Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effect measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Irradiation and annealing of p-type silicon carbide

The development of the technology of semiconductor devices based on silicon carbide and the beginning of their industrial manufacture have made increasingly topical studies of the radiation hardness of this material on the one hand and of the proton irradiation to form high-receptivity regions on the other hand. This paper reports on a study of the carrier removal rate (V{sub d}) in p-6H-SiC under irradiation with 8 MeV protons and of the conductivity restoration in radiation- compensated epitaxial layers of various p-type silicon carbide polytypes. V{sub d} was determined by analysis of capacitance-voltage characteristics and from results of Hall effect measurements. It was found that the complete compensation of samples with the initial value of Na - Nd ≈ 1.5 × 10{sup 18} cm{sup −3} occurs at an irradiation dose of ∼1.1 × 10{sup 16} cm{sup −2}. It is shown that specific features of the sublimation layer SiC (compared to CVD layers) are clearly manifested upon the gamma and electron irradiation and are hardly noticeable under the proton and neutron irradiation. It was also found that the radiation-induced compensation of SiC is retained after its annealing at ≤1000°C. The conductivity is almost completely restored at T ≥ 1200°C. This character of annealing of the radiation compensation is independent of a silicon carbide polytype and the starting doping level of the epitaxial layer. The complete annealing temperatures considerably exceed the working temperatures of SiC-based devices. It is shown that the radiation compensation is a promising method in the technology of high-temperature devices based on SiC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cascade phonon-assisted trapping of positrons by divacancies in n-FZ-Si(P) single crystals irradiated with 15 MeV protons

The trapping of positrons by the radiation defects in moderately doped oxygen-lean n-FZ-Si(P) single crystal irradiated with 15 MeV protons has been investigated in a comparative way using the positron lifetime spectroscopy and Hall effect measurements. The experiments were carried out within a wide temperature interval ranging from 25 K – 29 K to 300 K. The positron trapping rate for divacancies was reconstructed in the course of many-stage isochronal annealing. The concentration and the charged states of divacancies (V{sub 2}{sup −} and V{sub 2}{sup −−}) were estimated. The temperature dependency of the trapping cross section of positrons by the negatively charged divacancies is in a good agreement with the data of calculations based on the assumptions of the cascade phonon-assisted mechanism of exchange of the energy between the positron and acoustic long-wave phonons. Obeying ∼ T{sup −3} law, the cross-section of the trapping of positrons by divacancies changes considerably ranging from ∼1.7×10{sup −12} cm{sup 2} (66 – 100 K) to ∼2×10{sup −14} cm{sup 2} (≈ 250 K). The characteristic length of trapping of the positron by V{sub 2}{sup −−} divacancy was estimated to be l{sub 0}(V{sub 2}{sup −−})≈(3.4±0.2)×10{sup −8} cm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Activation and thermal stability of ultra-shallow B{sup +}-implants in Ge

The activation and thermal stability of ultra-shallow B{sup +} implants in crystalline (c-Ge) and preamorphized Ge (PA-Ge) following rapid thermal annealing was investigated using micro Hall effect and ion beam analysis techniques. The residual implanted dose of ultra-shallow B{sup +} implants in Ge was characterized using elastic recoil detection and was determined to correlate well with simulations with a dose loss of 23.2%, 21.4%, and 17.6% due to ion backscattering for 2, 4, and 6 keV implants in Ge, respectively. The electrical activation of ultra-shallow B{sup +} implants at 2, 4, and 6 keV to fluences ranging from 5.0 Multiplication-Sign 10{sup 13} to 5.0 Multiplication-Sign 10{sup 15} cm{sup -2} was studied using micro Hall effect measurements after annealing at 400-600 Degree-Sign C for 60 s. For both c-Ge and PA-Ge, a large fraction of the implanted dose is rendered inactive due to the formation of a presumable B-Ge cluster. The B lattice location in samples annealed at 400 Degree-Sign C for 60 s was characterized by channeling analysis with a 650 keV H{sup +} beam by utilizing the {sup 11}B(p, {alpha})2{alpha} nuclear reaction and confirmed the large fraction of off-lattice B for both c-Ge and PA-Ge. Within the investigated annealing range, no significant change in activation was observed. An increase in the fraction of activated dopant was observed with increasing energy which suggests that the surface proximity and the local point defect environment has a strong impact on B activation in Ge. The results suggest the presence of an inactive B-Ge cluster for ultra-shallow implants in both c-Ge and PA-Ge that remains stable upon annealing for temperatures up to 600 Degree-Sign C.

36 MATERIALS SCIENCE↗

Donor behavior of Sb in ZnO

Electrical behavior of Sb in ZnO:Sb layers doped in a wide concentration range was studied using temperature dependent Hall effect measurements. The layers were grown by plasma-enhanced molecular beam epitaxy, and the Sb concentration was changed by varying the Sb flux, resulting in electron concentrations in the range of 10{sup 16} to nearly 10{sup 20} cm{sup -3}. Upon annealing, the electron concentration increased slightly and more notable was that the electron mobility significantly improved, reaching a room-temperature value of 110 cm{sup 2}/V s and a low-temperature value of 145 cm{sup 2}/V s, close to the maximum of {approx}155 cm{sup 2}/V s set by ionized impurity scattering. Hall data and structural data suggest that Sb predominantly occupies Zn sublattice positions and acts as a shallow donor in the whole concentration range studied. In the layers with high Sb content ({approx}1 at. %), acceptor-type compensating defects (possibly Sb on oxygen sites and/or point-defect complexes involving Sb{sub O}) are formed. The increase of electron concentration with increasing oxygen pressure and the increase in ZnO:Sb lattice parameter at high Sb concentrations suggest that acceptors involving Sb{sub O} rather than Sb{sub Zn}-2V{sub Zn} complexes are responsible for the compensation of the donors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deep traps in GaAs/InGaAs quantum wells and quantum dots, studied by noise spectroscopy

Remotely doped In{sub 0.35}Ga{sub 0.65}As layers of different coverages 6, 9, 11, and 13 ML were grown by molecular beam epitaxy on (100) GaAs. Quantum dot (QD) nucleation was observed in situ by reflection high-energy electron diffraction at 8 ML growth of In{sub 0.35}Ga{sub 0.65}As, while for 6 ML, only two-dimensional (2D) growth was observed. Atomic force microscopy, low temperature photoluminescence, and Hall effect measurements confirmed this transition from 2D to three-dimensional growth. Low-frequency noise studies have been performed to probe defects in such heterostructures throughout the transition from a highly strained quantum well to QDs. Results were compared to a bulk n-type GaAs reference sample. We revealed three main defects in GaAs with activation energies of 0.8, 0.54, and 0.35 eV. These defects with the same activation energies were found in all samples. However, structures containing In{sub 0.35}Ga{sub 0.65}As QDs show an additional peak at low temperatures due to the presence of defects which are not observed for reference GaAs and quantum well samples. Detailed analysis shows that for 9 and 11 ML In{sub 0.35}Ga{sub 0.65}As QD samples this peak corresponds to the well known M1 defect in GaAs with an activation energy of 0.18 eV, while for a coverage of 13 ML the defect was found to have an activation energy of 0.12 eV. All defects were characterized quantitatively in terms of their activation energy, capture cross section, and density. These studies indicate that noise spectroscopy is a very sensitive tool for electronic material characterization on the nanoscale.

36 MATERIALS SCIENCE↗

Development of a Technical Standard for Radiological Characterization of DAW - 19552

Since the Manhattan Project, the U.S. Department of Energy (DOE) and its predecessor agencies have performed a wide mission involving nuclear materials and weapons development, production, testing, and modernization. While the initial mission components relied heavily upon reactor physics and chemistry, the environmental programs have increasingly relied upon development of more accurate and effective measurement methodologies to determine the radiological and chemical properties of the unique waste streams that were generated during the weapons production and testing mission. During the ongoing site cleanup program, the DOE laboratories and former production sites have developed a wide range of site-specific processes and procedures for conducting radiological characterization of dry active waste (DAW) that is managed as low-level radioactive waste. This has resulted in a Complex-wide variability among sites with respect to the methodologies and instrumentation used to characterize individual waste streams. The DAW-type waste was selected for development of a characterization standard since it is a simple, voluminous, and repetitive waste stream with a substantial knowledge base, established experience history at multiple site locations, and the potential for realization of programmatic benefits though standardization. Implementation of a consistent, standardized approach to DAW characterization will take advantage of multiple applications for a technology that is both mature and stable. The DAW characterization process is repetitive and lends itself to implementation at a wide range of operating locations - resulting in economies of scale, compliance with regulatory requirements, and consistent implementation of procedures which support design, operations, maintenance, and management of facilities, activities and environmental restoration programs. In response to a request from DOE, the Energy Facility Contractors Group (EFCOG) Waste Management Working Group (WMWG) is supporting the development of a new DOE Technical Standard for Radiological Characterization of DAW. The purpose of the proposed new standard is to provide a technical resource that integrates and enhances the utilization of current site-specific methodologies and processes. An EFCOG/WMWG technical team has prepared a Technical Basis Document (TBD) to support the development and utilization of the new standard. The TBD provides detailed reference information for use by site personnel when implementing the guidance to be provided in the standard. It also provides the rationale for and details concerning the recommended technical approaches for radiological characterization of representative DAW-type waste streams. The TBD is an essential resource and will be included as an appendix to the proposed standard. Formulation of the new standard will draw upon the information contained in the TBD in order to integrate and improve the utilization of current site-specific methodologies and processes. It will also include a comparison of current radiological characterization methodologies to determine which ones are most reliable and effective in producing relevant and valid data. In view of the long history and participation by several agencies in the regulation of nuclear programs, existing Voluntary Consensus Standards have also been identified in the TBD and will be referenced for relevancy and applicability to the new proposed standard. A Project Justification Statement (PJS) was also developed by the EFCOG/WMWG Team. Following internal Team review and approval by EFCOG, the draft PJS was submitted through Argonne National Laboratory (ANL) and the DOE Argonne Site Office Technical Standards Managers for review and approval by the DOE Argonne Site Office Manager. After resolution of comments and approval by the Manager, the PJS will be submitted to the DOE/HQ Technical Standards Program Manager (TSPM) for formal coordination. Following resolution of technical comments received during the PJS coordination process and receipt of a technical standards project number assigned by the TSPM, the Team will confirm the overall preparation schedule and develop an Internal Draft Technical Standard for coordination with the DOE Argonne Site Office. Following comment resolution, the Team will then prepare a Coordination Draft for submittal to the DOE Technical Standards RevCom review process and will respond to comments generated during this Complex-wide review. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dodecaborane‐Based Dopants Designed to Shield Anion Electrostatics Lead to Increased Carrier Mobility in a Doped Conjugated Polymer

Abstract One of the most effective ways to tune the electronic properties of conjugated polymers is to dope them with small‐molecule oxidizing agents, creating holes on the polymer and molecular anions. Undesirably, strong electrostatic attraction from the anions of most dopants localizes the holes created on the polymer, reducing their mobility. Here, a new strategy utilizing a substituted boron cluster as a molecular dopant for conjugated polymers is employed. By designing the cluster to have a high redox potential and steric protection of the core‐localized electron density, highly delocalized polarons with mobilities equivalent to films doped with no anions present are obtained. AC Hall effect measurements show that P3HT films doped with these boron clusters have conductivities and polaron mobilities roughly an order of magnitude higher than films doped with F 4 TCNQ, even though the boron‐cluster‐doped films have poor crystallinity. Moreover, the number of free carriers approximately matches the number of boron clusters, yielding a doping efficiency of ≈100%. These results suggest that shielding the polaron from the anion is a critically important aspect for producing high carrier mobility, and that the high polymer crystallinity required with dopants such as F 4 TCNQ is primarily to keep the counterions far from the polymer backbone.

Aubry, Taylor J.↗

Inert Gas Element as Active Infrared‐Absorption Source and Donor in Silicon for Forbidden‐Wavelength Sensing

Intrinsic silicon (Si) is forbidden for infrared (IR) sensing at the communication wavelength like 1.31 or 1.55 µm due to the well‐known bandgap limitation. In this work, an unexpected physical picture of using argon (Ar) is identified, which is usually inert to the surrounding chemical environment and used as a protective agent in semiconductor processing, to overcome the IR‐sensing‐forbidden problem in Si. Here, in this work, it is shown by an analysis of a dynamic secondary ion mass spectrometer that such a Si, when exposed to laser pulse in Ar gas, can contain a very high dose of Ar up to 10 20 cm −3 even after 1300 days. First‐principles calculations, molecular dynamics, and Hall effect measurements reveal that, due to both steric and dynamic repulsions by Ar orbitals to Si dangling bonds, the Ar‐filled‐vacancy produces a much wider defect band inside the gap, which is not only responsible for strong infrared absorption, but also causes a significant increase in n‐type conductivity, both in line with experiments. The study proves that originally inert elements in fact can act as active impurities in semiconductors for advanced applications, which updates the current knowledge of defect physics.

36 MATERIALS SCIENCE↗

Quantifying the Influence of Covalent Metal‐Ligand Bonding on Differing Reactivity of Trivalent Uranium and Lanthanide Complexes

Abstract Qualitative differences in the reactivity of trivalent lanthanide and actinide complexes have long been attributed to differences in covalent metal‐ligand bonding, but there are few examples where thermodynamic aspects of this relationship have been quantified, especially with U 3+ and in the absence of competing variables. Here we report a series of dimeric phosphinodiboranate complexes with trivalent f ‐metals that show how shorter‐than‐expected U−B distances indicative of increased covalency give rise to measurable differences in solution deoligomerization reactivity when compared to isostructural complexes with similarly sized lanthanides. These results, which are in excellent agreement with supporting DFT and QTAIM calculations, afford rare experimental evidence concerning the measured effect of variations in metal‐ligand covalency on the reactivity of trivalent uranium and lanthanide complexes.

Fetrow, Taylor V.↗

Quantifying the Influence of Covalent Metal‐Ligand Bonding on Differing Reactivity of Trivalent Uranium and Lanthanide Complexes

Abstract Qualitative differences in the reactivity of trivalent lanthanide and actinide complexes have long been attributed to differences in covalent metal‐ligand bonding, but there are few examples where thermodynamic aspects of this relationship have been quantified, especially with U 3+ and in the absence of competing variables. Here we report a series of dimeric phosphinodiboranate complexes with trivalent f ‐metals that show how shorter‐than‐expected U−B distances indicative of increased covalency give rise to measurable differences in solution deoligomerization reactivity when compared to isostructural complexes with similarly sized lanthanides. These results, which are in excellent agreement with supporting DFT and QTAIM calculations, afford rare experimental evidence concerning the measured effect of variations in metal‐ligand covalency on the reactivity of trivalent uranium and lanthanide complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fungal colonization of plant roots is resistant to nitrogen addition and resilient to dominant species losses

Abstract Global change drivers, such as nitrogen (N) deposition and non‐random species extinctions, may shift interactions among aboveground and belowground communities. However, tightly coupled interactions between aboveground and belowground organisms may buffer ecosystems to global change. Here, we test how four years of organic and inorganic N addition and removal of a dominant plant species, Festuca thurberi , independently and interactively influences fungal colonization patterns and performance in a co‐dominant plant species, Helianthella quinquenervis . Surprisingly, we found N addition and Festuca removal had no measurable effects on the colonization of arbuscular mycorrhizal fungi (AMF) and dark septate endophyte ( DSE ) or the performance of Helianthella seedlings grown with field‐collected inoculum in a companion greenhouse experiment. However, the proximity of Helianthella to Festuca predicted fungal colonization: DSE colonization decreased by 1% for each cm of distance Helianthella was from Festuca , although the differences in fungal inoculum potential had no effect on Helianthella seedling survival or biomass. Our results suggest that plant–fungal interactions can be resistant to N addition and resilient to the loss of dominant plant species. Additionally, our results suggest that soil legacies, mediated through surviving symbiont communities or changes in soil properties, can shape ecosystem resistance and resilience to disturbance and perturbations.

54 ENVIRONMENTAL SCIENCES↗

Using ordination and clustering techniques to assess multi-metric fish health response following a coal fly ash spill

The effect of coal ash exposure on fish health in freshwater communities is largely unknown. Given the large number of possible pathways of effects (e.g., toxicological effect of exposure to multiple metals, physical effects from ash exposure, and food web effects), measurement of only a few health metrics is not likely to give a complete picture. The authors measured a suite of 20 health metrics from 1100+ fish collected from 5 sites (3 affected and 2 reference) near a coal ash spill in east Tennessee over a 4.5-yr period. The metrics represented a wide range of physiological and energetic responses and were evaluated simultaneously using 2 multivariate techniques. Results from both hierarchical clustering and canonical discriminant analyses suggested that for most speciesXseason combinations, the suite of fish health indicators varied more among years than between spill and reference sites within a year. In a few cases, spill sites from early years in the investigation stood alone or clustered together separate from reference sites and later year spill sites. Outlier groups of fish with relatively unique health profiles were most often from spill sites, suggesting that some response to the ash exposure may have occurred. Results from the 2 multivariate methods suggest that any change in the health status of fish at the spill sites was small and appears to have diminished since the first 2 to 3 yr after the spill.

54 ENVIRONMENTAL SCIENCES↗

International Projects Proposal Analysis: Risk Assessment Using Radial Maps

International projects are very attractive to companies seeking to expand their business horizons, and collaborative networks of international partners have created new work environments that differ from the conventional business structures of the past. This study provides scholarly research into the risks that inherently affect an international project's success and provides insight into the effective measures that project managers may employ to assist in analyzing and mitigating these multinational risks during the bid and proposal process. A new method of radial risk mapping assists management in graphing their risk findings to aid in their proposal analysis. These graphical representations provide firms seeking international markets with a method for selecting those projects with the least risk, thereby increasing their chances of success and maximum profit.

Steffey, R Wayne↗

Unusual Ferromagnetic Band Evolution and High Curie Temperature in Monolayer 1T‐CrTe2 on Bilayer Graphene

2D van der Waals ferromagnets hold immense promise for spintronic applications due to their controllability and versatility. Despite their significance, the realization and in-depth characterization of ferromagnetic materials in atomically thin single layers, close to the true 2D limit, has been scarce. Here, a successful synthesis of monolayer (ML) 1T-CrTe2 is reported on a bilayer graphene (BLG) substrate via molecular beam epitaxy. Using angle-resolved photoemission spectroscopy and magneto-optical Kerr effect measurements, that the ferromagnetic transition is observed at the Curie temperature (TC) of 150 K in ML 1T-CrTe2 on BLG, accompanied by unconventional temperature-dependent band evolutions. The spectroscopic analysis and first-principle calculations reveal that the ferromagnetism may arise from Goodenough-Kanamori super-exchange and double-exchange interactions, enhanced by the lattice distortion and the electron doping from the BLG substrate. These findings provide pivotal insight into the fundamental understanding of mechanisms governing 2D ferromagnetism and offer a pathway for engineering higher TC in 2D materials for future spintronic devices.

Park, Kyoungree↗

Twin-Slot Antenna-Coupled Superconducting Ti Transition-Edge Sensor at 350 GHz

We have developed four-leg-supported superconducting Ti transition-edge sensors (TES) formed by KOH wet etching. Energy relaxation mechanism is changed from electron–phonon coupling to diffusive phonon after wet etching. The current–voltage curves of the same TES device were measured before and after wet etching. After wet etching, its thermal conductance (G) is reduced to 500 pW/K from 8950 pW/K. The measured effective response time (τ{sub eff}) is 143 μs, about 30 times larger. In addition, we have studied the optical noise equivalent power (NEP) with a cryogenic blackbody in combination with metal-mesh filters to define the radiation bandwidth. The obtained optical NEP is 5 × 10{sup −16} W/√Hz, which is suitable for ground-based astronomical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of Room-Temperature Ferromagnetism in Nanocomposite CdO Codoped with Al and Gd: Treatment in Hydrogen Atmosphere

Cadmium oxide codoped with Al and Gd ion powders was synthesised by thermal codecomposition of a mixture of complexes of cadmium acetate dihydrate, gadolinium acetate hydrate, and aluminum nitrate nonahydrate. The mass ratio of Al/Cd was fixed while the mass ratio of Gd/Cd varied systematically. The purpose of the present study is to synthesise and study the transparent conducting oxide (TCO) CdO powder having room-temperature ferromagnetic (RT-FM) properties. To realize that purpose, the synthesised Al/Gd-codoped CdO powder was annealed under hydrogen gas with certain conditions. The X-ray diffraction (XRD) method confirmed the formation of a single nanocrystalline structure; thus, both Al/Gd ions were incorporated into CdO lattice forming solid solutions. Magnetic measurements revealed that some of the doped CdO powders gained paramagnetic (PM) properties where the susceptibility increases with increasing dopant Gd content; the measured effective magnetic moment of dopant Gd{sup 3+} was around 8 μ{sub B}. Furthermore, the magnetic energy of the created RT-FM of the codoped CdO samples by hydrogenation was found to be dependent on the Gd% doping level. For hydrogenated CdO powder doped with 3% Gd, the coercivity (H{sub c}) was 195.9 Oe, the remanence (M{sub r}) was 0.77 memu/g, the saturation magnetisation (M{sub s}) was 5.05 memu/g, and the energy product (U{sub m}) was 150.6 merg/g. Thus, the possibility of production of TCO CdO with RT-FM, where magnetic characteristics can be tailored by doping and post treatment under H{sub 2} gas, was proven. Thus, a new potential candidate to be used as a dilute magnetic semiconductor (DMS) was successfully synthesised.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Patchy silica-coated silver nanowires as SERS substrates

We report a class of core-shell nanomaterials that can be used as efficient surface-enhancement Raman scattering (SERS) substrates. The core consists of silver nanowires, prepared through a chemical reduction process, that are used to capture 4- mercaptobenzoic acid (4-MBA), a model analyte. The shell was prepared through a modified Stöber method and consists of patchy or full silica coats. The formation of silica coats was monitored via transmission electron microscopy, UV-visible spectroscopy and phase-analysis light scattering for measuring effective surface charge. Surprisingly, the patchy silica coated silver nanowires are better SERS substrate than silver nanowires; nanomolar concentration of 4-MBA can be detected. In addition, “nano-matryoshka” configurations were used to quantitate/explore the effect of the electromagnetic field at the tips of the nanowire (“hot spots”) in the Raman scattering experiment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗