SEARCH · Engineering Papers

Results for “fourier analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

NASA NTRS1984

LANDSAT-4 horizon scanner performance evaluation

Representative data spans covering a little more than a year since the LANDSAT-4 launch were analyzed to evaluate the flight performance of the satellite's horizon scanner. High frequency noise was filtered out by 128-point averaging. The effects of Earth oblateness and spacecraft altitude variations are modeled, and residual systematic errors are analyzed. A model for the predicted radiance effects is compared with the flight data and deficiencies in the radiance effects modeling are noted. Correction coefficients are provided for a finite Fourier series representation of the systematic errors in the data. Analysis of the seasonal dependence of the coefficients indicates the effects of some early mission problems with the reference attitudes which were computed by the onboard computer using star trackers and gyro data. The effects of sun and moon interference, unexplained anomalies in the data, and sensor noise characteristics and their power spectrum are described. The variability of full orbit data averages is shown. Plots of the sensor data for all the available data spans are included.

Bilanow, S.↗

NASA NTRS1986

Emission FTIR analyses of thin microscopic patches of jet fuel residues deposited on heated metal surfaces

The relationship of fuel stability to fuel composition and the development of mechanisms for deposit formation were investigated. Fuel deposits reduce heat transfer efficiency and increase resistance to fuel flow and are highly detrimental to aircraft performance. Infrared emission Fourier transform spectroscopy was chosen as the primary method of analysis because it was sensitive enough to be used in-situ on tiny patches of monolayers or of only a few molecular layers of deposits which generally proved completely insoluble in any nondestructive solvents. Deposits of four base fuels were compared; dodecane, a dodecane/tetralin blend, commercial Jet A fuel, and a broadened-properties jet fuel particularly rich in polynuclear aromatics. Every fuel in turn was provided with and without small additions of such additives as thiophene, furan, pyrrole, and copper and iron naphthenates.

Lauer, J. L.↗

NASA NTRS2001

Automatic Fringe Detection for Oil Film Interferometry Measurement of Skin Friction

This report summarizes two years of work on investigating algorithms for automatically detecting fringe patterns in images acquired using oil-drop interferometry for the determination of skin friction. Several different analysis methods were tested, and a combination of a windowed Fourier transform followed by a correlation was found to be most effective. The implementation of this method is discussed and details of the process are described. The results indicate that this method shows promise for automating the fringe detection process, but further testing is required.

Naughton, Jonathan W.↗

NASA NTRS2011

Geopotential Field Anomaly Continuation with Multi-Altitude Observations

Conventional gravity and magnetic anomaly continuation invokes the standard Poisson boundary condition of a zero anomaly at an infinite vertical distance from the observation surface. This simple continuation is limited, however, where multiple altitude slices of the anomaly field have been observed. Increasingly, areas are becoming available constrained by multiple boundary conditions from surface, airborne, and satellite surveys. This paper describes the implementation of continuation with multi-altitude boundary conditions in Cartesian and spherical coordinates and investigates the advantages and limitations of these applications. Continuations by EPS (Equivalent Point Source) inversion and the FT (Fourier Transform), as well as by SCHA (Spherical Cap Harmonic Analysis) are considered. These methods were selected because they are especially well suited for analyzing multi-altitude data over finite patches of the earth such as covered by the ADMAP database. In general, continuations constrained by multi-altitude data surfaces are invariably superior to those constrained by a single altitude data surface due to anomaly measurement errors and the non-uniqueness of continuation.

Kim, Jeong Woo↗

NASA NTRS2012

Geopotential Field Anomaly Continuation with Multi-Altitude Observations

Kim, Jeong Woo↗

NASA NTRS2006

Investigation of Post-Flight Solid Rocket Booster Thermal Protection System

After every Shuttle mission, the Solid Rocket Boosters (SRBs) are recovered and observed for missing material. Most of the SRB is covered with a cork-based thermal protection material (MCC-l). After the most recent shuttle mission, STS-114, the forward section of the booster appeared to have been impacted during flight. The darkened fracture surfaces indicated that this might have occurred early in flight. The scope of the analysis included microscopic observations to assess the degree of heat effects and locate evidence of the impact source as well as chemical analysis of the fracture surfaces and recovered foreign material using Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy/Energy Dispersive Spectroscopy. The amount of heat effects and presence of soot products on the fracture surface indicated that the material was impacted prior to SRB re-entry into the atmosphere. Fragments of graphite fibers found on these fracture surfaces were traced to slag inside the Solid Rocket Motor (SRM) that forms during flight as the propellant is spent and is ejected throughout the descent of the SRB after separation. The direction of the impact mark matches with the likely trajectory of SRBs tumbling prior to re-entry.

Nelson, Linda A.↗

NASA NTRS2025

Line List for the A 2 Π−X 2 Σ + and the B 2 Σ + −X 2 Σ + Band Systems of CaF

The spectral analysis of molecule-rich asymptotic giant branch (AGB) stars is challenging. Although other calcium and fluorine bearing molecules are observed in the microwave and in the visible spectrum of AGB stars, CaF has never been detected, despite favorable chemical equilibrium predictions. Yet, measuring the CaF abundance could give more insight into the fluorine budget of AGB stars and allow better simulation of stellar spectra. In this work, we present an analysis of the visible spectrum of CaF obtained with a Fourier transform spectrometer. CaF A 2 Π−X 2 Σ + and the B 2 Σ + −X 2 Σ + band systems were excited with a hollow cathode discharge. Using previous fluorescence spectroscopy measurements, highly accurate ground state constants, and reasonable extrapolation schemes, the strongest features of CaF in the visible spectrum can be accurately modeled for both band systems. Spectroscopic constants are determined for A 2 Π with v ≤ 16 and for B 2 Σ + with v ≤ 20. Ab initio transition dipole moment curves of both transitions were calculated and scaled, and we provide a line list with Einstein A coefficients and oscillator strengths. This line list can be used to simulate spectra of CaF at temperatures and pressures relevant to astrophysical environments.

Léo Lavy↗

DOE OSTI2026

Chemical and Radiological Compatibility Testing of 3D Printed Materials

To dramatically increase the adaptability, performance, and safety of processes in support of the Defense Waste Processing Facility (DWPF), Savannah River National Lab (SRNL) plans to perform chemical and radiological compatibility testing on a wide variety of 3D printed materials of interest. The 3D printing process provides numerous strategic operational benefits such as rapid prototyping of complex designs and geometry specific to the needs of the nuclear waste disposition process, as well as on-demand rapid prototyping and iteration with materials that aren’t as accessible through traditional manufacturing methods. Reaction chemistry in simulated waste batches can be matched closely to its radioactive counterpart, but glass reactor vessels have limitations. Vessel geometry can play a big factor in mixing transport limitations, process chemistry, and degradation reaction kinetics. In addition, additive manufacturing allows for much more detailed vessel design than traditional alternatives. Waste processing techniques in DWPF also encounter extreme chemical environments including high pH, strong acids, abrasive slurries, and significant irradiation. To meet these challenges, a matrix of various polymer, ceramic, and metal additive manufacturing materials have been exposed to a suite of chemical environments of interest as well as radioactive dose (such as gamma radiation from 60 Co) to properly test their durability under these conditions. Mass change has been monitored over a period of up to a week in these conditions, as well as added characterization for surface modification through Scanning Electron Microscopy/Electron Dispersive X-ray analysis (SEM/EDX). Further chemical characterization has been monitored through Fourier-Transform InfraRed Spectroscopy (FTIR), with planned investigation via thermal and tensile strength degradation. While the direct product of this research is identification of material(s) that can withstand specific hazardous environments encountered by the mercury water wash tank in DWPF process simulation experiments, the reference base of materials will be used for many other nuclear processes in the pursuit of rapidly developed, cost-efficient, and highly specific devices for environmental remediation and much more.

Wilson, Nathan W. [Savannah River National Laborat↗

DOE OSTI2021

Use of computer vision for analysis of image datasets from high temperature plasma experiments

Great strides have been made in improving the quality of x-ray radiographs in high energy density plasma experiments, enabled in part by innovations in engineering and manufacturing of integrated circuits and materials. As a consequence, the radiographs of today are filled with a great deal of detail, but few of these features are extracted in a systematic way. Analysis techniques familiar to plasma physicists tend toward brittle 1D lineout or Fourier transform type analyses. The techniques applied to process our data have not kept pace with improvements in the quality of our data. Fortunately, the field of computer vision has a wealth of tools to offer, which have been widely used in industrial imaging and, more recently, adopted in biological imaging. We demonstrate the application of computer vision techniques to the analysis of x-ray radiographs from high energy density plasma experiments, as well as give a brief tutorial on the computer vision techniques themselves. These tools robustly extract 2D contours of shocks, boundaries of inhomogeneities, and secondary flows, thereby allowing for increased automation of analysis, as well as direct and quantitative comparisons with simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Combined full shape analysis of BOSS galaxies and eBOSS quasars using an iterative emulator

ABSTRACT Standard full-shape clustering analyses in Fourier space rely on a fixed power spectrum template, defined at the fiducial cosmology used to convert redshifts into distances, and compress the cosmological information into the Alcock–Paczynski parameters and the linear growth rate of structure. In this paper, we propose an analysis method that operates directly in the cosmology parameter space and varies the power spectrum template accordingly at each tested point. Predictions for the power spectrum multipoles from the TNS model are computed at different cosmologies in the framework of $\Lambda \rm {CDM}$. Applied to the final eBOSS QSO and LRG samples together with the low-z DR12 BOSS galaxy sample, our analysis results in a set of constraints on the cosmological parameters Ωcdm, H0, σ8, Ωb, and ns. To reduce the number of computed models, we construct an iterative process to sample the likelihood surface, where each iteration consists of a Gaussian process regression. This method is validated with mocks from N-body simulations. From the combined analysis of the (e)BOSS data, we obtain the following constraints: σ8 = 0.877 ± 0.049 and $\Omega _{\rm m}=0.304^{+0.016}_{-0.010}$ without any external prior. The eBOSS quasar sample alone shows a 3.1σ discrepancy compared to the Planck prediction.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2010

A Final Approach Trajectory Model for Current Operations

Predicting accurate trajectories with limited intent information is a challenge faced by air traffic management decision support tools in operation today. One such tool is the FAA's Terminal Proximity Alert system which is intended to assist controllers in maintaining safe separation of arrival aircraft during final approach. In an effort to improve the performance of such tools, two final approach trajectory models are proposed; one based on polynomial interpolation, the other on the Fourier transform. These models were tested against actual traffic data and used to study effects of the key final approach trajectory modeling parameters of wind, aircraft type, and weight class, on trajectory prediction accuracy. Using only the limited intent data available to today's ATM system, both the polynomial interpolation and Fourier transform models showed improved trajectory prediction accuracy over a baseline dead reckoning model. Analysis of actual arrival traffic showed that this improved trajectory prediction accuracy leads to improved inter-arrival separation prediction accuracy for longer look ahead times. The difference in mean inter-arrival separation prediction error between the Fourier transform and dead reckoning models was 0.2 nmi for a look ahead time of 120 sec, a 33 percent improvement, with a corresponding 32 percent improvement in standard deviation.

Gong, Chester↗

DOE OSTI2022

Image Analysis for Rapid Assessment and Quality-Based Sorting of Corn Stover

Imaging in the visible spectrum is a low-cost tool that can be readily deployed for in-field or over-belt monitoring of biomass quality for bio-refining operations. Rapid image analysis coupled with innovative preprocessing may reduce the impacts of feedstock variability through identification of contaminants or other material attributes to guide selective sorting and quality management. Image analysis was employed to evaluate the quality of corn stover in red-green-blue (RGB) chromatic space. This study used controlled, bench-scale imaging as a proof-of-concept for rapid quality assessment of corn stover based on variations in material attributes, including chemical and physical attributes, that relate to biological degradation and soil contamination. Additionally, logistic regression-based classification algorithms were used to develop a method for biomass screening as a function of biological degradation or soil contamination. This study demonstrated the use of image analysis to extract features from RGB color space to investigate variations in critical material attributes from chemical composition of corn stover. Fourier transform infrared (FT-IR) suggested a correlation between red band intensity and biological degradation, while detailed surface texture analysis was found to distinguish among variations in ash. These insights offer promise for development of a rapid screening tool that could be deployed by farmers for in-field assessment of biomass quality or biorefinery operators for in-line sorting and process optimization.

09 BIOMASS FUELS↗

NASA NTRS2013

Direct-to-Earth Communications with Mars Science Laboratory During Entry, Descent, and Landing

Mars Science Laboratory (MSL) undergoes extreme heating and acceleration during Entry, Descent, and Landing (EDL) on Mars. Unknown dynamics lead to large Doppler shifts, making communication challenging. During EDL, a special form of Multiple Frequency Shift Keying (MFSK) communication is used for Direct-To-Earth (DTE) communication. The X-band signal is received by the Deep Space Network (DSN) at the Canberra Deep Space Communication complex, then down-converted, digitized, and recorded by open-loop Radio Science Receivers (RSR), and decoded in real-time by the EDL Data Analysis (EDA) System. The EDA uses lock states with configurable Fast Fourier Transforms to acquire and track the signal. RSR configuration and channel allocation is shown. Testing prior to EDL is discussed including software simulations, test bed runs with MSL flight hardware, and the in-flight end-to-end test. EDA configuration parameters and signal dynamics during pre-entry, entry, and parachute deployment are analyzed. RSR and EDA performance during MSL EDL is evaluated, including performance using a single 70-meter DSN antenna and an array of two 34-meter DSN antennas as a back up to the 70-meter antenna.

Direct-to-Earth (DTE)↗

DOE OSTI2021

Spatiotemporal mapping of mesoscopic liquid dynamics

The study of liquid dynamics at mesoscopic scales is still strewn with difficulty due to limitations in theory and experiment. Historically, significant attention has been given to the analysis of space-time correlation functions and their frequency-Fourier transforms at a few discrete wave numbers. The massive computing power afforded by modern high performance computing clusters and the advent of a wide-angle neutron spin-echo spectrometer, however, have unlocked a more intuitive and fruitful approach to this problem. Using molecular dynamics simulations, here we demonstrate the benefits of spatiotemporally mapping intermediate scattering functions on a dense grid of correlation times and wave numbers. Four model systems are investigated: a Lennard-Jones liquid, a coarse-grained bead-spring polymer, a molten sodium chloride, and a poly(ethylene oxide) melt. We show that the spatiotemporal mapping approach is particularly useful for elucidating the mesoscopic dynamics in these liquids, where several underlying mechanisms, such as molecular relaxations, hydrodynamic modes, and nonhydrodynamic excitations, are potentially at play. Therefore, compared to the traditional method, direct visualization of density space-time correlation functions on two-dimensional color maps permits appraisals of complicated dynamical behavior at mesoscales in a global manner. For example, the scaling relations between space and time for different types of molecular motions can be straightforwardly identified on these plots, without any model-dependent analysis. Additionally, we show how theoretical ideas regarding collective mesoscopic dynamics, such as the classical hydrodynamic theory, the convolution approximation, and a recently proposed phenomenological model, can be discussed in terms of the global features of spatiotemporal maps of intermediate scattering functions. The new perspective offered by the spatiotemporal mapping method should prove useful for the study of liquid dynamics in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRSDate not supplied

Adventures in Astronomical Time Series Analysis

Welcome to a tour of the volatile, highly active Universe — in stark contrast to earlier serene ``clockwork’’ visions. Innovative data analysis techniques have illuminated explosive physical processes animating these systems. Examples include a Fourier transform suited to the irregular sampling characteristic of much astronomical data, but time domain techniques will be emphasized for these applications: gamma-ray activity in the Crab Nebula, gamma-ray bursts, active galactic nuclei, and gravitational waves. I hope this talk will change some of the ways you carry out statistical data analysis.

Jeffrey D Scargle↗

DOE OSTI2020

ftmsRanalysis: An R package for exploratory data analysis and interactive visualization of FT-MS data

The high-resolution and mass accuracy of Fourier transform mass spectrometry (FT-MS) has made it an increasingly popular technique for discerning the composition of soil, plant and aquatic samples containing complex mixtures of proteins, carbohydrates, lipids, lignins, hydrocarbons, phytochemicals and other compounds. Thus, there is a growing demand for informatics tools to analyze FT-MS data that will aid investigators seeking to understand the availability of carbon compounds to biotic and abiotic oxidation and to compare fundamental chemical properties of complex samples across groups. We present ftmsRanalysis, an R package which provides an extensive collection of data formatting and processing, filtering, visualization, and sample and group comparison functionalities. The package provides a suite of plotting methods and enables expedient, flexible and interactive visualization of complex datasets through functions which link to a powerful and interactive visualization user interface, Trelliscope. Example analysis using FT-MS data from a soil microbiology study demonstrates the core functionality of the package and highlights the capabilities for producing interactive visualizations.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Influence of Air and Ethanol Dehydration on Structure, Behavior, and Function of Type I Collagen Scaffolds

Ethanol dehydration is a common step in both scaffold manufacturing and tissue processing, yet the influence of ethanol on collagen is not well understood. This study examined the effects of dehydration, via ethanol treatment and air drying, on collagen structure, behavior, mechanics, and rehydration capacity. Multiple material characterization methods were used including Fourier Transform infrared spectroscopy (FTIR), Raman spectroscopy, scanning electron microscopy, thermogravimetric analysis, small/medium angle x‐ray scattering, volumetric swelling analysis, and tensile testing. Ethanol dehydration removed bulk water from scaffolds, making them stronger and stiffer, but also showed loss of molecular water. This molecular water appears to act as a collagen stabilizer, resulting in less thermally stable scaffolds. The loss of molecular water is also evident in the molecular d‐spacing. Secondary structure of scaffolds was also altered by ethanol, resulting in significantly enhanced rehydration capacity. Bulk water, both before and after rehydration, largely determined mechanical properties, which did not correlate with other structural measures such as FTIR. While rehydration largely returned collagen spacing to pre‐ethanol treated state, structural alterations seen in FTIR cannot be recovered. These results have implications for not only collagen scaffolds, but in many tissue engineering and processing applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2024

Influence of Aqueous Phase Acidity on Ln(III) Coordination by N , N , N ', N '-Tetraoctyldiglycolamide

Here, this study highlights the importance of combining distribution ratio measurements with multiple spectroscopic techniques to provide a more comprehensive understanding of organic phase Ln coordination chemistry. Solvent extraction investigations with N,N,N',N'-tetraoctyldiglycolamide (TODGA) in n-heptane reveal the sensitivity of Ln complexation to the HNO 3 concentration. Distribution ratio measurements in tandem with UV–Vis demonstrated that increasing the concentration of HNO3 above 0.5 M with a constant NO 3 – of 1 M increases the number of coordinating TODGA molecules, from a 1:2 to a 1:3 Ln:TODGA complex. At each concentration of HNO 3 considered herein (from 0.01 to 1 M), Eu lifetime analysis demonstrated no evidence of H 2 O coordination. Results from Fourier transform infrared investigations suggest the presence of inner-sphere NO 3 – under low concentrations of HNO 3 when the 1:2 Ln:TODGA complex is present. Increasing the HNO 3 concentration above 0.5 M increases the propensity for outer-sphere interactions by removing the coordinated NO 3 – and saturating the Ln coordination sphere with three TODGA molecules, resulting in the well-established cationic, trischelate homoleptic [Ln(TODGA) 3 ] 3+ complex. This work demonstrates the importance in considering the NO 3 – source for solvent extraction systems. In particular, for systems with an affinity for outer-sphere interactions with molar concentrations of HNO 3 , changing the NO 3 – source can change the inner-sphere coordination of the Ln complex, which, in turn, affects the separation efficacy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗