Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Characterization of few-layer 1T-MoSe{sub 2} and its superior performance in the visible-light induced hydrogen evolution reaction

Based on earlier results on the photocatalytic properties of MoS{sub 2}, the 1T form of MoSe{sub 2}, prepared by lithium intercalation and exfoliation of bulk MoSe{sub 2}, has been employed for the visible-light induced generation of hydrogen. 1T-MoSe{sub 2} is found to be superior to both 2H and 1T MoS{sub 2} as well as 2H-MoSe{sub 2} in producing hydrogen from water, the yield being in the 60–75 mmol h{sup −1} g{sup −1} range with a turn over frequency of 15–19 h{sup −1}. First principles calculations reveal that 1T-MoSe{sub 2} has a lower work function than 2H-MoSe{sub 2} as well as 1T and 2H-MoS{sub 2}, making it easier to transfer an electron from 1T-MoSe{sub 2} for the production of H{sub 2}.

36 MATERIALS SCIENCE↗

Remnant PbI{sub 2}, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?

Perovskite-containing solar cells were fabricated in a two-step procedure in which PbI{sub 2} is deposited via spin-coating and subsequently converted to the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite by dipping in a solution of CH{sub 3}NH{sub 3}I. By varying the dipping time from 5 s to 2 h, we observe that the device performance shows an unexpectedly remarkable trend. At dipping times below 15 min the current density and voltage of the device are enhanced from 10.1 mA/cm{sup 2} and 933 mV (5 s) to 15.1 mA/cm{sup 2} and 1036 mV (15 min). However, upon further conversion, the current density decreases to 9.7 mA/cm{sup 2} and 846 mV after 2 h. Based on X-ray diffraction data, we determined that remnant PbI{sub 2} is always present in these devices. Work function and dark current measurements showed that the remnant PbI{sub 2} has a beneficial effect and acts as a blocking layer between the TiO{sub 2} semiconductor and the perovskite itself reducing the probability of back electron transfer (charge recombination). Furthermore, we find that increased dipping time leads to an increase in the size of perovskite crystals at the perovskite-hole-transporting material interface. Overall, approximately 15 min dipping time (∼2% unconverted PbI{sub 2}) is necessary for achieving optimal device efficiency.

36 MATERIALS SCIENCE↗

Sensitive fast electron spectrometer in adjustable triode configuration with pulsed tunable laser for research on photo-induced field emission cathodes

We have completed an ultra-high vacuum system for sensitive fast electron spectroscopy from cold cathodes in triode configuration under high electric fields E (<100 MV/m) and pulsed tunable laser illumination (3.5 ns, 10 Hz, hν = 0.5-5.9 eV, and 0.3-17 mJ). The cathodes are prepared and inserted under clean room conditions and can be precisely 3D-positioned, cooled or heated (77-400 K). Commissioning results with the upgraded system are presented. Field emission measurements with a W tip yielded an energy resolution of 14 meV at 4 eV pass energy and a precise determination of the emitter work function, size, and temperature. Photoemission spectroscopy of short electron bunches from a virgin and laser-ablated S-GaP crystal and quantum efficiency measurements revealed surface states, energy relaxation, and band structure effects. In conclusion, this novel system is ready now for the development and characterization of photo-induced field emission cathodes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation study of 14-nm-gate III-V trigate field effect transistor devices with In{sub 1−x}Ga{sub x}As channel capping layer

In this work, we study characteristics of 14-nm-gate InGaAs-based trigate MOSFET (metal-oxide-semiconductor field effect transistor) devices with a channel capping layer. The impacts of thickness and gallium (Ga) concentration of the channel capping layer on the device characteristic are firstly simulated and optimized by using three-dimensional quantum-mechanically corrected device simulation. Devices with In{sub 1−x}Ga{sub x}As/In{sub 0.53}Ga{sub 0.47}As channels have the large driving current owing to small energy band gap and low alloy scattering at the channel surface. By simultaneously considering various physical and switching properties, a 4-nm-thick In{sub 0.68}Ga{sub 0.32}As channel capping layer can be adopted for advanced applications. Under the optimized channel parameters, we further examine the effects of channel fin angle and the work-function fluctuation (WKF) resulting from nano-sized metal grains of NiSi gate on the characteristic degradation and variability. To maintain the device characteristics and achieve the minimal variation induced by WKF, the physical findings of this study indicate a critical channel fin angle of 85{sup o} is needed for the device with an averaged grain size of NiSi below 4x4 nm{sup 2}.

36 MATERIALS SCIENCE↗

Balmer-α spectrum measurements of the LHD one-third ion source

Wavelength spectra of Balmer-α light from plasmas in the extraction region of the Large Helical Device-R&D negative ion source, or the LHD one-third ion source have exhibited a blue shift as a negative bias voltage was applied to the plasma grid. The blue shift increased as the negative bias voltage with respect to the local plasma potential was increased. The measured spectra were compared with the velocity distributions of surface reflected hydrogen atoms calculated by atomic collisions in amorphous target code. The arc power and the source H{sub 2} pressure also affected the shift and broadening in the observed Balmer-α spectra. The possibility of identifying the negative hydrogen ions produced at the low work function plasma grid surface by high resolution spectroscopy is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Barium depletion in hollow cathode emitters

Dispenser hollow cathodes rely on a consumable supply of Ba released by BaO-CaO-Al{sub 2}O{sub 3} source material in the pores of a tungsten matrix to maintain a low work function surface. The examination of cathode emitters from long duration tests shows deposits of tungsten at the downstream end that appear to block the flow of Ba from the interior. In addition, a numerical model of Ba transport in the cathode plasma indicates that the Ba partial pressure in the insert may exceed the equilibrium vapor pressure of the dominant Ba-producing reaction, and it was postulated previously that this would suppress Ba loss in the upstream part of the emitter. New measurements of the Ba depletion depth from a cathode insert operated for 8200 h reveal that Ba loss is confined to a narrow region near the downstream end, confirming this hypothesis. The Ba transport model was modified to predict the depletion depth with time. A comparison of the calculated and measured depletion depths gives excellent qualitative agreement, and quantitative agreement was obtained assuming an insert temperature 70 °C lower than measured beginning-of-life values.

36 MATERIALS SCIENCE↗

Conversion efficiency improvement of inverted CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells with room temperature sputtered ZnO by adding the C{sub 60} interlayer

We have demonstrated the performance of inverted CH{sub 3}NH{sub 3}PbI{sub 3} perovskite-based solar cells (SCs) with a room temperature (RT) sputtered ZnO electron transport layer by adding fullerene (C{sub 60}) interlayer. ZnO exhibits a better matched conduction band level with perovskite and Al work function and around energy offset of 2.2 eV between highest occupied molecular orbital level of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite and valance band level of ZnO. However, the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite layer will be damaged during direct RT sputtering deposition of ZnO. Therefore, the C{sub 60} interlayer having matched conduction band level with ZnO and CH{sub 3}NH{sub 3}PbI{sub 3} perovskite added between the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite and RT sputtered ZnO layers for protection prevents sputtering damages on the CH{sub 3}NH{sub 3}PbI{sub 3} perovskite layer. The short-circuit current density (J{sub SC}, 19.41 mA/cm{sup 2}) and open circuit voltage (V{sub OC}, 0.91 V) of the SCs with glass/ITO/poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS)/perovskite/C{sub 60}/RT sputtered ZnO/Al structure is higher than the J{sub SC} (16.23 mA/cm{sup 2}) and V{sub OC} (0.90 V) of the reference SC with glass/ITO/PEDOT:PSS/perovskite/C{sub 60}/bathocuproine (BCP)/Al structure. Although the SCs with the former structure has a lower fill factor (FF%) than the SCs with the latter structure, its conversion efficiency η% (10.93%) is higher than that (10.6%) of the latter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ignition and monitoring technique for plasma processing of multicell superconducting radio-frequency cavities

In this study, an in-situ plasma processing technique has been developed at the Spallation Neutron Source (SNS) to improve the performance of the superconducting radio-frequency (SRF) cavities in operation. The technique uses a low-density reactive neon-oxygen plasma at room-temperature to improve the surface work function, to help remove adsorbed gases on the RF surface and to reduce its secondary emission yield. SNS SRF cavities are six-cell elliptical cavities and the plasma typically ignites in the cell where the electric field is the highest. This article will detail a technique that was developed to ignite and monitor the plasma in each cell of the SNS cavities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thin-film GaN Schottky diodes formed by epitaxial lift-off

The performance of thin-film GaN Schottky diodes fabricated using a large-area epitaxial lift-off (ELO) process is reported in this work. Comparison of the device characteristics before and after lift-off processing reveals that the Schottky barrier height remains unchanged by the liftoff processing and is consistent with expectations based on metal-semiconductor work function differences, with a barrier height of approximately 1 eV obtained for Ni/Au contacts on n− GaN. However, the leakage current in both reverse and low-forward-bias regimes is found to improve significantly after ELO processing. Likewise, the ideality factor of the Schottky diodes also improves after ELO processing, decreasing from n = 1.12–1.18 before ELO to n = 1.04–1.10 after ELO. A possible explanation for the performance improvement obtained for Schottky diodes after substrate removal by ELO processing is the elimination of leakage paths consisting of vertical leakage along threading dislocations coupled with lateral conduction through the underlying n+ buffer layer that is removed in the ELO process. Epitaxial liftoff with GaN may enable significant improvement in device performance and economics for GaN-based electronics and optoelectronics.

Wang, Jingshan↗

Topological insulators for the generation of electron beams

Measurements of photo-yields from various topological insulators (TIs) in ultra-high vacuum were made. Marked differences in the photoelectric yield were found between the freshly in-vacuum cleaved and the atmosphere cleaved TI samples. The spectral dependence of their quantum efficiency (QE) was obtained in as-cleaved and cesiated TI samples. Inferred work functions ranging from 5 to 5.5 eV were found in all TI samples before cesiation, and they were lowered by ~0.5 eV after cesiation. At the ultraviolet wavelength of 268 nm, the QE of all samples is ~2 × 10 -7 before cesiation but improved to 10 -4 –10 -3 after cesiation. In conclusion, knowledge of the QE has practical implication and can serve as a useful guide for the development of a spin-polarized electron source. However, the spin polarized nature of the photo-emitted electron remains yet to be explored.

43 PARTICLE ACCELERATORS↗

Plasma ignition and detection for in-situ cleaning of 1.3 GHz 9-cell cavities

Superconducting Radio Frequency (SRF) cavities performance preservation is crucial, from vertical test to accelerator operation. Field Emission (FE) is still one of the performance limiting factors to overcome and plasma cleaning has been proven successful by the Spallation Neutron Source (SNS), in cleaning field emitters and increasing the work function of Nb. A collaboration has been established between Fermi National Accelerator Laboratory (FNAL), SLAC National Accelerator Laboratory and Oak Ridge National Laboratory (ORNL) with the purpose of applying plasma processing to the Linac Coherent Light Source-II (LCLS-II) cavities, in order to minimize and overcome field emission without affecting the high Q of nitrogen-doped cavities. The cleaning for LCLS-II will follow the same plasma composition adopted at SNS, which allows in-situ processing of cavities installed in cryomodules from hydrocarbon contaminants. A novel method for plasma ignition has been developed at FNAL: a plasma glow discharge is ignited using high order modes to overcome limitations imposed by the fundamental power coupler, allowing in-situ cleaning for cavities in cryomodule. The plasma can be easily ignited and tuned in each of the cavity cells using low RF power. A method for plasma detection has been developed as well, which allows the detection of the plasma location in the cavity without the need of cameras at both cavity ends. The presented method can be applied to other multi-cell cavity designs, even for accelerators where the coupling for the fundamental modes at room temperature is very weak.

43 PARTICLE ACCELERATORS↗

Structure and reactivity of highly reduced titanium oxide surface layers on TiO 2 : A first-principles study

Titanium oxide structures featuring highly reduced TiO x films on top of nearly stoichiometric TiO 2 hold promise for applications ranging from photocatalysis to resistance switching devices. In this article, we focus on titanium monoxide (TiO) layers on anatase TiO 2 (001) and use first principles calculations to investigate their structure and properties as well as their interface with liquid water. We find that only a single TiO layer can grow epitaxially on anatase (001) and subsequent growth leads to the formation of TiO islands. The TiO layers decrease the work function and enhance the surface conductivity in comparison to pure anatase, two features that can improve the TiO 2 performance in photocatalytic hydrogen evolution but are thermodynamically unstable relative to pure TiO 2 in humid/aqueous environment. Furthermore, first principles molecular dynamics simulations of the TiO (001)-water and anatase (001)-water interfaces show that unlike the multilayer structure of interfacial water on the anatase surface, a very dense and tightly packed first water layer is present on the surface of TiO, which could represent the first stage of partial surface reoxidation.

36 MATERIALS SCIENCE↗

Experimental and modeling study of 1/ f noise in multilayer MoS2 and MoSe2 field-effect transistors

In field-effect transistors (FETs) with two-dimensional (2D) transition metal dichalcogenide channels, the dependence of field-effect mobility on atomic layer thickness has been studied and interpreted in terms of interface scattering and interlayer coupling resistance (Rint). However, a model for 1/f noise, such as in MoS2 and in MoSe2 FETs, for various contact metals and layer number thicknesses has not been reported. In this work, we have experimentally studied current–voltage and 1/f noise on MoS2 and MoSe2 FETs with source and drain contacts of high and low work function metals to understand both the mobility and the noise behavior. We have developed a noise model incorporating layer number dependent Hooge parameters and Rint. The noise and mobility models utilize screening lengths for charge, mobility, and Hooge parameter to describe the variation of these quantities with a layer number. Using our single model topology with appropriate fitting parameters for each material and each contact metal, the model captures the experimentally observed layer thickness dependence of the Hooge parameter. Our noise analysis is fully comprehensive and, hence, could be applied to any 2D layered systems.

Kwon, Jiseok↗

Resolving surface potential variation in Ge/MoS 2 heterostructures with Kelvin probe force microscopy

In this work, we employ an atomic force microscopy-based technique, Kelvin probe force microscopy, to analyze heterogeneities of four different 2D/3D Ge/MoS 2 heterostructures with Ge chemical vapor deposition (CVD) time. High-contrast spatially resolved contact potential difference (CPD) maps reveal the evolution of the samples by Ge deposition. The CPD map in an as-prepared sample does not display any heterogeneity, but CPD contrasts along the grain boundaries are obviously noticed as Ge is deposited on MoS 2 . With a sufficiently long Ge CVD deposition time, strong grain-to-grain CPD variations over the 2D/3D heterostructures are observed. The results show the variations of the work function from grain to grain that are attributed to the strain induced by the Ge island formation on the cracked MoS2 initiated by sulfur vacancies.

36 MATERIALS SCIENCE↗

Interface formation and Schottky barrier height for Y, Nb, Au, and Pt on Ge as determined by hard x-ray photoelectron spectroscopy

Development of a robust, thin, hole-blocking (n+) contact on high purity germanium (HPGe) has been the main challenge in the development of Ge-based radiation sensors. Yttrium has been reported to be a viable hole-blocking contact on HPGe, and detectors with low leakage have been fabricated. Niobium has also been considered as a potential hole-blocking contact due to its low work function. Here, we investigate interface chemistry and the Schottky barrier height of Y and Nb, as well as electron-blocking contacts Au and Pt, on Ge(100) surfaces using hard x-ray photoelectron spectroscopy. We find a barrier height of 1.05 ± 0.10 eV for Y/HPGe, confirming the formation of a hole-blocking barrier. For Nb/HPGe, the barrier height of 0.13 ± 0.10 eV demonstrates that the interface is not hole-blocking. The Schottky barrier of Au and Pt was found to be 0.45 ± 0.10 and 0.51 ± 0.10 eV, respectively.

36 MATERIALS SCIENCE↗

Dimensional analysis on microscale gas breakdown with electric field nonuniformity and positive space charge effects

A dimensional method was employed to evaluate the microscale gas breakdown characteristics at atmospheric pressure, resulting in a universal breakdown curve applicable to different types of gases (e.g., Ar, Xe, Ne, and N2). As the gap distance decreases, the breakdown mode transitions from ion-induced secondary electron emission to the field emission regime. In the field emission regime, the positive space charge effect becomes more significant. We discovered that incorporating the positive space charge effect in the field emission regime can be achieved by modifying the local electric field enhancement factor β. Consequently, we propose an effective electric field enhancement factor, βeff, which scales linearly with β, to accurately reproduce the breakdown curve while considering the positive space charge effect. This proposed approach significantly simplifies the numerical model. Additionally, we examined the effects of gas pressure, gap distance, cathode properties (e.g., work function and secondary electron emission coefficient), and electric field nonuniformity.

Physics↗

Electrical and thermal characteristics of LaB6 thermionic hollow cathodes operating in He, D2, Ar, and Xe at 4–200 Pa and 0.25–5 A cm−2

We report characteristics of lanthanum hexaboride (LaB6) cathodes for conditions relevant to a high-voltage, high-current switching device. LaB6 is selected because of its relatively low work function, stability in the presence of many common gas impurities, and a low evaporation rate (long life) at operating temperatures. We have investigated the effect of cathode geometry, gas type, pressure, and current on a LaB6 hollow cathode in a diode configuration with an opposing planar anode. The gas is stagnant at a relatively low pressure of 4–200 Pa (0.03–1.5 Torr) because of device high-voltage standoff requirements. In all cases, the plasma voltage decreases to a plateau value with increasing current where a practical device would operate. The plateau voltage aligns with the fill gas excitation or ionization voltage, depending on conditions. At high current, the cathode temperature exceeds that required for thermionic emission to supply the total current, a behavior that is understood by accounting for back-diffusing bulk electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of a LaB6 tip as a thermionically enhanced photoemitter

There is a widespread interest in time-resolved electron spectroscopies such as ultrafast electron diffraction, ultrafast electron microscopy, and ultrafast electron energy loss spectroscopy. These techniques require pulsed electron beams with both high current and brightness. LaB6 is commonly used as a thermionic emitter because of its low work function and high electron yield. However, its use as a pulsed photocathode has not been widely explored. Here, we present measurements of the electron yield from a LaB6 filament exposed to 392 nm UV ultrafast laser pulses under a wide range of filament temperatures. We find that sample heating strongly enhances photoelectron yield, an effect known as thermionically enhanced photoemission. However, it also creates potentially undesirable, continuous thermionic background. We conclude that the ideal optimal operating conditions strongly depend on the type of measurement and require defining and quantifying an appropriate figure of merit.

Physics↗