Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion couples”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Kinetically Dormant Ni‐Rich Layered Cathode During High‐Voltage Operation

Abstract The degradation of Ni‐rich cathodes during long‐term operation at high voltage has garnered significant attention from both academia and industry. Despite many post‐mortem qualitative structural analyses, precise quantification of their individual and coupling contributions to the overall capacity degradation remains challenging. Here, by leveraging multiscale synchrotron X‐ray probes, electron microscopy, and post‐galvanostatic intermittent titration technique, the thermodynamically irreversible and kinetically reversible capacity loss is successfully deconvoluted in a polycrystalline LiNi 0.83 Mn 0.1 Co 0.07 O 2 cathode during long‐term charge/discharge cycling in full cell configuration. Contradicting the dramatic capacity loss, the layered structure remains highly alive even after 1000 cycles at 4.6 V while undergoing a three‐order of magnitude reduction in the mass transfer kinetics, leading to almost fully recoverable capacity under kinetic‐free conditions. Such kinetic dormant behavior after cycling is not simply ascribed to poor chemical diffusion by reconstructed cathode surface but highly synchronizes with the lattice strain evolution stemming from the structural heterogeneity between deeply delithiated layered and degraded rock‐salt phases at high voltage. These findings deepen the degradation mechanism of high‐voltage cathodes to achieve long‐cycling and fast‐charging performance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

LaCeO x coupled N-doped graphene/Ru single-atoms as a binary-site catalyst for efficient hydrogen evolution based on hydrogen spillover

Based on the hydrogen spillover effect, versatile binary-site catalysts are promising for the alkaline hydrogen evolution reaction (HER). In which one site can adsorb and dissociate water, while the neighboring site is favorable for liberating hydrogen. Inspired by these possibilities, oxygen vacancy (O v )-rich LaCeO x coupled N-doped graphene/Ru single-atoms (LaCeO x @NGr/Ru 1 ) was synthesized as an efficient dual-site HER catalyst. It delivered an impressive low overpotential of 22 mV at a current density of 10mAcm –2 and a slight Tafel slope of 40 mV dec –1 in an alkaline medium, outstanding the advanced Ru-based catalysts. Moreover, this promising binary-component catalyst exhibited higher mass activity and longer lasting durability than commercial Pt/C catalyst (20 wt%). Finally, experimental and theoretical investigations provided insights into the HER mechanisms of LaCeO x @NGr/Ru 1 based on three indispensable steps: water adsorption and dissociation on O v -rich LaCeO x , diffusion of generated H* species towards Ce 3+ -N-Ru 1 bridges, and hydrogen evolution on Ru 1 sites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental and numerical study of the effects of solution concentration and temperature on concrete under external sulfate attack

The work reports on an experimental programme, conducted to validate comprehensively our previously proposed coupled chemo-transport model for external sulfate attack on concrete. Specifically, the effects of the concentration of sulfate solution and temperature on the distribution of sulfate ions in concrete are experimentally investigated and used to demonstrate the accuracy of the modeling framework. Further, the profile of aluminate depletion and the leaching depth numerically are investigated. For all cases the model predictions are in good agreement with the experimental results, showing increases of the concentration of sulfate ions in concrete with higher concentrations of sulfate solution and higher temperatures. It is concluded that higher sulfate solution concentration and temperature enhance the processes involved in the external sulfate attack on concrete, namely diffusion of sulfate ions and their chemical reactions with concrete. It is found that these parameters affect the external sulfate attack predominantly via the chemical reaction process.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Using Strain in the Vadose Zone During Sinusoidal-Rate Well Tests to Characterize an Aquifer

Well tests with sinusoidal variation in pumping rate are appealing because of the ability to filter competing signals and they also can be set up with no net removal of water, which is an advantage at contaminated sites. Current methods of interpreting sinusoidal-rate well tests analyze the phase lag and amplitude of pressure signals in the aquifer. This approach is restricted by the availability of monitoring wells. An alternative approach could be to measure the stain in the vadose zone instead of pressure in the aquifer. The goal of this research is to evaluate the feasibility of using signals from in-situ sensors in the vadose zone to characterize sinusoidal-rate well tests. Well tests with a variety of periods and amplitudes were performed using a well completed in an unconfined saprolite aquifer with a water table at 9m depth at our test site near Clemson, South Carolina. Vertical strain was measured every meter between 1 to 7 m using a distributed optical fiber sensing technique called coherence length gated microwave photonics interferometry (CMPI). A novel packaging system was designed to couple the optical fiber to the saprolite. The results show that strain measured in the vadose zone during sinusoidal-rate pumping varies periodically with amplitudes from 0.1 to 3 microstrain, depending on the amplitude of the sinusoidal pumping rate. Hydraulic heads at similar radial distances were also periodic with changing amplitudes ranging up to ±0.2 meters. The strain in the vadose zone responds to pressure in the underlying aquifer—the strain is tensile when the pressure is falling, and compressive when the pressure is rising. The phase lag between the pumping rate and the strain was 3 min with a pumping period of 15 minutes, and this gives a hydraulic diffusivity of 0.06 m2/s. This is the same diffusivity obtained by analyzing a constant rate pumping test, and it is slightly larger than the diffusivity (0.044 m2/s) obtained by analyzing the phase lag of the pressure in a nearby monitoring well. Strain measurements in the vadose zone could be made with much less cost and effort than installing a deep monitoring well. These results suggest that strain measurements in the vadose zone could be used to supplement monitoring wells, thereby increasing the resolution, and reducing costs of analyzing well tests.

well test, sinusoidal, periodic pumping, strain↗
DOE OSTI2023

Thermalization at low temperatures via weakly damped multisite baths

We study the thermalization properties of one-dimensional open quantum systems coupled to baths at their boundary. The baths are driven to their thermal states via Lindblad operators, while the system undergoes Hamiltonian dynamics. We specifically consider multisite baths and investigate the extent to which the late-time steady state resembles a Gibbs state at some controllable temperature set by the baths. We study three models: a noninteracting fermion model accessible via free-fermion technology, and two interacting models, the XZ model and the chiral clock model, which are accessible via tensor network methods. We show that, by tuning towards the weak coupling and slow relaxation limits, one can engineer low temperatures in the bulk of the system provided the bath size is big enough. Here, we use this capability to study energy transport in the XZ model at lower temperatures than previously reported. Our work paves the way for future studies of interacting open quantum systems at low temperatures.

1-dimensional spin chains↗
DOE OSTI2024

A Free-Standing Boron-Doped Diamond Grid Electrode for Fundamental Spectroelectrochemistry

Spectroelectrochemistry (SEC) is a powerful technique that enables a variety of redox properties to be studied, including formal potential (E o ), thermodynamic values (ΔG, ΔH, ΔS), diffusion coefficient (D), electron transfer stoichiometry (n), and others. SEC requires an electrode which light can pass through while maintaining sufficient electrical conductivity. This has been traditionally composed of metal or metal oxide films atop transparent substrates like glass, quartz, or metallic mesh. Robust electrode materials like boron-doped diamond (BDD) could help expand the environments in which SEC can be performed, but most designs are limited to thin films (~100–200 nm) on transparent substrates less resilient than free-standing BDD. Here, this work presents a free-standing BDD grid electrode (G-BDD) for fundamental SEC measurements, using the well-characterized Fe(CN) 6 3–/4– redox couple as proof-of-concept. With a combination of cyclic voltammetry (CV), thin-layer SEC, and chronoabsorptometry, several of the redox properties mentioned above were calculated and compared. For E o' , n, and D, similar results were obtained when comparing the CV [E o' = +0.279 (±0.002) V vs Ag/AgCl; n = 0.97; D = 4.1 × 10 –6 cm 2 ·s –1 ] and SEC [E o' = +0.278 (±0.001) V vs Ag/AgCl; n = 0.91; D = 5.2 × 10 –6 cm 2 ·s –1 ] techniques. Both values align with what has been previously reported. To calculate D from the SEC data, modification of the classical equation used in chronoabsorptometry was required to accommodate the G-BDD electrode geometry. Overall, this work expands on the applicability of SEC techniques and BDD as a versatile electrode material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Estimation of secondary organic aerosol viscosity from explicit modeling of gas-phase oxidation of isoprene and α -pinene

Abstract. Secondary organic aerosols (SOA) are major components of atmospheric fine particulate matter, affecting climate and air quality. Mounting evidence exists that SOA can adopt glassy and viscous semisolid states, impacting formation and partitioning of SOA. In this study, we apply the GECKO-A (Generator of Explicit Chemistry and Kinetics of Organics in the Atmosphere) model to conduct explicit chemical modeling of isoprene photooxidation and α-pinene ozonolysis and their subsequent SOA formation. The detailed gas-phase chemical schemes from GECKO-A are implemented into a box model and coupled to our recently developed glass transition temperature parameterizations, allowing us to predict SOA viscosity. The effects of chemical composition, relative humidity, mass loadings and mass accommodation on particle viscosity are investigated in comparison with measurements of SOA viscosity. The simulated viscosity of isoprene SOA agrees well with viscosity measurements as a function of relative humidity, while the model underestimates viscosity of α-pinene SOA by a few orders of magnitude. This difference may be due to missing processes in the model, including autoxidation and particle-phase reactions, leading to the formation of high-molar-mass compounds that would increase particle viscosity. Additional simulations imply that kinetic limitations of bulk diffusion and reduction in mass accommodation coefficient may play a role in enhancing particle viscosity by suppressing condensation of semi-volatile compounds. The developed model is a useful tool for analysis and investigation of the interplay among gas-phase reactions, particle chemical composition and SOA phase state.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Effects of low-frequency voltage on nonlinear standing wave excitation, plasma uniformity, and ion dynamics in dual-frequency asymmetric capacitive discharges

Abstract It is known that in very-high-frequency (VHF) capacitively coupled plasmas, the higher harmonics generated by nonlinear sheath motion can enhance the standing wave effect (SWE), which can lead to center-peaked plasma density profiles. In this work, an improved nonlinear electromagnetic model incorporating a transmission line model, an electron momentum balance model, a bulk plasma model, a collisionless nonlinear numerical sheath model, and an ion Monte-Carlo collision (MCC) model is developed to study the effects of low-frequency (LF) voltage V L on the nonlinear standing wave excitation, plasma uniformity, and ion energy and angular distribution functions (IEDFs and IADFs) in dual-frequency (DF) asymmetric capacitive argon discharges at relatively low pressure of 3 Pa. The plasma diffusion in the radial direction and ion dynamics within the LF oscillating sheath are self-consistently considered. The LF voltage V L at 2 MHz varies from 0 to 700 V while the HF voltage V H at 60 MHz is fixed at 100 V. Simulation results indicate that without the addition of an LF source (i.e. V L = 0 V), there are a considerable number of high-order harmonics with short wavelengths, leading to significant SWE and central peak in the radial plasma density profile. Nevertheless, the high-order harmonic excitations tend to be weakened and merely occur around the phase of the full LF sheath collapse due to a shorter characteristic damping time of the surface waves as V L increases. This, combined with increased surface wavelengths of both the driving frequency and the higher harmonics at a higher V L , leads to suppressed standing waves and improved plasma uniformity. Meanwhile, the simulations show that both the low and the high energy peaks of IEDF move towards higher energies, and the energy peak separation width ΔEbecomes wider with the increase of V L . The IEDF at the radial center of the powered electrode exhibits a broader ΔEthan that at the edge. For the IADF, an increased V L results in more ions incident on the electrode with a smaller deflection angle. Because of a thinner sheath and a higher sheath voltage at the electrode center, the peak value of IADF at the electrode center is greater than that at the edge.

Physics↗
DOE OSTI2024

Robust Dissimilar Metal Friction Welded Spool for Enhanced Capability for Steam Power Components (Final Program Report)

This project successfully demonstrated the feasibility and advantages of producing durable, friction-welded dissimilar-metal spools, both with and without transition pieces, as well as the use of advanced oxidation-protective coatings for steam power applications. The work encompassed the optimization and full-scale production of NFA tubing, overcoming manufacturing and processing challenges to achieve enhanced strength, creep, and fatigue properties validated by extensive microstructural characterization. Optimized welding techniques were developed and refined for joining dissimilar materials, resulting in defect-free welds optimized for both low- and high-pressure boiler circuits. Systematic evaluation of welding parameters, coupled with heat treatments, ensured reliable performance and minimized weld defects such as banding and cracking. Comprehensive mechanical and non-destructive testing, including tensile, bend, fatigue, and CT scanning, confirmed the superior integrity and durability of the friction-welded joints under representative service conditions. To address oxidation-related degradation, a range of protective alloy coatings—such as IN625, APMT, Duplex 2507, and FeCrAlY—were selected and evaluated for their ability to counteract oxide notch formation at dissimilar metal interfaces. These coatings demonstrated improved oxidation resistance and long-term stability under thermal cycling, thereby extending weld service life. Thermal cyclic testing and long-term studies captured the phase stability and diffusion behavior of coated and uncoated configurations. Validated models for low-cycle fatigue (LCF), creep, and thermal mechanical fatigue (TMF) were developed to predict component life and failure modes. These models confirmed that friction-welded configurations exhibited significantly enhanced performance compared to conventional gas-tungsten arc welding (GTAW), with up to 7× improvement in creep resistance and at least 2× enhancement in fatigue properties. The introduction of a tailored transition piece further reduced thermally induced strains, enhancing fatigue life. The results demonstrate a robust pathway for retrofitting existing steam fleet components and upgrading future equipment to deliver substantially improved cold-start cycling behavior and reduction of unplanned outages due to premature weld failures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Unraveling Na and F coupling effects in stabilizing Li, Mn-rich layered oxide cathodes via local ordering modification

Regardless of the prevailing capacity and energy density of lithium, manganese-rich layered oxide (LMR-NMC) cathodes, continuous decay of voltage and overall energy density during cycling hinders this material from commercialization in Li-ion batteries. Although significant work focuses on single doping of Na and F, analysis in portraying the benefit of these ions in diminishing the structural distortion during activation cycle is in doubt. In this study, the effects of co-doping Na and F into the LMR-NMC structure in stabilizing the structure and mitigating oxygen loss during the first cycle are closely examined via in situ x-ray measurements. Na and F co-doping shows a 30% lower degree of Li + /Ni 2+ mixing in the Li layer (C2/m structure), 50% reduced Debye-Waller factor of Mn-O bonding, increase reversible TM migration, and faster Li diffusion relative to the pristine material. Due to the utilization of Ni redox chemistry below 4.4 V, less oxygen redox is required for charge compensation at high voltage. This study offers the first instance to quantitatively evaluate the effects of co-doping Na and F in LMR-NMC cathode in order to minimize voltage degradation by altering the local ordering of O3-type structure, which may rationalize strategies to overcome the issues of the material.

25 ENERGY STORAGE↗
DOE OSTI2021

Formation and evolution of protostellar accretion discs – I. Angular-momentum budget, gravitational self-regulation, and numerical convergence

Here, we investigate the formation and early evolution of a protostellar disc from a magnetized prestellar core using non-ideal magnetohydrodynamic (MHD) simulations including ambipolar diffusion and Ohmic dissipation. The dynamical contraction of the prestellar core ultimately leads to the formation of a first hydrostatic core, after ambipolar diffusion decouples the magnetic field from the predominantly neutral gas. The hydrostatic core accumulates angular momentum from the infalling material, evolving into a rotationally supported torus; this ‘first hydrostatic torus’ then forms an accreting protostar and a rotationally supported disc. The disc spreads out by gravitational instability, reaching ~30 au in diameter at ~3 kyr after protostar formation. The total mass and angular momentum of the protostar–disc system are determined mainly by accretion of gas from an infalling pseudo-disc, which has low specific angular momentum because of magnetic braking; their removal from the protostar–disc system by outflow and disc magnetic braking are negligible, in part because the magnetic field is poorly coupled there. The redistribution of angular momentum within the protostar–disc system is facilitated mainly by gravitational instability; this allows formation of relatively large discs even when the specific angular momentum of infalling material is low. We argue that such discs should remain marginally unstable as they grow (with Toomre Q ~ 1–2), an idea that is broadly consistent with recent observational estimates for Class 0/I discs. We discuss the numerical convergence of our results, and show that properly treating the inner boundary condition is crucial for achieving convergence at an acceptable computational cost.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Geomechanical in situ testing of fault reactivation in argillite repositories

Abstract. Pressurization of natural faults as a result of repository-induced effects can lead to their reactivation and permeability generation in case such features are present near disposal tunnels. Potential driving forces for such pressurization are the temperature increase caused by heat-producing high-level radioactive waste and the generation of hydrogen and other gases due to corrosion of engineered materials. We are primarily concerned about pressurization and fault activation in host rocks and faults that have very low natural permeability for pore pressure increases to dissipate, such as the argillite rocks currently investigated in Switzerland, France and other countries. This presentation discusses a series of in situ experiments of fault activation by fluid injection conducted in the argillite rock (Opalinus clay) at the Mont Terri underground research laboratory in Switzerland. A multi-model monitoring test bed was installed at Mont Terri that includes distributed fiber optics for strain, temperature, and acoustics; local fault pore pressure and three-dimensional displacement sensors; active seismic imaging; and passive seismic monitoring. The fault experiments (and their subsequent analysis via hydromechanical modeling) provide a new fundamental understanding of the coupling between pore pressure, fault deformation and permeability generation as a function of time and allow exploring how seismic and aseismic events may impact the integrity of faulted argillite host rock. Our experimental observations demonstrate that significant flow (and transport) can occur along the initially impermeable argillite fault when rupture is activated. However, the fault permeability decreases to almost its pre-activation value when fluid injection ceases and fluid pressure drops. Dilatant slip on the fault plane alone does not explain the observed increase in fault permeability; pressure-induced fault opening also plays a role, favored by the softness of the shale along with the fact that the structure of the fault zone prevents fluids from diffusing into the adjacent damage zone. Rupture initiation and permeability generation is initially aseismic, associated only with an increase in noise level and emerging tremors. Micro-earthquakes are initiated later in the experiments and typically occur away from the fluid-pressurized area. Hydromechanical models show that stress transferred from the initial aseismic deformation can build up to stress criticality and later induce seismic rupture. After presenting the experimental results, we will close the presentation with an outlook to future experimental campaigns using the fault test bed at Mont Terri. We are currently planning a controlled thermal stimulation of the fault, where instead of fluid injection as a trigger mechanism we will heat up the nearby rock volume and measure potential effects on fault stability. Lessons learned from our past and future experiments will help inform the safety assessment of geologic disposal in argillite host rock.

Birkholzer, Jens T.↗
DOE OSTI2025

Cosmological Neutron Stars Produce Diffuse Axion X-Ray Signatures

Axion-like particles can be abundantly produced through scattering processes in the cores of neutron stars (NSs). If they are ultralight ($m_a \lesssim 10^{-4}$ eV), then they can efficiently convert to detectable photons in the external NS magnetospheres, and if they are heavy ($m_a \gtrsim 1$ eV), then they can decay into photons before reaching Earth. In this work, we search for the resulting X-ray signatures from both of these channels summing over the $\textit{cosmological}$ NS population. We compare the predicted axion-induced X-ray signal to the cosmic X-ray background today as measured by a number of instruments such as NuSTAR, HEAO, Swift, and INTEGRAL. We model the axion-induced signal using NS cooling simulations and magnetic field evolution models. We find no evidence for axions and derive strong constraints for both ultralight and heavy axion scenarios, covering new parameter space for the axion-photon and axion-nucleon couplings. Our results rule out the axion-explanation of the Magnificent Seven X-ray excess from nearby isolated NSs.

Cosmology and Nongalactic Astrophysics (astro-ph.C↗
DOE OSTI2022

Bayesian optimization of dynamic Ce( III ) electrooxidation

Abstract Cerium(III/IV) is a redox couple with promising applications in redox flow batteries and redox‐mediated water electrolyzers, but due to its high oxidation potential, parasitic oxygen evolution can occur and decrease the Faradaic efficiency (FE) of the oxidation reaction. Dynamic potential dosing can help balance the transport limitations and the electrooxidation rates, allowing for control over the cerium(III) concentration near the electrode, enhancing FE. Due to the large number of possible pulsing operating conditions, Bayesian optimization (BO) was used to rapidly identify the optimal potential pulses. With an active pulse voltage of 2.5 V vs. Ag/AgCl, the maximum FE achieved was 0.91 (active pulse time = 5 ms, resting pulse time = 136 ms), underscoring the need for long inactive times for cerium(III) diffusion to the electrode. Furthermore, a multiobjective BO was performed to identify optimal trade‐offs between FE and the partial current density to achieve improvements over constant current operation.

Engineering↗
DOE OSTI2025

TRANSP integrated modeling code for interpretive and predictive analysis of tokamak plasmas

This paper provides a comprehensive review of the TRANSP code, a sophisticated tool for interpretive and predictive analysis of tokamak plasmas, detailing its major capabilities and features. It describes the equations for particle, power, and momentum balance analysis, as well as the poloidal field diffusion equations. The paper outlines the spatial and time grids used in TRANSP and details the equilibrium assumptions and solvers. Various models for heating and current drive and radiation, including updates to the NUBEAM model, are discussed. The handling of large-scale events such as sawtooth crashes and pellet injections is examined, along with the predictive capabilities for advancing plasma profiles. The integration of TRANSP with the ITER Integrated Modeling and Analysis Suite (IMAS) is highlighted, demonstrating enhanced data access and analysis capabilities. Additionally, the paper discusses best practices and continuous integration techniques to enhance TRANSP's robustness. The suite of TRANSP tools, designed for efficient data analysis and simulation, further supports the optimization of tokamak operations and coupling with other tokamak codes. Continuous development and support ensure that TRANSP remains a major code for the analysis of experimental data for controlled thermonuclear fusion, maintaining its critical role in supporting the optimization of tokamak operations and advancing fusion research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Multidimensional visualization of the dynamic evolution of Li metal via in situ/operando methods

The growing demands for high-energy density electrical energy storage devices stimulate the coupling of conversion-type cathodes and lithium (Li) metal anodes. While promising, the use of these “Li-free” cathodes brings new challenges to the Li anode interface, as Li needs to be dissolved first during cell operation. In this study, we have achieved a direct visualization and comprehensive analysis of the dynamic evolution of the Li interface. The critical metrics of the interfacial resistance, Li growth, and solid electrolyte interface (SEI) distribution during the initial dissolution/deposition processes were systematically investigated by employing multidimensional analysis methods. They include three-electrode impedance tests, in situ atomic force microscopy, scanning electrochemical microscopy, and cryogenic scanning transmission electron microscopy. The high-resolution imaging and real-time observations show that a loose, diffuse, and unevenly distributed SEI is formed during the initial dissolution process. This leads to the dramatically fast growth of Li during the subsequent deposition, deviating from Fick’s law, which exacerbates the interfacial impedance. The compactness of the interfacial structure and enrichment of electrolyte species at the surface during the initial deposition play critical roles in the long-term stability of Li anodes, as revealed by operando confocal Raman spectroscopic mapping. In conclusion, our observations relate to ion transfer, morphological and structural evolution, and Li (de)solvation at Li interfaces, revealing the underlying pathways influenced by the initial dissolution process, which promotes a reconsideration of anode investigations and effective protection strategies.

25 ENERGY STORAGE↗
DOE OSTI2023

Mechanical behavior of polyamide-6 after combined photo-oxidative and hygrothermal aging

The effect of moisture on the photo-oxidative degradation of polyamide-6 (PA-6) was studied by analyzing the mechanical response after two different accelerated aging procedures. In the first aging procedure, the PA-6 was only exposed to ultra-violet (UV) radiation at 60 °C. In the second procedure, the same duration of UV radiation was periodically interrupted while the relative humidity was raised to 100%. Diffusion-limited and nominally homogeneous degradation conditions were investigated using bulk and film specimens, respectively. Accelerated UV aging reduced the ductility of PA-6, but the additional hygrothermal exposure had no effect on the ductility or strength, indicating that humidity did not influence the photo-oxidation of PA-6. In conclusion, this finding contrasts with previous studies that found thermo-oxidation of PA-6 was accelerated by moisture.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Computational simulation of asymmetric phase transformation in cracked Li₇La₃Zr₂O₁₂: Variant selection and chemo-mechanical implications

Coupling between microcracks and phase transformation in ion-conducting ceramics can jointly affect mechanical responses and ion transport. In this work we investigate the cubic-to-tetragonal phase transformation in Li₇La₃Zr₂O₁₂ in the presence of a microcrack under hydrostatic loading and quantify its implications for crack-tip stress concentration and Li-ion transport using phase-field and molecular dynamics simulations. The phase transformation exhibits a strong asymmetry between hydrostatic tension and compression. Under tension, the crack edge nucleates one tetragonal variant that amplifies the crack-tip stress intensity and promotes crack opening. Under compression, the crack tip nucleates a different tetragonal variant that enhances the stress-induced crack-closure tendency. Effective Li diffusivity analysis shows faster transport degradation under compression due to accelerated transformation kinetics, exposing a trade-off between mechanical stability and ionic conductivity. These results highlight the intertwined nature of cracking, phase transformation, and ionic transport in ion-conducting oxides and provide mechanistic insights into chemo-mechanical degradation of solid electrolytes.

36 MATERIALS SCIENCE↗