Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data versions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

NASA's UTM Research

The Technology Capability Level-2 National Campaign (TCL2nc) was conducted at six different test sites located across the USA, during May and June of 2017. The campaign resulted in over 250 data collection flights using 26 different aircraft and involving 23 flight crews. Flights not only varied in duration, but also in the environments and terrains over which they flew. The TCL2nc highlighted beyond visual line of sight (BVLOS) and altitude-stratified operations, and saw five partners bring their own, independently built, UTM Service Supplier (USS) for use during the flight tests. This document presents data collected during the TCL2nc that informs the 'Operator' section of the 'Requirements/Best Practices' from the UTM Technical Capability Matrix and Guidelines to Operate (Rios, version as of March 2017). A review of the data collected indicated that although teams were well qualified on paper (in terms of both completing training and having experience with flying UAS vehicles), greater consideration should be given to the unique perspectives and backgrounds of future UAS operators. Overall, teams looked at a variety of sources for information, including USS client-displays, and participants became more aware of the need to be aware of other vehicles, highlighting the value of reporting information. Observations found that flight crews' time to respond to a UTM issue depended heavily on the team structure, communication efficiency, and crew procedures.

Mercer, Joey↗
NASA NTRS2023

Passive Microwave Arctic Sea Ice Melt Onset Dates From the Advanced Horizontal Range Algorithm 1979 - 2022

The onset of the summer melt season is a key stage of the Arctic sea ice seasonal cycle and is an indicator of climate change. Surface melting of the bare or snow-covered sea ice is detected using passive microwave satellite observations. The data set presented here is a 44 year record of Arctic sea ice annual melt onset (MO) dates for 1979–2022 produced using an updated version of the Advanced Horizontal Range Algorithm (AHRA). This data product contains annual maps of the sea ice MO date and a set of descriptive statistics summarizing the data. This paper describes a new update of the AHRA methodology, now AHRA V5, including key changes to the algorithm starting date and sea ice mask methodology to improve estimates of early-season MO dates especially near the sea ice periphery. AHRA V5 data are suitable for monitoring trends in Arctic and regional sea ice MO dates and for process studies of atmosphere-sea ice interactions during the early spring and summer months.

Angela C. Bliss↗
NASA NTRS2013

Analysis of Multivariate Experimental Data Using A Simplified Regression Model Search Algorithm

A new regression model search algorithm was developed in 2011 that may be used to analyze both general multivariate experimental data sets and wind tunnel strain-gage balance calibration data. The new algorithm is a simplified version of a more complex search algorithm that was originally developed at the NASA Ames Balance Calibration Laboratory. The new algorithm has the advantage that it needs only about one tenth of the original algorithm's CPU time for the completion of a search. In addition, extensive testing showed that the prediction accuracy of math models obtained from the simplified algorithm is similar to the prediction accuracy of math models obtained from the original algorithm. The simplified algorithm, however, cannot guarantee that search constraints related to a set of statistical quality requirements are always satisfied in the optimized regression models. Therefore, the simplified search algorithm is not intended to replace the original search algorithm. Instead, it may be used to generate an alternate optimized regression model of experimental data whenever the application of the original search algorithm either fails or requires too much CPU time. Data from a machine calibration of NASA's MK40 force balance is used to illustrate the application of the new regression model search algorithm.

multivariate experimental data↗
NASA NTRS1991

Comparison of several system identification methods for flexible structures

In the last few years various methods of identifying structural dynamics models from modal testing data have appeared. This paper presents a comparison of four of these algorithms: the Eigensystem Realization Algorithm (ERA), the modified version ERA/DC where DC indicates that it makes use of data correlations, the Q-Markov Cover algorithm, and an algorithm due to Moonen, DeMoor, Vandenberghe and Vandewalle. The comparison is made using a five mode computer model of the 20 meter Mini-Mast truss structure at NASA Langley Research Center, and various noise levels are superimposed to produce simulated data. The results show that for the example considered ERA/DC generally gives the best results; that ERA/DC is always at least as good as ERA which is shown to be a special case of ERA/DC; that Q-Markov requires the use of significantly more data than ERA/DC to produce comparable results; and that in some situations Q-Markov cannot produce comparable results.

Lew, J.-S.↗
NASA NTRS1993

Properties of Extruded PS-212 Type Self-Lubricating Materials

Research has been underway at the NASA Lewis Research Center since the 1960's to develop high temperature, self-lubricating materials. The bulk of the research has been done in-house by a team of researchers from the Materials Division. A series of self-lubricating solid material systems has been developed over the years. One of the most promising is the composite material system referred to as PS-212 or PM-212. This material is a powder metallurgy product composed of metal bonded chromium carbide and two solid lubricating materials known to be self-lubricating over a wide temperature range. NASA feels this material has a wide potential in industrial applications. Simplified processing of this material would enhance its commercial potential. Processing changes have the potential to reduce processing costs, but tribological and physical properties must not be adversely affected. Extrusion processing has been employed in this investigation as a consolidation process for PM-212/PS-212. It has been successful in that high density bars of EX-212 (extruded PM-212) can readily be fabricated. Friction and strength data indicate these properties have been maintained or improved over the P.M. version. A range of extrusion temperatures have been investigated and tensile, friction, wear, and microstructural data have been obtained. Results indicate extrusion temperatures are not critical from a densification standpoint, but other properties are temperature dependent.

Waters, W. J.↗
NASA NTRS2017

Medical Data Architecture Project Capabilities and Design

Mission constraints will challenge the delivery of medical care on a long-term, deep space exploration mission. This type of mission will be restricted in the availability of medical knowledge, skills, procedures and resources to prevent, diagnose, and treat in-flight medical events. Challenges to providing medical care are anticipated, including resource and resupply constraints, delayed communications and no ability for medical evacuation. The Medical Data Architecture (MDA) project will enable medical care capability in this constrained environment. The first version of the system, called "Test Bed 1," includes capabilities for automated data collection, data storage and data retrieval to provide information to the Crew Medical Officer (CMO). Test Bed 1 seeks to establish a data architecture foundation and develop a scalable data management system through modular design and standardized interfaces. In addition, it will demonstrate to stakeholders the potential for an improved, automated, flow of data to and from the medical system over the current methods employed on the International Space Station (ISS). It integrates a set of external devices, software and processes, and a Subjective, Objective, Assessment, and Plan (SOAP) note commonly used by clinicians. Medical data like electrocardiogram plots, heart rate, skin temperature, respiration rate, medications taken, and more are collected from devices and stored in the Electronic Medical Records (EMR) system, and reported to crew and clinician. Devices integrated include the Astroskin biosensor vest and IMED CARDIAX electrocardiogram (ECG) device with INEED MD ECG Glove, and the NASA-developed Medical Dose Tracker application. The system is designed to be operated as a standalone system, and can be deployed in a variety of environments, from a laptop to a data center. The system is primarily composed of open-source software tools, and is designed to be modular, so new capabilities can be added. The software components and integration methods will be discussed.

Data architecture↗
NASA NTRS2015

Integrated Medical Model Overview

The Integrated Medical Model (IMM) Project represents one aspect of NASA's Human Research Program (HRP) to quantitatively assess medical risks to astronauts for existing operational missions as well as missions associated with future exploration and commercial space flight ventures. The IMM takes a probabilistic approach to assessing the likelihood and specific outcomes of one hundred medical conditions within the envelope of accepted space flight standards of care over a selectable range of mission capabilities. A specially developed Integrated Medical Evidence Database (iMED) maintains evidence-based, organizational knowledge across a variety of data sources. Since becoming operational in 2011, version 3.0 of the IMM, the supporting iMED, and the expertise of the IMM project team have contributed to a wide range of decision and informational processes for the space medical and human research community. This presentation provides an overview of the IMM conceptual architecture and range of application through examples of actual space flight community questions posed to the IMM project.

Spae Adaptation Syndrome↗
NASA NTRSDate not supplied

North American Land Data Assimilation (NLDAS) Data and Services at NASA GES DISC

The North American Land Data Assimilation System (NLDAS, https://ldas.gsfc.nasa.gov/nldas) integrates a large quantity of observation-based and model reanalysis data to drive offline (not coupled to the atmosphere) land surface models (LSMs) to produce fields of soil moisture, snow, and surface fluxes. The NLDAS-2 data sets currently archived at, and distributed by, the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC, https://disc.gsfc.nasa.gov) have been updated to NLDAS Version 2.0 (NLDAS-2.0). This presentation provides an overview of the updated NLDAS-2.0 data at NASA GES DISC and discusses the methods for the public to access the data as well as the data services available.

Ashley Heath↗
NASA NTRS2004

Evaluation of Experimental Data from the GAINS Balloon GPS Surface Reflection Instrument

The GPS Surface Reflection Instrument was integrated as an experiment on the GAINS (Global Airocean IN-situ System) 48-hour balloon mission flown in September 2001. The data collected by similar instruments in the past has been used to measure sea state from which ocean surface winds can be accurately estimated. The GPS signal has also been shown to be reflected from wetland areas and even from subsurface moisture. The current version of the instrument has been redesigned to be more compact, use less power, and withstand a greater variation in environmental conditions than previous versions. This instrument has also incorporated a new data collection mode to track 5 direct satellites (providing a continuous navigation solution) and multiplex the remaining 7 channels to track the reflected signal of the satellite tracked in channel 0. The new software mode has been shown to increase the signal to noise ratio of the collected data and enhance the science return of the instrument. During the 48-hour flight over the Northwest US, the instrument will measure surface reflections that can be detected over the balloon's ground track. Since ground surface elevations in this area vary widely from the WGS-84 ellipsoid altitude, the instrument software has been modified to incorporate a surface altitude correction based on USGS 30-minute Digital Elevation Models. Information presented will include facts about instrument design goals, data collection methodologies and algorithms, and results of the science data analyses for the 48-hour mission.

Gance, George G.↗
NASA NTRS2002

Evaluation of Experimental Data from the Gains Balloon GPS Surface Reflection Instrument

The GPS Surface Reflection Instrument was integrated as an experiment on the GAINS (Global Airocean IN-situ System) 48-hour balloon mission flown in June 2002. The data collected by similar instruments in the past has been used to measure sea state from which ocean surface winds can be accurately estimated. The GPS signal has also been shown to be reflected from wetland areas and even from subsurface moisture. The current version of the instrument has been redesigned to be more compact, use less power, and withstand a greater variation in environmental conditions than previous versions. This instrument has also incorporated a new data collection mode to track 5 direct satellites (providing a continuous navigation solution) and multiplex the remaining 7 channels to track the reflected signal of the satellite tracked in channel 0. The new software mode has been shown to increase the signal to noise ratio of the collected data and enhance the science return of the instrument. During the GAINS balloon flight over the Northwest US, the instrument measured surface reflections as they were detected over the balloon's ground track. Since ground surface elevations in this area vary widely from the WGS-84 ellipsoid altitude, the instrument software has been modified to incorporate a surface altitude correction based on USGS 30-minute Digital Elevation Models. Information presented will include facts about instrument design goals, data collection methodologies and algorithms, and will focus on results of the science data analyses for the mission.

Ganoe, George G.↗
NASA NTRS1989

Visualizing large data sets in the earth sciences

The authors describe the capabilities of McIDAS, an interactive visualization system that is vastly increasing the ability of earth scientists to manage and analyze data from remote sensing instruments and numerical simulation models. McIDAS provides animated three-dimensionsal images and highly interactive displays. The software can manage, analyze, and visualize large data sets that span many physical variables (such as temperature, pressure, humidity, and wind speed), as well as time and three spatial dimensions. The McIDAS system manages data from at least 100 different sources. The data management tools consist of data structures for storing different data types in files, libraries of routines for accessing these data structures, system commands for performing housekeeping functions on the data files, and reformatting programs for converting external data to the system's data structures. The McIDAS tools for three-dimensional visualization of meteorological data run on an IBM mainframe and can load up to 128-frame animation sequences into the workstations. A highly interactive version of the system can provide an interactive window into data sets containing tens of millions of points produced by numerical models and remote sensing instruments. The visualizations are being used for teaching as well as by scientists.

Hibbard, William↗
NASA NTRSDate not supplied

Study the Vertical Structure and Transportation of the Extreme African Dust Storms using MERRA-2 Data

The Modern-Era Retrospective Analysis for Research and Application, Version 2 (MERRA-2) provides the first long-term global reanalysis to assimilate space-based observations of aerosols and represents their interactions with other physical processes in the climate system. In this study, we have examined the variations of atmospheric aerosols for the last 20 years since 2002 using the sub-daily MERRA-2 data and found seven extreme African dust storms that were transported westward across the Atlantic Ocean from the Sahara, crossing 70o-80oW. In particular, the well-known ‘Godzilla’ dust storm occurred in June 2020, and its dust cloud, with the highest-on-record aerosol optical depths, was transported toward the Americas. This storm greatly degraded air quality over large areas of the Caribbean Basin and the United States. The air quality index reached unhealthy levels for sensitive groups in more than ten U.S. states. In our study, the vertical structure and transport characteristics of the dust layers during this extreme dust event are investigated. The geopotential height and temperature were found anomalously low (around 600 hPa) over the Atlantic Ocean off northwest Africa before the June 2020 dust storm. This anomalous circulation pattern was persistent for more than 12 days starting from around May 30, breaking the regular easterly waves that transport dust from the Sahara Desert to the west. To verify the data quality, daily MERRA-2 PM2.5 data were calculated and compared with PM2.5 observations from the U.S. Environmental Protection Agency (EPA) at several selected ground stations in Florida. We provide this case study to illustrate how to effectively use various MERRA-2 data services at Goddard Earth Sciences Data and Information Services Center (GES DISC) where MERRA-2 data are archived, hoping to help data users in exploring their own topics of interest using data services at GES DISC.

data management, reanalysis↗
NASA NTRS2000

Evaluation of Hardware and Procedures for Astronaut Assembly and Repair of Large Precision Reflectors

A detailed procedure is presented that enables astronauts in extravehicular activity (EVA) to efficiently assemble and repair large (i.e., greater than 10m-diameter) segmented reflectors, supported by a truss, for space-based optical or radio-frequency science instruments. The procedure, estimated timelines, and reflector hardware performance are verified in simulated 0-g (neutral buoyancy) assembly tests of a 14m-diameter, offset-focus, reflector test article. The test article includes a near-flight-quality, 315-member, doubly curved support truss and 7 mockup reflector panels (roughly 2m in diameter) representing a portion of the 37 total panels needed to fully populate the reflector. Data from the tests indicate that a flight version of the design (including all reflector panels) could be assembled in less than 5 hours - less than the 6 hours normally permitted for a single EVA. This assembly rate essentially matches pre-test predictions that were based on a vast amount of historical data on EVA assembly of structures produced by NASA Langley Research Center. Furthermore, procedures and a tool for the removal and replacement of a damaged reflector panel were evaluated, and it was shown that EVA repair of this type of reflector is feasible with the use of appropriate EVA crew aids.

Lake, Mark S.↗
NASA NTRSDate not supplied

Newly Available Single Field-of-view Sounder Atmospheric Product (SiFSAP) and Its Derivative Product

The Single Field-of-view Sounder Atmospheric product (SiFSAP) has been developed and delivered to NASA GES DISC. The SiFSAP Algorithm Theoretical Basis Documents (ATBD) and users manuals are ready to be released to public. This novel data product supplements other operational products such as AIRS version 7 and the Community Long-term Infrared Microwave Combined Atmospheric Product System (CLIMCAPS) from two main perspectives: 1) improving the spatial resolution of sounder Level-2 data to extend its usage in weather and dynamics focus area; 2) establishing radiance closure between Level-2 data and directly measured Level-1 radiances to facilitate the climate trend analysis. SiFSAP has 3-times higher spatial resolution and 9-times denser data products comparing to current NASA and NOAA operational IR sounder products. SiFSAP is derived using the optimal estimation method based physical retrieval algorithm. The Principal Component-based Radiative Transfer Model (PCRTM) which includes the cloud scattering simulation is used for the forward model so that the solution can fit the spectral radiances under all-sky conditions for individual single field-of-view (SFOV) measurements. A general introduction of the SiFSAP algorithm and corresponding validation work will be presented. Also introduced here is the Climate Fingerprinting Sounder product (ClimFiSP) that is the derivative product of SiFSAP and will be released in the near future. The ClimFiSP algorithm uses pre-constructed fingerprinting relationship to achieve a low-latency Level-3 data production and facilitate the fusion of data of different sounders.

Wan Wu↗
NASA NTRS2005

Contour Error Map Algorithm

The contour error map (CEM) algorithm and the software that implements the algorithm are means of quantifying correlations between sets of time-varying data that are binarized and registered on spatial grids. The present version of the software is intended for use in evaluating numerical weather forecasts against observational sea-breeze data. In cases in which observational data come from off-grid stations, it is necessary to preprocess the observational data to transform them into gridded data. First, the wind direction is gridded and binarized so that D(i,j;n) is the input to CEM based on forecast data and d(i,j;n) is the input to CEM based on gridded observational data. Here, i and j are spatial indices representing 1.25-km intervals along the west-to-east and south-to-north directions, respectively; and n is a time index representing 5-minute intervals. A binary value of D or d = 0 corresponds to an offshore wind, whereas a value of D or d = 1 corresponds to an onshore wind. CEM includes two notable subalgorithms: One identifies and verifies sea-breeze boundaries; the other, which can be invoked optionally, performs an image-erosion function for the purpose of attempting to eliminate river-breeze contributions in the wind fields.

Merceret, Francis↗
NASA NTRS2018

The Ability of NASA's Meteoroid Engineering Model to Replicate in Situ Impact Data

Meteoroid environment models must describe the mass, directionality, velocity, and density distributions of meteoroids in order to correctly predict the rate at which meteoroids impact spacecraft. We present an updated version of NASA's Meteoroid Engineering Model (MEM) that better captures the correlation between directionality and velocity and incorporates a bulk density distribution. We compare the resulting model with the rate of large particle impacts seen on the Long Duration Exposure Facility (LDEF) and the Pegasus I and II satellites. The updated model shows closer agreement with these in situ data than previous versions of MEM.

Moorhead, Althea V.↗
NASA NTRS1990

A catalog of selected compact radio sources for the construction of an extragalactic radio/optical reference frame (Argue et al. 1984): Documentation for the machine-readable version

This document describes the machine readable version of the Selected Compact Radio Source Catalog as it is currently being distributed from the international network of astronomical data centers. It is intended to enable users to read and process the computerized catalog. The catalog contains 233 strong, compact extragalactic radio sources having identified optical counterparts. The machine version contains the same data as the published catalog and includes source identifications, equatorial positions at J2000.0 and their mean errors, object classifications, visual magnitudes, redshift, 5-GHz flux densities, and comments.

Source record↗
NASA NTRS1994

NSSDC provides network access to key data via NDADS

The National Space Science Data Center (NSSDC) is making a growing fraction of its most customer-desirable data electronically accessible via both the local and wide area networks. NSSDC is witnessing a great increase in its data dissemination owing to this network accessibility. To provide its customers the best data accessibility, the NSSDC makes data available from a nearline, mass storage system, the NSSDC Data Archive and Dissemination Service (NDADS). The NDADS, the initial version was made available in January 1992, is a customized system of hardware and software that provides users access to the nearline data via ANONYMOUS FTP, an e-mail interface (ARMS), and a C-based software library. In January 1992, the NDADS registered 416 requests for 1,957 files. By December of 1994, NDADS had been populated with 800 gigabytes of electronically accessible data and had registered 1458 requests for 20,887 files. In this report we describe the NDADS system, both hardware and software. Later in the report, we discuss some of the lessons that were learned as a result of operating NDADS, particularly in the area of ingest and dissemination.

Behnke, Jeanne↗