SEARCH · Engineering Papers

Results for “flaps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Design study of a feedback control system for the Multicyclic Flap System rotor (MFS)

The feasibility of automatically providing higher harmonic control to a deflectable control flap at the tip of a helicopter rotor blade through feedback of selected independent parameter was investigated. Control parameters were selected for input to the feedback system. A preliminary circuit was designed to condition the selected parameters, weigh limiting factors, and provide a proper output signal to the multi-cyclic control actuators. Results indicate that feedback control for the higher harmonic is feasible; however, design for a flight system requires an extension of the present analysis which was done for one flight condition - 120 kts, 11,500 lbs gross weight and level flight.

Weisbrich, R.↗

NASA NTRS1977

Aerodynamics of a finite aspect ratio jet flap at low flight speeds

A theoretical treatment of inviscid incompressible flow over a thin wing equipped with a part-span jet flap is given; the treatment is capable of describing low-speed flight regimes where nonlinear problems may be significant. The induced flow fields of the jet and the wing are characterized separately, and a fully coupled solution is reached through iteration. A lifting surface theory is employed for the wing aerodynamics, and the vorticity associated with the jet is also taken into account. Calculations are presented for the case of a rectangular wing. Comparisons with existing linear or nonlinear theories and experimental data suggest that the treatment is capable of accurate analyses in situations involving small angles of attack, jet deflection angles and jet momentum coefficients. In addition, the theory may be a better means of evaluating subsidiary aerodynamic variables, such as downwash aft of the wing, than existing treatments.

Addessio, F. L.↗

NASA NTRS1977

Numerical prediction of aeroacoustic jet-flap flows

Turbulent boundary layer flows departing an aerodynamic surface are experimentally verified to be strong sources of noise. Analysis of the source tensor of the Lighthill equation identifies important gradients of mean and fluctuating velocity components. Transition distributions of mean flow and select fluctuating velocity correlations, within the region immediately downstream of a sharp edged flap terminus are established by finite element solution of a parabolized form of the time-averaged steady flow Navier-Stokes equations closed with a turbulence kinetic energy model. Numerical solutions are presented which quantize the localized large mean flow accelerations and resultant peaks in the distribution of turbulence kinetic energy in the near wake region. Results are verified by comparison to experiment.

Baker, A. J.↗

NASA NTRS1977

Ground simulation and tunnel blockage for a swept, jet-flapped wing tested to very high lift coefficients

Ground effects experiments and large/small tunnel interference studies were carried out on a model with a 20 inch (50.8 cm) 25 degree swept wing. The wing is slatted, has a 60 degree knee-blown flap and can be fitted with unflapped tips. A tail rake of pitch-yaw probes can be fitted to the fuselage. Certain check tests were also made with a very similar straight-wing model.

Hackett, J. E.↗

NASA NTRS1976

Summary of low-speed aerodynamic characteristics of upper-surface-blown jet-flap configurations

The results of recent wind tunnel investigations to provide fundamental information on the upper surface blown (USB) jet flap concept demonstrated that the USB concept provides good high-lift performance. It is shown that the low speed performance is dependent upon the jet turning angle and turning efficiency and on the use of proper leading and trailing edge treatment to prevent premature flow separation. The best means of achieving good turning performance in any particular USB application must be determined from overall operational considerations in which high speed performance, structures and noise, as well as low speed performance, are evaluated. The large diving moments generated at high lift coefficients can be trimmed satisfactorily with a large, conventional horizontal tail; a high tail position is best from longitudinal stability considerations. Large rolling and yawing moments are introduced with the loss of an engine, but these moments can be trimmed satisfactorily through the use of asymmetrical boundary layer control and through the use of spoiler and rudder deflection as needed.

Phelps, A. E., III↗

NASA NTRS1976

Analytical modeling of under-the-wing externally blown flap powered-lift noise

The sound field produced by the interaction of a subsonic jet with a large-scale model of the under the wing externally blown flap in an approach attitude was analyzed. The analysis was performed to obtain a better understanding of the dominant noise sources and the mechanisms governing the peak sound pressure level frequencies of the broadband spectra. An analytical expression is derived which incorporates two available theories and experimental data; the expression predicts the sound field along a circular arc of approximately 120 deg measured from the upstream jet axis in the fly-over plane. The analysis compares favorably with test results obtained from two large-scale models, one using cold air from a conical nozzle and the other using hot gas from a TF-34 turbofan engine having a conical exhaust nozzle with a 12 lobe internal forced mixer. The frequency at which the peak sound pressure level occurs appears to be governed by a phenomenon which produces periodic formation and shedding of large-scale turbulence structures from the nozzle lip.

Mckinzie, D. J., Jr.↗

NASA NTRS1980

Aerodynamic performance of jet-flap wings

Computer program analyzes performance of jet-flap wings. Fast and easy-to-use prediction technique, it generates accurate solutions for wide range of wing geometries and trailing-edge jet momentum distributions. Analysis is based on optimized vortex-lattice approach and results in rapid convergence of both overall and distributed loadings.

Hough, G. R.↗

NASA NTRS1979

Investigation of surface fluctuating pressures on a 1/4 scale YC-14 upper surface blown flap model

Fluctuating pressures were measured at 30 positions on the surface of a 1/4-scale YC-14 wing and fuselage model during an outdoor static testing program. These data were obtained as part of a NASA program to study the fluctuating loads imposed on STOL aircraft configurations and to further the understanding of the scaling laws of unsteady surface pressure fields. Fluctuating pressure data were recorded at several discrete engine thrust settings for each of 16 configurations of the model. These data were reduced using the technique of random data analysis to obtain auto-and cross-spectral density functions and coherence functions for frequencies from 0 to 10 kHz, and cross-correlation functions for time delays from 0 to 10.24 ms. Results of this program provide the following items of particular interest: (1) Good collapse of normalized PSD functions on the USB flap was found using a technique applied by Lilley and Hodgson to data from a laboratory wall-jet apparatus. (2) Results indicate that the fluctuating pressure loading on surfaces washed by the jet exhaust flow was dominated by hydrodynamic pressure variations, loading on surface well outside the flow region dominated by acoustic pressure variations, and loading near the flow boundaries from a mixture of the two.

Pappa, R. S.↗

NASA NTRS1978

Transonic flow over the NACA 64A006 with an oscillating flap-calculations based on the Euler equations

Exploratory calculations of transonic flows over the airfoil with a quarter-chord oscillating flap were made using a program which obtains approximate solutions to the Euler equations with an explicit, shock-capturing, finite-difference scheme. The calculations, essentially inviscid and for the airfoil at zero angle-of-attack in a free-stream, are at Mach numbers and reduced frequencies which were tested in experiments by Tijdeman. The oscillatory lifts from analogus calculations by various investigators generally agree with one another better than they agree with Tijdeman's data. Inclusion in the calculations of an approximate modelling of boundary conditions expected at slotted wind tunnel walls tends to shift some of the results closer to the experimental values.

Magnus, R. J.↗

NASA NTRS1979

An experimental study of USB flap noise reduction through mean flow modification

The effect of mean flow modification on the noise production of upper surface blown flaps has been studied experimentally. Mean velocity profile at the nozzle exit was modified from the usual 'top-hat' shape to 'Gamma' and 'L'-shaped profiles. The 'L'-modification caused noise reduction around and above the peak frequency of the 'top-hat' spectrum when compared on an equal thrust per exit area basis. Modification to 'Gamma'-shaped profile resulted in a shift of the spectrum to lower frequencies and a lower overall noise reduction. These modifications alter the development of the large scale disturbances in the upper shear layer and trailing edge wake of the wall jet geometry.

Joshi, M. C.↗

NASA NTRS1969

Effect of wing-transition location and slotted and unslotted flaps on aerodynamic characteristics of a fighter model at high subsonic speeds

An investigation was conducted in the Langley 8 foot transonic pressure tunnel to determine the effects of wing transition location and of slotted and unslotted full span flaps on the longitudinal aerodynamic characteristics of a 1/15 scale model of a variable wing sweep tactical fighter model. Tests were at Mach numbers from 0.70 to 0.85 for a wing leading edge sweep of 26 deg.

Ayers, T. G.↗

NASA NTRS1981

Flap-lag-torsional dynamic modelling of rotor blades in hover and in forward flight, including the effect of cubic nonlinearities

The differential equations of motion, and boundary conditions, describing the flap-lead/lag-torsional motion of a flexible rotor blade with a precone angle and a variable pitch angle, which incorporates a pretwist, are derived via Hamilton's principle. The meaning of inextensionality is discussed. The equations are reduced to a set of three integro partial differential equations by elimination of the extension variable. The generalized aerodynamic forces are modelled using Greenberg's extension of Theodorsen's strip theory. The equations of motion are systematically expanded into polynomial nonlinearities with the objective of retaining all terms up to third degree. The blade is modeled as a long, slender, of isotropic Hookean materials. Offsets from the blade's elastic axis through its shear center and the axes for the mass, area and aerodynamic centers, radial nonuniformaties of the blade's stiffnesses and cross section properties are considered and the effect of warp of the cross section is included in the formulation.

Crespodasilva, M. R. M.↗

NASA NTRS1980

Wing flapping with minimum energy

A technique employed by Prandtl and Munk is adapted for the case of a wing in flapping motion to determine its lift distribution. The problem may be reduced to one of minimizing induced drag for a specified and periodically varying bending moment at the wing root. It is concluded that two wings in close tandem arrangement, moving in opposite phase, would eliminate the induced aerodynamic losses calculated

Jones, R. T.↗

NASA NTRS1981

Effect of leading-edge vortex flaps on aerodynamic performance of delta wings

The effect of leading-edge vortex flaps on the aerodynamic characteristics of highly swept-back wings is analytically investigated, using the free vortex sheet method. The method, based on a three-dimensional inviscid flow model, is an advanced panel type employing quadratic doublet distributions to represent the wing surface, rolled-up vortex sheet and wake and is capable of computing forces, moments and surface pressures.

Reddy, C. S.↗

NASA NTRS1981

Effects of vortex flaps on the low-speed aerodynamic characteristics of an arrow wing

Tests were conducted in the Langley 12-foot low-speed wind-tunnel to determine the longitudinal and lateral-directional aerodynamic effects of plain and tabbed vortex flaps on a flat-plate, highly swept arrow-wing model. Flow-visualization studies were made using a helium-bubble technique. Static forces and moments were measured over an angle-of-attack range from 0 deg to 50deg for sideslip angles of 0 deg and + or - 4 deg.

Yip, L. P.↗

NASA NTRS1981

Design and experimental results for a flapped natural-laminar-flow airfoil for general aviation applications

A flapped natural laminar flow airfoil for general aviation applications, the NLF(1)-0215F, has been designed and analyzed theoretically and verified experimentally in the Langley Low Turbulence Pressure Tunnel. The basic objective of combining the high maximum lift of the NASA low speed airfoils with the low cruise drag of the NACA 6 series airfoils has been achieved. The safety requirement that the maximum lift coefficient not be significantly affected with transition fixed near the leading edge has also been met. Comparisons of the theoretical and experimental results show generally good agreement.

Somers, D. M.↗

NASA NTRS1982

Coupled flap-lag-torsional dynamics of hingeless rotor blades in forward flight

The aeroelastic stability and response problem of the coupled flap-lag-torsional dynamics of an isolated hingeless rotor blade in forward flight is considered. Linear, quasi-steady aerodynamics below stall is included. The spatial dependence of the partial differential nonliner equations of motion is discretized using a multimodal Galerkin method. The nonlinear time dependent equilibrium position (steady state response) about which the equations are linearized is obtained by solving a sequence of linear periodic response problems (quasilinearization). Results illustrating blade behavior in forward flight for both soft-in-plane and stiff-in-plane designs are presented. Quasilinearization provides a clear indication of the cases when nonlinear terms due to moderate deflections are important. The results indicate that nonlinearities affect system stability much more than system response. This implies that for obtaining blade vibrations and loads, approximate analytical models based on linearized formulations could be employed, whereas for determining blade stability a more accurate nonlinear analysis would be required.

Friedmann, P. P.↗

NASA NTRS1985

Aerodynamic Analysis of Low-Speed Wing-Flap Systems

SUBAERF program developed for aerodynamic analysis and design of lowspeed wing-flap systems. SUBAERF based on linearized theory lifting-surface solution. Low speed aerodynamic analysis method used in SUBAERF provides estimates of wing performance which include effects of attainable leading edge thrust and vortex lift.

Carlson, H. W.↗