Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary layer analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Cooling by discrete and porous injection into a turbulent, supersonic boundary layer

A summary is provided of an experimental investigation which was carried out to determine the cooling effectiveness of an injection of water through slotted and porous surfaces into a turbulent, supersonic boundary layer. Correlations, based on the experimental data and the supporting analysis, were incorporated into a computer-code model. The model is used to compute discrete injection coolant flow rate requirements for arbitrary slot sizes and heating environments.

Clark, K. J.↗

Laminar flow at a three-dimensional stagnation point with large rates of injection

Exact calculations of the titled flow are presented and compared to the predictions of an asymptotic analysis for large rates of injection. The inner layer of the boundary layer is found to involve outflow in both orthogonal directions whether the external flow along the y axis is inward or outward. As a result, the flow at a nearly two-dimensional stagnation point involves drastic changes as a weak outflow changes to a weak inflow. It is also found that the velocity profiles in the two directions in the inner layer are quite different.

Libby, P. A.↗

A computer program for the design and analysis of low-speed airfoils

A conformal mapping method for the design of airfoils with prescribed velocity distribution characteristics, a panel method for the analysis of the potential flow about given airfoils, and a boundary layer method have been combined. With this combined method, airfoils with prescribed boundary layer characteristics can be designed and airfoils with prescribed shapes can be analyzed. All three methods are described briefly. The program and its input options are described. A complete listing is given as an appendix.

Eppler, R.↗

Bivariate conditional sampling of buoyancy flux during an intense cold-air outbreak

The joint frequency distribution technique was used to analyze buoyancy fluxes in the marine atmospheric boundary layer (MABL) for the cloud street regime noted during the Genesis of Atlantic Lows Experiment. It is found that for the lower half of the MABL, the buoyancy flux is mainly generated by the rising thermals and the sinking compensating ambient air, and is mainly consumed by the entrainment and detrainment of thermals, penetrative convection, and the entrainment from the MABL top. If the buoyancy flux is primarily driven by the temperature flux, these buoyancy-flux generating processes should be the same for the lower boundary layers over land and ocean. The results of the scale analysis of the buoyancy flux agree well with those obtained for mesoscale cellular convection during the Air-Mass Transformation Experiment.

Chou, Shu-Hsien↗

Subsonic natural-laminar-flow airfoils

An account is given of the development history of natural laminar-flow (NLF) airfoil profiles under guidance of an experimentally well-verified theoretical method for the design of airfoils suited to virtually all subcritical applications. This method, the Eppler Airfoil Design and Analysis Program, contains a conformal-mapping method for airfoils having prescribed velocity-distribution characteristics, as well as a panel method for the analysis of potential flow about given airfoils and a boundary-layer method. Several of the NLF airfoils thus obtained are discussed.

Somers, Dan M.↗

The Compressible Laminar Boundary Layer with Fluid Injection

A solution of the equations of the compressible laminar boundary layer including the effects of transpiration cooling is presented. The analysis applies to the flow over an isothermal porous plate with a velocity of fluid injection proportional to the reciprocal of the square root of the distance from the leading edge. The effect of several flow parameters on coolant-flow rates is discussed with the aid of representative examples. A stability analysis indicates that, although transpiration cooling requires a lower surface temperature for stable flow than does internal wall cooling, this lower temperature can be obtained with a smaller expenditure of coolant.

Low, George M↗

An experimental investigation of sting-support effects on drag and a comparison with jet effects at transonic speeds

Various dummy stings were tested on the rear of a related series of afterbody shapes for Mach numbers from 0.80 to 1.10 and Reynolds numbers based on body length from 15.0 x 16 to the 6th power to 17.4 x 10 to the 6th power. A method is presented whereby approximate sting interference corrections can be made to models having afterbody shapes and sting supports similar to those of these tests if the Reynolds numbers are of the same order of magnitude and a turbulent boundary layer exists at the model base. Also presented is an analysis of jet duplication by use of a sting.

Cahn, Maurice S↗

The Martian Surface Boundary Layer

The acquisition of meteorological data from the surface of Mars by the two Viking Landers and Mars Pathfinder make it possible to estimate atmospheric boundary layer parameters and surface properties at three different locations on the planet. Because the Martian atmosphere is so thin the majority of the solar radiance is converted to heat at the surface. The difference between surface and atmospheric temperature can also constraint surface albedo, thermal inertia, and infrared emissivity. The Mars Pathfinder Atmospheric Structure Instrument/Meteorological package (ASI/MET) was the most capable weather monitoring system ever sent to the surface of another planet to date. One of the prime objectives of the ASI/MET package is to characterize the surface boundary layer parameters, particularly the heat and momentum fluxes, scaling temperature and friction velocity, and estimate surface roughness. Other important boundary layer parameters, such as Richardson Number, Monin-Obukhov length, analysis of turbulence characteristics of wind and temperature, and atmospheric stability class can also be determined from these measurements.

Wilson, G. R.↗

Cross Flow Effects on Glaze Ice Roughness Formation

The present study examines the impact of large-scale cross flow on the creation of ice roughness elements on the leading edge of a swept wing under glaze icing conditions. A three-dimensional triple-deck structure is developed to describe the local interaction of a 3 D air boundary layer with ice sheets and liquid films. A linear stability analysis is presented here. It is found that, as the sweep angle increases, the local icing instabilities enhance and the most linearly unstable modes are strictly three dimensional.

Tsao, Jen-Ching↗

Thermal and Fluids Engineering at Dryden Flight Research Center in 2008

This viewgraph presentation reviews thermal structures and fluids engineering at NASA Dryden Research Center. The contents include: 1) SOFIA; 2) In-Flight Infrared Thermography Boundary Layer Transition Measurement; 3) Thermal Testing; and 4) Aerodynamic Heating Analysis.

Kostyk, christopher↗

Cavity Heating Experiments Supporting Shuttle Columbia Accident Investigation

The two-color thermographic phosphor method has been used to map the local heating augmentation of scaled idealized cavities at conditions simulating the windward surface of the Shuttle Orbiter Columbia during flight STS-107. Two experiments initiated in support of the Columbia Accident Investigation were conducted in the Langley 20-Inch Mach 6 Tunnel. Generally, the first test series evaluated open (length-to-depth less than 10) rectangular cavity geometries proposed as possible damage scenarios resulting from foam and ice impact during launch at several discrete locations on the vehicle windward surface, though some closed (length-to-depth greater than 13) geometries were briefly examined. The second test series was designed to parametrically evaluate heating augmentation in closed rectangular cavities. The tests were conducted under laminar cavity entry conditions over a range of local boundary layer edge-flow parameters typical of re-entry. Cavity design parameters were developed using laminar computational predictions, while the experimental boundary layer state conditions were inferred from the heating measurements. An analysis of the aeroheating caused by cavities allowed exclusion of non-breeching damage from the possible loss scenarios being considered during the investigation.

Everhart, Joel L.↗

Study of Antarctic Blowing Snow Storms Using MODIS and CALIOP Observations With a Machine Learning Model

As a common phenomenon over Antarctica, blowing snow (BLSN), especially the large BLSN storms, play an important role in the Antarctic surface mass balance, radiation budget, and planetary boundary layer processes. This study presents the work on BLSN storm identification and analysis with observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the Aqua satellite. Spectral analysis shows that BLSN identification is feasible with MODIS daytime data. A random forest machine learning model is developed and observations from the Cloud‐Aerosol Lidar with Orthogonal Polarization are used for training. Model performance results show that machine‐learning based classification can achieve over 90% overall accuracy when classifying MODIS pixels into cloud, clear, and BLSN categories. The machine learning model is applied to MODIS observations during the month of October 2009 for BLSN storm analysis. Results show that the size of BLSN storms has a large spectrum and can reach hundreds of thousands km2. The MODIS based BLSN storm frequency map extends the Cloud‐Aerosol Lidar and Infrared Pathfinder Satellite Observations coverage limit from 82°S to the South Pole. A BLSN storm belt, which extends from the South Pole region to the coastal area between 130°E and 160°E along the Transantarctic Mountains, provides a potential pathway of snow transport. These results are important in improving the understanding of BLSN impact on Antarctic surface mass balance and boundary layer processes.

Antarctic↗

Characterizing Seasonal Variation of the Atmospheric Mixing Layer Height Using Machine Learning Approaches

As machine learning becomes more integrated into atmospheric science, XGBoost has gained popularity for its ability to assess the relative contributions of influencing factors in the atmospheric boundary layer height. To examine how these factors vary across seasons, a seasonal analysis is necessary. However, dividing data by season reduces the sample size, which can affect result reliability and complicate factor comparisons. To address these challenges, this study replaces default parameters with grid search optimization and incorporates cross-validation to mitigate dataset limitations. Using XGBoost with four years of data from the atmospheric radiation measurement (ARM) (Southern Great Plains (SGP) C1 site, cross-validation stabilizes correlation coefficient fluctuations from 0.3 to within 0.1. With optimized parameters, the R value can reach 0.81. Analysis of the C1 site reveals that the relative importance of different factors changes across seasons. Lower tropospheric stability (LTS, ~0.53) is the dominant factor at C1 throughout the year. However, during DJF, latent heat flux (LHF, 0.44) surpasses LTS (0.22). In SON, LTS (0.58) becomes more influential than LHF (0.18). Further comparisons among the four long-term SGP sites (C1, E32, E37, and E39) show seasonal variations in relative importance. Notably, during JJA, the differences in the relative importance of the three factors across all sites are lower than in other seasons. This suggests that boundary layer development in the summer is not dominated by a single factor, reflecting a more intricate process likely influenced by seasonal conditions such as enhanced convective activity, higher temperatures, and humidity, which collectively contribute to a balanced distribution of parameter impacts. Furthermore, the relative importance of LTS gradually increases from morning to noon, indicating that LTS becomes more significant as the boundary layer approaches its maximum height. Consequently, the LTS in the early morning in autumn exhibits greater relative importance compared to other seasons. This reflects a faster development of the mixing layer height (MLH) in autumn, suggesting that it is easier to retrieve the MLH from the previous day during this period. The findings enhance understanding of boundary layer evolution and contribute to improved boundary layer parameterization.

54 ENVIRONMENTAL SCIENCES↗

Boundary-Layer Transition Prediction Through Loose Coupling of OVERFLOW and LASTRAC

Transition prediction based on linear stability theory is expected to more accurately reflect the causality of transition onset than phenomenological transition models based on RANS-like transport equations. To help achieve the CFD vision 2030 aim of building a CFD tool chain with automated prediction of boundary layer transition, a technique to loosely tie the NASA OVERFLOW CFD solver with the LASTRAC stability analysis tool is described. The coupled solver is then used to compute transition over selected over a flat plate in a freestream with sufficiently low levels of turbulence, NLF(1)-0416 airfoil, the 6:1 prolate spheroid at an angle of attack, and a NASA juncture flow model with symmetric wing configuration. The findings show that the loosely coupled approach can reliably predict the transition location accurately in scenarios that are dominated by a single transition mechanism involving Tollmien-Schlichting instabilities, crossflow instabilities, or separation bubble-induced transition, or include a mixture of selected mechanisms. The toolset presents here appears to be robust to the prescription of the initial transition location, and it can lead to a converged solution in four or five rounds of the mean flow calculation and stability analysis, with minimal input from the user.

boundary layer transition↗

Computational analysis of ramjet engine inlet interaction

A computational analysis of a ramjet engine at Mach 3.5 has been conducted and compared to results obtained experimentally. This study focuses on the behavior of the inlet both with and without combustor backpressure. Increased backpressure results in separation of the body side boundary layer and a resultant static pressure rise in the inlet throat region. The computational results compare well with the experimental data for static pressure distribution through the engine, inlet throat flow profiles, and mass capture. The computational analysis slightly underpredicts the thickness of the engine body surface boundary layer and the extent of the interaction caused by backpressure; however, the interaction is observed at approximately the same level of backpressure both experimentally and computationally. This study demonstrates the ability of two different Navier-Stokes codes, namely RPLUS and PARC, to calculate the flow features of this ramjet engine and to provide more detailed information on the process of inlet interaction and unstart.

Duncan, Beverly↗

Southern Ocean Uptake in the MPAS-Ocean Model

The research added to the understanding of Southern Ocean Uptake in the following ways. 1) No single process in the model could be “tuned” to improve Southern Ocean uptake of heat, CO 2 and CFCs. 2) More comprehensive studies revealed that multiple aspects of the model are important; in particular the general circulation control of deep (>200m) stratification (Small et al., 2019) and salinity contributions to the shallow (< 200 m) stratification (DuVivier et al, 2018). These two aspects are not strongly connected. The first can be very much improved by increasing horizontal resolution, primarily because of more transport of high salinity water from the Indian Ocean into the Southern Ocean south of Africa, so we now know that “parameterizing” this salinity source will be one necessary step to improving the Southern Ocean uptake at low resolution. 3) However, the second was found to be more than just a resolution issue, which may explain why many studies have found that higher resolution improves only some aspects of model solutions, but degrades others. Even in cases where the surface wind is too strong, the shallow stratification is sufficient to inhibit vertical mixing even though the salinity stabilization is weak compared to observations. The conclusion is that the process responsible for mixing through the stable salinity barrier above 200m is missing from the model. Therefore, a second necessary step is to find the process then incorporate it into the model. The project focused on ocean surface wave driven Langmuir turbulence as the source of additional mixing by studying Large Eddy Simulations (LES) of Southern Ocean boundary layers as they eroded a realistic salinity barrier. The wind, buoyancy and wave driven boundary layer turbulence was found to be well described by Monin-Obukhov similarity by developing similarity functions of the wave driving, and combining these with the established wind and buoyancy functions (Large et al., 2018a). These functions and a novel analysis of the momentum flux and vertical shear fields from the LES revealed two distinct aspects where the boundary layer turbulence was much more organized than expected, and hence much more amenable to implementation in the model (Large et al., 2018b). First, there is a robust non-local across-shear transport of momentum throughout the ocean boundary layer; a hitherto missing process. Furthermore, this transport is related to the across-shear component of the wind stress in the same way that non-local buoyancy transport is related to the surface buoyancy flux, both in the ocean and atmosphere. Even the coefficients are similar in the convective limit. Second, the turbulent fluxes of momentum and buoyancy are distributed through the ocean boundary layer of the LES in a very orderly fashion given by a single shape function that appears to be applicable to both momentum and buoyancy, with or without surface wave driving. Thus, a very technically effective and economic path to incorporating surface wave driving in the vertical mixing scheme of the model is now clear. The high degree of order found for ocean boundary layer turbulence, including Langmuir turbulence, is more amenable to empirical models than to statistical turbulence models, and the computational cost is very much less. Fortuitously, the empirical K-Profile Parameterization is already implemented in the model and the wave-driving similarity function, the non-local momentum transport and the vertical shape function are straightforward enhancements.

58 GEOSCIENCES↗

Highly Efficient Design-of-Experiments Methods for Combining CFD Analysis and Experimental Data

It is the purpose of this study to examine the impact of "highly efficient" Design-of-Experiments (DOE) methods for combining sets of CFD generated analysis data with smaller sets of Experimental test data in order to accurately predict performance results where experimental test data were not obtained. The study examines the impact of micro-ramp flow control on the shock wave boundary layer (SWBL) interaction where a complete paired set of data exist from both CFD analysis and Experimental measurements By combining the complete set of CFD analysis data composed of fifteen (15) cases with a smaller subset of experimental test data containing four/five (4/5) cases, compound data sets (CFD/EXP) were generated which allows the prediction of the complete set of Experimental results No statistical difference were found to exist between the combined (CFD/EXP) generated data sets and the complete Experimental data set composed of fifteen (15) cases. The same optimal micro-ramp configuration was obtained using the (CFD/EXP) generated data as obtained with the complete set of Experimental data, and the DOE response surfaces generated by the two data sets were also not statistically different.

Anderson, Bernhard H.↗