SEARCH · Engineering Papers

Results for “active layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

DOE OSTI2023

High-Mass Loading of Flower-like Ni-MoS 2 microspheres Toward Efficient Intercalation pseudocapacitive Electrode

This work reports the exploration of intercalation pseudocapacitance in a thicker electrode of flowerlike Ni-doped MoS 2 microspheres that features a mass loading of ~10 mg/cm 2 without sacrificing the gravimetric capacitance (~425 F/g at 5 mV/s). Integration of Ni atoms into MoS 2 microspheres not only stabilized the structural integrity but also ameliorated the rapid intercalation and deintercalation of electrolyte ions even at a commercial-level mass loading. The energy instability by Ni doping significantly changed the local bonding behavior and the overall electronic structure of MoS 2 , facilitating the breaking of the MoS 2 layer and generation of more active edge sites, which are responsible for faster reaction kinetics. The experiments attribute the overall capacitance enhancement in (Mo-Ni)S 2 to the increased rate of electrolyte ion insertion and extraction, which is confirmed by b-values close to 0.5, at different potentials, indicating that the current response predominantly depends on the diffusive mechanism for both MoS 2 and Ni-MoS 2 thicker electrodes. The symmetric device constructed with Ni-MoS 2 microspheres exhibited a capacitance value of 101 F/g in 1 mV/s, for which the energy density is 9 Wh/kg, as well as attained an outstanding cycling stability of 10000 cycles with 60% retention at 2 A/g. In addition to providing insights into the development of 2D TMDs, this work explores the design of robust and highly efficient intercalation electrode material for electrochemical energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Exploring the Electrochemical Stability Window of an All-Solid-State Composite Cathode via a Novel Operando Tender XPS Setup

All-solid-state batteries (ASSBs) have the potential to provide greater energy density than conventional batteries based on liquid electrolytes. Here, an operando ASSB cell setup for tender X-ray photoelectron spectroscopy (XPS) was developed, and the interface of a Ni-rich layered transition metal oxide cathode active material (CAM) and an Li 6 PS 5 Cl (LPSCl) solid electrolyte (SE) was evaluated during initial charge/discharge cycles. After validating the cell performance against a conventional pouch cell operated at high compression, intermittent galvanostatic cycling was performed, and XPS data were recorded as a function of state of charge (SOC). Upon the initial charge of the cell to ≈3.3 V Li , the LPSCl appears to decompose into LiCl, Li 3 PS 4 , and polysulfides, whose amount gradually increases with potential. Upon further charge, at a potential higher than ≈3.8 V Li , initially, present sulfate and sulfite impurities decompose, and at ≈74% SOC (corresponding to a cathode potential of ≈4.10 V Li ), surface reconstruction of the CAM particles due to lattice oxygen release is detected. In addition, at potentials beyond ≈4.6 V Li , a decrease of the S 1s counts of the sum of the LPSCl, the thiophosphate, and polysulfide species suggests the formation of elemental sulfur that is lost via sublimation into the vacuum chamber.

25 ENERGY STORAGE↗

DOE OSTI2025

Unraveling Dimensional Tuning: From 2D to 3D in Covalent Organic Frameworks for Enhanced 2e – Oxygen Reduction Reaction

Covalent organic frameworks (COFs) with a two-dimensional (2D) topology have recently emerged as promising catalyst systems for the electrosynthesis of hydrogen peroxide (H 2 O 2 ) from oxygen (O 2 ). However, designing 2D catalysts to achieve higher H 2 O 2 selectivity presents a significant challenge because of the extensive layer stacking and the aggregated active sites located in the basal planes. It results in lower atom utilization, which requires attention. In this study, we present two functionally similar COFs: one with a 2D rhombus topology (2D@BT_TPA-COF) and another with a three-dimensional (3D) noninterpenetrated pts topology (3D@BT_TPA-COF). Both COFs were utilized for the 2e – oxygen reduction reaction (2e – ORR). Tunning the dimensionality from 2D to 3D resulted in an increase in H 2 O 2 selectivity from approximately ~56% to approximately ~96% (at 0.4 V) and a rise in the turnover frequency (TOF) from 0.05 to 0.08 s –1 at 0.3 V. Nonaggregated active site distribution over 3D topology, featuring higher active site exposure, provides better access to the O 2 /electrolyte and facilitates electron transfer leading to higher 2e – ORR activity and selectivity compared to the 2D counterpart.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

High-temperature phonon-mediated superconductivity in monolayer Mg 2 B 4 C 2

A two-dimensional material – Mg 2 B 4 C 2 , belonging to the family of the conventional superconductor MgB 2 , is theoretically predicted to exhibit superconductivity with critical temperature T c estimated in the 47–48 K range (predicted using the McMillian-Allen-Dynes formula) without any tuning of external parameters such as doping, strain, or substrate-induced effects. The origin of such a high intrinsic T c is ascribed to the presence of strong electron-phonon coupling and large density of states at the Fermi level. This system is obtained after replacing the chemically active boron-boron surface layers in a MgB 2 slab by chemically inactive boron-carbon layers. Hence, the surfaces of this material are inert. Our calculations confirm the stability of 2D Mg 2 B 4 C 2 . We also find that the key features of this material remain essentially unchanged when its thickness is increased by modestly increasing the number of inner MgB 2 layers.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Atomic-scale modeling of the dissolution of oxidized platinum nanoparticles in an explicit water environment

Pt nanoparticles (NPs) are currently being investigated for use in fuel cells; however, Pt NP oxidation as a function of size, morphology, and temperature is not well understood or currently quantified. In this study, the stability and dissolution of oxidized platinum NPs is examined via classical molecular dynamics in an explicit water environment. The NPs considered range in size from 1.35 to 2.92 nm in diameter and included five different monolayer (ML) coverages of O*. The simulations were performed at 300, 450, and 600 K with the many-body, reactive third-generation charge-optimized many-body or COMB3 potentials and examine the kinetics of NP dissolution in water. The Pt–O layer, which reduces the kinetic activity for Pt atom dissolution, is projected to make dissolution more favorable for O* MLs smaller than 0.5. The simulations further indicate that the Pt NPs' kinetic rates of dissolution are slowed by an increase in the number of adsorbed species caused by the dissociation of water molecules at the reconstructed facets of the Pt NPs. Furthermore, these findings quantify the effect of oxygen and temperature on the stability and dissolution of oxidized platinum NP in an explicit water environment similar to the conditions in fuel cells and electrocatalysis.

08 HYDROGEN↗

DOE OSTI2022

Long wavelength interband cascade lasers

InAs-based interband cascade lasers (ICLs) can be more easily adapted toward long wavelength operation than their GaSb counterparts. Devices made from two recent ICL wafers with an advanced waveguide structure are reported, which demonstrate improved device performance in terms of reduced threshold current densities for ICLs near 11 μm or extended operating wavelength beyond 13 μm. Here, the ICLs near 11 μm yielded a significantly reduced continuous wave (cw) lasing threshold of 23 A/cm 2 at 80 K with substantially increased cw output power, compared with previously reported ICLs at similar wavelengths. ICLs made from the second wafer incorporated an innovative quantum well active region, comprised of InAsP layers, and lased in the pulsed-mode up to 120 K at 13.2 μm, which is the longest wavelength achieved for III–V interband lasers.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Laser writing of nitrogen-doped silicon carbide for biological modulation

Conducting or semiconducting materials embedded in insulating polymeric substrates can be useful in biointerface applications; however, attainment of this composite configuration by direct chemical processes is challenging. Laser-assisted synthesis has evolved as a fast and inexpensive technique to prepare various materials, but its utility in the construction of biophysical tools or biomedical devices is less explored. Here, we use laser writing to convert portions of polydimethylsiloxane (PDMS) into nitrogen-doped cubic silicon carbide (3C-SiC). The dense 3C-SiC surface layer is connected to the PDMS matrix via a spongy graphite layer, facilitating electrochemical and photoelectrochemical activity. We demonstrate the fabrication of arbitrary two-dimensional (2D) SiC-based patterns in PDMS and freestanding 3D constructs. To establish the functionality of the laser-produced composite, we apply it as flexible electrodes for pacing isolated hearts and as photoelectrodes for local peroxide delivery to smooth muscle sheets.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

The BDX-MINI detector for Light Dark Matter search at JLab

This paper describes the design and performance of a compact detector, BDX-MINI, that incorporates all features of a concept that optimized the detection of light dark matter in the MeV-GeV mass range produced by electrons in a beam dump. It represents a reduced version of the future BDX experiment expected to run at JLAB. BDX-MINI was exposed to penetrating particles produced by a 2.176GeV electron beam incident on the beam dump of Hall A at Jefferson Lab. The detector consists of 30.5 kg of PbWO 4 crystals with sufficient material following the beam dump to eliminate all known particles except neutrinos. The crystals are read out using silicon photomultipliers. Completely surrounding the detector are a passive layer of tungsten and two active scintillator veto systems, which are also read out using silicon photomultipliers. The design was validated and the performance of the robust detector was shown to be stable during a six month period during which the detector was operated with minimal access.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Mechanistic and Mitigation-Strategy Insights into NaCl and CaCl 2 Contamination of Proton-Exchange-Membrane Water Electrolysis Using Continuum Modeling

Cationic contaminants are detrimental to proton-exchange-membrane water electrolyzers (PEMWEs). To obtain insight, a 1-D, nonisothermal, multiphase continuum cell model including cationic contamination is developed. Simulations of steady-state cell performance predict decreased performance due to an increase in kinetic overpotential associated with the hydrogen-evolution reaction, which was attributed to decreased protonic-activity within the cathode catalyst layer from proton supplantation with contaminant cations. The accumulation and extent of cation exchange in the cathode catalyst layer depends on the operating current density due to migration. Simulations of cell recovery of potential suggest that a contaminated cell can recover approximately 78% (450 mV) with 24 h of constant current density operation at 2 A cm –2 , with higher current densities accelerating reduced recovery times. Parametric studies show that anode-side acidification at lower current densities inhibit cation contaminant adsorption, and cathode-side acidification at larger current densities facilitate the expulsion of adsorbed cations; for a cathode-side pH of 6 and 5, the cell can recover an additional 10% and 100% performance, respectively. Overall, the model serves as a framework for modeling other aspects of PEMWE systems to address durability and performance aspects, which can assist in improving the viability of the technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Technical Note CRYOFRABR#002/2021: Activated-copper-coated alumina granules synthesis

Detailed experimental studies of oxygen capture in the argon purification process using activated-copper on alumina and layered double hydroxide (LDH) were carried out, and the results were compared to the BASF commercial copper material Cu-0226 S performance. Here, we report the following main findings: i) the desired crystal structures for the studied materials were obtained after the synthesis process, ii) the use of the LDH structure promoted greater dispersion of the CuO phase when compared to BASF commercial catalyst, iii) alumina impregnated with copper demonstrated a similar result as the BASF sample for O 2 capture, and iv) among the three samples evaluated, the LHD sample demonstrated the best results regarding oxygen capturing performance becoming a promising structure for further studies.

36 MATERIALS SCIENCE↗

DOE OSTI2024

AOI [1] Advanced Manufacturing of Ceramic Anchors with Embedded Sensors for Process and Health Monitoring of Coal Boilers

Researchers at West Virginia University (WVU) developed methods to fabricate and test ceramic anchors with an embedded sensor technology for monitoring the health and processing conditions within pulverized coal (PC) and fluidized-bed combustion (FBC) boiler systems. The technology included the development of advanced manufacturing processes for 2D/3D printing electroceramic (conductive ceramic) sensor designs within the ceramic anchor microstructure during the manufacturing process. This advanced manufacturing process would allow for the precise control of local microstructure and composition in order to engineer layer-by-layer any protective and electrically active materials within the refractory anchor. This 3D printing technology would permit the rapid and controlled design of the refractory microstructure and embedded sensor design throughout the volume of the ceramic anchor. The work also included a method to interconnect the sensors to boiler shell through the anchor clamp, where the sensor signals will be processed by low-power electronics and transmitted wirelessly to a central processing hub. The end-goal of the program was to produce a ceramic anchor sensor system which would be ready for implementation within a coal boiler, and/or other similar refractory liner systems (such as that in the glass and metal manufacturing areas). The project objectives were to: 1) Define the chemical and microstructural stability, in addition to the electrical properties, of oxide and non-oxide ceramic composites to be embedded within the ceramic anchor compositions that may operate up to 1400ºC; 2) Develop and implement the 2D/3D printing technology to pattern and control the microstructure of the ceramic anchor and embedded sensor circuits; 3) Develop an interconnect technology which will permit easy installation of the ceramic anchors and signal collection at the boiler shell; 4) Develop low power analog electronics and wireless communication hardware to efficiently collect the sensor signal at each processing unit and transmit data to a central hub for data analysis; 5) Demonstrate the smart ceramic anchor system for temperature and liner fracture within a high-temperature processing unit, such as a boiler furnace or glass melting furnace floor/wall liner.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2025

Titanium Nitride as an Intermetallic Diffusion Barrier for Hydrogen Permeation in Palladium–Vanadium Composite Membranes

Hydrogen purification is a critical industrial process, and there are ongoing efforts to develop low-cost alternatives to palladium foil membranes. Titanium nitride (TiN) is studied as an interdiffusion barrier to enable hydrogen permeation in composite palladium–vanadium membranes. TiN was deposited via reactive sputtering, and films with the desired (200) orientation were obtained in the metallic regime at 400 °C under a 200 V bias to the substrate. The permeability of thin-film TiN was determined with palladium-based sandwich structures. TiN layers up to 10 nm resulted in a minimal decrease in flux (~20%) relative to a freestanding PdCu foil, which was attributed to the interfacial resistance. At greater thicknesses, the TiN layer was rate-limiting, and it was found that the effective permeability of the sputtered TiN thin films was ~6 × 10−12 mol s−1 m−1 Pa−0.5. Composite Pd|TiN|V|TiN|Pd membranes exhibited permeability values up to three times greater than pure palladium, exhibiting stability at 450 °C for over 100 h, with the lack of intermetallic diffusion and alloy formation being confirmed with XRD. The membranes were unstable at 500 °C, which was attributed to the instability of the thin Pd layer and loss of catalytic activity.

Biochemistry & Molecular Biology↗

DOE OSTI2024

GAINN: The Galaxy Assembly and Interaction Neural Networks for High-redshift JWST Observations

We present the Galaxy Assembly and Interaction Neural Networks (Gainn), a series of artificial neural networks for predicting the redshift, stellar mass, halo mass, and mass-weighted age of simulated galaxies based on James Webb Space Telescope (JWST) photometry. Our goal is to determine the best neural network for predicting these variables at 11 < z < 15. The parameters of the optimal neural network can then be used to estimate these variables for real, observed galaxies. The inputs of the neural networks are JWST filter magnitudes of a subset of five broadband filters (F150W, F200W, F277W, F356W, and F444W) and two medium-band filters (F162M and F182M). We compare the performance of the neural networks using different combinations of these filters, as well as different activation functions and numbers of layers. The best neural network predicted redshift with a normalized rms error of $0.010^{+0.003}_{-0.001}$, stellar mass with rms = $0.089^{+0.044}_{-0.022}$, halo mass with a mean-squared error of $0.022^{+0.014}_{-0.008}$, and mass-weighted age with rms = $12.466^{+5.065}_{-2.408}$. We also test the performance of Gainn on real data from MACS0647JD, an object observed by JWST. Predictions from Gainn for the first projection of the object (JD1) have normalized bias $\langle$Δz$\rangle$ < 0.00228, which is significantly smaller than found with template-fitting methods. We find that the optimal filter combination is F277W, F356W, F162M, and F200W when considering both theoretical accuracy and observational resources from JWST.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Interconnect: Cooperative Research and Development Final Report, CRADA Number CRD-13-00507 (Project 4)

This CRADA modification involves analyses on a variety of CdTe-PV related materials, test structures, solar cells, and modules produced at FSLR and/or NLR and adds analysis related to module degradation and reliability. Materials will be provided by FSLR, NLR, and/or by interleaving FSLR and NLR layers and processes. Module reliability activities will include technical risk assessment, materials characterization, module and test structure characterization, modeling, accelerated test development, and outdoor testing.

14 SOLAR ENERGY↗

NASA NTRS1973

The kinetics of ulvoespinel reduction - Synthetic study and applications to lunar rocks.

The kinetics of Fe2TiO4 reduction to FeTiO3 + Fe were studied using CO-CO2 gas mixtures with fO2 measured by a solid ceramic (calcia-zirconia) oxygen electrolyte cell. Isothermal rate studies at 900 C suggest that the mechanism of Fe2TiO4 reduction is one of nucleation and growth, where the growth stage may be controlled by the diffusion of the reactant through the product layer or volume diffusion. The activation energy for the growth stage of the process was determined to be 46 plus or minus 4 kcal/mole.

Mccallister, R. H.↗

NASA NTRS1982

The 1980 land cover for the Puget Sound region

Both LANDSAT imagery and the video information communications and retrieval software were used to develop a land cover classifiction of the Puget Sound of Washington. Planning agencies within the region were provided with a highly accurate land cover map registered to the 1980 census tracts which could subsequently be incorporated as one data layer in a multi-layer data base. Many historical activities related to previous land cover mapping studies conducted in the Puget Sound region are summarized. Valuable insight into conducting a project with a large community of users and in establishing user confidence in a multi-purpose land cover map derived from LANDSAT is provided.

Shinn, R. D.↗

NASA NTRS1982

The composition and vertical structure of the lower cloud deck on Venus

Excluding the insertion of a probe into the lower Venus atmosphere, the only means of examining the atmospheric properties below the upper cloud layer are by passive or active radio techniques. Particularly, in a radio occultation experiment, the amplitude and Doppler data of a signal which has been refracted by the dense Venus atmosphere provide temperature, pressure, atmospheric density, cloud mass content, and some information about the cloud composition. The Venus orbiting spacecraft Pioneer Venus has provided radio occultation data for more than two years. The present investigation has the primary goal to use the absorption coefficient profiles derived from the radio occultation experiment to determine the mass content and composition of the Venusian lower deck. Attention is given to an experiment description, liquid content calculations, the mass content equation, the subtraction of gaseous absorbers, dielectric constant measurements, the concentration profile, the spherical shell model, and mass content profiles for all orbits.

Cimino, J.↗

NASA NTRS1990

Active turbulence control in wallbounded flow using direct numerical simulations

An exploratory study of concepts for active control of turbulent boundary layers using the direct numerical simulation technique was performed. Significant drag reduction was achieved when the surface boundary condition was modified such that it could suppress the large-scale structures present in the wall region. This was achieved by prescribing the normal component of velocity at the wall to be 180 deg out of phase with the normal velocity slightly above the wall at each instant. The drag reduction was accompanied with significant reduction in the intensity of the wall-layer structures and reductions in the magnitude of Reynolds stresses throughout the flow. Suitability of wall-pressure and shear-stress fluctuations for detection of flow structures above the wall was examined. A preliminary result obtained by applying the present control strategy to a transitional flow is also briefly described, from which one can infer a possible linkage between the control strategy and flow stability.

Kim, J.↗