Results for “ambient temperature” — Page 47

DOE OSTI2022

K 3 SbS 4 as a Potassium Superionic Conductor with Low Activation Energy for K–S Batteries

Abstract Solid‐state K‐ion conducting electrolytes are key elements to address the current problems in K secondary batteries. Here, we report a sulfide‐based K‐ion conductor K 3 SbS 4 with a low‐activation energy of 0.27 eV. W‐doped K 3− x Sb 1− x W x S 4 ( x =0.04, 0.06, 0.08, 0.10 and 0.12) compounds were also explored for increasing vacancy concentrations and improving ionic conductivity. Among them, K 2.92 Sb 0.92 W 0.08 S 4 exhibits the highest conductivity of 1.4×10 −4 S cm −1 at 40 °C, which is among the best reported potassium‐ion conductors at ambient temperature. In addition, K 2.92 Sb 0.92 W 0.08 S 4 is electrochemically stable with long‐chained potassium polysulfide of K 2 S x . A room‐temperature solid potassium–sulfur (K−S) battery system has therefore been successfully demonstrated, which is the first K−S battery prototype using non‐commercial inorganic‐based electrolyte to block the polysulfide shuttle.

Shao, Jieren↗

DOE OSTI2023

Sodium Carbazolide and Derivatives as Solid‐State Electrolytes for Sodium‐Ion Batteries

Abstract Replacing widely used organic liquid electrolytes with solid‐state electrolytes (SSEs) could effectively solve the safety issues in sodium‐ion batteries. Efforts on seeking novel solid‐state electrolytes have been continued for decades. However, issues about SSEs still exist, such as low ionic conductivity at ambient temperature, difficulty in manufacturing, low electrochemical stability, poor compatibility with electrodes, etc. Here, sodium carbazolide (Na‐CZ) and its THF‐coordinated derivatives are rationally fabricated as Na + conductors, and two of their crystal structures are successfully solved. Among these materials, THF‐coordinated complexes exhibit fast Na + conductivities, i.e., 1.20×10 −4 S cm −1 and 1.95×10 −3 S cm −1 at 90 °C for Na‐CZ‐1THF and Na‐CZ‐2THF, respectively, which are among the top Na + conductors under the same condition. Furthermore, stable Na plating/stripping is observed even over 400 h cycling, showing outstanding interfacial stability and compatibility against Na electrode. More advantages such as ease of synthesis, low‐cost, and cold pressing for molding can be obtained. In situ NMR results revealed that the evaporation of THF may play an essential role in the Na + migration, where the movement of THF creates defects/vacancies and facilitates the migration of Na + .

Yu, Yang↗

DOE OSTI2023

Rapid Phase Transitions of Thermotropic Glycolipid Quasicrystal and Frank‐Kasper Mesophases: A Mechanistic Rosetta Stone

Abstract Experimental results are presented that serve to lower the barrier for developing the science and technology of non‐classical thermotropic glycolipid mesophases, which now include dodecagonal quasicrystal (DDQC) and Frank–Kasper (FK) A15 and σ mesophases that can be produced under mild conditions from a versatile class of sugar‐polyolefin conjugates. By employing “alloys” comprised of mono‐ and disaccharide‐polyolefin conjugates, and optionally with vitamin E as a small molecule phase modulator, we report the spontaneous formation of stable A15 mesophases at ambient temperature. We further document a rich thermotropic phase map that includes DDQC, A15, and σ mesophases of tunable periodicity that are connected through rapid thermotropic phase transitions as a function of increasing temperature in the order: liquid‐like packing (LLP)→DDQC → A15→σ→ disorder. This first direct observation of a rapid thermotropic A15→σ phase transition provides support for a diffusionless martensitic process proceeding through strain‐induced introduction of planar defects into the A15 lattice.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Abstraction of Hydride from Alkanes and Dihydrogen by the Perfluorotrityl Cation

Abstract Lewis acids play a central role in a large variety of chemical transformations. The reactivity of the strongest Lewis acids is typically studied in the context of affinity towards hard bases, such as fluoride or oxygenous species. Carbocations can be viewed as soft Lewis acids, possessing significant affinity for softer bases, such as hydride. This work presents the ambient‐temperature isolation of salts of the perfluorotrityl cation ((C 6 F 5 ) 3 C + or F 15 Tr + ) in combination with halogenated carborane anions. The F 15 Tr + cation exhibits remarkable hydride affinity, illustrated by the observation of hydride abstraction from dihydrogen, and of the rapid abstraction of hydride from −CH 2 −groups in alkanes. Theoretical studies support the favorability of hydride abstraction from dihydrogen, and indicate that the hydride abstraction from alkanes proceeds via a concerted hydride transfer process that is sensitive to steric effects.

Leong, Derek W. [Department of Chemistry Texas A&a↗

DOE OSTI2021

ZIF‐8 Membrane Permselectivity Modification by Manganese(II) Acetylacetonate Vapor Treatment

Vapor-phase treatment of ZIF-8 membranes with manganese(II) acetylacetonate (Mn(acac) 2 ) allows permselectivity tuning. Propylene/propane selectivity increases from 31 to 210 after the Mn(acac) 2 treatment at 165 °C for 30 min, while selectivities increase from 14.6 to 242 for H 2 /CH 4 , from 2.9 to 38 for CO 2 /CH 4 , from 2.4 to 29 for CO 2 /N 2 , and from 2.9 to 7.5 for O 2 /N 2 , after Mn(acac) 2 treatment at 175 °C for 30 min. Stable equimolar propylene/propane mixture selectivity of 165 at ambient temperature and 4 bar equimolar feed with a propylene flux of 8.3×10 −4 mol m −2 s −1 is established. Furthermore, a control experiment excludes thermal treatment alone causing these changes. XPS analysis reveals the presence of Mn(acac) 2 on the outer surface of the vapor-treated ZIF-8 membranes while no other changes are detectable by X-ray diffraction and infrared spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

K 3 SbS 4 as a Potassium Superionic Conductor with Low Activation Energy for K–S Batteries

Abstract Solid‐state K‐ion conducting electrolytes are key elements to address the current problems in K secondary batteries. Here, we report a sulfide‐based K‐ion conductor K 3 SbS 4 with a low‐activation energy of 0.27 eV. W‐doped K 3− x Sb 1− x W x S 4 ( x =0.04, 0.06, 0.08, 0.10 and 0.12) compounds were also explored for increasing vacancy concentrations and improving ionic conductivity. Among them, K 2.92 Sb 0.92 W 0.08 S 4 exhibits the highest conductivity of 1.4×10 −4 S cm −1 at 40 °C, which is among the best reported potassium‐ion conductors at ambient temperature. In addition, K 2.92 Sb 0.92 W 0.08 S 4 is electrochemically stable with long‐chained potassium polysulfide of K 2 S x . A room‐temperature solid potassium–sulfur (K−S) battery system has therefore been successfully demonstrated, which is the first K−S battery prototype using non‐commercial inorganic‐based electrolyte to block the polysulfide shuttle.

25 ENERGY STORAGE↗

DOE OSTI2023

Sodium Carbazolide and Derivatives as Solid‐State Electrolytes for Sodium‐Ion Batteries

Abstract Replacing widely used organic liquid electrolytes with solid‐state electrolytes (SSEs) could effectively solve the safety issues in sodium‐ion batteries. Efforts on seeking novel solid‐state electrolytes have been continued for decades. However, issues about SSEs still exist, such as low ionic conductivity at ambient temperature, difficulty in manufacturing, low electrochemical stability, poor compatibility with electrodes, etc. Here, sodium carbazolide (Na‐CZ) and its THF‐coordinated derivatives are rationally fabricated as Na + conductors, and two of their crystal structures are successfully solved. Among these materials, THF‐coordinated complexes exhibit fast Na + conductivities, i.e., 1.20×10 −4 S cm −1 and 1.95×10 −3 S cm −1 at 90 °C for Na‐CZ‐1THF and Na‐CZ‐2THF, respectively, which are among the top Na + conductors under the same condition. Furthermore, stable Na plating/stripping is observed even over 400 h cycling, showing outstanding interfacial stability and compatibility against Na electrode. More advantages such as ease of synthesis, low‐cost, and cold pressing for molding can be obtained. In situ NMR results revealed that the evaporation of THF may play an essential role in the Na + migration, where the movement of THF creates defects/vacancies and facilitates the migration of Na + .

Yu, Yang↗

DOE OSTI2023

Rapid Phase Transitions of Thermotropic Glycolipid Quasicrystal and Frank‐Kasper Mesophases: A Mechanistic Rosetta Stone

Abstract Experimental results are presented that serve to lower the barrier for developing the science and technology of non‐classical thermotropic glycolipid mesophases, which now include dodecagonal quasicrystal (DDQC) and Frank–Kasper (FK) A15 and σ mesophases that can be produced under mild conditions from a versatile class of sugar‐polyolefin conjugates. By employing “alloys” comprised of mono‐ and disaccharide‐polyolefin conjugates, and optionally with vitamin E as a small molecule phase modulator, we report the spontaneous formation of stable A15 mesophases at ambient temperature. We further document a rich thermotropic phase map that includes DDQC, A15, and σ mesophases of tunable periodicity that are connected through rapid thermotropic phase transitions as a function of increasing temperature in the order: liquid‐like packing (LLP)→DDQC → A15→σ→ disorder. This first direct observation of a rapid thermotropic A15→σ phase transition provides support for a diffusionless martensitic process proceeding through strain‐induced introduction of planar defects into the A15 lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

Abstraction of Hydride from Alkanes and Dihydrogen by the Perfluorotrityl Cation

Abstract Lewis acids play a central role in a large variety of chemical transformations. The reactivity of the strongest Lewis acids is typically studied in the context of affinity towards hard bases, such as fluoride or oxygenous species. Carbocations can be viewed as soft Lewis acids, possessing significant affinity for softer bases, such as hydride. This work presents the ambient‐temperature isolation of salts of the perfluorotrityl cation ((C 6 F 5 ) 3 C + or F 15 Tr + ) in combination with halogenated carborane anions. The F 15 Tr + cation exhibits remarkable hydride affinity, illustrated by the observation of hydride abstraction from dihydrogen, and of the rapid abstraction of hydride from −CH 2 −groups in alkanes. Theoretical studies support the favorability of hydride abstraction from dihydrogen, and indicate that the hydride abstraction from alkanes proceeds via a concerted hydride transfer process that is sensitive to steric effects.

Leong, Derek W. [Department of Chemistry Texas A&a↗

DOE OSTI2022

E ‐selective Semi‐hydrogenation of Alkynes under Mild Conditions by a Diruthenium Hydride Complex

Abstract The synthesis, characterization and catalytic activity of a new class of diruthenium hydrido carbonyl complexes bound to the t Bu PNNP expanded pincer ligand is described. Reacting t Bu PNNP with two equiv of RuHCl(PPh 3 ) 3 (CO) at 140 °C produces an insoluble air‐stable complex, which was structurally characterized as [Ru 2 ( t Bu PNNP)H(μ‐H)Cl(μ‐Cl)(CO) 2 ] ( 1 ) using solid‐state NMR, IR and X‐ray absorption spectroscopies and follow‐up reactivity. A reaction with KO t Bu results in deprotonation of a methylene linker to produce [Ru 2 ( t Bu PNNP * )H(μ‐H)(μ‐O t Bu)(CO) 2 ] ( 3 ) featuring a partially dearomatized naphthyridine core. This enables metal‐ligand cooperative activation of H 2 analogous to the mononuclear analogue, [Ru( t Bu PNP*)H(CO)]. In contrast to the mononuclear system, the bimetallic analogue 3 catalyzes the E ‐selective semi‐hydrogenation of alkynes at ambient temperature and atmospheric H 2 pressure with good functional group tolerance. Monitoring the semi‐hydrogenation of diphenylacetylene by 1 H NMR spectroscopy shows the intermediacy of Z ‐stilbene, which is subsequently isomerized to the E ‐isomer. Initial findings into the mode of action of this system are provided, including the spectroscopic characterization of a polyhydride intermediate and the isolation of a deactivated species with a partially hydrogenated naphthyridine backbone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Chemical–Switching Strategy for Synthesis and Controlled Release of Norcantharimides from a Biomass–Derived Chemical

Catalytic strategies were developed to synthesize and release chemicals for applications in fine chemicals, such as drugs and polymers, from a biomass-derived chemical, 5-hydroxymethyl furfural (HMF). The combination of the diene and aldehyde functionalities in HMF enabled catalytic production of acetalized HMF derivatives with diol or epoxy reactants to allow reversible synthesis of norcantharimide derivatives upon Diels-Alder reaction with maleimides. Reverse-conversion of the acetal group to an aldehyde yielded mismatches of the molecular orbitals in norcantharimides to trigger retro Diels-Alder reaction at ambient temperatures and released reactants from the coupled molecules under acidic conditions. In conclusion, these strategies provide for the facile synthesis and controlled release of high-value chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

The toughest animals of the Earth versus global warming: Effects of long‐term experimental warming on tardigrade community structure of a temperate deciduous forest

Abstract Understanding how different taxa respond to global warming is essential for predicting future changes and elaborating strategies to buffer them. Tardigrades are well known for their ability to survive environmental stressors, such as drying and freezing, by undergoing cryptobiosis and rapidly recovering their metabolic function after stressors cease. Determining the extent to which animals that undergo cryptobiosis are affected by environmental warming will help to understand the real magnitude climate change will have on these organisms. Here, we report on the responses of tardigrades within a five‐year‐long, field‐based artificial warming experiment, which consisted of 12 open‐top chambers heated to simulate the projected effects of global warming (ranging from 0 to 5.5°C above ambient temperature) in a temperate deciduous forest of North Carolina (USA). To elucidate the effects of warming on the tardigrade community inhabiting the soil litter, three community diversity indices (abundance, species richness, and Shannon diversity) and the abundance of the three most abundant species ( Diphascon pingue , Adropion scoticum , and Mesobiotus sp.) were determined. Their relationships with air temperature, soil moisture, and the interaction between air temperature and soil moisture were tested using Bayesian generalized linear mixed models. Despite observed negative effects of warming on other ground invertebrates in previous studies at this site, long‐term warming did not affect the abundance, richness, or diversity of tardigrades in this experiment. These results are in line with previous experimental studies, indicating that tardigrades may not be directly affected by ongoing global warming, possibly due to their thermotolerance and cryptobiotic abilities to avoid negative effects of stressful temperatures, and the buffering effect on temperature of the soil litter substrate.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

On the cogent formulation of an elastomeric silicone ink material for direct ink write ( DIW ) 3D printing

Abstract Adhesives and sealants show fine rheology with good physical and mechanical properties as viscous pastes, a possible starting point for developing direct ink writing (DIW) 3D printing ink. However, many commercial adhesives and sealants take days or weeks to cure fully. DIW 3D‐printed parts made directly from these sealants are not designed for a scalable manufacturing process and high‐volume production. Moreover, most of these adhesives and sealants have volume shrinkage during cure. A systematic understanding of formulation methods and design principles for an elastomeric silicone DIW ink can overcome these issues. This study presents the cogent formulation development of a 3D printable thermoset elastomer silicone that gels and cures isotropically in minutes, reducing cycle time for rapid ink development with no shrinkage during cure. More specifically, we outline the principles of raw material selection of a formulation to achieve excellent rheology, printability, synchronized working, and gel time fitting requirements closer to scalable manufacturing. The reaction kinetics and their corresponding 3D‐printed structural properties are also described. Interest in future work is toward a rational DIW 3D printing ink material development protocol and use of machine learning (ML). Highlights Formulation method flexibility and design principle of DIW ink. Raw material selection principle to achieve optimal rheology for DIW printing. Ink gel kinetics for large‐scale DIW manufacturing. Hydrosilylation conversion over time at different ambient temperatures. Structural properties of DIW 3D printed parts.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Evidence of hot carrier extraction in metal halide perovskite solar cells

The presence of hot carriers is presented in the operational properties of an (FA,Cs)Pb(I, Br, Cl) 3 solar cell at ambient temperatures and under practical solar concentration. Albeit, in a device architecture that is not suitably designed as a functional hot carrier solar cell. At 100 K, clear evidence of hot carriers is observed in both the high energy tail of the photoluminescence spectra and from the appearance of a nonequilibrium photocurrent at higher fluence in light J–V measurements. At room temperature, however, the presence of hot carriers in the emission at elevated laser fluence is shown to compete with a gradual red shift in the PL peak energy as photoinduced halide segregation begins to occur at higher lattice temperature. The effects of thermionic emission of hot carriers and the presence of a nonequilibrium carrier distribution are also shown to be distinct from simple lattice heating. In conclusion, this results in large unsaturated photocurrents at high powers as the Fermi distribution exceeds that of the heterointerface controlling carrier transport and rectification.

14 SOLAR ENERGY↗

DOE OSTI2022

Does plasma jet sintering follow an Arrhenius-type expression?

Atmospheric pressure, ambient temperature plasma jets have become a promising candidate for material processing in parallel with developments in additive manufacturing. Recent work has shown that plasma jets can be used to sinter printed nanoparticles at temperatures much lower than typically required for conventional thermal sintering. In this report we conduct a mechanistic study on plasma jet sintering that correlates specific energy input with the electrical conductivity of printed silver films after sintering. Increasing the specific energy input accelerated the sintering process following an Arrhenius-like exponential trend across a large range of conditions, including both helium and argon plasma jets. Although an exponential relationship is also found with the plasma heated substrate temperature, independent studies indicate that heating is not the primary mechanism. These results suggest there is a general behavior that couples the plasma jet with the surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Trocylation of 3-quinuclidinol, a key marker for the chemical warfare agent 3-quinuclidinyl benzilate, for its enhanced detection at low levels in complex soil matrices by electron ionization gas chromatography–mass spectrometry

Detection of 3-quinuclidinol (3Q), a marker for the chemical warfare agent 3-quinuclidinyl benzilate, is very difficult by gas chromatography–mass spectrometry (GC/MS), providing low, broad signals even when analyzed in isolated form. Therefore, a method that can convert 3Q into a substrate with enhanced detectability by GC/MS would be an important tool for its analysis. 2,2,2-Trichloroethoxycarbonyl chloride (TrocCl) was used in the derivatization of 3Q in three different soils of varying composition and total organic content (Virginia type A soil, Nebraska EPA standard soil and Ottawa sand) when present at a 10 μg g -1 concentration in each. A direct derivatization protocol and one involving the pre-extraction of the analyte were evaluated for their individual efficiencies and subsequent analysis using electron ionization GC/MS. The practical derivatization of 3Q, when present at low levels (10 μg g -1 ) in three different soil matrices, was found to be rapid (1 h) and to take place smoothly at ambient temperature (and as low as 4°C). The method detection limit was determined to be 30 ng mL -1 for the Virginia type A soil, 49 ng mL -1 for the Nebraska EPA standard soil and 72 ng mL -1 for the Ottawa sand sample. An expedient and practical derivatization method for 3Q, a chemical warfare degradation product difficult to detect by GC/MS, has been realized using trichloroethyl chloroformate. The reaction provides 3Q-Troc, a derivative with better detectability than 3Q by electron ionization GC/MS such as peak sharpness and a unique mass spectrum for its unambiguous identification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Leveraging Curvature on N–Doped Carbon Materials for Hydrogen Storage

Carbon sorbent materials have shown great promise for solid-state hydrogen (H 2 ) storage. Modification of these materials with nitrogen (N) dopants has been undertaken to develop materials that can store H 2 at ambient temperatures. In this work density functional theory (DFT) calculations are used to systematically probe the influence of curvature on the stability and activity of undoped and N-doped carbon materials toward H binding. Specifically, four models of carbon materials are used: graphene, [5,5] carbon nanotube, [5,5] D 5d -C 120 , and C 60 , to extract and correlate the thermodynamic properties of active sites with varying degrees of sp 2 hybridization (curvature). From the calculations and analysis, it is found that graphitic N-doping is thermodynamically favored on more pyramidal sites with increased curvature. In contrast, it is found that the hydrogen binding energy is weakly affected by curvature and is dominated by electronic effects induced by N-doping. These findings highlight the importance of modulating the heteroatom doping configuration and the lattice topology when developing materials for H 2 storage.

08 HYDROGEN↗

DOE OSTI2025

Bottom‐Up Synthesis of Metallic CoNi Nanoplatelets with Magnetic Vortex‐Like Spin Configurations

Magnetic nanoplatelets hold significant potential for various technical applications due to their ability to switch between a fully magnetized state with high magnetization and a vortex‐like configuration that eliminates stray fields in the absence of an external field. This study presents the synthesis of uniform CoNi nanoplatelets through the topotactic reduction of metal hydroxides using hydrogen plasma. The reduction process is analyzed via magnetometry, leveraging the transition from paramagnetic hydroxide to ferromagnetic metal. Lorentz transmission electron microscopy and scanning transmission X‐ray microscopy confirm the presence of magnetic vortex‐like structures in isolated Co 0.85 Ni 0.15 nanoplatelets at ambient temperature. Additionally, micromagnetic simulations are conducted to further explore the magnetic properties of the nanoplatelets, revealing the formation of magnetic vortex remanent states at diameters between 200 nm and 1 μm and a thickness of around 12 nm. Notably, structural defects and thickness variations do not directly destabilize the magnetic vortex configurations.

Kräenbring, Mena‐Alexander [Faculty of Physics and↗