Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Polypropylene Composites Reinforced With Recycled Waste Cellulosic Fiber/Fine Mixture: The Impact of Cellulose Sieving on Performance

This study explores how a sieving step of waste cellulosic fiber and fine (WCFF) mixture affects the performance of WCFF‐loaded polypropylene (PP) composites and whether the separation of fines from fibers offers an added benefit. The WCFF samples were downsized, and four different filler size ranges were sieved using a series of mesh sizes from 4 to 0.85 mm. The WCFF/PP composites were then compounded at 20 wt.% loading of WCFF using a twin‐screw extruder. Incorporating WCFF increased the tensile strength to 41.28 MPa and the modulus to 3207 MPa, accounting for 28% and 38% enhancements, respectively. Interestingly, the greatest improvements were associated with the nonsieved WCFF case, and the sieved WCFF fibers provided only marginal enhancements over virgin PP. The outperformance of nonsieved WCFF was attributed to the synergistic reinforcement of hybrid fibers and fines as well as the maintenance of longer fibers in the system. However, the strain at break and impact strength of PP decreased after introducing WCFF. Moreover, the complex viscosity and storage modulus increased with an increase in the filler size, due to the formation of a more effective percolative network. The PP's crystallinity exhibited a relatively strong dependency on the sieving, where WCFF samples with short‐aspect‐ratio fillers promoted the crystallinity significantly. It was also found that the WCFF degradation onset temperature increased once it was incorporated into PP. This study suggests that waste cellulosic feedstocks can be utilized as a reinforcement without additional sieving to manufacture high‐performance and cost‐effective composites.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Critical Role of Reductive Steps in the Nickel-Catalyzed Hydrogenolysis and Hydrolysis of Aryl Ether C-O Bonds

Hydrogenolysis of the aromatic C-O bond in aryl ethers is catalyzed by Ni in decalin or water at 150 °C. Observations of a significant kinetic isotope effect (kH/kD = 5.7) for the reactions of diphenyl ether under H2 and D2 and a positive dependence of the rate on H2 chemical potential in decalin indicate that addition of H to the aromatic ring is the rate-limiting step rather than C-O scission. Hydrogen addition occurs on the metal before C-O bond scission. DFT calculations indicate that hydrogen atom addition to the ortho position followed by C-O scission is energetically more feasible than C-O scission followed by H addition to either phenoxyl or phenyl moieties. Hydrogenolysis initiated via H addition in water is more selective (~75 %) compared to reactions in decalin (~30 %). The high selectivity for hydrogenolysis is attributed to stabilization of polar transition state by water as a polar solvent.

Wang, Meng↗
DOE OSTI2020

High Compression‐Induced Conductivity in a Layered Cu–Br Perovskite

Abstract We show that the onset pressure for appreciable conductivity in layered copper‐halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu–Cl perovskites require pressures >50 GPa to show a conductivity of 10 −4 S cm −1 , whereas here a Cu–Br congener, (EA) 2 CuBr 4 (EA=ethylammonium), exhibits conductivity as high as 2×10 −3 S cm −1 at only 2.6 GPa, and 0.17 S cm −1 at 59 GPa. Substitution of higher‐energy Br 4p for Cl 3p orbitals lowers the charge‐transfer band gap of the perovskite by 0.9 eV. This 1.7 eV band gap decreases to 0.3 eV at 65 GPa. High‐pressure X‐ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression‐induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression‐induced conductivity of Cu‐halide perovskites to more technologically accessible pressures.

Jaffe, Adam↗
DOE OSTI2020

Understanding the Origin of Highly Selective CO 2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Abstract Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO 2 electroreduction (CO 2 R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO 2 reduction (CO 2 R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO 2 R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.

Koshy, David M.↗
DOE OSTI2020

Supramolecular Tuning Enables Selective Oxygen Reduction Catalyzed by Cobalt Porphyrins for Direct Electrosynthesis of Hydrogen Peroxide

Abstract We report a supramolecular strategy for promoting the selective reduction of O 2 for direct electrosynthesis of H 2 O 2 . We utilized cobalt tetraphenylporphyrin (Co‐TPP), an oxygen reduction reaction (ORR) catalyst with highly variable product selectivity, as a building block to assemble the permanently porous supramolecular cage Co‐PB‐1(6) bearing six Co‐TPP subunits connected through twenty‐four imine bonds. Reduction of these imine linkers to amines yields the more flexible cage Co‐rPB‐1(6). Both Co‐PB‐1(6) and Co‐rPB‐1(6) cages produce 90–100 % H 2 O 2 from electrochemical ORR catalysis in neutral pH water, whereas the Co‐TPP monomer gives a 50 % mixture of H 2 O 2 and H 2 O. Bimolecular pathways have been implicated in facilitating H 2 O formation, therefore, we attribute this high H 2 O 2 selectivity to site isolation of the discrete molecular units in each supramolecule. The ability to control reaction selectivity in supramolecular structures beyond traditional host–guest interactions offers new opportunities for designing such architectures for a broader range of catalytic applications.

Smith, Peter T.↗
DOE OSTI2020

Rapid Generation of Hierarchically Porous Metal–Organic Frameworks through Laser Photolysis

Abstract Hierarchically porous metal–organic frameworks (HP‐MOFs) facilitate mass transfer due to mesoporosity while preserving the advantage of microporosity. This unique feature endows HP‐MOFs with remarkable application potential in multiple fields. Recently, new methods such as linker labilization for the construction of HP‐MOFs have emerged. To further enrich the synthetic toolkit of MOFs, we report a controlled photolytic removal of linkers to create mesopores within microporous MOFs at tens of milliseconds. Ultraviolet (UV) laser has been applied to eliminate “photolabile” linkers without affecting the overall crystallinity and integrity of the original framework. Presumably, the creation of mesopores can be attributed to the missing‐cluster defects, which can be tuned through varying the time of laser exposure and ratio of photolabile/robust linkers. Upon laser exposure, MOF crystals shrank while metal oxide nanoparticles formed giving rise to the HP‐MOFs. In addition, photolysis can also be utilized for the fabrication of complicated patterns with high precision, paving the way towards MOF lithography, which has enormous potential in sensing and catalysis.

Wang, Kun‐Yu↗
DOE OSTI2020

Directing the Rate‐Enhancement for Hydronium Ion Catalyzed Dehydration via Organization of Alkanols in Nanoscopic Confinements

Abstract Alkanol dehydration rates catalyzed by hydronium ions are enhanced by the dimensions of steric confinements of zeolite pores as well as by intraporous intermolecular interactions with other alkanols. The higher rates with zeolite MFI having pores smaller than those of zeolite BEA for dehydration of secondary alkanols, 3‐heptanol and 2‐methyl‐3‐hexanol, is caused by the lower activation enthalpy in the tighter confinements of MFI that offsets a less positive activation entropy. The higher activity in BEA than in MFI for dehydration of a tertiary alkanol, 2‐methyl‐2‐hexanol, is primarily attributed to the reduction of the activation enthalpy by stabilizing intraporous interactions of the C β ‐H transition state with surrounding alcohol molecules. Overall, we show that the positive impact of zeolite confinements results from the stabilization of transition state provided by the confinement and intermolecular interaction of alkanols with the transition state, which is impacted by both the size of confinements and the structure of alkanols in the E1 pathway of dehydration.

Shetty, Manish↗
DOE OSTI2021

Accurate Determination of the Quantity and Spatial Distribution of Counterions around a Spherical Macroion

Abstract The accurate distribution of countercations (Rb + and Sr 2+ ) around a rigid, spherical, 2.9‐nm size polyoxometalate cluster, {Mo 132 } 42− , is determined by anomalous small‐angle X‐ray scattering. Both Rb + and Sr 2+ ions lead to shorter diffuse lengths for {Mo 132 } than prediction. Most Rb + ions are closely associated with {Mo 132 } by staying near the skeleton of {Mo 132 } or in the Stern layer, whereas more Sr 2+ ions loosely associate with {Mo 132 } in the diffuse layer. The stronger affinity of Rb + ions towards {Mo 132 } than that of Sr 2+ ions explains the anomalous lower critical coagulation concentration of {Mo 132 } with Rb + compared to Sr 2+ . The anomalous behavior of {Mo 132 } can be attributed to majority of negative charges being located at the inner surface of its cavity. The longer anion–cation distance weakens the Coulomb interaction, making the enthalpy change owing to the breakage of hydration layers of cations more important in regulating the counterion–{Mo 132 } interaction.

Chen, Jiahui↗
DOE OSTI2021

Amino‐Functionalised Hybrid Ultramicroporous Materials that Enable Single‐Step Ethylene Purification from a Ternary Mixture

Abstract Pyrazine‐linked hybrid ultramicroporous (pore size <7 Å) materials (HUMs) offer benchmark performance for trace carbon capture thanks to strong selectivity for CO 2 over small gas molecules, including light hydrocarbons. That the prototypal pyrazine‐linked HUMs are amenable to crystal engineering has enabled second generation HUMs to supersede the performance of the parent HUM, SIFSIX‐3‐Zn , mainly through substitution of the metal and/or the inorganic pillar. Herein, we report that two isostructural aminopyrazine‐linked HUMs, MFSIX‐17‐Ni (17=aminopyrazine; M=Si, Ti), which we had anticipated would offer even stronger affinity for CO 2 than their pyrazine analogs, unexpectedly exhibit reduced CO 2 affinity but enhanced C 2 H 2 affinity. MFSIX‐17‐Ni are consequently the first physisorbents that enable single‐step production of polymer‐grade ethylene (>99.95 % for SIFSIX‐17‐Ni ) from a ternary equimolar mixture of ethylene, acetylene and CO 2 thanks to coadsorption of the latter two gases. We attribute this performance to the very different binding sites in MFSIX‐17‐Ni versus SIFSIX‐3‐Zn .

Mukherjee, Soumya↗
DOE OSTI2021

Precise Identification and Characterization of Catalytically Active Sites on the Surface of γ‐Alumina**

Abstract γ‐alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large‐scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ‐alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid‐state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O) 5 Al(VI)‐OH sites on the (100) segments of massively restructured (110) facets on typical rhombus‐platelet γ‐alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ‐alumina samples) responsible for its unique catalytic activity. Such (O) 5 Al(VI)‐OH sites are also present on the macroscopically defined (100) facets of γ‐alumina with elongated/rod‐like geometry. The mechanism by which these sites lose ‐OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta‐coordinate Al +3 O 5 sites is clarified. These coordinatively unsaturated penta‐coordinate Al sites produce well‐defined thermally stable Al‐carbonyl complexes. Our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ‐alumina and their role as catalytically active sites.

Khivantsev, Konstantin↗
DOE OSTI2021

Palladium/Ferrierite versus Palladium/SSZ‐13 Passive NOx Adsorbers: Adsorbate‐Controlled Location of Atomically Dispersed Palladium(II) in Ferrierite Determines High Activity and Stability**

Abstract Pd‐loaded FER and SSZ‐13 zeolites as low‐temperature passive NOx adsorbers (PNA) are compared under practical conditions. Vehicle cold start exposes the material to CO under a range of concentrations, necessitating a systematic exploration of the effect of CO on the performance of isolated Pd ions in PNA. The NO release temperature of both adsorbers decreases gradually with an increase in CO concentration from a few hundred to a few thousand ppm. This beneficial effect results from local nano‐“hot spot” formation during CO oxidation. Dissimilar to Pd/SSZ‐13, increasing the CO concentration above ≈1000 ppm improves the NOx storage significantly for Pd/FER, which was attributed to the presence of Pd ions in FER sites that are shielded from NOx. CO mobilizes this Pd atom to the NOx accessible position where it becomes active for PNA. This behavior explains the very high resistance of Pd/FER to hydrothermal aging: Pd/FER materials survive hydrothermal aging at 800 °C in 10 % H 2 O vapor for 16 hours with no deterioration in NOx uptake/release behavior. Thus, by allocating Pd ions to the specific microporous pockets in FER, we have produced (hydro)thermally stable and active PNA materials.

Khivantsev, Konstantin↗
DOE OSTI2021

Influence of Intracrystalline Ionic Strength in MFI Zeolites on Aqueous Phase Dehydration of Methylcyclohexanols

Abstract The impact of the concentration of hydrated hydronium ions and in turn of the local ionic strength in MFI zeolites has been investigated for the aqueous phase dehydration of 4‐methylcyclohexanol (E1 mechanism) and cis ‐2‐methylcyclohexanol (E2 mechanism). The E2 pathway with the latter alcohol led to a 2.5‐fold higher activity. The catalytic activity normalized to the hydronium ions (turnover frequency, TOF) passed through a pronounced maximum, which is attributed to the increasing excess chemical potential of the alcohols in the pores, increasing in parallel with the ionic strength and the additional work caused by repulsive interactions and charge separation induced by the bulky alcohols. While the maximum in rate observed is invariant with the mechanism or substitution, the reaction pathway is influencing the activation parameters differently.

Milaković, Lara↗
DOE OSTI2022

Charge Reservoirs in an Expanded Halide Perovskite Analog: Enhancing High‐Pressure Conductivity through Redox‐Active Molecules

Abstract As halide perovskites and their derivatives are being developed for numerous optoelectronic applications, controlling their electronic doping remains a fundamental challenge. Herein, we describe a novel strategy of using redox‐active organic molecules as stoichiometric electron acceptors. The cavities in the new expanded perovskite analogs (dmpz)[Sn 2 X 6 ], (X=Br − ( 1Br ) and I − ( 1I )) are occupied by dmpz 2+ ( N , N ′‐dimethylpyrazinium), with the LUMOs lying ca. 1 eV above the valence band maximum (VBM). Compressing the metal‐halide framework drives up the VBM in 1I relative to the dmpz LUMO. The electronic conductivity increases by a factor of 10 5 with pressure, reaching 50(17) S cm −1 at 60 GPa, exceeding the high‐pressure conductivities of most halide perovskites. This conductivity enhancement is attributed to an increased hole density created by dmpz 2+ reduction. This work elevates the role of organic cations in 3D metal‐halides, from templating the structure to serving as charge reservoirs for tuning the carrier concentration.

Matheu, Roc↗
DOE OSTI2022

Quantifying the Influence of Covalent Metal‐Ligand Bonding on Differing Reactivity of Trivalent Uranium and Lanthanide Complexes

Abstract Qualitative differences in the reactivity of trivalent lanthanide and actinide complexes have long been attributed to differences in covalent metal‐ligand bonding, but there are few examples where thermodynamic aspects of this relationship have been quantified, especially with U 3+ and in the absence of competing variables. Here we report a series of dimeric phosphinodiboranate complexes with trivalent f ‐metals that show how shorter‐than‐expected U−B distances indicative of increased covalency give rise to measurable differences in solution deoligomerization reactivity when compared to isostructural complexes with similarly sized lanthanides. These results, which are in excellent agreement with supporting DFT and QTAIM calculations, afford rare experimental evidence concerning the measured effect of variations in metal‐ligand covalency on the reactivity of trivalent uranium and lanthanide complexes.

Fetrow, Taylor V.↗
DOE OSTI2022

High‐Capacity Splitting of Mono‐ and Dibranched Hexane Isomers by a Robust Zinc‐Based Metal–Organic Framework

Abstract High‐efficiency separation of C 6 alkanes, particularly the mono‐ and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size‐exclusion by a microporous MOF, Zn‐tcpt (H 3 tcpt=2,4,6‐tris(4‐carboxyphenoxy)‐1,3,5‐triazine), with a two‐fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono‐ and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn‐tcpt, and the size‐exclusion based separation mechanism has been confirmed by ab initio materials modeling. The high‐efficiency separation of alkane isomers by Zn‐tcpt can be attributed to its optimal pore dimensions as well as high porosity.

Yu, Liang↗
DOE OSTI2023

pH‐ and Redox‐Responsive Pickering Emulsions Based on Cellulose Nanocrystal Surfactants

Abstract Nanoparticle surfactants (NPSs), formed by using dynamic interactions between nanoparticles and complementary ligands at the liquid‐liquid interface, have emerged as “smart emulsifiers” with attributes of high emulsification efficiency, long‐term stability, and on‐demand emulsification/demulsification capabilities. However, only pH‐responsiveness can be adopted for the assembly of reported NPSs formed by electrostatic interactions. Here, we propose an alternative design strategy, by taking advantage of the ferrocenium (Fc + ) sulfate ion pair, to develop a new type of cellulose nanocrystal (CNC) surfactant. The Fc + groups are sensitive to pH, redox reagents and voltage, imparting the CNC surfactants and derived Pickering emulsions with multi‐stimuli‐responsiveness, and showing promising applications in controllable delivery, release, and biphasic biocatalysis.

Yang, Yang↗
DOE OSTI2023

Resolving the Heat Generated from ZrO 2 Atomic Layer Deposition Surface Reactions

Abstract In situ pyroelectric calorimetry and spectroscopic ellipsometry were used to investigate surface reactions in atomic layer deposition (ALD) of zirconium oxide (ZrO 2 ). Calibrated and time‐resolved in situ ALD calorimetry provides new insights into the thermodynamics and kinetics of saturating surface reactions for tetrakis(dimethylamino)zirconium(IV) (TDMAZr) and water. The net ALD reaction heat ranged from 0.197 mJ cm −2 at 76 °C to 0.155 mJ cm −2 at 158 °C, corresponding to an average of 4.0 eV/Zr at all temperatures. A temperature dependence for reaction kinetics was not resolved over the range investigated. The temperature dependence of net reaction heat and distribution among metalorganic and oxygen source exposure is attributed to factors including growth rate, equilibrium surface hydroxylation, and the extent of the reaction. ZrO 2 ‐forming surface reactions were investigated computationally using DFT methods to better understand the influence of surface hydration on reaction thermodynamics.

Bielinski, Ashley R.↗
DOE OSTI2024

Ultrafast Formation of Charge Transfer Trions at Molecular‐Functionalized 2D MoS 2 Interfaces

Abstract In this work, we investigate trion dynamics occurring at the heterojunction between organometallic molecules and a monolayer transition metal dichalcogenide (TMD) with transient electronic sum frequency generation (tr‐ESFG) spectroscopy. By pumping at 2.4 eV with laser pulses, we have observed an ultrafast hole transfer, succeeded by the emergence of charge‐transfer trions. This observation is facilitated by the cancellation of ground state bleach and stimulated emission signals due to their opposite phases, making tr‐ESFG especially sensitive to the trion formation dynamics. The presence of charge‐transfer trion at molecular functionalized TMD monolayers suggests the potential for engineering the local electronic structures and dynamics of specific locations on TMDs and offers a potential for transferring unique electronic attributes of TMD to the molecular layers.

Jing, Yuancheng↗