Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “emergency generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Beyond the four core effects: revisiting thermoelectrics with a high-entropy design

Low-exergy waste heat, which constitutes the majority of industrial-scale thermal losses, remains largely unrecoverable with conventional technologies. Thermoelectrics offer a solid-state solution for converting this hard-to-access energy into electricity, making them attractive for decentralized power generation and sensor applications. High-entropy materials (HEMs) have gained traction as a strategy for better-performing thermoelectrics, but the mechanisms driving their benefits require further exploration. This article highlights key insights for heat and electronic transport in HEMs. For heat transport, we argue that reduced, and often ultralow, lattice thermal conductivity in HEMs—with respect to ordered counterparts—can be taken for granted, emerging naturally as a fifth core effect of high-entropy systems. While band convergence is often considered beneficial for electronic transport, its impact depends strongly on the electronic structure. We summarize the scenarios where it can be detrimental to thermoelectric performance. These insights motivate strategies that align seamlessly with advancements in artificial intelligence and data-driven approaches, helping accelerate the discovery of next-generation thermoelectric materials.

Oses, Corey [Johns Hopkins Univ., Baltimore, MD (U↗
DOE OSTI2025

Compressing Hamiltonians with ab initio downfolding for simulating strongly-correlated materials on quantum computers

The accurate first-principles description of strongly correlated materials is an important and challenging problem in condensed matter physics. Ab initio downfolding has emerged as a way of deriving compressed many-body Hamiltonians that maintain the essential physics of strongly correlated materials. The solution of these material-specific models is still exponentially difficult to generate on classical computers, but quantum algorithms allow for a significant speed-up in obtaining the ground states of these compressed Hamiltonians. Here, we demonstrate that using quantum algorithms to obtain the properties of downfolded Hamiltonians can indeed yield high-fidelity solutions. By combining ab initio downfolding and variational quantum eigensolvers, we correctly predict the antiferromagnetic state of one-dimensional cuprate Ca 2 Cu O 3 , the excitonic ground state of monolayer W Te 2 , and the charge-ordered state of correlated metal Sr VO 3 . Numerical simulations using a classical tensor network implementation of variational quantum eigensolvers allow us to simulate large models with up to 54 qubits and encompassing up to four bands in the correlated subspace, which is indicative of the complexity that our framework can address. Through these methods we demonstrate the potential of classical preoptimization and downfolding techniques for enabling efficient materials simulation using quantum algorithms.

Alvertis, Antonios M. [NASA, Ames; LBNL, Berkeley]↗
DOE OSTI2021

Lorentz symmetry in ghost-free massive gravity

The role of Lorentz symmetry in ghost-free massive gravity is studied, emphasizing features emerging in approximately Minkowski spacetime. The static extrema and saddle points of the potential are determined and their Lorentz properties identified. Solutions preserving Lorentz invariance and ones breaking four of the six Lorentz generators are constructed. Locally, globally, and absolutely stable Lorentz-invariant extrema are found to exist for certain parameter ranges of the potential. Gravitational waves in the linearized theory are investigated. Deviations of the fiducial metric from the Minkowski metric are shown to lead to pentarefringence of the five wave polarizations, which can include superluminal modes and subluminal modes with negative energies in certain observer frames. The Newton limit of ghost-free massive gravity is explored. The propagator is constructed and used to obtain the gravitational potential energy between two point masses. Here, the result extends the Fierz-Pauli limit to include corrections generically breaking both rotation and boost invariance.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Cumulative fidelity of large-momentum-transfer clock atom interferometers in the presence of laser noise

Clock atom interferometry is an emerging technique in precision measurements that is particularly well suited for sensitivity enhancement through large momentum transfer (LMT). While current systems have demonstrated momentum separations of several hundreds of photon momenta, next-generation quantum sensors are targeting an LMT enhancement factor beyond 10 4 . However, the viability of LMT clock interferometers has recently come into question due to the potential impact of laser frequency noise. Here, in this work, we resolve this concern by analyzing the cumulative fidelity of sequential state inversions in an LMT atom interferometer. We show that the population error from 𝑛 pulses applied from alternating directions scales linearly with 𝑛. This is a significant advantage over the 𝑛 2 scaling that occurs when probing a two-level system 𝑛 times from the same direction. We further show that contributions to the interferometer signal from parasitic paths generated by imperfect pulses are negligible, for any loss mechanism. These results establish that laser frequency noise is not a practical limitation for the development of high-fidelity LMT clock atom interferometers.

Mach-Zehnder atom interferometry↗
DOE OSTI2022

Necklace-structured high-harmonic generation for low-divergence, soft x-ray harmonic combs with tunable line spacing

The extreme nonlinear optical process of high-harmonic generation (HHG) makes it possible to map the properties of a laser beam onto a radiating electron wave function and, in turn, onto the emitted x-ray light. Bright HHG beams typically emerge from a longitudinal phased distribution of atomic-scale quantum antennae. Here, we form a transverse necklace-shaped phased array of linearly polarized HHG emitters, where orbital angular momentum conservation allows us to tune the line spacing and divergence properties of extreme ultraviolet and soft x-ray high-harmonic combs. The on-axis HHG emission has extremely low divergence, well below that obtained when using Gaussian driving beams, which further decreases with harmonic order. This work provides a new degree of freedom for the design of harmonic combs—particularly in the soft x-ray regime, where very limited options are available. Such harmonic beams can enable more sensitive probes of the fastest correlated charge and spin dynamics in molecules, nanoparticles, and materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Towards reverse mode automatic differentiation of Kokkos-based codes

Derivative computation is a key component of optimization, sensitivity analysis, uncertainty quantification, and the solving of nonlinear problems. Automatic differentiation (AD) is a powerful technique for evaluating such derivatives, and in recent years, has been integrated into programming environments such as Jax, PyTorch, and TensorFlow to support derivative computations needed for training of machine learning models, facilitating wide-spread use of these technologies. The C++ language has become the de facto standard for scientific computing due to numerous factors, yet language complexity has made the wide-spread adoption of AD technologies for C++ difficult, hampering the incorporation of powerful differentiable programming approaches into C++ scientific simulations. This is exacerbated by the increasing emergence of architectures, such as GPUs, with limited memory capabilities and requiring massive thread-level concurrency. C++ AD tools must effectively use these environments to bring novel scientific simulations to next-generation DOE experimental and observational facilities. In this project, we investigated source transformation-based automatic differentiation using LLVM compiler infrastructure to automatically generate portable and efficient gradient computations of Kokkos-based code. We have demonstrated that our proposed strategy is feasible by investigating the usage of a prototype LLVM-based source transformation tool to generate gradients of simple functions made of sequences of simple Kokkos parallel regions. Speedups of up to 500x compared to Sacado were observed on NVIDIA V100 GPU.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

INL Poster - Juan Barrera Salazar

Generation IV nuclear reactors introduce several advantages and benefits in terms of safety and efficiency when compared with their predecessors from previous generation. This is due, among many things, to the use of innovative forms of fuel and coolant, different from the conventional ones used in the last decades. Given that these upcoming designs utilize emerging technologies, the related instrumentation is also in the process of being developed; therefore, it is necessary to establish the sensitivity requirements and the effects of uncertainty on different properties of the components and elements of the reactor designs. This report presents the results of simulations that quantify the impacts of the uncertainties of four thermophysical properties of the refrigerant salt (LiF-BeF2) for the Kairos Power benchmark model (g-FHR) for steady state making use of the Sobol’ method through polynomial chaos surrogate modeling. The properties of the salt to which uncertainty was evaluated were density, dynamic viscosity, thermal conductivity and heat capacity. This study was carried out using the Griffin/Pronghorn multiphysics model under the computational resources of the Idaho National Laboratory (INL) High Performance Computing (HPC). The results indicate a weak dependence of the uncertainty of thermal conductivity on the quantities of core pressure drop and core outlet temperature.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2023

Soliton formation and topology manipulation of coupled spins via ultrafast re-magnetization

The major goal of the project was to explore the properties of magnetic order driven far out of equilibrium by optical excitations. These include fundamental questions related to the interplay of magnetic, structural and electronic degrees of freedom in materials that are optically excited. These problems break down in short term quenching of the magnetization as a results of the energy of the optical pulse studying how the energy of the optical pulse and the angular momentum of the magnetization flow between the different degrees of freedom. This is followed by the longer time re-emergence of the magnetism as the system cools. Within this goal we explored the formation of solitons, both with and without non-trivial topology, via rapid re-magnetization processes after optical-driven ultrafast demagnetization. Guided by theory, we predict that turbulence and modulational instabilities will drive the formation of solitons, including dispersive shock waves, magnon droplets, and skyrmions. In the case of topological defect formation, i.e. skyrmion generation, related processes have long been predicted based on general principles of symmetry-breaking phase transitions; the density of topological defects in a long-range-ordered phase can be controlled by varying the quench rate through the second-order phase transition, i.e. the Kibble-Zurek (KZ) mechanism. We, more broadly, had the goal to study a range of other emergent magnetic behaviors after optical excitation. While great attention has been given to ultrafast demagnetization, less is known of the subsequent spin dynamics and coupling to the lattice. What is increasingly appreciated is that ultrafast demagnetization leads to spin currents that can carry angular momentum from the rapidly demagnetized sample. These spin currents appear in many ways but fundamentally controls demagnetization, drives interactions between regions of the material, and control the spin resulting structure. They can be probed many ways including THz emission which, in turn, gives insight into the demagnetization processes. Simultaneously if there is magneto-elastic coupling ultrafast demagnetization can drive structural excitations that are not expected from thermal energy added to the lattice. We explored a range of complex phenomena that arise from photo-excitation of magnetic systems with the coupling of electronic, magnetic and structural degrees of freedom. We have made a number of fundamental discoveries that are reflected in our publications list with additional work still being prepared for publication. Highlights of this work include (i) ultra-efficient, nonlinear THz surface acoustics (ii) spin-current-mediated rapid magnon localization and coalescence, (iii) spin-wave soliton formation in ferromagnetic FePt nanoparticles, (iv) dynamic phonon coupling in elemental antiferromagnetic Cr, (v) THz emission from Co/Pt bilayers and FeRh/Pt bilayers, (vi) theoretical investigation of spin hydrodynamics, solitons and shock waves, and (vii) ultrafast perturbation of magnetic domains by optical pumping.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Application of a Genetic Algorithm to the Optimization of a Mesoscale Model for Emergency Response

Besides solving the equations of momentum, heat, and moisture transport on the model grid, mesoscale weather models must account for subgrid-scale processes that affect the resolved model variables. These are simulated with model parameterizations, which often rely on values preset by the user. Such “free” model parameters, along with others set to initialize the model, are often poorly constrained, requiring that a user select each from a range of plausible values. Finding the values to optimize any forecasting tool can be accomplished with a search algorithm, and one such process—the genetic algorithm (GA)—has become especially popular. As applied to modeling, GAs represent a Darwinian process: an ensemble of simulations is run with a different set of parameter values for each member, and the members subsequently judged to be most accurate are selected as “parents” who pass their parameters onto a new generation. At the U.S. Department of Energy’s Savannah River Site in South Carolina, we are applying a GA to the Regional Atmospheric Modeling System (RAMS) mesoscale weather model, which supplies input to a model to simulate the dispersion of an airborne contaminant as part of the site’s emergency response preparations. An ensemble of forecasts is run each day, weather data are used to “score” the individual members of the ensemble, and the parameters from the best members are used for the next day’s forecasts. As meteorological conditions change, the parameters change as well, maintaining a model configuration that is best adapted to atmospheric conditions. Significance Statement We wanted to develop a forecasting system by which a weather model is run over the Savannah River Site each day and repeatedly adjusted according to how well it performed the previous day. To run the model, a series of values (parameters) must be set to control how the model will calculate winds, temperatures, and other desired variables. Each day the model was run several times using different combinations of these parameters and later compared with observed meteorological conditions. Parameters that produced the most accurate forecasts were preferentially reused to create the forecasts for the next day. The process was tested for the summer of 2020 and exhibited lower errors than forecasts produced by the model using default values of the parameters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Pool boiling heat transfer evaluation of next-generation dielectric fluid: Opteon™ 2P50

The growing use of artificial intelligence has led to heavy thermal loads and high heat dissipation rates in data centers. Conventional air-cooled technologies are not able to fulfill these requirements. To overcome these challenges, two-phase immersion cooling (2PIC) has emerged as one of the leading technologies for high power-density chips. 2PIC increases the heat dissipation rate and efficiency of the system while reducing the footprint of the cooling equipment. A fluid with adequate dielectric properties, a suitable normal boiling temperature to maintain chip temperatures, and good material compatibility, is desired for 2PIC system. In this study, the pool boiling heat transfer of a new developmental dielectric fluid, Opteon™ 2P50, was experimentally investigated. The heat transfer coefficients at various heat fluxes (20–150 kW/m 2 ) and the critical heat flux were measured using a smooth aluminum surface. Compared with HFE-7100, Opteon™ 2P50 shows higher heat transfer coefficient (up to 59% higher) and a slightly lower value of critical heat flux (around 5.9% lower). The modified Cooper correlation with the optimized leading constant resulted in reliable prediction accuracy with a 5.3% mean absolute error percentage. Overall, these results indicate that the new dielectric fluid provides similar thermal performance to some legacy fluids.

2P50↗
DOE OSTI2025

Efficiently Computable Limits on EPR Pair Generation in Quantum Broadcast Channels

We investigate the generation of EPR pairs between three observers in a general causally structured setting, where communication occurs via a noisy quantum broadcast channel. The most general quantum codes for this setup take the form of tripartite quantum channels. Since the receivers are constrained by causal ordering, additional temporal relationships naturally emerge between the parties. These causal constraints enforce intrinsic no-signalling conditions on any tripartite operation, ensuring that it constitutes a physically realizable quantum code for a quantum broadcast channel. We analyze these constraints and, more broadly, characterize the most general quantum codes for communication over such channels. We examine the capabilities of codes that are fully no-signalling among the three parties, positive partial transpose (PPT)-preserving, or both, and derive simple semidefinite programs to compute the achievable entanglement fidelity. We then establish a hierarchy of semidefinite programming converse bounds -- both weak and strong -- for the capacity of quantum broadcast channels for EPR pair generation, in both one-shot and asymptotic regimes. Notably, in the special case of a point-to-point channel, our strong converse bound recovers and strengthens existing results. Finally, we demonstrate how the PPT-preserving codes we develop can be leveraged to construct PPT-preserving entanglement combing schemes, and vice versa.

FOS: Physical sciences↗
DOE OSTI2025

Development and Demonstration of a Prototype Molten Salt Sampling System

Molten salt reactors (MSRs) offer potential operability and safety advantages when compared to commercial light water reactors (LWRs). However, operating experience with MSRs is sparse in comparison to what exists for LWRs. Further, the chemical and isotopic composition of the fuel and/or coolant salt is dynamic and difficult to characterize continuously, posing potential safety, operability, and safeguards unknowns that need to be addressed. A molten salt sampling system (MSSS) is regarded as a necessary subsystem within first generation MSRs used to obtain samples of salt for chemical and isotopic analysis in support of the need to monitor and control salt composition during operation. The MSSS is being developed using the Safety-in-Design (SiD) methodology, which incorporates incremental integration of safety analysis into the design process. The MSSS conceptual design emerging from the application of the early stages of the SiD methodology consists of a sample collection system and its housing, a freeze port, and inert gas control and delivery systems. This article describes the prototypes developed to test the functions of these MSSS subsystems, presents the results of testing in both dry and molten salt environments (including reliability data collection performed in accordance with the principles of SiD and the development of a semiquantitative fault tree model), and summarizes the opportunities for future design and testing enhancements based on the results of prototype testing.

molten salt reactor↗
DOE OSTI2024

Deciphering Discrepancies: A Comparative Analysis of Docker Image Security

As the use of microservices continues to grow and become a foundational approach to architecting software solutions, ensuring the security of microservices is paramount. Docker images have emerged as the predominant solution to containerize microservices–and thus, Docker images are becoming a large attack surface. Thus, reducing vulnerabilities in Docker images will reduce microservice cyberattacks. A common way to find vulnerabilities in Docker images employs static analysis tools like Trivy and Grype. However, these tools frequently generate disparate vulnerability reports when analyzing the same Docker image, thus causing uncertainty in tool selection. We collected 927 Docker images, analyzed them with Trivy and Grype, and compared the vulnerabilities reported in each image. Among the 865 images found to have vulnerabilities, Trivy and Grype disagreed on both the number of vulnerabilities and the vulnerability IDs found therein. Since both tools interface with external vulnerability databases, some discrepancies can be attributed to how the tools interface with these external resources. The external vulnerability databases partially overlap and frequently contradict one another, thereby creating challenges for static analysis tool developers and end users alike. This New Ideas and Emerging Results (NIER) study contains new and critical information that practitioners need for selecting and using static analysis tools–given that increases in the use of Docker technologies means increases in the size of the attack surfaces.

Boles, Brittany [Montana State University]↗
DOE OSTI2024

Enabling the Electrification of Offshore Activities – Co-Demonstration of Next-Generation Autonomous Offshore Power System and Resident, Uncrewed Mobile and Static Assets at PacWave Wave Energy Test Site

Oceans cover two-thirds of the earth's surface and form the world's biggest and best – yet largely untapped – battery. Ocean waves have more energy density than other renewables, including wind, solar, and biomass, and have the potential to supply 4x the world's annual energy consumption (Masterson, 2022; Zic, 2020). In addition to the impact wave energy can have on decarbonizing and diversifying the electric grid, it offers a significant value proposition in the emerging blue economy sector (LiVecchi et al, 2019). The blue economy consists of industries operating offshore, including shipping, oil and gas, defense and security, aquaculture, and research. These industries require bringing people and energy on site to perform daily work, but current energy costs in the blue economy are extremely high. Here, the prevailing processes are complex, including shore dependencies and fuel transportation logistics. Few alternatives for reliable power generation exist, with the most prominent being high cost and high carbon emissions diesel generation. Because of this lack of affordable, reliable power, the trends of electrification, digitization, and automation that have led to substantial innovation and improvements in the terrestrial economy over the last two decades are slow to come to the blue economy.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

3D Time-Lapse Electrical Resistivity Imaging of Rock Damage Patterns and Gas Flow Paths Resulting from Two Underground Chemical Explosions

Abstract Rock damage from underground nuclear explosions (UNEs) has a strong influence on sub-surface gas movement and on seismic waveform characteristics, both of which are used to detect UNEs. Although advanced numerical simulation capabilities exist to predict rock damage patterns and corresponding detection signals, those predictions are dependent on (generally) unknown properties of the host rock. For example, the effects of in-situ mechanical heterogeneities on the explosively generated damage/fractures that provide gas flow pathways to the surface are not well understood, due largely to the difficulty in accessing and characterizing the near-source region. In this paper we demonstrate the emerging use of electrical resistivity tomography (ERT) for imaging rock damage and gas flow patterns resulting from two relatively small-scale underground chemical explosions. Pre-explosion ERT and crosshole seismic imaging revealed a natural fracture zone within the test bed. Post-explosion imaging revealed that the damage zone was non-symmetric and was focused primarily within the pre-existing fracture zone, located 10 m above the first explosion and 5 m above the second explosion. Time-lapse ERT imaging of heated air injected into the detonation borehole revealed the primary gas flow paths to be within the upper margin of the same primary damage zone. These results point to the utility of ERT imaging for understanding rock damage and gas flow patterns under experimental conditions, and to the importance of understanding the effects of geologic heterogeneity on UNE detection signals, particularly gas surface breakthrough times.

58 GEOSCIENCES↗
DOE OSTI2024

Numerical analysis of coalescence-induced bubble departure for enhanced boiling heat transfer

Boiling heat transfer plays a crucial role in a wide range of applications, such as power generation, refrigeration, electronics cooling, and pharmaceutics. Among the various factors that influence boiling heat transfer, the dynamics of vapor bubble nucleation, growth, and departure from the heated surface stand out as particularly important. An emerging phenomenon that can promote the departure of bubbles smaller than the Fritz diameter is coalescence-induced departure. If the dynamics of this process are fully understood, then surfaces can be engineered to promote faster bubble departure and substantially increase the performance of boiling heat transfer. Further, this work expands on published results by presenting a detailed numerical analysis of bubble coalescence and departure for a range of initial bubble diameters and size ratios between coalescing bubbles. Analysis of the results is focused on explaining how the release of surface energy and bubble surface dynamics lead to bubble departure, as well as fundamentally distinguishing capillary–inertial jumping and buoyant–inertial departure mechanisms across different bubble sizes and size ratios. The results show that both the initial sizes of the coalescing bubbles and the ratio between their sizes can determine whether the merged bubble will leave the surface through capillary–inertial jumping or buoyant departure. Below a certain bubble size, the release of surface energy by the merger is not sufficient to propel the merged bubble from the surface.

42 ENGINEERING↗
DOE OSTI2022

Advancing biological processing for valorization of plastic wastes

We report the useful applications of plastics are as significant as the problems associated with their disposal. Current waste management strategies are ineffective at preventing the flow of plastics into landfills, wastewater treatment, and the environment. Despite the importance of recycling technologies, most plastics are used for consumables and are discarded after limited usage. Moreover, only certain plastics are recycled, and those that are generally yield lower value products. Discovering alternative routes for valorizing plastic wastes is essential. Emerging research involves the use of biocatalysts (i.e., enzymes and microorganisms) to produce valuable products like specialty polymers, biosurfactants, and drug precursors from these feedstocks. These bioprocesses commonly integrate physio-chemical pretreatments (to generate biologically reactive intermediates) and biological upgrading (to convert intermediates to products). Herein, publications that explore plastic deconstruction technologies and bioprocesses are reviewed with an emphasis on plastic waste valorization. Understanding how microorganisms metabolize the intermediates of plastic degradation and manage their inhibitory effects is a prerequisite for engineering bioprocesses. For these heterogeneous wastes, a paradigm shift from axenic cultivation of microorganisms to cultivation of microbial consortia may benefit conversion efficiency and stress resilience. Thus, a summary is provided for metabolic pathways and constituent enzymes required to synthesize biofuels, biomaterials, and chemicals from biologically reactive intermediates. Colossal challenges associated with the use of plastics as feedstocks for direct biological processing highlight the need for integrating physical, chemical, and biological technologies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Spin Polarization from Circularly Polarized Light Induced Charge Transfer

Here, we show how a spin polarization can be generated through the photoinduced electron transfer of an achiral donor–acceptor complex following chiral light excitation. In particular, we illustrate the basic energetic and symmetry requirements for chirality induced spin selectivity where the chirality emerges from the electronic degrees of freedom following excitation with circularly polarized light. We study this effect in a simple model of a metalloporphyrin complex with an axial acceptor ligand using quantum mechanical rate theories and numerical simulations. We find that the spin polarization emerges due to the selective excitation of a ring current within the porphryin, breaking the degeneracy of the two degenerate spin states. The resultant spin polarization increases with the spin orbit coupling between the metal in the porphyrin and the axial ligand, and is transient, with a lifetime dependent on the rate of dephasing from the Jahn–Teller distortion mode. This proposed effect should be observable in spin-resolved photoemission spectroscopy.

charge transfer↗