Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities

Isothermal compression experiment of AZ80 magnesium alloy was conducted by Gleeble thermo-mechanical simulator in order to quantitatively investigate the work hardening (WH), strain rate sensitivity (SRS) and temperature sensitivity (TS) during hot processing of magnesium alloys. The WH, SRS and TS were described by Zener-Hollomon parameter (Z) coupling of deformation parameters. The relationships between WH rate and true strain as well as true stress were derived from Kocks-Mecking dislocation model and validated by our measurement data. The slope defined through the linear relationship of WH rate and true stress was only related to the annihilation coefficient Ω. Obvious WH behavior could be exhibited at a higher Z condition. Furthermore, we have identified the correlation between the microstructural evolution including β-Mg17Al12 precipitation and the SRS and TS variations. Intensive dynamic recrystallization and homogeneous distribution of β-Mg17Al12 precipitates resulted in greater SRS coefficient at higher temperature. The deformation heat effect and β-Mg17Al12 precipitate content can be regarded as the major factors determining the TS behavior. At low Z condition, the SRS becomes stronger, in contrast to the variation of TS. The optimum hot processing window was validated based on the established SRS and TS values distribution maps for AZ80 magnesium alloy.

36 MATERIALS SCIENCE↗

Enhanced working memory performance via transcranial direct current stimulation: The possibility of near and far transfer

Although working memory (WM) training programs consistently result in improvement on the trained task, benefit is typically short-lived and extends only to tasks very similar to the trained task (i.e., near transfer). It is possible that pairing repeated performance of a WM task with brain stimulation encourages plasticity in brain networks involved in WM task performance, thereby improving the training benefit. In the current study, transcranial direct current stimulation (tDCS) was paired with performance of a WM task (n-back). In Experiment 1, participants performed a spatial location-monitoring n-back during stimulation, while Experiment 2 used a verbal identity-monitoring n-back. In each experiment, participants received either active (2.0 mA) or sham (0.1 mA) stimulation with the anode placed over either the right or the left dorsolateral prefrontal cortex (DLPFC) and the cathode placed extracephalically. In Experiment 1, only participants receiving active stimulation with the anode placed over the right DLPFC showed marginal improvement on the trained spatial n-back, which did not extend to a near transfer (verbal n-back) or far transfer task (a matrix-reasoning task designed to measure fluid intelligence). Here, in Experiment 2, both left and right anode placements led to improvement, and right DLPFC stimulation resulted in numerical (though not sham-adjusted) improvement on the near transfer (spatial n-back) and far transfer (fluid intelligence) task. Results suggest that WM training paired with brain stimulation may result in cognitive enhancement that transfers to performance on other tasks, depending on the combination of training task and tDCS parameters used.

60 APPLIED LIFE SCIENCES↗

Reconciling Work Functions and Adsorption Enthalpies for Implicit Solvent Models: A Pt (111)/Water Interface Case Study

Implicit solvent models are a computationally efficient method of representing solid/liquid interfaces prevalent in electrocatalysis, energy storage, and materials science. However, electronic structure changes induced at the metallic surface by the dielectric continuum are not fully understood. To address this, we perform DFT calculations for the Pt(111)/water interface, in order to compare Poisson–Boltzmann continuum solvation methods with ab initio molecular dynamics (AIMD) simulations of explicit solvent. We show that the implicit solvent cavity can be parametrized in terms of the electric dipole moment change at the equilibrated explicit Pt/water interface to obtain the potential of zero charge (PZC). We also compare the accuracy of aqueous enthalpies of adsorption of phenol on Pt(111) using geometry and charge density based dielectric cavitation methods. The ability to parametrize the cavity according to individual atoms, as afforded in the geometry based approach, is key to obtaining accurate enthalpy changes of adsorption under aqueous conditions. Additionally, we show that the electronic structure changes induced by explicit solvent and our proposed implicit solvent parametrization scheme yield comparable density difference profiles and d-band projected density of states. We therefore demonstrate the capability of implicit solvent approaches to capture both the energetics of adsorption processes and the main electronic effects of aqueous solvent on the metallic surface. Therefore, this work provides a scheme for computationally efficient simulations of interfacial processes for applications in areas such as heterogeneous catalysis and electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effective work function lowering of multilayer graphene films by subnanometer thick AlO{sub x} overlayers

A simple method for controlling the effective work function (WF) of conductive multilayer graphene (MLG) film, synthesized by using chemical vapor deposition and transferred to a dielectric substrate, was developed. The WFs of the MLG during the step-by-step deposition of aluminum (Al) were measured using in situ ultraviolet photoelectron spectroscopy. Core-level spectra were also collected to investigate the chemical reaction that occurred when a small amount of Al was deposited onto MLG in a stepwise manner. The measurements revealed that the effective WF of the conductive MLG film could be controlled from 3.77 to 4.40 eV by the deposition of an Al layer less than 0.6 nm thick.

36 MATERIALS SCIENCE↗

Bare-tether cathodic contact through thermionic emission by low-work-function materials

A new material, C12A7:e{sup -} electride, which might present a work function as low as 0.6 eV and moderately high temperature stability, was recently proposed as coating for floating bare tethers. Arising from heating under space operation, current is emitted by thermionic emission along a thus coated cathodic segment. A preliminary study on the space-charge-limited (SCL) double layer in front of the cathodic segment is presented using Langmuir's SCL electron current between cylindrical electrodes and orbital-motion-limited ion-collection sheath. A detailed calculation of current and bias profiles along the entire tether length is carried out with ohmic effects and the transition from SCL to full Richardson-Dushman emission included. Analysis shows that in the simplest drag mode, under typical orbital and tether conditions, thermionic emission leads to a short cathodic section and may eliminate the need for an active cathodic device and its corresponding gas feed requirements and power subsystem, which results in a truly 'propellant-less' tether system for such basic applications as de-orbiting low earth orbit satellites.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determination of effective work function of Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3} and Pt films on ZrO{sub x} using terraced-oxide method

We have determined the effective work function ({Phi}{sub m,eff}) of thin-film sputter-deposited Pr{sub 0.7}Ca{sub 0.3}MnO{sub 3} (PCMO) on atomic-layer-deposited ZrO{sub x}. Pt/PCMO/ZrO{sub x}/SiO{sub 2}/Si and Pt/ZrO{sub x}/SiO{sub 2}/Si metal-oxide-semiconductor (MOS) capacitors were fabricated. The {Phi}{sub m,eff} were extracted from capacitance-voltage curves of the MOS capacitors by using flat-band voltage versus effective-oxide-thickness plots. PCMO was crystallized using a high-temperature anneal step and crystallinity was confirmed by x-ray diffraction and transmission electron microscopy. {Phi}{sub m,eff} of polycrystalline PCMO and Pt on ZrO{sub x} was determined to be 5.43 eV and 5.40 eV, respectively. The significantly higher {Phi}{sub m,eff} of PCMO is attributed to the presence of oxygen-rich PCMO(002)/ZrO{sub x} interfaces as indicated by our density-functional-theory calculations.

36 MATERIALS SCIENCE↗

Tuning of noble metal work function with organophosphonate nanolayers

We demonstrate that weak chemical interactions between untethered moieties in molecular nanolayers on metal surfaces can strongly influence the effective work function Φ{sub eff}. Electron spectroscopy shows that nanolayers of mercaptan-anchored organophosphonates on Au and Pt decrease Φ{sub eff}. The measured Φ{sub eff} shifts correlate with the chemical state of phosphonic acid moieties, and scale with molecular length. These results are contrary to predictions of ab initio calculations of monolayer-capped surfaces, but are consistent with calculations of bilayer-capped surfaces with face-to-face hydrogen-bonded phosphonic acid moieties. Our findings indicate that intra-layer bonding and layering in molecular nanolayers can be key to tailoring heterointerfacial electronic properties for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Protection of MoO{sub 3} high work function by organic thin film

The effects of air exposure are investigated for molybdenum trioxide (MoO{sub 3}) covered with organic thin films using ultraviolet photoemission spectroscopy. It is found that the severe drop of the work function of MoO{sub 3} by air exposure is substantially reduced by the organic thin films. Both CuPc and C{sub 60} are used for the investigations. The results indicate that the MoO{sub 3} surface can be passivated by approximately two monolayers of organic thin films against exposure to air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Work function tuning of plasma-enhanced atomic layer deposited WC{sub x}N{sub y} electrodes for metal/oxide/semiconductor devices

One of the main challenges facing the integration of metals as gate electrodes in advanced MOS devices is control over the Fermi level position at the metal/dielectric interface. In this study, we demonstrate the ability to tune the effective work function (EWF) of W-based electrodes by process modifications of the atomic layer deposited (ALD) films. Tungsten carbo-nitrides (WC{sub x}N{sub y}) films were deposited via plasma-enhanced and/or thermal ALD processes using organometallic precursors. The process modifications enabled us to control the stoichiometry of the WC{sub x}N{sub y} films. Deposition in hydrogen plasma (without nitrogen based reactant) resulted in a stoichiometry of WC{sub 0.4} with primarily W-C chemical bonding, as determined by x-ray photoelectron spectroscopy. These films yielded a relatively low EWF of 4.2 ± 0.1 eV. The introduction of nitrogen based reactant to the plasma or the thermal ALD deposition resulted in a stoichiometry of WC{sub 0.1}N{sub 0.6–0.8} with predominantly W-N chemical bonding. These films produced a high EWF of 4.7 ± 0.1 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: Work function change measurement via improved Anderson method

We propose the modification to the Anderson method of work function change (Δϕ) measurements. In this technique, the kinetic energy of the probing electrons is already low enough for non-destructive investigation of delicate molecular systems. However, in our implementation, all electrodes including filament of the electron gun are polarized positively. As a consequence, electron bombardment of any elements of experimental system is eliminated. Our modification improves cleanliness of the ultra-high vacuum system. As an illustration of the solution capabilities, we present Δϕ of the Ag(100) surface induced by cobalt phthalocyanine layers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improved open-circuit voltage in Cu(In,Ga)Se{sub 2} solar cells with high work function transparent electrodes

Hydrogenated indium oxide (IOH) is implemented as transparent front contact in Cu(In,Ga)Se{sub 2} (CIGS) solar cells, leading to an open circuit voltage V{sub OC} enhanced by ∼20 mV as compared to reference devices with ZnO:Al (AZO) electrodes. This effect is reproducible in a wide range of contact sheet resistances corresponding to various IOH thicknesses. We present the detailed electrical characterization of glass/Mo/CIGS/CdS/intrinsic ZnO (i-ZnO)/transparent conductive oxide (TCO) with different IOH/AZO ratios in the front TCO contact in order to identify possible reasons for the enhanced V{sub OC}. Temperature and illumination intensity-dependent current-voltage measurements indicate that the dominant recombination path does not change when AZO is replaced by IOH, and it is mainly limited to recombination in the space charge region and at the junction interface of the solar cell. The main finding is that the introduction of even a 5 nm-thin IOH layer at the i-ZnO/TCO interface already results in a step-like increase in V{sub OC}. Two possible explanations are proposed and verified by one-dimensional simulations using the SCAPS software. First, a higher work function of IOH as compared to AZO is simulated to yield an V{sub OC} increase by 21 mV. Second, a lower defect density in the i-ZnO layer as a result of the reduced sputter damage during milder sputter-deposition of IOH can also add to a maximum enhanced V{sub OC} of 25 mV. Our results demonstrate that the proper choice of the front TCO contact can reduce the parasitic recombination and boost the efficiency of CIGS cells with improved corrosion stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Work function contrast and energy band modulation between amorphous and crystalline Ge{sub 2}Sb{sub 2}Te{sub 5} films

The work function (WF) is of crucial importance to dominate the carrier transport properties of the Ge-Sb-Te based interfaces. In this letter, the electrostatic force microscopy is proposed to extract the WF of Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) films with high spatial and energy resolution. The measured WF of as-deposited amorphous GST is 5.34 eV and decreases drastically after the amorphous GST is crystallized by annealing or laser illumination. A 512 × 512 array 2D-WF map is designed to study the WF spatial distribution and shows a good consistency. The WF contrast between a-GST and c-GST is ascribed to band modulation, especially the modification of electron affinity including the contribution of charges or dipoles. Then, the band alignments of GST/n-Si heterostructures are obtained based on the Anderson's rule. Due to the band modulation, the I-V characteristics of a-GST/Si heterojunction and c-GST/Si heterojunction are very different from each other. The quantitative relationship is calculated by solving the Poisson's equation, which agrees well with the I-V measurements. Our findings not only suggest a way to further understand the electrical transport properties of Ge-Sb-Te based interfaces but also provide a non-touch method to distinguish crystalline area from amorphous matrix with high spatial resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanocluster ionization energies and work function of aluminum, and their temperature dependence

Ionization threshold energies of Al{sub n} (n = 32-95) nanoclusters are determined by laser ionization of free neutral metal clusters thermalized to several temperatures in the range from 65 K to 230 K. The photoion yield curves of cold clusters follow a quadratic energy dependence above threshold, in agreement with the Fowler law of surface photoemission. Accurate data collection and analysis procedures make it possible to resolve very small (few parts in a thousand) temperature-induced shifts in the ionization energies. Extrapolation of the data to the bulk limit enables a determination of the thermal shift of the polycrystalline metal work function, found to be in excellent agreement with theoretical prediction based on the influence of thermal expansion. Small clusters display somewhat larger thermal shifts, reflecting their greater susceptibility to thermal expansion. Ionization studies of free size-resolved nanoclusters facilitate understanding of the interplay of surface, electronic, and lattice properties under contamination-free conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Work function tuning at Au-HfO{sub 2} interfaces using organophosphonate monolayers

We show that introducing organophosphonate nanomolecular monolayers (NMLs) at Au-HfO{sub 2} interfaces shift the effective work function by 0.2 eV ≥ ΔΦ{sub eff} ≥ −0.6 eV, due to NML body and bonding dipoles. Electron spectroscopy of NML-Au, NML-HfO{sub 2,} and Au-NML-HfO{sub 2} structures indicate that the Au-NML bond strength is the major factor. Au-NML covalent bonding yields ΔΦ{sub eff} ∼ − 0.2 eV, while weak bonding yields ΔΦ{sub eff} ∼ 0.6 eV. In contrast, NMLs on HfO{sub 2} decrease Φ{sub eff} by ∼0.4 eV due to competing contributions from NML-HfO{sub 2} bonding strength and NML orientation. These findings are relevant for nanomolecularly tailoring the electronic properties of metal–ceramic interfaces for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cross-sectoral synergies for household energy savings: the role of electric vehicles, solar photovoltaics, and remote work

Over the past two decades, new technologies and behavioral shifts – such as electric vehicles, solar photovoltaics, and increased work-from-home practices – have reshaped residential electricity consumption and cost. However, their combined or synergistic impact on a household’s electricity cost remains unexplored. Leveraging data from the 2020 Residential Energy Consumption Survey, this study uses a structural equation model to unravel the extent to which the bundled adoption of EV-PV and stay-at-home decisions impact the total electricity cost of households. Results indicate that adopting both EVs and PV reduces electricity costs by 31% despite a 16% rise in consumption. When combined with stay-at-home practices, households still experience a 13% cost reduction, even with a 25% increase in electricity consumption. In conclusion, these findings suggest that financial savings are not merely a byproduct of adopting new technologies or behavioral changes but could serve as a key consideration for household contemplating engagement with multiple modern energy solutions simultaneously.

14 SOLAR ENERGY↗

Spatially Resolved Characterisation of Low Mass Fraction Uranium Glass Working Reference Materials

Here, we present the results of a study to generate reference glasses that reflect an environment analogous to historic nuclear fallout samples of interest for post-detonation nuclear forensics. The glasses were generated by melting and then quenching SiO 2 , Al 2 O 3 and CaCO 3 powders. Two suites of glasses with three distinct U isotopic ratios were successfully made with enrichments in the 235 U isotope (~ natural [0.72%], ~ 53% and 94%), but the bulk elemental data showed heterogeneity (~ 10% RSD) with U mass fractions ranging from 331.47 to 373.63 μg g -1 . Spatially resolved U isotopic measurements were performed using three mass spectrometry techniques (secondary ion mass spectrometry-single stage accelerator mass spectrometry [SIMS-SSAMS], large geometry [LG] - SIMS, and laser ablation-inductively coupled plasma-mass spectrometry [LA-ICP-MS]) across five National Laboratories. The results showed good agreement with the bulk U isotopic data for the low, medium, and high U mass fractions. We conclude that despite elemental heterogeneity, these samples can serve as useful working reference materials for spatially resolved nuclear fallout analyses, as well as for other related spatially resolved analyses.

36 MATERIALS SCIENCE↗

Effect of Electron–Phonon Interaction on the Conductivity and Work Function of Epitaxial Graphene

In the context of the cluster model of epitaxial graphene, the condition for a stepwise change in the charge of carbon atoms under the action of graphene–substrate electron–phonon interaction and an external electric field is derived. Such charge transfer brings about corresponding steps of the static conductivity and work function of epitaxial graphene. Numerical estimates for the case of weak coupling of quasi-free graphene with metal and semiconductor substrates are given.

36 MATERIALS SCIENCE↗

More on the Effect of Vacancies on Metal Characteristics. Work Function and Surface Energy

Within the density functional method, a simple method for determining the dependence of the work function of electrons and specific surface energy of the metal on the relative density of internal vacancies c{sub v} is proposed. Preserving the style of the stabilized jellium model, the preliminarily calculated volume shift of the conductivity zone bottom ε{sup (0)} ∝ c{sub v} in a specific homogeneous metal is introduced into a one-dimensional functional as the zero-point energy. Using the quantity c{sub v} as a small parameter, linear corrections to the abovementioned quantities are found. The expansion coefficients are expressed in terms of characteristics of a defectless metal. Calculations for Na and Al are carried out by the Kohn–Sham method. Temperature dependences of Al characteristics have been constructed in the thermodynamic limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗