Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Parameterization of Vegetation Aerodynamic Roughness of Natural Regions Satellite Imagery

Parameterizations of the frontal area index and canopy area index of natural or randomly distributed plants are developed, and applied to the estimation of local aerodynamic roughness using satellite imagery. The formulas are expressed in terms of the subpixel fractional vegetation cover and one non-dimensional geometric parameter that characterizes the plant's shape. Geometrically similar plants and Poisson distributed plant centers are assumed. An appropriate averaging technique to extend satellite pixel-scale estimates to larger scales is provided. The parameterization is applied to the estimation of aerodynamic roughness using satellite imagery for a 2.3 sq km coniferous portion of the Landes Forest near Lubbon, France, during the 1986 HAPEX-Mobilhy Experiment. The canopy area index is estimated first for each pixel in the scene based on previous estimates of fractional cover obtained using Landsat Thematic Mapper imagery. Next, the results are incorporated into Raupach's (1992, 1994) analytical formulas for momentum roughness and zero-plane displacement height. The estimates compare reasonably well to reference values determined from measurements taken during the experiment and to published literature values. The approach offers the potential for estimating regionally variable, vegetation aerodynamic roughness lengths over natural regions using satellite imagery when there exists only limited knowledge of the vegetated surface.

Jasinski, Michael F.↗
NASA NTRS2004

Uncertainties in estimates of the risks of late effects from space radiation

Methods used to project risks in low-Earth orbit are of questionable merit for exploration missions because of the limited radiobiology data and knowledge of galactic cosmic ray (GCR) heavy ions, which causes estimates of the risk of late effects to be highly uncertain. Risk projections involve a product of many biological and physical factors, each of which has a differential range of uncertainty due to lack of data and knowledge. Using the linear-additivity model for radiation risks, we use Monte-Carlo sampling from subjective uncertainty distributions in each factor to obtain an estimate of the overall uncertainty in risk projections. The resulting methodology is applied to several human space exploration mission scenarios including a deep space outpost and Mars missions of duration of 360, 660, and 1000 days. The major results are the quantification of the uncertainties in current risk estimates, the identification of factors that dominate risk projection uncertainties, and the development of a method to quantify candidate approaches to reduce uncertainties or mitigate risks. The large uncertainties in GCR risk projections lead to probability distributions of risk that mask any potential risk reduction using the "optimization" of shielding materials or configurations. In contrast, the design of shielding optimization approaches for solar particle events and trapped protons can be made at this time and promising technologies can be shown to have merit using our approach. The methods used also make it possible to express risk management objectives in terms of quantitative metrics, e.g., the number of days in space without exceeding a given risk level within well-defined confidence limits. Published by Elsevier Ltd on behalf of COSPAR.

Non-NASA Center↗
NASA NTRS2004

Gas-liquid Phase Distribution and Void Fraction Measurements Using the MRI

We used a permanent-magnet MRI system to estimate the integral and spatially- and/or temporally-resolved void-fraction distributions and flow patterns in gas-liquid two-phase flows. Air was introduced at the bottom of the stagnant liquid column using an accurate and programmable syringe pump. Air flow rates were varied between 1 and 200 ml/min. The cylindrical non-conducting test tube in which two-phase flow was measured was placed in a 2.67 kGauss MRI with MRT spectrometer/imager. Roughly linear relationship has been obtained for the integral void-fraction, obtained by volume-averaging of the spatially-resolved signals, and the air flow rate in upward direction. The time-averaged spatially-resolved void fraction has also been obtained for the quasi-steady flow of air in a stagnant liquid column. No great accuracy is claimed as this was an exploratory proof-of-concept type of experiment. Preliminary results show that MRI a non-invasive and non-intrusive experimental technique can indeed provide a wealth of different qualitative and quantitative data and is especially well suited for averaged transport processes in adiabatic and diabatic multi-phase and/or multi-component flows.

Daidzic, N. E.↗
NASA NTRS1986

An information measure for class discrimination

This article describes a separability measure for class discrimination. This measure is based on the Fisher information measure for estimating the mixing proportion of two classes. The Fisher information measure not only provides a means to assess quantitatively the information content in the features for separating classes, but also gives the lower bound for the variance of any unbiased estimate of the mixing proportion based on observations of the features. Unlike most commonly used separability measures, this measure is not dependent on the form of the probability distribution of the features and does not imply a specific estimation procedure. This is important because the probability distribution function that describes the data for a given class does not have simple analytic forms, such as a Gaussian. Results of applying this measure to compare the information content provided by three Landsat-derived feature vectors for the purpose of separating small grains from other crops are presented.

Shen, S. S.↗
NASA NTRS1971

The application of signal detection theory to optics

The restoration of images focused on a photosensitive surface is treated from the standpoint of maximum likelihood estimation, taking into account the Poisson distributions of the observed data, which are the numbers of photoelectrons from various elements of the surface. A detector of an image focused on such a surface utilizes a certain linear combination of those numbers as the optimum detection statistic. Methods for calculating the false alarm and detection probabilities are proposed. It is shown that measuring noncommuting observables in an ideal quantum receiver cannot yield a lower Bayes cost than that attainable by a system measuring only commuting observables.

Helstrom, C. W.↗
NASA NTRS1973

Studies relating to temperature control of a large scale telescope

Analytical methods are developed for estimating the circumferential and longitudinal temperature distributions in a large space telescope, idealized as a simple insulated tube with a flat mirror across one end. The effects of wall conduction, multilayer insulation, thermal coatings, heat pipes, and heated collars are analyzed, with numerical examples. For most of the study, the only thermal input to the tube was assumed to be from steady solar irradiation from one side, as in a geosynchronous orbit. Unsteady heat flow through the insulation, as in alternating sunlight and shadow of a low orbit, is briefly discussed.

Katzoff, S.↗
NASA NTRS1973

Mechanisms for Mars dust storms.

Characteristics of the Mars global dust storm are reviewed. At the Mariner 9 encounter, the dust consisted of highly absorbing particles distributed rather uniformly up to great height (about 50 km). These observations together with temperature distributions inferred from the Mariner 9 IRIS by Hanel et al. (1972) are used to estimate global wind systems during the dust storm. The global distribution and direction of light surface streaks indicate that the axisymmetric circulation was a dominant part of flow during the dust storm. The axisymmetric winds may become strong enough to raise dust over wide areas of Mars' tropics under unusual conditions: the incoming solar radiation must be near its seasonal maximum, the static stability must be low, and the atmosphere must be able to absorb and re-emit a sizeable fraction of the incoming radiation. Strong winds around the periphery of the retreating south polar cap would be driven by the temperature gradient at the cap edge and by the mass outflow due to subliming CO2. These polar winds could generate local dust storms, raising the general level of dustiness, and providing the conditions necessary for onset of a global dust storm.

Leovy, C. B.↗
NASA NTRS1973

Helium in the topside Venus ionosphere.

The amount of helium in the Venus atmosphere can be estimated from an examination of the measured ionization profiles and from the recent discovery of radioactive materials in the Venus crust. The amount necessary to give agreement between computed and experimental results is approximately 400,000,000 per cu cm at 140 km. When a nominal value of the eddy diffusion coefficient of 1,000,000 sq cm per sec is used, the atmospheric helium mixing ratio is found to be 0.00006, nearly ten times that for the earth. If agreement is required between the helium mixing ratio estimated from an earth-like distribution of crustal radioactive materials and from the measured ionization profile, the required eddy diffusion coefficient would be 5,000,000 sq cm per sec.

Herman, J. R.↗
NASA NTRS1974

Estimate of heat fluxes on the subjacent surface (according to data from synoptic analysis)

Several methods of estimating heat fluxes from nonadiabatic sources distributed over a subjacent surface were discussed. Data calculated by synoptic analysis for the entire Northern Hemisphere from aerological soundings at the AT500 and AT400 level, along with the temperature of the subjacent surfaces, were used. A polytropic model of the atmosphere is used in order to avoid the problems posed by the lack of any complete theory of heat transfer in the lower atmosphere.

Nagurnyy, A. P.↗
NASA NTRS1976

Nationwide assessment of potential output from wind-powered generators

A method for computing the actual expected power for a wind-powered generator from a given observed speed distribution is described and applied to estimate the potential output for different locations in the continental U.S. A contour map of generator capacity factor values (fraction of the rated output realizable) is obtained for wind-powered generator systems with a cut-in speed of 3.6 m/sec and a rated speed of 8.0 m/sec, and for a unit with hypothetical values for the 1 MW class (cut-in speed, 6.7 m/sec; rated speed, 13.4 m/sec). Results indicate that in the central U.S. and in certain areas of the New England coast at a height of 61 m, over 60% of the rated output power could be obtained on an annual average. In these areas capacity factors of over 20% could be obtained with the 1MW system.

Justus, C. G.↗
NASA NTRS1977

Analysis of satellite derived winds for April 24, 1975

Cumulus cloud tracking based on short-interval GOES satellite imagery provided a representation of the low-level wind fields existing prior to the outbreak of severe thunderstorms. Through use of the satellite-derived winds and surface mixing ratios, moisture convergence fields were estimated. The effect of the spatial distribution of trackable clouds on the computed dynamic fields was also investigated.

Maddox, R. A.↗
NASA NTRS1980

Cycles till failure of silver-zinc cells with completing failures modes: Preliminary data analysis

One hundred and twenty nine cells were run through charge-discharge cycles until failure. The experiment design was a variant of a central composite factorial in five factors. Preliminary data analysis consisted of response surface estimation of life. Batteries fail under two basic modes; a low voltage condition and an internal shorting condition. A competing failure modes analysis using maximum likelihood estimation for the extreme value life distribution was performed. Extensive diagnostics such as residual plotting and probability plotting were employed to verify data quality and choice of model.

Sidik, S. M.↗
NASA NTRS1980

Emission measures derived from far ultraviolet spectra of T Tauri stars

Spectroscopic diagnostics based on UV emission line observations have been developed to study the solar chromosphere, transition region, and corona. The atmospheric properties that can be inferred from observations of total line intensities include the temperature, by identifying the ionic species present; the temperature distribution of the emission measure, from the absolute intensities; and the electron density of the source, from line intensity ratios sensitive to the electron density. In the present paper, the temperature distribution of the emission measure is estimated from observations of far UV emission line fluxes of the T Tauri stars, RW Aurigae and RU Lupi, made on the IUE. A crude estimate of the electron density of one star is obtained, using density-sensitive line ratios.

Cram, L. E.↗
NASA NTRS1980

Cycles till failure of silver-zinc cells with competing failure modes - Preliminary data analysis

The data analysis of cycles to failure of silver-zinc electrochemical cells with competing failure modes is presented. The test ran 129 cells through charge-discharge cycles until failure; preliminary data analysis consisted of response surface estimate of life. Batteries fail through low voltage condition and an internal shorting condition; a competing failure modes analysis was made using maximum likelihood estimation for the extreme value life distribution. Extensive residual plotting and probability plotting were used to verify data quality and selection of model.

Sidik, S. M.↗
NASA NTRS1981

Calculation of atmospheric loss from microwave radiometric noise temperature measurements

Microwave propagation loss in the atmosphere can be inferred from microwave radiometric noise temperature measurements. The relevant equations are given and a derivation and calculation is made assuming various physical models. Comparison is made with the commonly used lumped element atmospheric model (isothermal and uniform loss) and the model with linear temperature and exponential loss distributions. The results are useful for estimating the integral inversion differences due to the model selection. This indicates that the commonly used lumped element atmospheric model is a very good approximation with judicious choice of the effective physical temperature. For the worst case comparison, the lumped element model agrees with the variable parameter model within 0.2 dB up to a propagation loss of 3 dB.

Stelzried, C.↗
NASA NTRS1980

Thermal radiation in Arctic stratus clouds

Infrared radiative properties of Arctic stratus clouds in the 10.1-12.7 micron wavelength region are determined from a series of aircraft measurements. The average emissivity of the clouds when scattering is neglected is unity for cloud depths greater than 350 m. Under the assumption that the cloud layers are homogeneous the cloud droplet volume absorption coefficient is estimated as 17 + or - 5 per km. Several mass absorption coefficients are estimated for several assumed liquid water distributions. It is also concluded that the cloud reflectance is not larger than 2 (+ or - 5%).

Herman, G. F.↗
NASA NTRS1980

Atmospheric correction of Nimbus-7 Coastal Zone Color Scanner imagery

The Coastal Zone Color Scanner (CZCS) on Nimbus-7 is a scanning radiometer designed to view the ocean in six spectral bands (centered at 443, 520, 550, 670, 750, and 11,500 nm) for the purpose of estimating sea surface chlorophyll and temperature distributions. In the visible bands, the atmosphere obscures the imagery to the extent that at 443 nm, at most, only 20 percent of the observed radiance originates from beneath the sea surface. Retrieving this subsurface radiance from the imagery is complicated by the highly variable nature of the aerosol's contribution. In this paper, an algorithm for the removal of these atmospheric effects from CZCS imagery is described, a preliminary application of the algorithm to an image with very strong horizontal variations in the aerosol optical thickness is presented, and retrieval of the spatial distribution of the aerosol optical thickness is discussed.

Gordon, H. R.↗