Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Nonthermal X-rays and related processes

The hard X-rays associated with solar flares represent the bremsstrahlung of nonthermal electron streams. In the initial phase of the flare, the X-rays probably come from a dense region in the chromosphere, as a consequence of precipitation from the lower corona. A gradual nonthermal X-ray burst may occur in a later phase, probably caused by the electrons responsible for the type 4 burst. The bombardment of the chromosphere during the early phase of the flare releases a large amount of energy there. This energy can support many of the observed flash-phase phenomena. We therefore consider this picture of flare energetics: The energy initially goes into fast particles. These interact with the chromosphere, which expands to form the hot region observed in the corona. This hot region then provides energy for many of the main-phase flare phenomena, such as H-alpha emission. The bulk of the energy in the bombardment must reside in the electron component. A clear test of the whole picture lies in its prediction of a strong infrared excess during the flash phase.

Hudson, H. S.↗

Design evaluation: S-band exciters

A design evaluation study was conducted to produce S-band exciter (SBE) system to provide a highly stable phase or modulated carrier for transmission to spacecraft. The exciter is part of an S-band receiver/exciter/ranging system at Spaceflight Tracking and Data Network (STDN) ground stations. The major features of the system are defined. Circuit diagrams of the electronic components are provided.

Source record↗

Design and performance of Skylab thermal/environmental control system

The function of the thermal/environmental control systems was to provide a comfortable thermal environment for the crew, to cool electronic components, to supply a controlled oxygen/nitrogen atmosphere, and to remove moisture, carbon dioxide, odors, and trace contaminants from the atmosphere. A separate refrigeration system was used to chill and freeze food and biomedical samples and to provide cold water for drinking. This paper describes system design and compares in-flight performance to preflight predictions. A discussion of in-flight anomalies and corrective actions is also included.

Hopson, G. D.↗

Precision compliance techniques for slow crack growth measurements

A method is presented for using simple electronic components to obtain the high sensitivity needed to measure very slow crack growth rates. The technique presented can reduce the experimental time considerably and also yield a greater amount of data more accurately than optical techniques for measuring crack growth rates.

Noronha, P. J.↗

Unsteady loads due to propulsive lift configurations

The flow of a jet over an airfoil representative of upper surface blowing was studied using laser techniques. Experimental techniques were developed for the investigation of unsteady pressures behind a cold model jet. Construction of a 1/4 scale model of the 'Beach' test configuration was completed along with construction of a portable detector. The portable detector is used in conjunction with a laser to measure jet flows during tests on the 'Beach' facility. The detector incorporates both optical and electronic components.

Morton, J. B.↗

Differential absorption and scattering sensitivity predictions

A set of general equations for evaluating the sensitivity of the Differential Absorption and Scattering (DAS) technique based upon a conventional analysis of statistical errors is derived. The equations are put in a proper form for evaluating total column density and range resolved concentration measurements of a variety of atmospheric species. The derived equation are subsequently used to analyze the sensitivity of DAS in three specific applications assuming realistic parameters for the optical and electronic components of proposed DAS systems. The three DAS applications evaluated are: (1) measurement of nitrogen at ground levels over a horizontal path; (2) measurement of atmospheric ozone depletion in the wake of a jet engine at 20 km altitude; and (3) measurements of the ozone distribution in the atmosphere from an orbiting space platform, in a downward viewing mode. The results of this study have shown that with reasonable laser energy and telescope receiver dimensions, DAS is capable of meeting requirements for performing these measurements.

Thompson, R. T., Jr.↗

Electromagnetic instabilities driven by unequal proton beams in the solar wind

The paper sets forth a numerical investigation of the linear dispersion relation for typical solar wind conditions at 1 AU during those times (high-speed streams) when a secondary beam of protons drifting relative to the main proton component is present. Three beam-driven instabilities were found to occur as the beam drift velocity approaches the Alfven speed: (1) a pure, field-aligned magnetosonic wave that is most important at relatively high beta and/or high beam drift speeds; (2) an oblique magnetosonic wave having highest growth rates 15-30 deg from the magnetic field; and (3) an oblique Alfven wave having maximum growth rates at increasing angle to the magnetic field. The linear growth rates for the field-aligned magnetosonic and the Alfven oblique modes are investigated as a function of relative beam density, varying anisotropic pitch angle distributions for the various components, electron temperature, and electron heat flux.

Montgomery, M. D.↗

Status of research into lightning effects on aircraft

Developments in aircraft lightning protection since 1938 are reviewed. Potential lightning problems resulting from present trends toward the use of electronic controls and composite structures are discussed, along with presently available lightning test procedures for problem assessment. The validity of some procedures is being questioned because of pessimistic results and design implications. An in-flight measurement program is needed to provide statistics on lightning severity at flight altitudes and to enable more realistic tests, and operators are urged to supply researchers with more details on electronic components damaged by lightning strikes. A need for review of certain aspects of fuel system vulnerability is indicated by several recent accidents, and specific areas for examination are identified. New educational materials and standardization activities are also noted.

Plumer, J. A.↗

A heavy ion beam probe system for investigation of a modified Penning discharge

An ion beam probe diagnostic system can measure time- and space-resolved profiles of plasma space potential and electron density. In combination with a computer iterative technique, the ion beam probe can determine both the space potential profile in plasmas containing strong electric fields and potentials comparable in magnitude to the energy of the probing ion beam. During ion beam probing of a modified Penning discharge, several groups of secondary ions were observed coming from the plasma with a fixed primary beam energy and momentum. The energies of these ions were within 10 percent of the values predicted by a computer-generated model of the potential profile in the plasma. The mechanical and electronic components of the system are described, with particular emphasis on those features required to probe plasma potentials comparable in magnitude to the ion beam energy.

Kambic, G. X.↗

An extensive bibliography on long baseline interferometry

Long baseline interferometry has grown from a simple concept of an optical device for detecting light fringes to a highly theoretical and sophisticated system assisted by computers and modern electronic components. The areas of applications include radio astronomy, radio science, geodesy, tectonics, space navigation, and seismology.

Benjauthrit, B.↗

Electrical Prototype Power Processor for the 30-cm Mercury electric propulsion engine

An Electrical Prototpye Power Processor has been designed to the latest electrical and performance requirements for a flight-type 30-cm ion engine and includes all the necessary power, command, telemetry and control interfaces for a typical electric propulsion subsystem. The power processor was configured into seven separate mechanical modules that would allow subassembly fabrication, test and integration into a complete power processor unit assembly. The conceptual mechanical packaging of the electrical prototype power processor unit demonstrated the relative location of power, high voltage and control electronic components to minimize electrical interactions and to provide adequate thermal control in a vacuum environment. Thermal control was accomplished with a heat pipe simulator attached to the base of the modules.

Biess, J. J.↗

Noncontact strain measurement

Electro-optical extensometer containing optical and electronic components measures displacement in simulated turbine blade thermally cycled into and out of hot-gas stream. Innovation is useful in obtaining accurate strain histories for components subjected to severe thermal environments and other environmental changes.

Bizon, P. T.↗

Stress-relieved solder joints

Mechanical stress on solder joints is reduced by procedure for soldering electronic components to circuit boards. Procedure was developed for radio-frequency (RF) strip-line circuits, for which dimensions must be carefully controlled to minimize parasitic capacitance and inductance. Procedure consists of loosening component from its mounting after each lead is soldered relieving induced stresses before next soldering step.

Zemenick, C. J.↗

Magnetospheric electrostatic emissions and cold plasma densities

A synoptic study of electric wave, magnetometer, and plasma data from Imp 6 has been carried out for times when banded electrostatic waves are observed between harmonics of the electron gyrofrequency in the earth's outer magnetosphere. Four separate classes of such waves have previously been identified by us. The spatial and temporal occurrences of waves in each class are summarized here, as are correlations of occurrence with geomagnetic activity. Most importantly, associations between the observations of waves of different classes and the relative portions of cold and hot electrons present at the position of the spacecraft are established. The cold to hot ratio varies in accordance with the predictions of our previous theoretical work, which models the emission as arising unstably from a hot loss cone distribution existing simultaneously with a cold isotropic electron component. Finally, evidence for the signature of the loss cone is sought in the plasma data.

Hubbard, R. F.↗

Correlated whistler and electron plasma oscillation bursts detected on ISEE-3

The ISEE-3 plasma wave instrument detects associated bursts of electron plasma oscillations and whistler mode waves at an average rate of event one every two days. The plasma wave measurements give the electron number density, and simultaneously measured E and B amplitudes are used to deduce an index of refraction consistent with whistler mode propagation for the measured number density and magnetic field. Burst durations are a few minutes, with some trains of bursts lasting up to an hour. Individual spectral scans (two per second) reveal that the whistler and plasma wave amplitude-time profiles differ within a burst. Peak plasma wave amplitudes are near one mV/m, and the peak whistler mode energy density exceeds that of the plasma oscillations by about a factor 100. The frequency of the whistler mode wave observed in one well diagnosed event agrees with the predictions of the heat flux whistler instability theory. The associated plasma wave instability probably requires a bump-on-tail feature in the heat flux electron component, possibly due to impulsive heating elsewhere on the field-line connecting to ISEE-3.

Kennel, C. F.↗

Rocket measurements of energetic particles in the midlatitude precipitation zone

Measurements of energetic ion and electron properties as a function of altitude in the midlatitude zone of nighttime energetic particle precipitation are reported. The measurements of particle fluxes, energy spectra and pitch angle distributions were obtained by a Langmuir probe, six energetic particle spectrometers and an electrostatic analyzer on board a Nike Apache rocket launched near the center of the midlatitude zone during disturbed conditions. It is found that the incident flux was primarily absorbed rather than backscattered, and consists of mainly energetic hydrogen together with some helium and a small energetic electron component. Observed differential energy spectra of protons having an exponential energy spectrum, and pitch angle distributions at various altitudes indicate that the energetic particle flux decreases rapidly for pitch angles less than 70 deg. An energetic particle energy flux of 0.002 ergs/sq cm per sec is calculated which indicates the significance of energetic particles as a primary nighttime ionization source for altitudes between 120 and 200 km in the midlatitude precipitation zone.

Voss, H. D.↗

Materials processing in space: Future technology trends

NASA's materials processing in space- (MPS) program involves both ground and space-based research and looks to frequent and cost effective access to the space environment for necessary progress. The first generation payloads for research are under active design and development. They will be hosted by the Space Shuttle/Spacelab on Earth orbital flights in the early 1980's. hese missions will focus on the acquisition of materials behavior research data, the potential enhancement of Earth based technology, and the implementation of space based processing for specialized, high value materials. Some materials to be studied in these payloads may provide future breakthroughs for stronger alloys, ultrapure glasses, superior electronic components, and new or better chemicals. An operational 25 kW power system is expected to be operational to support sustained, systematic space processing activity beyond shuttle capability for second generation payload systems for SPACELAB and free flyer missions to study solidification and crystal growth and to process metal/alloys, glasses/ceramics, and chemicals and biologicals.

Barter, N. J.↗

A survey of space radiation effects

The effects of space radiation and its significance for space missions, as they increase in scope, duration, and complexity are discussed. Type of radiation hazard may depend on location or on special equipment used. It is emphasized that it is necessary to search for potential radiation problems in the design stage of a mission. Problem areas such as radiation damage to solar cells and the revolutionary advances are discussed. Radiation effect to electronics components other than solar cells, and several specialized areas such as radioactivity and luminescence are also examined.

Hill, C. W.↗