Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VECTOR SPACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Spontaneous symmetry breaking in general relativity. Vector order parameter

Gravitational properties of a hedgehog-type topological defect in two extra dimensions are considered in general relativity using a vector as the order parameter. All previous considerations were done using the order parameter in the form of a multiplet in the target space of scalar fields. The difference of these two approaches is analyzed and demonstrated in detail. Regular solutions to the Einstein equations are studied analytically and numerically. It is shown that the existence of a negative cosmological constant is sufficient for the spontaneous symmetry breaking of the initially flat bulk. Regular configurations have an increasing gravitational potential and are able to trap the matter on the brane. If the energy of spontaneous symmetry breaking is high, the gravitational potential has several minimum points. Spinless particles that are identical in the uniform bulk, being trapped at separate minima, acquire different masses and appear to the observer on the brane as different particles with integer spins.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dispersive analysis of K{sub L{mu}3} and K{sub Le3} scalar and vector form factors using KTeV data

Using the published KTeV samples of K{sub L{yields}{pi}}{sup {+-}e{+-}{nu}}and K{sub L{yields}{pi}}{sup {+-}{mu}{+-}{nu}}decays, we perform a reanalysis of the scalar and vector form factors based on the dispersive parametrization. We obtain phase-space integrals I{sub K}{sup e}=0.154 46{+-}0.000 25 and I{sub K}{sup {mu}=}0.102 19{+-}0.000 25. For the scalar form factor parametrization, the only free parameter is the normalized form factor value at the Callan-Treiman point (C); our best-fit results in lnC=0.1915{+-}0.0122. We also study the sensitivity of C to different parametrizations of the vector form factor. The results for the phase-space integrals and C are then used to make tests of the standard model. Finally, we compare our results with lattice QCD calculations of F{sub K}/F{sub {pi}}and f{sub +}(0).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stringy models of modified gravity: space-time defects and structure formation

Starting from microscopic models of space-time foam, based on brane universes propagating in bulk space-times populated by D0-brane defects (''D-particles''), we arrive at effective actions used by a low-energy observer on the brane world to describe his/her observations of the Universe. These actions include, apart from the metric tensor field, also scalar (dilaton) and vector fields, the latter describing the interactions of low-energy matter on the brane world with the recoiling point-like space-time defect (D-particle). The vector field is proportional to the recoil velocity of the D-particle and as such it satisfies a certain constraint. The vector breaks locally Lorentz invariance, which however is assumed to be conserved on average in a space-time foam situation, involving the interaction of matter with populations of D-particle defects. In this paper we clarify the role of fluctuations of the vector field on structure formation and galactic growth. In particular we demonstrate that, already at the end of the radiation era, the (constrained) vector field associated with the recoil of the defects provides the seeds for a growing mode in the evolution of the Universe. Such a growing mode survives during the matter dominated era, provided the variance of the D-particle recoil velocities on the brane is larger than a critical value. We note that in this model, as a result of specific properties of D-brane dynamics in the bulk, there is no issue of overclosing the brane Universe for large defect densities. Thus, in these models, the presence of defects may be associated with large-structure formation. Although our string inspired models do have (conventional, from a particle physics point of view) dark matter components, nevertheless it is interesting that the role of ''extra'' dark matter is also provided by the population of massive defects. This is consistent with the weakly interacting character of the D-particle defects, which predominantly interact only gravitationally.

79 ASTRONOMY AND ASTROPHYSICS↗

A flippon related singlet at the LHC II

Here, we consider the 750 GeV diphoton resonance at the 13 TeV LHC in the ℱ-SU(5) model with a Standard Model (SM) singlet field which couples to TeV-scale vector-like particles, dubbed flippons . This singlet field assumes the role of the 750 GeV resonance, with production via gluon fusion and subsequent decay to a diphoton via the vector-like particle loops. We present a numerical analysis showing that the observed 8 TeV and 13 TeV diphoton production cross-sections can be generated in the model space with realistic electric charges and Yukawa couplings for light vector-like masses. We further discuss the experimental viability of light vector-like masses in a General No-Scale ℱ-SU(5) model, offering a few benchmark scenarios in this consistent GUT that can satisfy all experimental constraints imposed by the LHC and other essential experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computationally Directed Discovery of MoBi 2

Incorporating bismuth, the heaviest element stable to radioactive decay, into new materials enables the creation of emergent properties such as permanent magnetism, superconductivity, and nontrivial topology. Understanding the factors that drive Bi reactivity is critical for the realization of these properties. Using pressure as a tunable synthetic vector, we can access unexplored regions of phase space to foster reactivity between elements that do not react under ambient conditions. Furthermore, combining computational and experimental methods for materials discovery at high-pressures provides broader insight into the thermodynamic landscape than can be achieved through experiment alone, informing our understanding of the dominant chemical factors governing structure formation. Herein, we report our combined computational and experimental exploration of the Mo–Bi system, for which no binary intermetallic structures were previously known. Using the ab initio random structure searching (AIRSS) approach, we identified multiple synthetic targets between 0–50 GPa. Highpressure in situ powder X-ray diffraction experiments performed in diamond anvil cells confirmed that Mo–Bi mixtures exhibit rich chemistry upon the application of pressure, including experimental realization of the computationally predicted CuAl 2 -type MoBi 2 structure at 35.8(5) GPa. Electronic structure and phonon dispersion calculations on MoBi 2 revealed a correlation between valence electron count and bonding in high-pressure transition metal–Bi structures as well as identified two dynamically stable ambient pressure polymorphs. Our study demonstrates the power of the combined computational–experimental approach in capturing highpressure reactivity for efficient materials discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Holonomy and parallel transport in the differential geometry of loop spaces and generalized gauge transformations

The motivation of this paper stems from the need to construct explicit isomorphisms of (possibly nontrivial) principal G-bundles on the space of loops or, more generally, of paths in some manifold M, over which we consider a fixed principal bundle P; the aforementioned bundles are then pull backs of P with respect to evaluation maps at different points. The explicit construction of these isomorphisms between pulled-back bundles relies on the notion of parallel transport. We introduce and discuss extensively at this point the notion of generalized gauge transformation between (a priori) different principal G-bundles over the same base M, and we see immediately that the parallel transport is a generalized gauge transformation for two special kinds of bundles on the space of loops or paths; at this point, we may try and generalize the previous arguments for more general pulled-back bundles. Finally, we discuss how flatness of the reference connection, with respect to which we consider parallel transport, is related to horizontality of the associated generalized gauge transformation.

97 MATHEMATICS AND COMPUTING↗

Quantization of a symplectic manifold associated to a manifold with projective structure

Let X be a complex manifold equipped with a projective structure P. There is a holomorphic principal C*-bundle L{sub P}{sup '} over X associated with P. We show that the holomorphic cotangent bundle of the total space of L{sub P}{sup '} equipped with the Liouville symplectic form has a canonical deformation quantization. This generalizes the construction in the work of and Ben-Zvi and Biswas [''A quantization on Riemann surfaces with projective structure,'' Lett. Math. Phys. 54, 73 (2000)] done under the assumption that dim{sub C} X=1.

97 MATHEMATICS AND COMPUTING↗

Solar system constraints on planetary Coriolis-type effects induced by rotation of distant masses

We phenomenologically put local constraints on the rotation of distant masses by using the planets of the solar system. First, we analytically compute the orbital secular precessions induced on the motion of a test particle about a massive primary by a Coriolis-like force, treated as a small perturbation, in the case of a constant angular velocity vector Ψ directed along a generic direction in space. The semimajor axis a and the eccentricity e of the test particle do not secularly change, contrary to the inclination I, the longitude of the ascending node Ω, the longitude of the pericenter varpi and the mean anomaly M. Then, we compare our prediction for (dot varpi) with the corrections Δdot varpi to the usual perihelion precessions of the inner planets recently estimated by fitting long data sets with different versions of the EPM ephemerides. We obtain as preliminary upper bounds |Ψ{sub z}| ≤ 0.0006−0.013 arcsec cty{sup −1}, |Ψ{sub x}| ≤ 0.1−2.7 arcsec cty{sup −1}, |Ψ{sub y}| ≤ 0.3−2.3 arcsec cty{sup −1}. Interpreted in terms of models of space-time involving cosmic rotation, our results are able to yield constraints on cosmological parameters like the cosmological constant Λ and the Hubble parameter H{sub 0} not too far from their values determined with cosmological observations and, in some cases, several orders of magnitude better than the constraints usually obtained so far from space-time models not involving rotation. In the case of the rotation of the solar system throughout the Galaxy, occurring clockwise about the North Galactic Pole, our results for Ψ{sub z} are in disagreement with the expected value of it at more than 3−σ level. Modeling the Oort cloud as an Einstein-Thirring slowly rotating massive shell inducing Coriolis-type forces inside yields unphysical results for its putative rotation.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure of Charge Density Waves in La1.875Ba0.125CuO4

Although charge-density wave (CDW) correlations exist in several families of cuprate superconductors, they exhibit substantial variation in CDW wavevector and correlation length, indicating a key role for CDW-lattice interactions. We investigated this interaction in La1.875Ba0.125CuO4 using single crystal x-ray diffraction to collect a large number of CDW peak intensities, and determined the Cu and La/Ba atomic distortions induced by the formation of CDW order. Within the CuO2 planes, the distortions involve a periodic modulation of the Cu-Cu spacing along the direction of the ordering wave vector. The charge ordering within the copper-oxygen layer induces an out-of-plane breathing modulation of the surrounding lanthanum layers, which leads to a related distortion on the adjacent copper-oxygen layer. Our result implies that the CDW-related structural distortions do not remain confined to a single layer but rather propagate an appreciable distance through the crystal. This leads to overlapping structural modulations, in which CuO2 planes exhibit distortions arising from the orthogonal CDWs in adjacent layers as well as distortions from the CDW within the layer itself. We attribute this striking effect to the weak c-axis charge screening in cuprates and suggest this effect could help couple the CDW between adjacent planes in the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantitative relationship between polarization differences and the zone-averaged shift photocurrent

A relationship is derived between differences in electric polarization between bands and the “shift vector” that controls part of a material's bulk photocurrent, then demonstrated in several models. Electric polarization has a quantized gauge ambiguity and is normally observed at surfaces via the surface charge density, while shift current is a bulk property and is described by shift vector gauge invariant at each point in momentum space. They are connected because the same optical transitions that are described in shift currents pick out a relative gauge between valence and conduction bands. We also discuss subtleties arising when there are points at the Brillouin zone where optical transitions are absent. Finally, we conclude that two-dimensional materials with significant interband polarization differences should have high bulk photocurrent, meaning that the modern theory of polarization can be used as a straightforward way to search for bulk photovoltaic material candidates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Results and forecasts on cosmic inflation from weak lensing

Here, we highlight the role of weak lensing measurements from current and upcoming stage-IV imaging surveys in the search for cosmic inflation, specifically in measuring the scalar spectral index n s . To do so, we combine the Dark Energy Survey 3 years of observation weak lensing and clustering data with Bicep/Keck, Planck, and Sloan Digital Sky Survey data in r⁢Λ⁢ CDM (cold dark matter) where r is the tensor-to-scalar ratio. While there is no significant improvement in constraining power, we obtain a 1⁢σ shift on n s . Additionally, we forecast a weak lensing and clustering data vector from the 10-year Legacy Survey of Space and Time by the Vera C. Rubin Observatory and show its combination with current data would improve their n s constraints by 25% in r⁢Λ⁢ CDM.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanical properties of interacting lipopolysaccharide membranes from bacteria mutants studied by specular and off-specular neutron scattering

Specular and off-specular neutron scattering are used to study the influence of molecular chemistry (mutation) on the intermembrane interactions and mechanical properties of the outer membrane of Gram-negative bacteria consisting of lipopolysaccharides (LPSs). For this purpose, solid-supported multilayers of mutant LPS membranes are deposited on silicon wafers and hydrated either at defined humidity or in bulk buffers. The planar sample geometry allows to identify out-of-plane and in-plane scattering vector components. The measured two-dimensional reciprocal space maps are simulated with membrane displacement correlation functions determined by two mechanical parameters (vertical compression modulus and bending rigidity) and an effective cutoff radius for the membrane fluctuation wavelength. Experiments at controlled humidity enable one to examine the influence of the disjoining pressure on the saccharide-mediated intermembrane interactions, while experiments in bulk buffers (i.e., in the absence of an external osmotic stress) reveal the effect of divalent cations on LPS membranes, highlighting the role of divalent cations in the survival mechanism of bacteria in the presence of antimicrobial molecules.

60 APPLIED LIFE SCIENCES↗

Charge-Lattice Coupling in Hole-Doped LuFe 2 O 4 + δ : The Origin of Second-Order Modulation

Understanding singularities in ordered structures, such as dislocations in lattice modulation and solitons in charge ordering, offers great opportunities to disentangle the interactions between the electronic degrees of freedom and the lattice. Specifically, a modulated structure has traditionally been expressed in the form of a discrete Fourier series with a constant phase and amplitude for each component. We report atomic scale observation and analysis of a new modulation wave in hole-doped ${\mathrm{LuFe}}_{2}{\mathrm{O}}_{4+{\delta}}$ that requires significant modifications to the conventional modeling of ordered structures. This new modulation with an unusual quasiperiodic singularity can be accurately described only by introducing a well-defined secondary modulation vector in both the phase and amplitude parameter spaces. Correlated with density-functional-theory (DFT) calculations, our results reveal that those singularities originate from the discontinuity of lattice displacement induced by interstitial oxygen in the system. The approach of our work is applicable to a wide range of ordered systems, advancing our understanding of the nature of singularity and modulation.

36 MATERIALS SCIENCE↗

SU-F-P-18: Development of the Technical Training System for Patient Set-Up Considering Rotational Correction in the Virtual Environment Using Three-Dimensional Computer Graphic Engine

Purpose: Patient set-up skills in radiotherapy treatment room have a great influence on treatment effect for image guided radiotherapy. In this study, we have developed the training system for improving practical set-up skills considering rotational correction in the virtual environment away from the pressure of actual treatment room by using three-dimensional computer graphic (3DCG) engine. Methods: The treatment room for external beam radiotherapy was reproduced in the virtual environment by using 3DCG engine (Unity). The viewpoints to perform patient set-up in the virtual treatment room were arranged in both sides of the virtual operable treatment couch to assume actual performance by two clinical staffs. The position errors to mechanical isocenter considering alignment between skin marker and laser on the virtual patient model were displayed by utilizing numerical values expressed in SI units and the directions of arrow marks. The rotational errors calculated with a point on the virtual body axis as the center of each rotation axis for the virtual environment were corrected by adjusting rotational position of the body phantom wound the belt with gyroscope preparing on table in a real space. These rotational errors were evaluated by describing vector outer product operations and trigonometric functions in the script for patient set-up technique. Results: The viewpoints in the virtual environment allowed individual user to visually recognize the position discrepancy to mechanical isocenter until eliminating the positional errors of several millimeters. The rotational errors between the two points calculated with the center point could be efficiently corrected to display the minimum technique mathematically by utilizing the script. Conclusion: By utilizing the script to correct the rotational errors as well as accurate positional recognition for patient set-up technique, the training system developed for improving patient set-up skills enabled individual user to indicate efficient positional correction methods easily.

60 APPLIED LIFE SCIENCES↗

Asymptotics of Raynal-Revai coefficients at large hypermomentum

The Raynal-Revai coefficients are studied as the Wigner D functions of O(6) group generated by the kinematical rotation of two reduced Jacobi vectors in six-dimensional three-body space. These coefficients are represented as one-dimensional integrals with kernels equal to double sums of the Clebsh-Gordan coefficients and associated Legendre polynomials. Using this representation we derive the asymptotics of the Raynal-Revai coefficients at large values of the hypermomentum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adaptive Algebraic Multigrid for Finite Element Elliptic Equations with Random Coefficients

This thesis presents a two-grid algorithm based on Smoothed Aggregation Spectral Element Agglomeration Algebraic Multigrid (SA-ρAMGe) combined with adaptation. The aim is to build an efficient solver for the linear systems arising from discretization of second-order elliptic partial differential equations (PDEs) with stochastic coefficients. Examples include PDEs that model subsurface flow with random permeability field. During a Markov Chain Monte Carlo (MCMC) simulation process, that draws PDE coefficient samples from a certain distribution, the PDE coefficients change, hence the resulting linear systems to be solved change. At every such step the system (discretized PDE) needs to be solved and the computed solution used to evaluate some functional(s) of interest that then determine if the coefficient sample is acceptable or not. The MCMC process is hence computationally intensive and requires the solvers used to be efficient and fast. This fact that at every step of MCMC the resulting linear system changes, makes an already existing solver built for the old problem perhaps not as efficient for the problem corresponding to the new sampled coefficient. This motivates the main goal of our study, namely, to adapt an already existing solver to handle the problem (with changed coefficient) with the objective to achieve this goal to be faster and more efficient than building a completely new solver from scratch. Our approach utilizes the local element matrices (for the problem with changed coefficients) to build local problems associated with constructed by the method agglomerated elements (a set of subdomains that cover the given computational domain). We solve a generalized eigenproblem for each set in a subspace spanned by the previous local coarse space (used for the old solver) and a vector, component of the error, that the old solver cannot handle. A portion of the spectrum of these local eigen-problems (corresponding to eigenvalues close to zero) form the coarse basis used to define the new two-level method of our interest. We illustrate the performance of this adaptive two-level procedure with a large set of numerical experiments that demonstrate its efficiency over building the solvers from scratch.

97 MATHEMATICS AND COMPUTING↗

Recursive filter initialization.

Description of an initialization technique which partially accounts for the interrelation between the true-state vector errors when recursive filtering is applied in space navigation systems. The technique reduces the undesirable transient effects of the first few measurements and inhibits filter divergence when the interval between measurements is inordinately large. The key feature of this technique is the inclusion of the effect of a number of pseudo-measurements of certain orbital parameters into the initial covariance matrix. The pseudo-measurement technique has been shown to be useful when reinitialization of the error covariance matrix is required to prevent filter divergence.

Battin, R. H.↗

Structure of turbulence in the presence of uniform shear

The structure of the vorticity field in homogeneous turbulent shear flow is analyzed using a database generated by direct numerical solution of the unsteady Navier-Stokes equations with up to 128x128x128 grid points. For two Reynolds numbers, the probability distribution of the inclination angle of the vorticity vectors, two-point correlations of the velocity and vorticity fields, and the instantaneous vorticity vectors and vortex lines in three-dimensional space were examined. It is shown that homogeneous turbulent shear flow contains a large number of horseshoe vortices. These vortices are most often found in planes inclined at 45 deg to the flow direction and are formed from the roll-up of sheets of transverse vorticity. These findings and similar results obtained in turbulent channel flow, lead to the conclusion that hairpin vortices are the characteristic vortical structures in all turbulent shear flows.

Moin, P.↗