Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Data-Driven Modeling and Correction of Vehicle Dynamics

We develop a data-driven framework for learning and correcting nonautonomous vehicle dynamics. Physics-based vehicle models are often simplified for tractability and therefore exhibit inherent model-form uncertainty, motivating the need for data-driven correction. Moreover, nonautonomous dynamics are governed by time-dependent control inputs, which pose challenges in learning predictive models directly from temporal snapshot data. To address these, we reformulate the vehicle dynamics via a local parameterization of the time-dependent inputs, yielding a modified system composed ofa sequence of local parametric dynamical systems. Here, we approximate these parametric systems using two complementary approaches. First, we employ the dimension reduction and interpolation in parameter space (DRIPS) methodology to construct efficient linear surrogate models, equipped with lifted observable spaces and manifold-based operator interpolation. This enables data-efficient learning of vehicle models whose dynamics admit accurate linear representations in the lifted spaces. Second, for more strongly nonlinear systems, we employ flow map learning (FML), a deep neural network (DNN) approach that approximates the parametric evolution map without requiring special treatment of nonlinearities. We further extend FML with a transfer-learning-based model correction procedure, enabling the correction of misspecified prior models using only a sparse set of high-fidelity or experimental measurements, without assuming a prescribed form for the correction term. Through a suite of numerical experiments on unicycle, simplified bicycle, and slip-based bicycle models, we demonstrate that DRIPS offers robust and highly data-efficient learning of nonautonomous vehicle dynamics, while FML provides expressive nonlinear modeling and effective correction of model-form errors under severe data scarcity.

data-driven modeling↗

On the combustion of n-butyl acetate droplets

This paper presents an experimental and numerical study of the combustion of isolated n‑butyl acetate droplets in the standard atmosphere. Numerical simulations are reported using a model that incorporates unsteady gas and liquid transport, variable properties, and radiation. Three skeletal mechanisms of n‑butyl acetate, derived from a large detailed mechanism comprised of 819 species and 52,698 reactions, were used in the numerical simulations to evaluate the influence of the kinetic mechanism on burning. The reduced mechanisms comprised 212 species and 5413 reactions, 157 species and 3089 reactions, and 105 species and 1035 reactions. The numerical model did not include soot formation, though qualitatively mild sooting was noted only for droplets larger than 0.7 mm. The numerical predictions were in good agreement with experimental measurements of droplet and flame diameters. Flame extinction was numerically predicted which was attributed to a decrease of the characteristic diffusion time relative to the chemical time as droplet burned. Effects of initial droplet diameter on the evolution of maximum gas temperature (Tmax) and peak mole fractions of CO2 and CO are also examined numerically.

09 BIOMASS FUELS↗

Exploring the Dynamics of Transverse Inter-planar Coupling in the Superconducting Section of the PIP-II LINAC

This study investigates the crucial role that an accurate understanding of inter-planar coupling in the transverse plane plays in regulating charged particle dynamics in a high intensity linear accelerator and minimizing foil/septum impacts during injection from the linac to a ring. We performed an in-depth analysis for the emergence and evolution of trans verse inter-planar coupling through multiple active lattice elements, taking into account space charge and field nonlinearities in the superconducting section of the PIP-II linac. The article compares various analytical, numerical, and experimental techniques for measuring transverse coupling using beam and lattice matrices and provides insight into effective strategies for its mitigation prior to ring injection.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

OLCF’s Advanced Computing Ecosystem (ACE): FY25 Update for Ongoing Efforts

The advent of widespread use of artificial intelligence (AI) and machine learning (ML) models in science, coupled with fast data production rates of scientific instruments strain the traditional batch-oriented high-performance computing (HPC) environment. As scientific exploration continues to require more data and faster processing and analysis, new emerging technologies and capabilities to enable cross-facility and time-sensitive workflows are required for seamless integration of HPC and experimental facilities. The Advanced Computing Ecosystem (ACE) is a strategic initiative within the Oak Ridge Leadership Computing Facility (OLCF) established in 2024 to support the development of cutting-edge technologies to advance computational research and infrastructure at OLCF and across the Department of Energy (DOE). Several DOE initiatives are spearheading the evolution of the scientific landscape by blurring facility boundaries and connecting the user facilities to advance scientific capabilities and ensure energy dominance. The DOE Integrated Research Infrastructure (IRI) program is one example that is laying a foundation to support complex cross-facility workflows. The IRI program aims to integrate diverse computational resources, data infrastructures, and scientific instruments to facilitate collaboration and accelerate scientific discovery. The Interconnected Science Ecosystem (INTERSECT) initiative at Oak Ridge National Laboratory (ORNL) is another example that aims to revolutionize scientific research through AI-driven, interconnected autonomous laboratories and research facilities. Finally, the American Science Cloud (AmSC), recently announced in the “One Big Beautiful Bill”, aims to leverage prior infrastructure efforts of the IRI and automation and AI efforts of INTERSECT (and others) to build a federated, AI-augmented AmSC platform to unify the DOE’s computing, experimental, and data resources to catalyze scientific innovation.

97 MATHEMATICS AND COMPUTING↗

Analysis of the Shattered Pellet Injection Fragment Plumes Generated by Machine Specific Shatter Tube Designs

Shattered pellet injector systems have been installed on DIII-D, JET, and KSTAR and used to experimentally determine the effectiveness of the shattered pellet injection (SPI) process in mitigating the deleterious effects of a tokamak plasma disruption. Pellets are fired, and before entering the plasma, strike a bent tube known as a shatter tube causing the pellet to shatter. The process of pellet fragmentation is a chaotic process that can be described in terms of fragment size distribution through a statistical model that incorporates the effects of the pellet material and impact characteristics. In addition to the fragment size distribution, the shatter plume has other characteristics of interest, such as a fragment velocity distribution and temporal mass evolution. The fragment velocity distribution is important because it is needed to accurately model the spread and location of the ablation and the deposition of impurities in the plasma over time. The temporal mass evolution is necessary to determine the time-resolved delivery of mass to the plasma.Due to installation constraints, the shatter tube currently installed on JET has a unique geometry with a modest S-bend followed by a 20-deg bend at the end of the tube. The DIII-D and KSTAR shatter tube design is a simple tube bent through an angle of 20 deg followed by a straight section. The resulting shatter sprays from the JET shatter tube and a 20-deg miter bend shatter tube were experimentally characterized for various pellet materials and speeds. Laboratory testing of these shatter tubes allows for the use of fast cameras to capture the fragment spray traveling through a large vacuum chamber. These high-speed videos of the shatter plumes allow the fragment size distribution, temporal mass evolution, and velocity distribution of the fragments within the plume to be determined. Overall, this paper presents a comparison of the unique geometry of the JET shatter tube to the miter bend geometries used for shattering and some insight into the variables that may be adjusted to produce the optimal shatter spray. The impact of entrained propellant gas on the resulting shatter spray was examined during testing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Longitudinal proteomics analysis in the immediate microenvironment of islet allografts during progression of rejection

The applicability and benefits of pancreatic islet transplantation are limited due to various issues including the need to avoid immune-mediated rejection. In the present study, we used our experimental platform of allogeneic islet transplant in the anterior chamber of the eye (ACE-platform) to longitudinally monitor the progress of rejection in mice and obtain aqueous humor samples representative of the microenvironment of the graft for accurately-timed proteomic analyses. LC-MS/MS-based proteomics performed on such mass-limited samples (~5 μL) identified a total of 1296 proteins. Various analyses revealed distinct protein patterns associated with the mounting of the inflammatory and immune responses and their evolution with the progression of the rejection. Pathway analyses indicated predominant changes in cytotoxic functions, cell movement, and innate and adaptive immune responses. Furthermore, network prediction analyses revealed transition from humoral to cellular immune response and exacerbation of pro-inflammatory signaling. One of the proteins identified by this localized proteomics as a candidate biomarker of islet rejection, Cystatin 3, was further validated by ELISA in the aqueous humor. This study provides (1) experimental evidence demonstrating the feasibility of longitudinal localized proteomics using small aqueous humor samples and (2) proof-of-concept for the discovery of biomarkers of impending immune attack from the immediate local microenvironment of ACE-transplanted islets.

59 BASIC BIOLOGICAL SCIENCES↗

Nearly hyperuniform, nonhyperuniform, and antihyperuniform density fluctuations in two-dimensional transition metal dichalcogenides with defects

Hyperuniform many-body systems in d-dimensional Euclidean space R d are characterized by completely suppressed (normalized) infinite-wavelength density fluctuations, and appear to be endowed with novel exotic physical properties. Recently, hyperuniform systems of disordered varieties have been observed in the context of various atomic-scale two-dimensional (2D) materials. Here, we analyze the effects of localized defects on the density fluctuations across length scales and on the hyperuniformity property of experimental samples of two-dimensional transition metal dichalcogenides. In particular, we extract atomic coordinates from time series annular dark field-scanning transmission electron microscopy (ADF-STEM) imaging data of 2D tungsten chalcogenides with the 2H structure (Te-doped 2H-WSe 2 ) showing continuous development and evolution of electron-beam induced defects, and construct the corresponding chemical-bonding informed coordination networks between the atoms. We then compute a variety of pair statistics and bond-orientational statistics to characterize the samples. At low defect concentrations, the corresponding materials are nearly hyperuniform, characterized by significantly suppressed scattering at the zero wave-number limit (omitting forward/ballistic scattering). As more defects are introduced, the (approximate) hyperuniformity of the materials is gradually destroyed, and the system becomes non-hyperuniform even when the material still contains a significant amount of crystalline regions. At high defect concentrations, the structures become antihyperuniform with diverging (normalized) large-scale density fluctuations, mimicking those typically observed at the thermal critical points associated with phase transitions. Overall, the defected materials possess varying degrees of orientation order, and there is apparently no intermediate hexatic phase emerging. To understand the observed nearly hyperuniform density fluctuations in the slightly defected materials, we construct a minimalist structural model and demonstrate that the experimental samples can be essentially viewed as perturbed honeycomb crystals with small correlated displacements and double chalcogen vacancies. Moreover, the small correlated displacements alone can significantly degrade hyperuniformity of the perfect honeycomb structure. Therefore, even a small amount of vacancies, when coupled with correlated displacements, can completely destroy hyperuniformity of the system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cu[Ni(2,3-pyrazinedithiolate) 2 ] Metal–Organic Framework for Electrocatalytic Hydrogen Evolution

The application of metal–organic frameworks (MOFs) as electrocatalysts for small molecule activation has been an emerging topic of research. Previous studies have suggested that two-dimensional (2D) dithiolene-based MOFs are among the most active for the hydrogen evolution reaction (HER). Here, a three-dimensional (3D) dithiolene-based MOF, Cu[Ni(2,3-pyrazinedithiolate) 2 ] (1), is evaluated as an electrocatalyst for the HER. In pH 1.3 aqueous electrolyte solution, 1 exhibits a catalytic onset at –0.43 V vs the reversible hydrogen electrode (RHE), an overpotential (η 10 mA/cm 2 ) of 0.53 V to reach a current density of 10 mA/cm 2 , and a Tafel slope of 69.0 mV/dec. Interestingly, under controlled potential electrolysis, 1 undergoes an activation process that results in a more active catalyst with a 200 mV reduction in the catalytic onset and η 10 mA/cm 2 . It is proposed that the activation process is a result of the cleavage of Cu–N bonds in the presence of protons and electrons. Furthermore, this hypothesis is supported by various experimental studies and density functional theory calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Analysis and Experimental Validation of Flying-Capacitor Multilevel Converters Under Short-Circuit Fault Conditions

Addressing the increasing demand for high- efficiency and high-power-density converters, the flying-capacitor multilevel converter has shown itself as a promising topology. A key advantage of this topology is the reduced voltage rating of the switches, though also makes it vulnerable to device failure during short-circuit conditions. Despite large interest in fault-tolerant operation of these converters, alongside detailed descriptions of flying capacitor balancing, little research has focused on the converter short-circuit fault analysis, which may cause a switch failure if not properly designed for. Therefore, this work presents a comprehensive model describing the large- signal short-circuit switching behavior of a general N -level flying- capacitor multilevel converter. Highly simplified models used to predict the evolution of the switch current and voltage stress during the fault are proposed, targeted at practicing engineers for conservative design guidelines. These models are used to determine the critical time for remedial action of the converter before reaching some predefined maximum conditions. A 2-to-10- level fully-configurable flying-capacitor multilevel converter and a fault circuit hardware prototype are used to experimentally perform different short-circuit tests that show a good match to the measured behavior.

24 POWER TRANSMISSION AND DISTRIBUTION↗

From electricity to fuels: Descriptors for C 1 selectivity in electrochemical CO 2 reduction

Electrochemical reduction of carbon dioxide (CO 2 RR) over transition metals follows a complex reaction network. Here, we combine observations from experimental literature with a theoretical analysis of energetics to rationalize that not all intermediates in the reduction of CO 2 are formed through direct protonation steps. We derive a selectivity map for two-electron products (carbon monoxide (CO) and formate) on pure metal surfaces using only the CO and OH binding energies as descriptors. For the pure metals that are selective towards CO formation, the variation of the CO binding energy is sufficient to further subdivide the map into domains that predominantly form H 2 , CO, and more reduced products. Our analysis rationalizes experimentally observed product distributions in CO 2 RR across pure metal systems. Overall, we highlight the need for additional material screening descriptors for CO 2 R and the importance of considering competition from the elementary steps of the hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light mesons with one dynamical gluon on the light front

We obtain the light meson mass spectroscopy from the light-front quantum chromodynamics (QCD) Hamiltonian, determined for their constituent quark-antiquark and quark-antiquark-gluon Fock components, together with a three-dimensional confinement. The eigenvectors of the light-front effective Hamiltonian provide a good quality description of the pion electromagnetic form factor, decay constant, and the valence quark distribution functions following QCD scale evolution. We also show that the pion's gluon densities can be probed through the pion-nucleus induced $J/ψ$ production data. Our pion parton distribution functions provide excellent agreement with $J/ψ$ production data from widely different experimental conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface-Controlled TiO 2 Nanocrystals with Catalytically Active Single-Site Co Incorporation for the Oxygen Evolution Reaction

The design of advanced electrocatalysts is often hindered by uncertainties in identifying and controlling the active surfaces and catalytic centers within heterogeneous materials. Here we present the synthesis of single-site Co catalysts, substitutionally doped into surface-controlled TiO 2 anatase nanocrystals, aimed at enhancing the oxygen evolution reaction (OER). Grand canonical quantum mechanics calculations reveal that the kinetics of the OER, following an adsorbate evolution mechanism, is markedly influenced by the coordination environment of Co. The simulations suggest significantly higher turnover frequencies when Co is doped into the (001) surface of TiO 2 compared to the (101) surface. Consistent with the computational findings, experimental results show that Co-doped TiO 2 (Co-TiO 2 ) nanoplates with selectively exposed {001} surfaces exhibit enhanced current densities and turnover frequencies compared to Co-TiO 2 nanobipyramids with {101} surfaces. This study highlights the synergy between theoretical calculations and precision synthesis in the development of more effective catalysts.

25 ENERGY STORAGE↗

Optical and electrochemical effects of H 2 and O 2 bubbles at upward-facing Si photoelectrodes

The effects of the size, contact-angle, and coverage of gas bubbles on solar fuels devices were characterized at cm-scale, upward-facing planar and microwire-array Si photoelectrodes in stagnant electrolytes. Experimental measurements were supported by ray-tracing simulations of surface attached gas bubble films. A dilute, redox-active tracer allowed for the quantification of the mass-transport effects of bubble coverage during photoanodic O 2 (g) evolution at upward-facing photoanodes in 1.0 M KOH(aq.). Measurements of the gas coverage at upward-facing p-Si photocathodes in 0.50 M H 2 SO 4 (aq.) allowed for the nucleation rate and contact angle of H 2 (g) bubbles to be evaluated for systems having various surface free energies. Under simulated solar illumination, the rapid departure of small O 2 (g) bubbles produced stable photocurrents at upward-facing oxygen-evolving Si photoanodes and yielded increased mass-transport velocities relative to a stagnant electrolyte, indicating that bubbles can provide a net benefit to the photoelectrochemical performance of an upward-facing photoanode in solar fuels devices.

14 SOLAR ENERGY↗

Comparison of the Arrhenius parameters between conventional hydrothermal and microwave-assisted synthesis methods for tin oxide nanoparticles

Microwave (MW) irradiation has emerged as a powerful tool for accelerating materials synthesis, yet the origins of its specific influence on reaction kinetics remain elusive. While multiple studies have attributed the observed enhancements in reaction rates under MW heating to reduced activation energies, other accounts have suggested modifications to the Arrhenius pre-exponential factor as the predominant cause. Distinguishing between these parameters in modern applications of MW processing in nanomaterials requires experimental approaches capable of resolving the dynamic and nuanced structural kinetics that govern MW-assisted chemistry. Here, we combine in-situ synchrotron X-ray total scattering with pair distribution function (PDF) analysis to track the structural evolution of SnO 2 nanoparticles synthesized via MW-assisted and conventional hydrothermal conditions. Avrami modeling and Arrhenius analysis suggest that although MW irradiation yields a higher apparent activation energy, the enhanced crystallization is better explained by a pre-exponential factor several orders of magnitude larger than that of conventional heating. These findings suggest that the MW field induces a higher frequency of successful molecular rearrangements rather than lowering the intrinsic activation barrier. The results contribute further insights clarifying the role of the applied MW field for materials design where MW-specific effects can be deliberately harnessed. Furthermore, this work presents a framework promoting the utility of in-situ PDF characterization coupled with kinetic analysis for developing more sophisticated descriptions of nanoscale transformations for MW-driven reaction kinetics.

36 MATERIALS SCIENCE↗

A method for examining ensemble averaging forms during the transition to turbulence in HED systems for application to RANS models

This paper discusses a strategy to initialize a two-dimensional (2D) Reynolds-averaged Navier–Stokes model [LANL's Besnard–Harlow–Rauenzahn (BHR) model] in order to describe an unsteady transitional Richtmyer–Meshkov (RM)-induced flow observed in on-going high-energy-density ensemble experiments performed on the OMEGA-EP facility. The experiments consist of a nominal single-mode perturbation (initial amplitude a 0 ≈ 10 and wavelength $λ$ = 100μm) with target-to-target variations in the surface roughness subjected to the RM instability with delayed Rayleigh–Taylor in a heavy-to-light configuration. Our strategy leverages high-resolution three-dimensional (3D) implicit large eddy simulations (ILES) simulations to initialize BHR-relevant parameters and subsequently validate the 2D BHR results against the 3D ILES simulations. A suite of five 3D ILES simulations corresponding to five experimental target profiles is undertaken to generate an ensemble dataset. Using ensemble averages from the 3D simulations to initialize the turbulent kinetic energy in the BHR model ( K 0 ) demonstrates the ability of the model to predict the time evolution of the interface as well as the density-specific-volume covariance, b . To quantify the sensitivity of the BHR results to the choice of K 0 and the initial turbulent length scale, S 0 , we execute a parameter sweep spanning four orders of magnitude for both S 0 and K 0 , generating a parameter space consisting of 26 simulations. The Pearson's correlation coefficient is used as a measure of discrepancy between the 2D BHR and 3D ILES simulations and reveals that the ranges 8≲S 0 ≲20 μm and 10 9 ≲K 0 ≲10 10 cm 2 /s 2 produce predictions that agree best with the 3D ILES results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Defect-induced phonon-resonant scattering and its influence on thermal transport of irradiated thorium-dioxide

Thermal transport in proton irradiated thorium-dioxide (ThO 2 ) is investigated. Using a combination of experiments and first-principles computational framework, the role of lattice defects on thermal conductivity is analyzed. A resonant-phonon scattering mechanism beyond the traditionally considered Rayleigh scattering is found to significantly influence low-temperature thermal transport in the presence of irradiation-induced point defects. The existence of localized phonon modes associated with irradiation-induced defects is suggested by the inability of the first-principles based thermal conductivity model—which considers only three-phonon interactions and phonon-defects scattering using the Tamura formalism—to predict the experimental results, unless a resonant scattering mechanism is included. The emergence of additional peaks in the Raman spectra in the proximity of phonon-resonant frequency provides further evidence for the existence of localized modes. Coupled with a microstructure evolution model, this analysis enables more accurate analysis for contrasting the contributions of different phonon scattering mechanisms across all irradiation doses and temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Deterministic Quantum Trajectory via Imaginary Time Evolution

Stochastic quantum trajectories, such as pure state evolutions under unitary dynamics and random measurements, offer a crucial ensemble description of many-body open system dynamics. Recent studies have highlighted that individual quantum trajectories also encode essential physical information. Prominent examples include measurement-induced phase transitions, where a pure quantum state corresponding to fixed measurement outcomes (trajectories) exhibits distinct entanglement phases, depending on the measurement rate. However, direct observation of this effect is hindered by an exponential postselection barrier, whereby the probability of realizing a specific trajectory is exponentially small. We propose a deterministic method to efficiently prepare quantum trajectories in polynomial time using imaginary time evolution and, thus, overcome this fundamental challenge. Here, we demonstrate that our method applies to a certain class of quantum states, and argue that universal approaches do not exist for any quantum trajectories. Our result paves the way for experimentally exploring the physics of individual quantum trajectories at scale and enables direct observation of certain postselection-dependent phenomena.

Mittal, Shivan [Los Alamos National Laboratory (LA↗

Effects of dimensionality on the electronic structure of Ruddlesden-Popper chromates Sr n+1 ⁢Cr n ⁢O 3⁢n+1

Transition-metal oxides host a wide variety of electronic phenomena that can be significantly influenced by the effective dimensionality of the system under consideration. These include charge, spin, and orbital orderings, as well as unconventional superconductivity. In this context, the Ruddlesden-Popper chromates Sr n+1 Cr n O 3n+1 emerge as a particularly intriguing series of materials. Formally, the chromium atom displays a rather special 4+ oxidation state throughout the entire series. However, the effective dimensionality changes from quasi-2D to 3D as n increases from 1 to ∞. As a result, the insulating antiferromagnetic behavior observed for n = 1, 2, 3 transforms into itinerant antiferromagnetism with reduced transition temperature for the n = ∞ end member of the series, i.e., the perovskite SrCrO 3 . Further, distinct orbital orderings with exotic singlet states have been predicted for these systems. However, the lack of single-crystal bulk or thin-film samples has made experimental progress difficult. Here we demonstrate the synthesis of thin films of the perovskite SrCrO 3 and the associated layered chromates via oxide molecular beam epitaxy for n = 1 to n = 5. Our electrical transport measurements reveal a gradual evolution from a strongly insulating state in Sr 2 CrO 4 to a metallic state in the end member SrCrO 3 . X-ray absorption spectroscopy measurements demonstrate a varying hybridization strength of the Cr 4+ valence electrons across the series, helping to explain the trend in conduction. Finally, density functional theory calculations further confirm the observed transport trend and identify additional distortions present in the system.

36 MATERIALS SCIENCE↗