Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron delocalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

General Method for Determining Redox Potentials without Electrolyte

A novel method to determine redox potentials without electrolyte is presented here. The method is based on a new ability to determine the dissociation constant, $K°_d$, for ion pairs formed between any radical anion and any inert electrolyte counterion. These dissociation constants can be used to determine relative shifts of redox potential as a function of electrolyte concentration, connecting referenced potentials determined with electrochemistry (with 0.1 M electrolyte) to electrolyte-free values. Pulse radiolysis created radical anions enabling determination of equilibrium constants for electron transfer between anions of donor and acceptor molecules as a function of electrolyte concentration in THF. The measurements determined “composite equilibrium constants”, $K_{eqC}$, which contain information about the dissociation constant for the electrolyte cations, X + , with the radical anions of both the donor, $K°_d$(D –• ,X + ) and the acceptor, $K°_d$(A –• ,X + ). Dissociation constants were obtained for a selection of radical anions with tetrabutylammonium (TBA + ). The electrolyte was found to shift the reduction potentials of small molecules 1-methylpyrene and trans-stilbene by close to +130 mV whereas oligo-fluorenes and polyfluorenes experienced shifts of only (+25 ± 6) mV due to charge delocalization weakening the ion pair. These shifts for reduction of aromatic hydrocarbon molecules are smaller than shifts of +232 and +451 mV seen previously for benzophenone radical anion with TBA + and Na + respectively where the charge on the radical anion is localized largely on one C=O bond, thus forming a more tightly bound ion pair.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

cis-trans Germanium chains in the intermetallic compounds ALi{sub 1-x}In{sub x}Ge{sub 2} and A{sub 2}(Li{sub 1-x}In{sub x}){sub 2}Ge{sub 3} (A=Sr, Ba, Eu)-experimental and theoretical studies

Two types of strontium-, barium- and europium-containing germanides have been synthesized using high temperature reactions and characterized by single-crystal X-ray diffraction. All reported compounds also contain mixed-occupied Li and In atoms, resulting in quaternary phases with narrow homogeneity ranges. The first type comprises EuLi{sub 0.91(1)}In{sub 0.09}Ge{sub 2}, SrLi{sub 0.95(1)}In{sub 0.05}Ge{sub 2} and BaLi{sub 0.99(1)}In{sub 0.01}Ge{sub 2}, which crystallize in the orthorhombic space group Pnma (BaLi{sub 0.9}Mg{sub 0.1}Si{sub 2} structure type, Pearson code oP16). The lattice parameters are a=7.129(4)-7.405(4) A; b=4.426(3)-4.638(2) A; and c=11.462(7)-11.872(6) A. The second type includes Eu{sub 2}Li{sub 1.36(1)}In{sub 0.64}Ge{sub 3} and Sr{sub 2}Li{sub 1.45(1)}In{sub 0.55}Ge{sub 3}, which adopt the orthorhombic space group Cmcm (Ce{sub 2}Li{sub 2}Ge{sub 3} structure type, Pearson code oC28) with lattice parameters a=4.534(2)-4.618(2) A; b=19.347(8)-19.685(9) A; and c=7.164(3)-7.260(3) A. The polyanionic sub-structures in both cases feature one-dimensional Ge chains with alternating Ge-Ge bonds in cis- and trans-conformation. Theoretical studies using the tight-binding linear muffin-tin orbital (LMTO) method provide the rationale for optimizing the overall bonding by diminishing the {pi}-p delocalization along the Ge chains, accounting for the experimentally confirmed substitution of Li forIn. -- Graphical abstract: Presented are the single-crystal structures of two types of closely related intermetallics, as well as their band structures, calculated using tight-binding linear muffin-tin orbital (TB-LMTO-ASA) method. Display Omitted

36 MATERIALS SCIENCE↗

Why MnIn{sub 2}O{sub 4} spinel is not a transparent conducting oxide?

The title compound has been synthesized by a citrate technique. The crystal structure has been investigated at room temperature from high-resolution neutron powder diffraction (NPD) data. It crystallizes in a cubic spinel structure, space group Fd3-bar m, Z=8, with a=9.0008(1) A at 295 K. It exhibits a crystallographic formula (Mn{sub 0.924(2)}In{sub 0.076(2)}){sub 8a}(In{sub 1.804(2)}Mn{sub 0.196(2)}){sub 16d}O{sub 4}, where 8a and 16d stand for the tetrahedral and octahedral sites of the spinel structure, respectively, with a slight degree of inversion, {lambda}=0.08. MnIn{sub 2}O{sub 4} shows antiferromagnetic interactions below T{sub N} Almost-Equal-To 40 K, due to the statistical distribution of Mn ions over the two available sites. Unlike the related MgIn{sub 2}O{sub 4} and CdIn{sub 2}O{sub 4} spinels, well known as transparent conducting oxides, MnIn{sub 2}O{sub 4} is not transparent and shows a poor conductivity ({sigma}=0.38 S cm{sup -1} at 1123 K): the presence of Mn ions, able to adopt mixed valence states, localizes the charges that, otherwise, would be delocalized in the spinel conduction band. - Graphical Abstract: From NPD data the crystallographic formula (Mn{sub 0.924(2)}In{sub 0.076(2)}){sub 8a}(In{sub 1.804(2)}Mn{sub 0.196(2)}){sub 16d}O{sub 4}, shows a slight degree of inversion, {lambda}=0.08 and a certain In deficiency. The presence of Mn ions, able to adopt mixed oxidation states, localize the charges that, otherwise, would be delocalized in the spinel conduction band; the presence of localized Mn{sup 2+} and Mn{sup 3+} ions provides the characteristic brown color. Highlights: Black-Right-Pointing-Pointer Accurate structural determination from NPD data: inversion degree (8%), and In deficiency. Black-Right-Pointing-Pointer Bond-valence indicates Mn{sup 2+}-Mn{sup 3+} ions; edge-sharing octahedra contain 90% In{sup 3+}+10% Mn{sup 3+} cations. Black-Right-Pointing-Pointer Conductivity several orders of magnitude lower than those of MgIn{sub 2}O{sub 4} or CdIn{sub 2}O{sub 4}. Black-Right-Pointing-Pointer Variability of Mn oxidation states cancels any electron-doping effect, emptying conduction band of mobile charge carriers. Black-Right-Pointing-Pointer Curie-Weiss behavior confirming the determined charge distribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge transfer properties of diphenyl substituted cyclopentadithiophene organic semiconductors: The role of fluorine and malononitrile substitutions and crystal ordering

The geometry and electronic structures of four cyclopentadithiophene (CPD) derivatives in their crystals are systematically studied through density functional theory (DFT) calculations. The factors influencing the CPDs' semiconductor nature and charge carrier mobility are analyzed in detail, revealing the different roles of fluorine and dicyanomethylene in the CPDs examined in this study. Malononitrile substitutions show a large effect in lowering the molecular LUMO energy level but induce a smaller charge transfer integral due to the resulting reduced crystal order caused by the resulting steric hindrance. In comparison, although F substitution lowers the LUMO level more weakly than C(CN) 2 substitution, it allows the molecule to retain a more planar configuration with more orbital delocalization, and the crystals of the F substituted compounds are more ordered than those of the C(CN) 2 substituted compounds. Overall, this comparison can explain why F substitution is a more effective method to cause a transition of a p-type semiconductor to n-type. Crystal ordering plays a significant role in determining the charge transfer mobility in devices. In spite of the advantage offered by dicyanomethylene substitution in terms of charge injection barrier compared to fluorine substitution, the reduced crystal order caused by C(CN) 2 limits the charge transfer in CPDs with C(CN) 2 substitution. The validity of these findings can be generalized, which is expected to contribute to the rational design of n-type semiconductors based on CPDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable magneto-optical properties in MoS 2 via defect-induced exciton transitions

The presence of chalcogen vacancies in monolayer transition metal dichalcogenides (TMDs) leads to excitons with mixed localized-delocalized character and to reduced valley selectivity. Recent experimental advances in defect design in TMDs allow for a close examination of such mixed exciton states as a function of their degree of circular polarization under external magnetic fields, revealing strongly varying defect-induced magnetic properties. A theoretical understanding of these observations and their physical origins demands a predictive, structure-sensitive theory. In this work, we study the effect of chalcogen vacancies on the exciton magnetic properties in monolayer MoS 2 . Using many-body perturbation theory, we show how the complex excitonic picture associated with the presence of defects—with reduced valley and spin selectivity due to hybridized electron-hole transitions—leads to a structurally controllable exciton magnetic response. We find a variety of $\textit{g}$-factors with changing magnitudes and sign depending on the exciton energy and character. Further, our findings suggest a pathway to tune the nature of the excitons—and by that their magneto-optical properties—through defect architecture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magic-angle semimetals

Abstract Breakthroughs in two-dimensional van der Waals heterostructures have revealed that twisting creates a moiré pattern that quenches the kinetic energy of electrons, allowing for exotic many-body states. We show that cold atomic, trapped ion, and metamaterial systems can emulate the effects of a twist in many models from one to three dimensions. Further, we demonstrate at larger angles (and argue at smaller angles) that by considering incommensurate effects, the magic-angle effect becomes a single-particle quantum phase transition (including in a model for twisted bilayer graphene in the chiral limit). We call these models “magic-angle semimetals”. Each contains nodes in the band structure and an incommensurate modulation. At magic-angle criticality, we report a nonanalytic density of states, flat bands, multifractal wave functions that Anderson delocalize in momentum space, and an essentially divergent effective interaction scale. As a particular example, we discuss how to observe this effect in an ultracold Fermi gas.

Materials Science↗

Conducting Polymer: Polyaniline

Electronically conductive polymers composites have gained tremendous attention over the last decade due to their unique properties for various applications such as rechargeable batteries, electromagnetic shielding, sensors and electronic devices. Polyaniline has been one of the most popular conducting polymer for the past fifty years. It has low density, good environmental stability, moderate conductivity and is considered as one of the most promising electrically conducting polymers. Polyaniline exists in three forms (Fig. 1): Leucoemeraldine, pernigraniline, and emeraldine. Leucoemeraldine is the fully reduced state and is white/clear colorless. Pernigraniline is the fully oxidized state with imine links instead of amine links and is blue/violet. The emeraldine form of polyaniline, often referred as emeraldine base (EB), is neutral and blue. When EB is doped, it turns green and is called emeraldine salt (ES) with the imine nitrogens protonated by an acid. EB delocalizes to the trapped diiminoquinone-diaminobenzene state, which is highly electrically conducting. Emeraldine base is regarded as the most useful form of polyaniline due to its high stability at room temperature. In this experiment, EB is doped with two different protonic acids (Fig. 3), 2-Acrylamido-2-methylpropane sulfonic acid (AMPSA) and camphorsulfonic acid (CSA), to compare the effectiveness of the dopants. The doped EB (ES) is later casted into films with a new resin to produce new polyaniline conductive composites and their conductivities are being studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron transport in graphene/graphene side-contact junction by plane-wave multiple-scattering method

Electron transport in graphene is along the sheet but junction devices are often made by stacking different sheets together in a “side-contact” geometry which causes the current to flow perpendicular to the sheets within the device. Such geometry presents a challenge to first-principles transport methods. We solve this problem by implementing a plane-wave-based multiple-scattering theory for electron transport. In this study, this implementation improves the computational efficiency over the existing plane-wave transport code, scales better for parallelization over large number of nodes, and does not require the current direction to be along a lattice axis. As a first application, we calculate the tunneling current through a side-contact graphene junction formed by two separate graphene sheets with the edges overlapping each other. We find that transport properties of this junction depend strongly on the AA or AB stacking within the overlapping region as well as the vacuum gap between two graphene sheets. Finally, such transport behaviors are explained in terms of carbon orbital orientation, hybridization, and delocalization as the geometry is varied.

36 MATERIALS SCIENCE↗

Direct measurement of 5f delocalization with U XES

Delocalization of the 5f states in the early actinides in general and U metal in particular is significantly important and yet poorly understood. Here, extant spectroscopic techniques have failed to resolve the situation. Here it will be shown that X-Ray Emission Spectroscopy (XES) of the M 4,5 levels can provide the needed information, with a distinct difference between the delocalized U metal and localized uranium dioxide and uranium tetrafluoride cases. A Peak Ratio (PR) model, built upon electric dipole selection rules, has been developed and utilized, with quantitative agreement between experiment and theory. Possible expansion to other types of 5f mixing systems will be discussed.

36 MATERIALS SCIENCE↗

Photon correlations in a two-site nonlinear cavity system under coherent drive and dissipation

We calculate the normalized second-order correlation function for a system of two tunnel-coupled photonic resonators, each one exhibiting a single-photon nonlinearity of the Kerr type. We employ a full quantum formulation: The master equation for the model, which takes into account both a coherent continuous drive and radiative as well as nonradiative dissipation channels, is solved analytically in steady state through a perturbative approach, and the results are compared to exact numerical simulations. The degree of second-order coherence displays values between 0 and 1, and divides the diagram identified by the two energy scales of the system - the tunneling and the nonlinear Kerr interaction - into two distinct regions separated by a crossover. When the tunneling term dominates over the nonlinear one, the system state is delocalized over both cavities, and the emitted light is coherent. In the opposite limit, photon blockade sets in, and the system shows an insulatorlike state with photons locked on each cavity, identified by antibunching of emitted light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Is the Orbital-Selective Mott Phase Stable against Interorbital Hopping?

The localization-delocalization transition is at the heart of strong correlation physics. Recently, there is great interest in multiorbital systems where this transition can be restricted to certain orbitals, leading to an orbital-selective Mott phase (OSMP). Theoretically, the OSMP is widely studied for kinetically decoupled orbitals, but the effect of interorbital hopping remains unclear. Here, we show how nonlocal interorbital hopping leads to local hybridization in single-site dynamical mean-field theory (DMFT). Under fairly general circumstances, this implies that, at zero temperature, the OSMP, involving the Mott-insulating state of one orbital, is unstable against interorbital hopping to a different, metallic orbital. We further show that the coherence scale below which all electrons are itinerant is very small and gets exponentially suppressed even if the interorbital hopping is not overly small. Within this framework, the OSMP with interorbital hopping may thus reach down to extremely low temperatures T, but not to T = 0. Accordingly, it is part of a coherence-incoherence crossover and not a quantum critical point. Finally, we present analytical arguments supported by numerical results using the numerical renormalization group as a DMFT impurity solver. We also compare our findings with previous slave-spin studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solvent-Controlled Branching of Localized versus Delocalized Singlet Exciton States and Equilibration with Charge Transfer in a Structurally Well-Defined Tetracene Dimer

A detailed photophysical picture is elaborated for a structurally well-defined and symmetrical bis-tetracene dimer in solution. The molecule was designed for interrogation of the initial photophysical steps (S 1 → 1 TT) in intramolecular singlet fission (SF). (Triisopropylsilyl)acetylene substituents on the dimer TIPS-BT1 as well as a monomer model TIPS-Tc enable a comparison of photophysical properties, including transient absorption dynamics, as solvent polarity is varied. In nonpolar toluene solutions, TIPS-BT1 decays via radiative and nonradiative pathways to the ground state with no evidence for dynamics related to the initial stages of SF. This contrasts with the behavior of the previously reported unsubstituted dimer BT1 and is likely a consequence of energetic perturbations to the singlet excited-state manifold of TIPS-BT1 by the (trialkylsilyl)acetylene substituents. In polar benzonitrile, two key findings emerge. First, photoexcited TIPS-BT1 shows a bifurcation into both arm-localized (S 1-loc ) and dimer-delocalized (S 1-dim ) singlet exciton states. The S 1-loc decays to the ground state, and weak temperature dependence of its emissive signatures suggests that once it is formed, it is isolated from S 1-dim . Emissive signatures of the S 1-dim state, on the other hand, are strongly temperature-dependent, and transient absorption dynamics show that S1-dim equilibrates with an intramolecular charge-transfer state in 50 ps at room temperature. This equilibrium decays to the ground state with little evidence for formation of long-lived triplets nor 1 TT. These detailed studies spectrally characterize many of the key states in intramolecular SF in this class of dimers but highlight the need to tune electronic coupling and energetics for the S 1 → 1 TT photoreaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploration of the Detailed Conditions for Reductive Stability of Mg(TFSI) 2 in Diglyme: Implications for Multivalent Electrolytes

In this paper, we reveal the general mechanisms of partial reduction of multivalent complex cations in conditions specific for the bulk solvent and in the vicinity of the electrified metal electrode surface and disclose the factors affecting the reductive stability of electrolytes for multivalent electrochemistry. Using a combination of ab initio techniques, we clarify the relation between the reductive stability of contact-ion pairs comprising a multivalent cation and a complex anion, their solvation structures, solvent dynamics, and the electrode overpotential. We found that for ion pairs with multiple configurations of the complex anion and the Mg cation whose available orbitals are partially delocalized over the molecular complex and have antibonding character, the primary factor of the reductive stability is the shape factor of the solvation sphere of the metal cation center and the degree of the convexity of a polyhedron formed by the metal cation and its coordinating atoms. We focused specifically on the details of Mg (II) bis(trifluoromethanesulfonyl)imide in diethylene glycol dimethyl ether (Mg(TFSI) 2 )/diglyme) and its singly charged ion pair, MgTFSI + . In particular, we found that both stable (MgTFSI) + and (MgTFSI) 0 ion pairs have the same TFSI configuration but drastically different solvation structures in the bulk solution. This implies that the MgTFSI/dyglyme reductive stability is ultimately determined by the relative time scale of the solvent dynamics and electron transfer at the Mg–anode interface. In the vicinity of the anode surface, steric factors and hindered solvent dynamics may increase the reductive stability of (MgTFSI) + ion pairs at lower overpotential by reducing the metal cation coordination, in stark contrast to the reduction at high overpotential accompanied by TFSI decomposition. By examining other solute/solvent combinations, we conclude that the electrolytes with highly coordinated Mg cation centers are more prone to reductive instability due to the chemical decomposition of the anion or solvent molecules. Finally, the obtained findings disclose critical factors for stable electrolyte design and show the role of interfacial phenomena in reduction of multivalent ions.

36 MATERIALS SCIENCE↗

B{sub 27}{sup −}: Appearance of the smallest planar boron cluster containing a hexagonal vacancy

Photoelectron spectroscopy and ab initio calculations have been carried out to probe the structures and chemical bonding of the B{sub 27}{sup −} cluster. Comparison between the experimental spectrum and the theoretical results reveals a two-dimensional (2D) global minimum with a triangular lattice containing a tetragonal defect (I) and two low-lying 2D isomers (II and III), each with a hexagonal vacancy. All three 2D isomers have 16 peripheral boron atoms and 11 inner boron atoms. Isomer I is shown to be mainly responsible for the observed photoelectron spectrum with isomers II and III as minor contributors. Chemical bonding analyses of these three isomers show that they all feature 16 localized peripheral B–B σ-bonds. Additionally, isomer I possesses 16 delocalized σ bonds and nine delocalized π bonds, while isomers II and III each contain 17 delocalized σ bonds and eight delocalized π bonds. It is found that the hexagonal vacancy is associated generally with an increase of delocalized σ bonds at the expense of delocalized π bonds in 2D boron clusters. The hexagonal vacancy, characteristic of borophenes, is found to be a general structural feature for mid-sized boron clusters. The current study shows that B{sub 27}{sup −} is the first boron cluster, where a hexagonal vacancy appears among the low-lying isomers accessible experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore-Selective Fullerene Loading in a Porphyrin-Based Metal–Organic Framework Controls Photoinduced Charge-Transfer Dynamics

Building porous donor−acceptor networks based on host−guest interactions in metal organic frameworks (MOFs) provides unique opportunities for tuning charge separation in highly tailorable materials. Here we focus on installing electron-rich porphyrins and electron-deficient fullerene derivatives in the PCN-222 MOF using a solvent assisted ligand insertion (SALI) method. The fullerene is primarily bound in the large pore, where it is subject to distinct dielectric environments through dimethylformamide (DMF) and 1,4-dioxane solvent exchange. Following photoexcitation, sub-picosecond charge transfer involving initial exciplex population is observed, with different charge recombination pathways and lifetimes depending on solvent polarity through modulation of charge-transfer state energies. While the 1,4-dioxane environment yields charge recombination within 1 ns via local fullerene and porphyrin triplet state population, DMF results in charge recombination directly to the ground state on much longer time scales, including some lifetime components in the microsecond range. Fullerene loading influences these kinetics, and the potential for charge delocalization due to fullerene aggregation within the pores is evaluated by using molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hyperbolic exciton polaritons in a van der Waals magnet

Abstract Exciton polaritons are quasiparticles of photons coupled strongly to bound electron-hole pairs, manifesting as an anti-crossing light dispersion near an exciton resonance. Highly anisotropic semiconductors with opposite-signed permittivities along different crystal axes are predicted to host exotic modes inside the anti-crossing called hyperbolic exciton polaritons (HEPs), which confine light subdiffractionally with enhanced density of states. Here, we show observational evidence of steady-state HEPs in the van der Waals magnet chromium sulfide bromide (CrSBr) using a cryogenic near-infrared near-field microscope. At low temperatures, in the magnetically-ordered state, anisotropic exciton resonances sharpen, driving the permittivity negative along one crystal axis and enabling HEP propagation. We characterize HEP momentum and losses in CrSBr, also demonstrating coupling to excitonic sidebands and enhancement by magnetic order: which boosts exciton spectral weight via wavefunction delocalization. Our findings open new pathways to nanoscale manipulation of excitons and light, including routes to magnetic, nonlocal, and quantum polaritonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

1,3-Diphenylisobenzofuran: a Model Chromophore for Singlet Fission

In this review we first provide an introductory description of the singlet fission phenomenon and then describe the ground and electronically excited states of the parent 1,3-diphenylisobenzofuran chromophore (1) and about a dozen of its derivatives. A discussion of singlet fission in thin polycrystalline layers of these materials follows. The highest quantum yield of triplet formation by singlet fission, 200% at 80 K, is found in one of the two known crystal modification of the parent. In the other modification and in many derivatives, excimer formation competes successfully and triplet yields are low. A description of solution photophysics of covalent dimers is described in the next section. Triplet yields are very low, but interesting phenomena are uncovered. One is an observation of a separated-charges (charge-transfer) intermediate in highly polar solvents. The other is an observation of excitation isomerism in both singlet and triplet states, where in one isomer the excitation is delocalized over both halves of the covalent dimer, whereas in the other it is localized on one of the halves. In the last section we present the operation of a simple device illustrating the use of triplets generated by singlet fission for charge separation.

1,3-Diphenylisobenzofuran↗