Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “demand”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Identification of terms to define unconstrained air transportation demands

The factors involved in the evaluation of unconstrained air transportation systems were carefully analyzed. By definition an unconstrained system is taken to be one in which the design can employ innovative and advanced concepts no longer limited by present environmental, social, political or regulatory settings. Four principal evaluation criteria are involved: (1) service utilization, based on the operating performance characteristics as viewed by potential patrons; (2) community impacts, reflecting decisions based on the perceived impacts of the system; (3) technological feasibility, estimating what is required to reduce the system to practice; and (4) financial feasibility, predicting the ability of the concepts to attract financial support. For each of these criteria, a set of terms or descriptors was identified, which should be used in the evaluation to render it complete. It is also demonstrated that these descriptors have the following properties: (a) their interpretation may be made by different groups of evaluators; (b) their interpretations and the way they are used may depend on the stage of development of the system in which they are used; (c) in formulating the problem, all descriptors should be addressed independent of the evaluation technique selected.

Jacobson, I. D.↗
NASA NTRS1983

The space technology demand on materials and processes

Space technology requires a rational and accurate policy of materials and processes selection. This paper examines some areas of space technology where materials and process problems have occurred in the past and how they can be solved in the future.

Dauphin, J.↗
NASA NTRS1982

A Methology for Assessing the Regional Transportation Energy Demands of Different Spatial Residential Development Scenarios: a Case Study for the Upper Housatonic River Basin, Massachusetts

A method is suggested whereby regional landscape planning efforts can be aided by the use of a geographic information system to determine sites for more energy efficient residential and mixed use developments within a study area. The location of land parcels suited for residential and mixed land use developments in the Upper Housatonic River Basin Study Area in Berkshire County, Massachusetts is described as well as the three development options. Significant steps in the procedure are discussed and the computation of the transportation energy requirement is elaborated.

Oski, J. A.↗
NASA NTRS1983

Satellite fixed communications service: A forecast of potential domestic demand through the year 2000. Volume 3: Appendices

Voice applications, data applications, video applications, impacted baseline forecasts, market distribution model, net long haul forecasts, trunking earth station definition and costs, trunking space segment cost, trunking entrance/exit links, trunking network costs and crossover distances with terrestrial tariffs, net addressable forecasts, capacity requirements, improving spectrum utilization, satellite system market development, and the 30/20 net accessible market are considered.

Kratochvil, D.↗
NASA NTRS1983

Satellite provided customer premise services: A forecast of potential domestic demand through the year 2000. Volume 3: Appendices

Voice applications, data applications, video applications, impacted baseline forecasts, market distribution, potential CPS (customers premises services) user classes, net long haul forecasts, CPS cost analysis, overall satellite forecast, CPS satellite market, Ka-band CPS satellite forecast, nationwide traffic distribution model, and intra-urban topology are discussed.

Kratochvil, D.↗
NASA NTRS1983

Control - Demands mushroom as station grows

The NASA space station, which is presently in the planning stage, is to be composed of both rigid and nonrigid modules, rotating elements, and flexible appendages subjected to environmental disturbances from the earth's atmospheric gravity gradient, and magnetic field, as well as solar radiation and self-generated disturbances. Control functions, which will originally include attitude control, docking and berthing control, and system monitoring and management, will with evolving mission objectives come to encompass such control functions as articulation control, autonomous navigation, space traffic control, and large space structure control. Attention is given to the advancements in modular, distributed, and adaptive control methods, as well as system identification and hardware fault tolerance techniques, which will be required.

Szirmay, S. Z.↗
NASA NTRS1983

A multi-item maintenance center inventory model for low-demand reparable items

In many military and commercial contexts, complex equipment undergoes scheduled maintenance overhauls at regular intervals during which all failed components are replaced. Failure to have replacements on hand for all failed parts requires emergency measures at premium cost. When reparable parts are highly reliable and expensive, both holding and shortage costs are high. This model determines the reparable parts inventory for a maintenance center under three alternative criteria: (1) maximizing job-completion rate subject to constraint on total holding costs, (2) minimizing total holding costs plus expected job noncompletion costs, and (3) minimizing total holding costs subject to a required minimum job-completion rate. Exact solutions may be obtained using dynamic programming. Approximate solutions, found easily by marginal analysis, have readily computed bounds on possible error. The solution methods for the three formulations are illustrated in a simple example.

Schaefer, M. K.↗
NASA NTRS1984

Multi-crew Model Analytic Assessment of Landing Performance and Decision-making Demands

Some of the relative merits of the PROCRU approach to modelling multi-crew flight deck activity during approach to landing are discussed. On the basis of two realistic flight scenarios, the ability of the model to simulate different vectored approaches is demonstrated. A secondary exemplary analysis of a nominal and an accelerated final approach is performed, illustrating the potential of the expected net gain (ENGP) functions as a measure of decision-making load.

Milgram, P.↗
NASA NTRS1985

Propulsion evaluation for orbit-on-demand vehicles

Future earth-to-orbit vehicles may be required to reach orbit within hours or even minutes of a decision. A study has been conducted to consider vehicles with such a capability. In Phase I of the study, 11 vehicles were designed to deploy 5000 lb to a polar orbit. Changes in the designs were examined parametrically for increased on-orbit maneuvers, increased payload, and other mission variations. Based on the results, two concepts were selected for Phase II design work: a vertical-takeoff, two-stage system and a horizontal-takeoff, two-stage system with an airbreathing subsonic first stage. The results of several propulsion evaluations are presented, including liftoff thrust-to-weight effects, dual-fuel propulsion for a horizontal-takeoff concept, and the effect of using fluorine.

Martin, J. A.↗
NASA NTRS1986

Alloy chemistry and microstructural control to meet the demands of the automotive Stirling engine

The automotive Stirling engine now under development by DOE/NASA as an alternative to the internal combustion engine, imposes severe materials requirements for the hot portion of the engine. Materials selected must be low cost and contain a minimum of strategic elements so that availability is not a problem. Heater head tubes contain high pressure hydrogen on the inside and are exposed to hot combustion gases on the outside surface. The cylinders and regenerator housings must be readily castable into complex shapes having varying wall thicknesses and be amenable to brazing and welding operations. Also, high strength, oxidation resistance, resistance to hydrogen permeation, cyclic operation, and long-life are required. A research program conducted by NASA Lewis focused on alloy chemistry and microstructural control to achieve the desired properties over the life of the engine. Results of alloy selection, characterization, evaluation, and actual engine testing of selected materials are presented.

Stephens, J. R.↗
NASA NTRS1986

Dynamic remapping of parallel computations with varying resource demands

A large class of computational problems is characterized by frequent synchronization, and computational requirements which change as a function of time. When such a problem must be solved on a message passing multiprocessor machine, the combination of these characteristics lead to system performance which decreases in time. Performance can be improved with periodic redistribution of computational load; however, redistribution can exact a sometimes large delay cost. We study the issue of deciding when to invoke a global load remapping mechanism. Such a decision policy must effectively weigh the costs of remapping against the performance benefits. We treat this problem by constructing two analytic models which exhibit stochastically decreasing performance. One model is quite tractable; we are able to describe the optimal remapping algorithm, and the optimal decision policy governing when to invoke that algorithm. However, computational complexity prohibits the use of the optimal remapping decision policy. We then study the performance of a general remapping policy on both analytic models. This policy attempts to minimize a statistic W(n) which measures the system degradation (including the cost of remapping) per computation step over a period of n steps. We show that as a function of time, the expected value of W(n) has at most one minimum, and that when this minimum exists it defines the optimal fixed-interval remapping policy. Our decision policy appeals to this result by remapping when it estimates that W(n) is minimized. Our performance data suggests that this policy effectively finds the natural frequency of remapping. We also use the analytic models to express the relationship between performance and remapping cost, number of processors, and the computation's stochastic activity.

Nicol, D. M.↗
NASA NTRS1985

Weights assessment for orbit-on-demand vehicles

Future manned, reusable earth-to-orbit vehicles may be required to reach orbit within hours or even minutes of a mission decision. A study has been conducted to consider vehicles with such a capability. In the initial phase of the study, 11 vehicles were sized for deployment of 5000 lbs to a polar orbit. From this matrix, two of the most promising concepts were resized for a modified mission and payload. A key feature of the study was the use of consistent mass estimating techniques for a broad range of concepts, allowing direct comparisons of sizes and weights.

Macconochie, I. O.↗
NASA NTRS1986

Orbit-on-demand vehicle propelled by air-turborocket/ramjet engines

A preliminary design study has been completed for a fully reusable, single-stage-to-orbit transatmospheric vehicle. The specified mission capability was to lift a 20,000 lb payload to low earth orbit. A ground accelerator-assisted horizontal take-off was chosen to increase operational flexibility. The multi-mode propulsion system included the use of air-turborocket, ramjet, scramjet and rocket engines. Weight and performance estimates were obtained for the vehicle. A computer package was developed to perform aerothermodynamic analyses of the propulsion modes throughout the flight environment from take-off to low earth orbit. Results are presented for a semi-optimized trajectory. The analysis indicates that a vehicle of this type has great potential for providing low cost, flexible access to space.

Hartung, L.↗
NASA NTRS1988

Alloy chemistry and microstructural control to meet the demands of the automotive Stirling engine

The automotive Stirling engine now under development by DOE/NASA as an alternative to the internal combustion engine, imposes severe materials requirements for the hot portion of the engine. Materials selected must be low cost and contain a minimum of strategic elements so that availability is not a problem. Heater head tubes contain high pressure hydrogen on the inside and are exposed to hot combustion gases on the outside surface. The cylinders and regenerator housings must be readily castable into complex shapes having varying wall thicknesses and be amenable to brazing and welding operations. Also, high strength, oxidation resistance, resistance to hydrogen permeation, cyclic operation, and long-life are required. A research program conducted by NASA Lewis focused on alloy chemistry and microstructural control to achieve the desired properties over the life of the engine. Results of alloy selection, characterization, evaluation, and actual engine testing of selected materials are presented.

Stephens, Joseph R.↗
NASA NTRS1987

Automation - Changes in cognitive demands and mental workload

The effect of partial automation on mental workloads in man/machine tasks is investigated experimentally. Subjective workload measures are obtained from six subjects after performance of a task battery comprising two manual (flight-path control, FC, and target acquisition, TA) tasks and one decisionmaking (engine failure, EF) task; the FC task was performed in both a fully manual (altitude and lateral control) mode and in a semiautomated mode (autmatic latitude control). The performance results and subjective evaluations are presented in graphs and characterized in detail. The automation is shown to improve objective performance and lower subjective workload significantly in the combined FC/TA task, but not in the FC task alone or in the FC/EF task.

Tsang, Pamela S.↗
NASA NTRS1988

Dynamic remapping of parallel computations with varying resource demands

The issue of deciding when to invoke a global load remapping mechanism is studied. Such a decision policy must effectively weigh the costs of remapping against the performance benefits, and should be general enough to apply automatically to a wide range of computations. The authors propose a general mapping decision heuristic, then study its effectiveness and its anticipated behavior on two very different models of load evolution. Assuming only that the remapping cost is known, this policy dynamically minimizes system degradation (including the cost of remapping) for each computation step. This policy is quite simple, choosing to remap when the first local minimum in the degradation function is detected. Simulations show that the decision obtained provides significantly better performance than that achieved by never remapping. The authors also observe that the average intermapping frequency is quite close to the optimal fixed remapping frequency.

Nicol, David M.↗