Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Enabling the Acquisition of Electron Beam-Induced Current (EBIC) Images in Conventional SEM and STEM Instruments

Electron beam-induced current (EBIC) imaging is a well-established scanning electron microscope (SEM) technique used to analyze the behavior of microelectronic devices including solar cells. Recently, the application of EBIC imaging in an aberration-corrected scanning transmission electron microscope (STEM) has been demonstrated and offers great potential for the in situ study of electronic materials, correlating charge transport properties to atomic structural and elemental information. Here, this work presents two ways to implement EBIC imaging in conventional SEM and STEM systems: one relying on the instrument's inherent scanning and imaging electronics and the other involving third-party systems usually available in electron microscopes. The implementation of lock-in EBIC in systems equipped with a fast beam blanker is also described. In addition, this work shows and discusses the different mechanisms at play in EBIC imaging and their dependence on beam energy, sample impedance, and electrical measurement configuration, providing researchers with the basic information needed to apply the technique to their research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Collective excitations and quantum incompressibility in electron-hole bilayers

In this study, we apply quantum continuum mechanics to the calculation of the excitation spectrum of a coupled electron-hole bilayer. The theory expresses excitation energies in terms of ground-state intra- and interlayer pair correlation functions, which are available from quantum Monte Carlo calculations. The final formulas for the collective modes deduced from this approach coincide with the formulas obtained in the “quasilocalized particle approximation” by Kalman et al. [G. Kalman, V. Valtchinov, and K. I. Golden, Phys. Rev. Lett. 82 , 3124 (1999) ], and likewise the theory predicts the existence of gapped excitations in the charged channel, with the gap arising from electron-hole correlation. An immediate consequence of the gap is that the static density-density response function of the charged channel vanishes as q 2 for wave vector q → 0 , rather than linearly in q , as commonly expected. In this sense, the system is incompressible . This feature, which has no analog in the classical electron-hole plasma, is consistent with the existence of an excitonic ground state and implies the existence of a discontinuity in the chemical potential of electrons and holes when the numbers of electrons and holes are equal. It should be experimentally observable by monitoring the densities of electrons and holes in response to potentials that attempt to change these densities in opposite directions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Investigation of background electron emission in the LUX detector

Dual-phase xenon detectors, as currently used in direct detection dark matter experiments, have observed elevated rates of signals from electron emission processes in the low energy region. While this background negatively impacts detector performance in various ways, its origins have only been partially studied. In this paper, we report a systematic investigation of the electron pathologies observed in the LUX dark matter experiment. We characterize different electron populations based on their emission intensities and their correlations with preceding energy depositions in the detector. By studying these electron backgrounds under different experimental conditions, we identified the possible mechanisms that may contribute to the electron emission. We report the observed electron event rate in LUX after background rejection, and discuss how such backgrounds can be further mitigated in ongoing and future xenon-based dark matter experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Fast event-based electron counting for small-molecule structure determination by MicroED

Electron counting helped realize the resolution revolution in single-particle cryoEM and is now accelerating the determination of MicroED structures. Its advantages are best demonstrated by new direct electron detectors capable of fast (kilohertz) event-based electron counting (EBEC). This strategy minimizes the inaccuracies introduced by coincidence loss (CL) and promises rapid determination of accurate structures. We used the Direct Electron Apollo camera to leverage EBEC technology for MicroED data collection. Given its ability to count single electrons, the Apollo collects high-quality MicroED data from organic small-molecule crystals illuminated with incident electron beam flux densities as low as 0.01–0.045 e − /Å 2 /s. Under even the lowest flux density (0.01 e − /Å 2 /s) condition, fast EBEC data produced ab initio structures of a salen ligand (268 Da) and biotin (244 Da). Each structure was determined from a 100° wedge of data collected from a single crystal in as few as 50 s, with a delivered fluence of only ∼0.5 e − /Å 2 . Fast EBEC data collected with a fluence of 2.25 or 3.33 e − /Å 2 also facilitated a 1.5 Å structure of thiostrepton (1665 Da). While refinement of these structures appeared unaffected by CL, a CL adjustment applied to EBEC data further improved the distribution of intensities measured from the salen ligand and biotin crystals. However, CL adjustment only marginally improved the refinement of their corresponding structures, signaling the already high counting accuracy of detectors with counting rates in the kilohertz range. Overall, by delivering low-dose structure-worthy data, fast EBEC collection strategies open new possibilities for high-throughput MicroED.

EBEC↗
DOE OSTI2023

Extracellular electron uptake from a cathode by the lactic acid bacterium Lactiplantibacillus plantarum

A subset of microorganisms that perform respiration can endogenously utilize insoluble electron donors, such as Fe(II) or a cathode, in a process called extracellular electron transfer (EET). However, it is unknown whether similar endogenous EET can be performed by primarily fermentative species like lactic acid bacteria. We report for the first time electron uptake from a cathode by Lactiplantibacillus plantarum, a primarily fermentative bacteria found in the gut of mammals and in fermented foods. L. plantarum consumed electrons from a cathode and coupled this oxidation to the reduction of both an endogenous organic (pyruvate) and an exogenous inorganic electron acceptor (nitrate). This electron uptake from a cathode reroutes glucose fermentation toward lactate degradation and provides cells with a higher viability upon sugar exhaustion. Moreover, the associated genes and cofactors indicate that this activity is mechanistically different from that one employed by lactic acid bacteria to reduce an anode and to perform respiration. Our results expand our knowledge of the diversity of electroactive species and of the metabolic and bioenergetic strategies used by lactic acid bacteria.

biocathode↗
DOE OSTI2022

Site-Differentiated Iron–Sulfur Cluster Ligation Affects Flavin-Based Electron Bifurcation Activity

Electron bifurcation is an elegant mechanism of biological energy conversion that effectively couples three different physiologically relevant substrates. As such, enzymes that perform this function often play critical roles in modulating cellular redox metabolism. One such enzyme is NADH-dependent reduced-ferredoxin: NADP+ oxidoreductase (NfnSL), which couples the thermodynamically favorable reduction of NAD+ to drive the unfavorable reduction of ferredoxin from NADPH. The interaction of NfnSL with its substrates is constrained to strict stoichiometric conditions, which ensures minimal energy losses from non-productive intramolecular electron transfer reactions. However, the determinants for this are not well understood. One curious feature of NfnSL is that both initial acceptors of bifurcated electrons are unique iron–sulfur (FeS) clusters containing one non-cysteinyl ligand each. The biochemical impact and mechanistic roles of site-differentiated FeS ligands are enigmatic, despite their incidence in many redox active enzymes. Herein, we describe the biochemical study of wild-type NfnSL and a variant in which one of the site-differentiated ligands has been replaced with a cysteine. Results of dye-based steady-state kinetics experiments, substrate-binding measurements, biochemical activity assays, and assessments of electron distribution across the enzyme indicate that this site-differentiated ligand in NfnSL plays a role in maintaining fidelity of the coordinated reactions performed by the two electron transfer pathways. Given the commonality of these cofactors, our findings have broad implications beyond electron bifurcation and mechanistic biochemistry and may inform on means of modulating the redox balance of the cell for targeted metabolic engineering approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effects of soluble electron shuttles on microbial iron reduction and methanogenesis

In many aquatic and terrestrial ecosystems, iron (Fe) reduction by microorganisms is a key part of biogeochemical cycling and energy flux. The presence of redox-active electron shuttles in the environment potentially enables a phylogenetically diverse group of microbes to use insoluble iron as a terminal electron acceptor. We investigated the impact that different electron shuttles had on respiration, microbial physiology, and microbial ecology. We tested eight different electron shuttles, seven quinones and riboflavin, with redox potentials between 0.217 and −0.340 V. Fe(III) reduction coupled with acetate oxidation was observed with all shuttles. Once Fe(III) reduction began to plateau, a rapid increase in acetate consumption was observed and coincided with the onset of methane production, except in the incubations with the shuttle 9,10-anthraquinone-2-carboxylic acid (AQC). The rates of iron reduction, acetate consumption, methanogenesis, and the microbial communities varied significantly across the different shuttles independent of redox potential. In general, shuttles appeared to reduce the overall diversity of the community compared to no shuttle controls, but certain shuttles were exceptions to this trend. Geobacteraceae were the predominant taxonomic family in all enrichments except in the presence of AQC or 1,2-dihydroxyanthraquinone (AQZ), but each shuttle enriched a unique community significantly different from the no shuttle control conditions. This suggests that the presence of different redox-active electron shuttles can have a large influence on the microbial ecology and total carbon flux in the environment.

Anaerobic Redox Reactions↗
DOE OSTI2024

Strong electron–phonon coupling in magic-angle twisted bilayer graphene

The unusual properties of superconductivity in magic-angle twisted bilayer graphene (MATBG) have sparked considerable research interest. However, despite the dedication of intensive experimental efforts and the proposal of several possible pairing mechanisms, the origin of its superconductivity remains elusive. Here, by utilizing angle-resolved photoemission spectroscopy with micrometre spatial resolution, we reveal flat-band replicas in superconducting MATBG, where MATBG is unaligned with its hexagonal boron nitride substrate. These replicas show uniform energy spacing, approximately 150 ± 15 meV apart, indicative of strong electron–boson coupling. Strikingly, these replicas are absent in non-superconducting twisted bilayer graphene (TBG) systems, either when MATBG is aligned to hexagonal boron nitride or when TBG deviates from the magic angle. Calculations suggest that the formation of these flat-band replicas in superconducting MATBG are attributed to the strong coupling between flat-band electrons and an optical phonon mode at the graphene K point, facilitated by intervalley scattering. These findings, although they do not necessarily put electron–phonon coupling as the main driving force for the superconductivity in MATBG, unravel the electronic structure inherent in superconducting MATBG, thereby providing crucial information for understanding the unusual electronic landscape from which its superconductivity is derived.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Understanding how minority relativistic electron populations may dominate charge state balance and radiative cooling of a post-thermal quench tokamak plasma

Minority relativistic electron populations can occur in a range of complex plasmas. Of specific interest is when runaway electrons form among the presence of high-atomic-number ion species in a tokamak plasma discharge. It has been recently demonstrated that ion charge state distributions and radiation losses at low bulk electron temperatures can be dominated by relativistic electrons, even though their density is orders of magnitude lower. Furthermore, this was attributed to the relativistic enhancement of electron impact inelastic cross sections. In this work, we provide a closer inspection of the atomic physics underpinning this effect. We also demonstrate the consequences of runaway enhanced scattering on post-disruption tokamak fusion discharges with neon and argon impurities present. Effects on charge state distributions, radiation and spectral characteristics, and reduced-order modeling considerations are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

High-density polarization-induced 2D electron gases in N-polar pseudomorphic undoped GaN/Al 0.85 Ga 0.15 N heterostructures on single-crystal AlN substrates

The polarization difference and band offset between Al(Ga)N and GaN induce two-dimensional (2D) free carriers in Al(Ga)N/GaN heterojunctions without any chemical doping. A high-density 2D electron gas (2DEG), analogous to the recently discovered 2D hole gas in a metal-polar structure, is predicted in a N-polar pseudomorphic GaN/Al(Ga)N heterostructure on unstrained AlN. We report the observation of such 2DEGs in N-polar undoped pseudomorphic GaN/AlGaN heterostructures on single-crystal AlN substrates by molecular beam epitaxy. With a high electron density of ~4.3 ×10 13 /cm 2 that maintains down to cryogenic temperatures and a room temperature electron mobility of ~450 cm 2 /V s, a sheet resistance as low as ~320 Ω/$\Box$ is achieved in a structure with an 8 nm GaN layer. Finally, these results indicate significant potential of AlN platform for future high-power RF electronics based on N-polar III-nitride high electron mobility transistors.

42 ENGINEERING↗
DOE OSTI2024

Evolution of the Electronic and Excitonic Properties in 2D Ruddlesden–Popper Perovskites Induced by Bifunctional Ligands

2D Ruddlesden–Popper metal‐halide perovskites exhibit structural diversity due to a variety of choices of organic ligands. Incorporating bifunctional ligands in such materials is particularly intriguing since it can result in novel electronic properties and functions. However, an in‐depth understanding of the effects of bifunctional ligands on perovskite structures and, consequently, their electronic and excitonic properties, is still lacking. Here, in this work, n = 1 2D perovskites built with organic ligands containing ─CN, ─OH, ─COOH, ─phenyl (Ph), and ─CH 3 functional groups are investigated using ultraviolet and inverse photoemission spectroscopies, density functional theory calculations, and tight‐binding model analyses. The experimentally determined electronic gaps of the ─CN, ─COOH, ─Ph, and ─CH 3 based perovskites exhibit a strong correlation with the in‐plane Pb─I─Pb bond angle, while the ─OH based perovskite deviates from the linear trend. Based on the band structure calculations, this anomaly is attributed to the out‐of‐plane dispersion, caused predominantly by significant interlayer electronic coupling that is present in ─OH based perovskites. These results highlight the complex and diverse impacts of organic ligands on electronic properties, especially in terms of the involvement of strong interlayer electronic coupling. The impact of the bifunctional ligands on the evolution of the exciton binding energy is also addressed.

2D perovskites↗
DOE OSTI2021

Understanding flavin electronic structure and spectra

Abstract Flavins have emerged as central to electron bifurcation, signaling, and countless enzymatic reactions. In bifurcation, two electrons acquired as a pair are separated in coupled transfers wherein the energy of both is concentrated on one of the two. This enables organisms to drive demanding reactions based on abundant low‐grade chemical fuel. To enable incorporation of this and other flavin capabilities into designed materials and devices, it is essential to understand fundamental principles of flavin electronic structure that make flavins so reactive and tunable by interactions with protein. Emerging computational tools can now replicate spectra of flavins and are gaining capacity to explain reactivity at atomistic resolution, based on electronic structures. Such fundamental understanding can moreover be transferrable to other chemical systems. A variety of computational innovations have been critical in reproducing experimental properties of flavins including their electronic spectra, vibrational signatures, and nuclear magnetic resonance (NMR) chemical shifts. A computational toolbox for understanding flavin reactivity moreover must be able to treat all five oxidation and protonation states, in addition to excited states that participate in flavoprotein's light‐driven reactions. Therefore, we compare emerging hybrid strategies and their successes in replicating effects of hydrogen bonding, the surrounding dielectric, and local electrostatics. These contribute to the protein's ability to modulate flavin reactivity, so we conclude with a survey of methods for incorporating the effects of the protein residues explicitly, as well as local dynamics. Computation is poised to elucidate the factors that affect a bound flavin's ability to mediate stunningly diverse reactions, and make life possible. This article is categorized under: Structure and Mechanism > Computational Biochemistry and Biophysics Electronic Structure Theory > Combined QM/MM Methods Theoretical and Physical Chemistry > Spectroscopy

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Electron impact ionization in dense plasmas

Here, the distorted-wave with exchange (DWE) method is employed to evaluate electron impact ionization cross sections in dense electron–ion plasmas. Bound and continuum electron wave functions are obtained from a non-relativistic average-atom code. Plots of DWE cross sections are presented for 1s electrons in Li and Be plasmas and 2p electrons in Na and Mg plasmas. For each of these elements, cross sections are evaluated at metallic density in a range of temperatures from 10 to 100 eV and at their respective melting points. Resonances in the cross sections appear near the incident energy threshold at high temperatures. The origin of these resonances is discussed. In general, the distorted wave (DW) method without exchange is found to be a good approximation to the DWE method for electron impact ionization calculations. In the resonance region, however, exchange effects are found to be very important and cannot be neglected.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

A reversible four-electron Sn metal aqueous battery

Sn is a promising metal anode for aqueous batteries, with up to four-electron redox available per atom (903 mAh g −1 Sn ). However, practically harnessing the four-electron Sn(OH) 6 2− /Sn reversibility remains challenging due to limited mechanistic understanding. Here, in this study, we reveal a kinetically asymmetric redox pathway involving a successive four-electron plating and a stepwise 2 + 2 electron stripping through a Sn(OH) 3 − intermediate. The crossover of Sn(OH) 3 − induces a reversible self-discharge that reduces Coulombic efficiency but does not impact cyclability, demonstrated by four-electron Sn-Ni full cells that sustain >800 h of stable cycling. By tuning the ion selectivity of the separator to suppress Sn(OH) 3 − crossover while allowing OH − transport, we further demonstrate high Sn utilization (67%) and high energy density (143.1 Wh L −1 cell). The results provide key understandings of the tradeoffs in engineering reversible multi-electron metal anodes and define a new benchmark for practical energy density that exceeds any Sn-based aqueous batteries to date.

SN anode↗
DOE OSTI2022

Electron doping of NdNiO 3 thin films using dual chamber CaH 2 annealing

Hydrogen donor doping has been exploited as a strategy to manipulate the electronic structure and electrical properties of functional oxide systems. Especially, the development of synthetic methods to achieve electron doping of perovskite rare-earth nickelate thin films utilizing interstitial hydrogen is highly desirable considering the rich electronic phase diagram hosting several functional properties. Here, in this work, we present the hydrogenation of NdNiO 3 (NNO) thin films using CaH 2 annealing and the resulting giant modulation of electrical resistivity in hydrogenated NNO (H–NNO) thin films. Magnetron sputtering was employed to deposit epitaxial ~60 nm-thin NNO films on single crystal LaAlO 3 (LAO) substrates. The formation of the pristine perovskite NNO phase was realized after annealing the films at 500 °C for 24 h. CaH 2 annealing of NNO thin films for time durations ranging from 1 to 6 h was performed in a vacuumed ampule with two interconnected chambers at 280 °C. The two-chamber design enables a simple and clean approach for hydrogen doping without physical contact between the powder and sample of interest. X-ray diffraction and Raman spectroscopy revealed the formation of NNO in pristine samples, and the subsequent hydrogen incorporation upon CaH 2 annealing without forming any impurity phases. The conversion of the oxidation state of Ni towards +2 upon CaH 2 annealing was probed using X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. Consequently, a substantial increase in the room-temperature resistivity was observed upon CaH 2 annealing indicating the formation of a strongly correlated electronic configuration of Ni in H–NNO due to electron doping. Overall, the findings of this study highlight the versatility of CaH 2 annealing as an electron doping method to tune the electrical properties of correlated oxides at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Accurate determination of the electron spin polarization in magnetized iron and nickel foils for Møller polarimetry

The Møller polarimeter in Hall A at Jefferson Lab in Newport News, VA, has provided reliable measurements of electron beam polarization for the past two decades. Past experiments have typically required polarimetry at the 1% level of absolute uncertainty which the Møller polarimeter has delivered. However, the upcoming proposed experimental program including MOLLER and SoLID have stringent requirements on beam polarimetry precision at the level of 0.4% (The MOLLER Collaboration, 2014; The SoLID collaboration, 2019), requiring a systematic re-examination of all the contributing uncertainties. Møller polarimetry uses the double polarized scattering asymmetry of a polarized electron beam on a target with polarized atomic electrons. The target is a ferromagnetic material magnetized to align the spins in a given direction. In Hall A, the target is a pure iron foil aligned perpendicular to the beam and magnetized out of plane parallel or antiparallel to the beam direction. The acceptance of the detector is engineered to collect scattered electrons close to 90° in the center of mass frame where the analyzing power is a maximum (-7/9). One of the leading systematic errors comes from determination of the target foil polarization. Polarization of a magnetically saturated target foil requires knowledge of both the saturation magnetization and g', the electron g-factor which includes components from both spin and orbital angular momentum from which the spin fraction of magnetization is determined. Target foil polarization has been previously addressed in a 1997 publication “A precise target for Møller polarimetry” by de Bever et al. (1997) at a level of precision sufficient for experiments up to this point. Several shortcomings with the previous published value require revisiting the result prior to MOLLER. Here, we utilize the existing world data to provide a best estimate for target polarization for both nickel and iron foils including uncertainties in magnetization, high-field and temperature dependence, and fractional contribution to magnetization from orbital effects. We determine the foil electron spin polarization at 294 K to be 0.08020 ± 0.00018 (@4 T applied field) for iron and 0.018845+/-0.000053 (@2 T applied field) for nickel. Finally, we conclude with a brief discussion of additional systematic uncertainties to Møller polarimetry using this technique.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Secondary-electron imaging of bulk crystalline specimens in an aberration corrected $\text{STEM}$

Atomic-scale electron microscopy traditionally probes thin specimens, with thickness below 100 nm, and its feasibility for bulk samples has not been documented. Here in this study, we explore the practicality of scanning transmission electron microscope (STEM) imaging with secondary electrons (SE), using a silicon-wedge specimen having a maximum thickness of 18 μm. We find that the atomic structure is present in the entire thickness range of the SE images although the background intensity increases moderately with thickness. The consistent intensity of secondary electron (SE) images at atomic positions and the modest increase in intensity in between (background) observed in silicon suggest a limited contribution from SEs generated by backscattered electrons, a conclusion supported by our multislice calculations. We conclude that achieving atomic resolution in SE imaging for bulk specimens is indeed attainable using aberration-corrected STEM and that an aberration-corrected scanning electron microscope (SEM) may have the capacity for atomic-level resolution, holding great promise for future strides in materials research.

25 ENERGY STORAGE↗
DOE OSTI2022

Very-High Dynamic Range, 10,000 Frames/Second Pixel Array Detector for Electron Microscopy

Precision and accuracy of quantitative scanning transmission electron microscopy (STEM) methods such as ptychography, and the mapping of electric, magnetic, and strain fields depend on the dose. Reasonable acquisition time requires high beam current and the ability to quantitatively detect both large and minute changes in signal. A new hybrid pixel array detector (PAD), the second-generation Electron Microscope Pixel Array Detector (EMPAD-G2), addresses this challenge by advancing the technology of a previous generation PAD, the EMPAD. The EMPAD-G2 images continuously at a frame-rates up to 10 kHz with a dynamic range that spans from low-noise detection of single electrons to electron beam currents exceeding 180 pA per pixel, even at electron energies of 300 keV. The EMPAD-G2 enables rapid collection of high-quality STEM data that simultaneously contain full diffraction information from unsaturated bright-field disks to usable Kikuchi bands and higher-order Laue zones. Test results from 80 to 300 keV are presented, as are first experimental results demonstrating ptychographic reconstructions, strain and polarization maps. We introduce a new information metric, the maximum usable imaging speed (MUIS), to identify when a detector becomes electron-starved, saturated or its pixel count is mismatched with the beam current.

36 MATERIALS SCIENCE↗