Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “behavioral sciences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Converging towards atomic and nuclear pressures (Final Report)

his report details the development of transformational tools and techniques, allowing the accurate characterization of matter at the most extreme conditions yet studied in the high energy density (HED) domain. Before this work, most experiments quantitatively mapping the nature of matter in the HED realm were performed using planar geometry, which allows for the isolation and measurement of variables in a single thermodynamic state. Such measurements include equation of state variables, optical conductivity, heat transport and more. However, due to a variety of plasma processes, such experiments are limited to below ~10 TPa (100 Mbar) pressures. To achieve higher pressures, convergent experiments are needed. Historically, convergent experiments have not been used for benchmark data because they are integral measurements. That is each part of a convergent target undergoes a time dependent wide range of states, making it difficult to accurately isolate any particular quantity for a given thermodynamic state. This effort developed innovative convergent HED platforms and techniques enabling the exploration of matter from atomic to nuclear scale pressures. This effort also performed pioneering experiments that yielded the first rigorous benchmark data at these extreme conditions. This funding award began with the overarching goal to understand the behavior of matter at extreme (atomic-to-nuclear scale) pressures. The motivation for these goals lie in the fact that every time scientists explore matter beyond the threshold of an atomic unit, there is a fundamental shift in science. The atomic unit for energy, mass, charge, length, and time have each been explored, and each time such a threshold was crossed, a new sequence of discoveries was made resulting in significant awards such as the Nobel Prize. The only unexplored atomic unit is pressure, and this effort set the course for exploring matter at and beyond such pressures. That most of the recently discovered extrasolar planets and stars, as well as matter in the late implosion stages of inertial fusion targets, have deep internal pressures at and beyond atomic pressures amplifies the importance of this effort. Much of the initial work in developing techniques to create these atomic-to-nuclear pressures already existed within the HED community, predominantly at large scale laser facilities such as the National Ignition Facility (NIF) and the Omega60 laser the University of Rochester and although these experiments were routinely performed the ability to extract information about the underlying physical states and processes remained elusive due to the complexity of the experiments, extreme scales in both time and space, and the integrated nature of all the measurements. This work built a rigorous framework so such measurements can routinely be made. This was done in part through the introduction of Bayesian inference techniques into the field of HED science. These techniques allow for the self-consistent extraction of the relevant variables and their explicit and implicit correlations, so as to make use of integrated experimental data to constrain physical models and provide accurate uncertainty bounds for the data. The techniques developed here are fully transparent and proved immediately useful providing quantitative rigorous benchmarks for physical states and processes at some of the most extreme conditions yet explored on Earth. This funding is directly or partly responsible for 7 publications in major peer-reviewed scientific journals, a doctoral thesis, 3 invited talks at major conferences, and the training of a post-doc, 2 graduate students, and 1 undergraduate student. Beyond the effort supported by this award launched the introduction of Bayesian inference into the HED physics community and helped push the usage if modern data-science techniques within the physics community at large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling behavior and giant field enhancement of the thermal conductivity in the honeycomb antiferromagnet BaCo 2⁢ (AsO 4 ) 2

The layered honeycomb material BaCo 2 (AsO 4 ) 2 is of topical interest because its magnetic state is related to that of the Kitaev magnet α-RuCl 3 . Using thermal transport to probe how magnetic excitations interact with phonons in the magnetically disordered regime, we have uncovered an unusually large enhancement of the thermal conductivity κ xx in an in-plane magnetic field H. Just above the Néel temperature T N , a field of 13 T increases κ xx by a factor of ∼ 211, which is very large compared to other magnetic insulators. Interestingly, κ xx (H, T) exhibits a scaling behavior in the entire magnetically disordered region that surrounds the ordered zigzag state. The ratio Δκ xx (H, T)/κ xx (13, T), measured throughout the disordered region, collapses to a one-parameter scaling function exp(−1/gx) (where x = μ B B/k B T and g is a constant).

36 MATERIALS SCIENCE↗

Imaging of a van der Waals spin-orbit torque system using spin ensembles in hBN

Recently, optically active spin defects embedded in two-dimensional (2D) van der Waals (vdW) crystals have emerged as a transformative quantum sensing platform to explore cutting-edge materials science. Taking advantage of excellent solid-state integrability, this new class of spin defects can be readily arranged in nanoscale proximity to target materials, showing great promise for realizing in-situ quantum sensing of microscopic spin and charge behaviors in vdW heterostructures. Here we report hexagonal boron nitride-based quantum imaging of field-free deterministic magnetic switching and electric current distributions in an all-vdW spin-orbit torque (SOT) system. By visualizing variations of nanoscale magnetic stray field profile of room-temperature 2D magnet Fe 3 GaTe 2 under different SOT conditions, we show how the magnetic switching evolves from deterministic to stochastic behavior due to the interplay between spin orientations, anisotropy and Joule heating. Micromagnetic simulations rationalize our results well, revealing the role of field-like SOT in inhibiting thermal fluctuation driven stochastic switching and chaotic multi-domain competition. This understanding, which is otherwise difficult to access by conventional transport measurements, offers valuable insights into material design, testing, and performance evaluation of next-generation vdW spintronic devices.

Imaging techniques↗

Creating and Interfacing Designer Chemical Qubits (Final Technical Report)

The Final Technical Report describes a multi‑institution effort to develop programmable molecular qubits as precision quantum sensors for probing quantum materials. The team created chemically tunable qubits with optical addressability and practical coherence, integrated them into thin films and frameworks while preserving functionality, and established new magnetic and electric sensing methods suited to two‑dimensional magnets, ferroelectrics, and multiferroics. They also built computational models and spectroscopic tools that connect molecular design to material behavior, enabling access to quantum phenomena that previously could not be measured. The project produced more than 40 publications and trained a large cohort of graduate students and postdocs, strengthening the workforce and infrastructure needed for DOE's quantum information science mission.

2D Quantum Materials↗

Photophysics and Spin-Physics Studies on Persistent Upconversion Luminescence from Nonlinearly Polarizable Ferroelectric-Like Lattice Prepared by Orderly Packing Donor–Acceptor Structures under Multiphoton Excitation

The ultralong-lived upconversion luminescence with the lifetime of 0.48 s in a broad spectral range (530–650 nm) is observed in CD49 (9-(3-(5-bromopyridin-3-yl)prop-2-yn-1-yl)-9H-carbazole) crystal designed with donor–acceptor (carbazole–pyridine) structures under infrared excitation, simultaneously accompanied with second harmonic generation (SHG). This phenomenon indicates orderly packing donor–acceptor structures form a nonlinearly polarizable ferroelectric-like lattice with ultralong-lived light-emitting states, leading to much prolonged nonlinear optical behaviors. The persistent upconversion luminescence together with SHG is largely reduced when lowering crystallinity. This implies that nonlinearly polarizable ferroelectric-like lattice provides the necessary condition to generate persistent upconversion luminescence. Evidently, persistent upconversion luminescence becomes completely lacking when only using ultralong-lived light-emitting states without nonlinearly polarizable ferroelectric-like lattice, exampled by 4-(dimethylamino)benzonitrile dispersed in polyvinyl alcohol matrix. Magneto-photoluminescence shows that persistent upconversion luminescence is essentially a super-delayed fluorescence from crystalline intermolecular charge-transfer excitons formed in the nonlinearly polarizable ferroelectric-like lattice. Magnetodielectrics indicate crystalline intermolecular charge-transfer excitons are coupled with nonlinearly polarizable ferroelectric-like lattice, leading to prolonged nonlinear optical behaviors shown as persistent upconversion luminescence through super delayed fluorescence. In conclusion, therefore, crystalline intermolecular charge-transfer excitons formed in nonlinearly polarizable ferroelectric-like lattice provide an interesting platform to generate prolonged nonlinear optical behaviors toward developing persistent upconversion luminescence under multiphoton excitation.

36 MATERIALS SCIENCE↗

Interactions Enhance Ramp Reversal Memory in Locally Phase Separated Materials

The ramp-reversal memory (RRM) effect in metal–insulator transition metal oxides (TMOs), a non-volatile resistance change induced by repeated temperature cycling, has attracted considerable interest in neuromorphic computing and non-volatile memory devices. Our previous defect motion model successfully explained RRM in vanadium dioxide (VO 2 ), capturing observed critical temperature shifts and memory accumulation throughout the sample. However, this approach lacked interactions between metallic and insulating domains. Here, we extend our model by combining a correlated Random Field Ising Model with defect diffusion-segregation, enabling accurate hysteresis modeling while predicting the relationship between RRM and domain interactions. Our simulations demonstrate that the maximum RRM occurs when the turnaround temperature approaches the inflection point. This peak in RRM vs. turnaround temperature is consistent with prior transport measurements, as well as our own optical measurements reported here. Significantly, we find that increasing nearest-neighbor interactions enhances the maximum memory effect, thus providing a clear mechanism for optimizing RRM performance. Since our model employs minimal assumptions, we predict that RRM should be a widespread phenomenon in materials exhibiting patterned phase coexistence of electronic domains. This work not only advances fundamental understanding of memory behavior in TMOs but also establishes a much-needed theoretical framework for optimizing device applications.

36 MATERIALS SCIENCE↗

Male mating season range expansion results from an increase in scale of daily movements for a polygynous–promiscuous bird

Abstract Males of species with promiscuous mating systems are commonly observed to use larger ranges during the mating season relative to non‐mating seasons, which is often attributed to a change in movements related to reproductive activities. However, few studies link seasonal range sizes to variation in daily space use patterns to provide insight into the behavioral mechanisms underlying mating season range expansion. We studied 20 GPS‐tagged male wild turkeys ( Meleagris gallopavo ), a large upland gamebird, during the mating and summer non‐mating seasons to test the hypothesis that larger mating season ranges resulted from male wild turkeys expanding the scale of daily movement activities to locate and court females. We delineated mating and non‐mating seasons based on intensity of gobbling, a vocalization tied to courtship behavior, recorded by autonomous recording units distributed across the study area. Mating season ranges were significantly larger than non‐mating season ranges. Daily ranges were larger in the mating season, as were distances between roost sites used on consecutive nights. Variance in daily range size was greater in the mating season, but low temporal autocorrelation suggested considerable daily variability in both seasons. We found no evidence that male wild turkeys changed how they distributed daily movements within seasonal ranges, or differences in habitat use, suggesting larger mating season ranges result from male wild turkeys increasing the scale of their daily movements, rather than a systematic shift to a nomadic movement strategy. Likely, the distribution of females is more dynamic and ephemeral compared to other resources, prompting males to traverse larger daily ranges during the mating season to locate and court females. Our work illustrates the utility of using daily movement to understand the behavioral process underlying larger space use patterns.

59 BASIC BIOLOGICAL SCIENCES↗

Exploring the role of electronic structure on photo-catalytic behavior of carbon-nitride polymorphs

A fully self-consistent density-functional theory (DFT) with improved functionals is used herein to provide a comprehensive account of structural, electronic, and optical properties of C 3 N 4 polymorphs. Using our recently developed van Leeuwen-Baerends (vLB) corrected local-density approximation (LDA), we implemented LDA + vLB within full-potential N th -order muffin-tin orbital (FP-NMTO) method and show that it improves structural properties and band gaps compared to semi-local functionals (LDA/GGA). We demonstrate that the LDA + vLB predicts band-structure and work-function for well-studied 2D-graphene and bulk-Si in very good agreement with experiments, and more exact hybrid functional (HSE) calculations as implemented in the Quantum-Espresso (QE) package. The structural and electronic-structure (band gap) properties of C 3 N 4 polymorphs calculated using FP-NMTO-LDA + vLB is compared with more sophisticated hybrid-functional calculations. We also perform detailed investigation of photocatalytic behavior using QE-HSE method of C 3 N 4 polymorphs through work-function, band (valence and conduction) position with respect to water reduction and oxidation potential. Our results show $γ$-C 3 N 4 as the best candidate for photocatalysis among all the C 3 N 4 polymorphs but it is dynamically unstable at ‘zero’ pressure. We show that $γ$-C 3 N 4 can be stabilized under hydrostatic-pressure, which improves its photocatalytic behavior relative to water reduction and oxidation potentials.

36 MATERIALS SCIENCE↗

Enhanced ductility in in-layer glass-carbon fiber/epoxy hybrid composites produced via tailored fiber placement

Experimental mechanical property results of composite materials with hybrid reinforcements (commingled glass and carbon fibers) are detailed and compared with single-fiber composite properties. In-layer hybrid materials, with carbon and glass fiber tows laid side-by-side, were produced via tailored fiber placement (TFP) technology. Detailed experiments showed a phenomenon of “enhanced ductility” of carbon fiber in the hybrid composites of 12–24% relative to an all-carbon fiber composite and multiple stress–strain peaks were observed. Here, this enhanced ductility was hypothesized to be due to the glass fibers mitigating the shock waves arising from the initial failures of carbon fibers, and preventing the premature failure of the remaining carbon fibers. A novel way to engineer the stress–strain behavior of a hybrid composite to achieve a metal-like ductile response (plateau of stress–strain behavior, often termed “elastic–plastic deformation”) was demonstrated by carefully selecting the type and composition of carbon and glass fiber materials.

36 MATERIALS SCIENCE↗

A method to generate heating and cooling schedules based on data from connected thermostats

Internet-connected thermostats are a promising new source of temperature and operational data in homes because they record inside temperatures, setpoints, and HVAC runtimes every five minutes. Over 20 million Internet-connected thermostats have already been installed in American homes. Data from about 20,000 connected thermostats were collected and organized by climate zone, number of occupants, floor area, and day type. A method was developed to create up to 40 representative temperature schedules which, together, can more accurately capture the diversity of heating and cooling behaviors. These results are suitable for input into schedules for building energy simulation models. This information enables more realistic simulations of American heating and cooling behavior, leading to more accurate estimates of energy consumption and savings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Modular performance prediction for scientific workflows using Machine Learning

Scientific workflows provide an opportunity for declarative computational experiment design in an intuitive and efficient way. A distributed workflow is typically executed on a variety of resources, and it uses a variety of computational algorithms or tools to achieve the desired outcomes. Such a variety imposes additional complexity in scheduling these workflows on large scale computers. As computation becomes more distributed, insights into expected workload that a workflow presents become critical for effective resource allocation. In this paper, we present a modular framework that leverages Machine Learning for creating precise performance predictions of a workflow. The central idea is to partition a workflow in such a way that makes the task of forecasting each atomic unit manageable and gives us a way to combine the individual predictions efficiently. We recognize a combination of an executable and a specific physical resource as a single module. This gives us a handle to characterize workload and machine power as a single unit of prediction. Overall, our modular technique of creating atomic modules and deployment of longest-path approach to estimate workflow performance, allows the framework to adapt to highly complex nested directed acyclic workflows and scale to new scenarios, since it does not make assumptions of underlying workflow structure. We present performance estimation results of independent workflow modules executed on the XSEDE SDSC Comet cluster using various Machine Learning algorithms. The results provide insights into the behavior and effectiveness of different algorithms in the context of scientific workflow performance prediction.

97 MATHEMATICS AND COMPUTING↗

Size effect in stainless steel thin wires under tension

Miniaturization of modern devices drives the exploration into how materials behave in small dimensions. However, the mechanical behaviors of micro-scale specimens under varied loading conditions are still challenging to characterize and predict. In this work, specimen size-dependent weakening effect was experimentally revealed in 316L stainless steel thin wires under tension with wire diameter decreasing from 200 μm down to 61 μm. The underlying mechanisms were primarily associated with surface grain softening and strain localization, which were largely dependent on the number of grains across wire diameter. Through an analog composite model with surface and interior grains that follows the Hall-Petch relation, the extent of surface grain softening was found to coincide with the flow stress reduction due to lack of boundary strengthening. Further using elasto-plastic self-consistent polycrystal modeling, the stress-strain behaviors of interior and surface grains were well described in analogy to those of bulk materials with similar-size grains and extremely large grains, respectively. Subsequently, the analog composite model well simulated the specimen size-dependent weakening effect under tension. This article provided more insights into the size effect exploration and proposed a practical model for describing size-dependent mechanical behaviors of small-scale materials to be applied to miniaturized devices.

316L stainless steel↗

Characterization of precipitation in gradient Inconel 718 superalloy

Inconel 718 (IN718) superalloy is a well-established material for the application of aircraft engine and power generator due to its excellent performance at high temperatures. The outstanding mechanical properties of IN718 are largely determined by the precipitates. Here, we investigated the precipitation behaviors and the corresponding mechanical properties of the heat-treated gradient IN718 alloy. The microscopy studies reveal that high-density hexagonal η phase with chemistry of Ni 3 (Al,Ti,Nb) formed in the nanograined IN718 alloy after annealing at 700 °C. Additionally, the compressive stress introduced during severe plastic deformation may have prohibited the formation of γ” phase while accelerated the precipitation of γ’ phase, consequently favoring the precipitation of η phase. The corresponding evolution of mechanical behavior of gradient IN718 alloy is investigated.

36 MATERIALS SCIENCE↗

Numerical simulation of NSLS-II fast orbit feedback system

We discuss recent work on the construction of a numerical simulation of the fast orbit feedback system at NSLS-II. The simulation operates in the time domain and also includes the spatial domain, i.e. all beam position monitors (BPMs) and correctors. It can accept inputs of the real beam orbit and the measured orbit response matrix. It can also add errors to every stage of the calculation. We present methods to verify the simulation results by comparing the simulation results with experimental data collected at NSLS-II. The results are in very good agreement. The effects of errors from BPMs and correctors, as well as the amplitude of excitation, on the feedback performance, are also explored. This simulation can be used to predict the behavior and performance of the system for a future upgrade.

36 MATERIALS SCIENCE↗

Mechanical Properties of 2D LiInP 2 Se 6 : Implication for Semiconductor Applications

Metal phosphorus trichalcogenides (MPTCs) are emerging 2D semiconductor materials with unique functional properties that set them apart from other 2D systems. Despite the importance of their mechanical properties for improving the semiconductor device’s durability and performance, as well as for utilizing strain effects to customize material properties and create new functionality, our current understanding of MPTCs’ mechanical behavior is lacking and lags behind our knowledge of their other properties. Here, we use LiInP 2 Se 6 as a model example of MPTCs and report the first experimental measurements of the elastic and plastic (fracture) properties along both in-plane and out-of-plane directions by atomic force microscopy and nanoindentation. Being a 2D material that is entirely inorganic, LiInP 2 Se 6 surprisingly exhibits mechanical properties that resemble those of hybrid organic–inorganic materials rather than pure inorganic 2D materials. It has a soft crystal structure with low elastic moduli, a low difference in in-plane vs out-of-plane mechanical properties, and a combination of elastic and plastic characteristics of hybrid organic–inorganic materials. Furthermore, our work provides the mechanical information critically needed to mitigate and/or harness the strain effects in LiInP 2 Se 6 -based semiconductor devices and sheds light on the mechanical behaviors of MPTCs with indispensable insights.

2D semiconductor↗

Confined Crystal Melting in Edgeless Poly( L -lactic acid) Crystalsomes

Polymer single crystals tend to be quasi two-dimensional (2D) lamellae and their small lateral surfaces are the starting points of lamella melting and thickening. However, the recently discovered crystalsomes, which are defined for hollow single crystal-like spherical shells, are edgeless, self-confined, and incommensurate with translational symmetry. Here, this work concerns the structure and melting behavior of these edgeless crystalsomes. Poly(l-lactic acid) crystalsomes were grown using a miniemulsion solution crystallization method. Differential scanning calorimetry and in situ wide-angle X-ray diffraction were used to follow the structural evolution of the crystalsomes upon heating. Our results demonstrated that the structure and melting behavior of crystalsomes are curvature-dependent and significantly different from their flat crystal counterpart.

36 MATERIALS SCIENCE↗