep penetration, three-dimensional mapping capability, and volume averaged bulk measurements characteristic of the scattering neutron beam. Friction stir welding has gained prominence in recent years. The authors reviewed a number of neutron diffraction measurements of residual stresses in friction stir welds and highlighted examples addressing how the microstructures and residual stresses are correlated with each other. An example of in situ neutron diffraction measurement result shows the evolution of the residual stresses during welding.

36 MATERIALS SCIENCE↗

Stability of Y–Ti–O precipitates in friction stir welded nanostructured ferritic alloys

Nanostructured ferritic alloys, which have complex microstructures which consist of ultrafine ferritic grains with a dispersion of stable oxide particles and nanoclusters, are promising materials for fuel cladding and structural applications in the next generation nuclear reactor. This paper evaluates microstructure of friction stir welded nanostructured ferritic alloys using electron microscopy and atom probe tomography techniques. Atom probe tomography results revealed that nanoclusters are coarsened and inhomogeneously distributed in the stir zone and thermomechanically affected zone. Three hypotheses on coarsening of nanoclusters are presented. Finally, the hardness difference in different regions of friction stir weld has been explained.

36 MATERIALS SCIENCE↗

Frictional Coefficients between Aluminum–Silicon Alloy and Cutting Inserts with MPCVD Diamond Coatings

The frictional coefficients at the front and rear surfaces of a VK6 hard-alloy cutter with experimental nano- and microcrystalline CVD diamond coatings applied in microwave plasma are determined by extrapolation to zero cut-layer thickness. It is found that, for diamond coatings with a single microcrystalline layer and those with both a microcrystalline layer and a nanocrystalline layer, the frictional coefficients are less than for an uncoated hard-alloy cutter and also for a cutter with a Sandvik diamond coating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Friction Stir Welding in the Aerospace Industry

Friction stir welding (FSW) is studied as a method of permanent bonding in special aerospace structures made of aluminum, titanium, and magnesium alloys and high-temperature steels. Experimental and industrial equipment for high-speed friction stir welding is presented. A manufacturing technology has been developed for a very hard wear-resistant welding tool of complex shape that is applicable to aviation materials.

36 MATERIALS SCIENCE↗