Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “U”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Efficient computational search for lanthanide-binding additive dopants for advanced U-Zr based fuels

A rational design strategy combining theory and experiment is highly desirable for the development of U-Zr based fuels that are resistant to lanthanide-induced fuel-cladding chemical interaction (FCCI). Here, we performed rapid computational screening of FCCI-mitigating (via strong lanthanide-binding) elements across the periodic table by utilizing three simple criteria and density functional theory (DFT) calculated total energies of relevant elements and compounds retrieved from high-throughput DFT databases. In addition to successfully identifying previously demonstrated additives, our search leads to the discovery of Bi as a highly effective element among all 68 elements screened, and its effectiveness was experimentally confirmed in this study.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Beta-delayed gamma spectra compilation and analysis following the thermal-neutron induced fission of 235 U, 239,241 Pu

The integral gamma and electron spectra emitted by fission products, also known as delayed gamma and electron spectra, were measured at Oak Ridge National Laboratory in the 1970s for the thermal-neutron induced fission of 235 U and 239,241 Pu. Scintillator detectors were used to measure these spectra, data used later on to obtain decay heat values - that is, the spectra mean values per unit time as function of time - work that was published in the Nuclear Science and Technology journal; the spectral data, however, was only published in laboratory reports. Here, in this work, we analyze the gamma spectra data using modern methods and nuclear databases to reveal the signature of individual fission products as well as to gauge the performance of the ENDF/B-VIII.0 decay data sub-library, concluding about possible future enhancements in predictive capabilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Short-lived photofission product yields from 238 U and 232 Th at Bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV for nuclear forensics isotope production applications

The existing photofission product yield data sets are often based on nuclear models, and limited experimental measurements of these fission product yields have been performed. These experiments resulted in measured cumulative fission product yields (CFPYs) for 238 U and 232 Th for the bremsstrahlung X-ray endpoint energies of 8, 14, and 20 MeV. The half-lives of the reported fission products range from 1.07–40.8 s. This work is motivated by a demonstrated need for novel isotope production methods for nuclear forensics and improved nuclear data to support the nonproliferation community. A high-purity germanium detector and a pneumatic transfer system were employed for measurements of short-lived fission products, collecting data between cycles of accelerator irradiation and measurement.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Cumulative fission yields of short-lived fission products from 235 U and 239 Pu measured by HPGe gamma-ray spectroscopy

In this study, we present a preliminary investigation focused on determining cumulative fission yields for short-lived fission products. Our analysis involves examining gamma spectra from the irradiated samples of 235 U and 239 Pu using the High Flux Isotope Reactor. The motivation stems from the observed discrepancy in the antineutrino energy spectrum within the range of 5 to 7 MeV. While several hypotheses have been proposed, a thorough analysis of fission yields provides an additional way of gaining insight into this unexplained phenomenon. Our study suggests that the measured gamma rays from 100 Nb, 140 Cs and 95 Sr are consistent with the expected values. However, 93 Rb, 96 Y, 97 Y and 142 Cs cannot be quantified due to insufficient statistics, interference from other gamma rays and the Compton scattering background. Additionally, the calculated cumulative fission yields based on the measured 140 Cs and 95 Sr are found to be consistent with the JEFF3.3 fission yield library. In conclusion, the present work shows that the potential of improving gamma-ray spectroscopy in the fission yields as a means to improve our understanding of the antineutrino spectrum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A reverse 230 U/ 226 Th radionuclide generator for targeted alpha therapy applications

Thorium-226 (half-life 30.6 m) is a radionuclide of interest for use in targeted alpha therapy applications. Additionally, due to its short half-life, 226 Th must be provided through a radionuclide generator system from its parent 230 U (20.8 d). Furthermore, as the half-life of 226 Th is very short, it should be provided in a form that is directly amenable to use in biomedical applications.

226-Th↗
DOE OSTI2021

Detrital U-Pb zircon and 40 Ar/ 39 Ar muscovite geochronology from Middle Pennsylvanian strata in the Anadarko Basin, Texas Panhandle, USA

The Late Mississippian-Permian Anadarko Basin formed in Texas and Oklahoma, USA as the result of inversion of Neoproterozic and Cambrian rift structures. Subsidence was driven by flexural loading of the Amarillo-Wichita Uplift, and this uplift may represent the easternmost element of the Ancestral Rocky Mountains system. The northwestern part of this basin has generally been interpreted to have been filled by sediment derived from the Ancestral Front Range Uplift, ~475 km to the northwest during the early stages of basin filling. We test this model using U-Pb detrital zircon and 40 Ar/ 39 Ar detrital muscovite results from three subsurface samples of the Morrow B sandstone in the northwestern part of the Anadarko Basin. We provide a new maximum depositional age of 310.9 ± 4.9 Ma that indicates the age of the Morrow B to be no older than late Atokan to early Desmoinesian Age (Moscovian), ~10 Myr younger than previously interpreted. In contrast to some previous interpretations, we propose that the most likely source for the sediment in the Morrow B is the Amarillo Uplift to the south. Detrital zircon and detrital muscovite data have age peaks at 900–1300 Ma, 1370 Ma and 1600–1800 Ma corresponding to derivation from Grenville, Granite-Rhyolite and Yavapai-Mazatzal basement provinces, respectively. A dominant detrital zircon peak at 1370 Ma suggests that Mesoproterozoic granites in the Amarillo Uplift were exposed by Middle Pennsylvanian time, and detritus eroded from the Amarillo Uplift dominated the lowstand sediment budget of the Texas Panhandle during this time; small volumes of sediment were likely sourced from the Ancestral Front Range. In conclusion, this study presents the first detrital geochronology data from the subsurface Anadarko Basin and the first detrital muscovite data from late Paleozoic southwestern Laurentia. The results presented here highlight the interpretive power of combined detrital zircon and muscovite datasets.

58 GEOSCIENCES↗
DOE OSTI2021

Effects of Casting Parameters and Impurity Concentrations on As-Cast U–10Mo

This work investigates the effects of casting parameter changes on as-cast uranium-10 wt% molybdenum alloys on a 1-2kg scale. A commercial tilt-pour vacuum induction melting system was utilized to study the effects of casting atmosphere, total heating time, hold time at maximum temperature, mold temperature, and crucible type on the as-cast microstructure of U-10Mo. Ten thin plates (5.08 mm thick) and four thick plates (25.4 mm and 63.5 mm thick) were cast and analyzed for carbon, oxygen, hydrogen, and nitrogen impurities. Additionally, molybdenum content and primary dendrite length (PDL) of the microstructure was quantified. A statistical evaluation was performed to identify key carbon and oxygen relationships with operating parameters, impurities, and primary dendrite length. Additional factors investigated include: crucible material, time at maximum temperature, total heating time, and pour temperature. Zirconia crucibles reduced carbon content on average by 35%. Additionally, there was a significant statistical association between carbon and oxygen content, between oxygen content and maximum temperature hold time, between mold temperature and PDL, and between PDL, maximum temperature hold time and mold temperature.

Huber, Zachary F.↗
DOE OSTI2020

Time-resolved formation of uranium and silicon oxides subsequent to the laser ablation of U 3 Si 2

The early-time kinetic behavior of species in a plume produced from laser ablation of U 3 Si 2 in an environment containing 2% O 2 is characterized using time-resolved absorption spectroscopy. The UO band around 593.55 nm and the SiO band around 230 nm is observed as well as various atomic and ionic uranium transitions. Temperatures and concentrations of these species are tracked and reported as well.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Synthesis of uranium mixed anion compounds synthesized using the Boron-Chalcogen Mixture method: Ba 6 Co 6 U 0·9 1S 13·5 O 0.5 and Ba 5·47 K 0·53 Zn 6 US 13·5 O 0.5

Mixed anion compounds have exhibited interesting structures and properties that differ from compounds only incorporating a single anion in their composition. Unfortunately, difficulties in the synthetic methods used to obtain these materials has slowed the evolution of this field, prompting investigations into alternate synthetic pathways to these materials. Our recently establish Boron-Chalcogen Mixture (BCM) method, which was originally developed for the synthesis of pure actinide chalcogenides from oxides, has been adapted to achieve the partial oxide to sulfide conversion of Ba 2 MUO 6 (M = Co, Zn) which resulted in two new uranium (IV/V) oxysulfide compounds, Ba 6 Co 6 U 0·91 S 13·5 O 0.5 and Ba 5·47 K 0·53 Zn 6 US 13·5 O 0.5 These compounds crystallize in the tetragonal crystal system adopting the space group I4/mcm. Finally, their syntheses, crystal structures, and trends observed in the pursuit of these new mixed anion compounds are reported.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Activation of CO 2 by Actinide Cations (Th + , U + , Pu + , and Am + ) as Studied by Guided Ion Beam and Triple Quadrupole Mass Spectrometry

Reactions of CO 2 with Th+ have been studied using guided ion beam tandem mass spectrometry (GIBMS) and with An + (An + = Th + , U + , Pu + , and Am + ) using triple quadrupole inductively coupled plasma mass spectrometry (QQQ-ICP-MS). Additionally, the reactions ThO + + CO and ThO + + CO 2 were examined using GIBMS. Modeling the kinetic energy dependent GIBMS data allowed determination of bond dissociation energies (BDEs) for D o (Th + -O) and D o (OTh + -O) that are in reasonable agreement with previous GIBMS measurements. The QQQ-ICP-MS reactions were studied at higher pressures where multiple collisions between An + and the neutral CO 2 occur. As a consequence, both AnO + and AnO 2 + products were observed for all An + except Am + , where only AmO + was observed. Here, the relative abundances of the observed monoxides compared to the dioxides are consistent with previous reports of the AnO n + (n = 1, 2) BDEs. Comparison of the periodic trends of the group 4 transition metal, lanthanide (Ln), and actinide atomic cations in reactions with CO 2 (a formally spin-forbidden reaction for most M + ground states), and O 2 (a spin unrestricted reaction) indicate that spin conservation plays a minor role, if any, for the heavier An + metals. Further correlation of Ln + and An + + CO 2 reaction efficiencies with the promotion energy (E p ) to the first electronic state with two valence d-electrons (E p (5d 2 ) for Ln + and E p (6d 2 ) for An + ) indicates that the primary limitation in the activation of CO 2 is the energetic cost to promote from the electronic ground state of the atomic metal ion to a reactive state.

bond activation↗
DOE OSTI2026

Reactions of U(DMSO) 8 (ClO 4 ) 4 with Terpyridine Yield Dimeric Hydrolysis Products and Induce C–C Coupling

Reactions have been carried out using UIV(DMSO) 8 (ClO 4 ) 4 with 2,2′:6′,2″-terpyridine (terpy) under nonaqueous conditions. At room temperature in acetonitrile, the combination of the U(IV) starting material with terpy resulted in a mixture containing [UO 2 (DMSO) 2 terpy][ClO 4 ] 2 ·MeCN, while increasing the water content led to the hydrolysis products [(UO 2 (DMSO)terpy) 2 (μ 2 –O)][ClO 4 ] 2 and [(UO 2 terpy) 2 (μ 2 –OH) 2 ][ClO 4 ] 2 ·MeCN·H 2 O. Performing the reaction at slightly elevated temperature with no added water led to the formation of [UO 2 sexipyridine][ClO 4 ] 2 ·MeCN. This new uranyl complex contains the hexadentate ligand 2,2′:6′,2″:6″,2″:6‴,2⁗:6⁗,2⁗′-sexipyridine, which formed in situ from the tetravalent uranium starting material, where photoexcited uranyl or in situ generated peroxide could have induced C–C coupling. Analysis of bonding in the dimeric uranyl species via quantum chemical methods revealed a small increase in covalency of the bridging oxo unit and a slightly greater stability compared to the bridging hydroxo compound, which causes a significant shift in the uranyl symmetric stretch in the Raman spectrum. Structural, spectroscopic, and computational comparisons are made across the series of compounds, providing insight into the bonding and reactivity of uranium in nonaqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Calculated Ionization Potentials of MO 3 and MO 2 for M = U, Mo, W, and Nd

Here, ionization potentials (IPs) for MO 3 and MO 2 for M = U, Mo, W, and Nd have been predicted using the Feller–Peterson–Dixon (FPD) approach at the coupled cluster CCSD(T)/complete basis set level including additional corrections. The additional corrections are mostly small, with spin-orbit effects contributing less than 0.05 eV, except for NdO 2 where the correction lowers the IP by 0.26 eV. The IPs for UO 3 and UO 2 are calculated to be 9.59 and 6.09 eV, respectively. The calculated IPs for MoO 3 and WO 3 are very similar, 11.13 and 11.11 eV, respectively, and MoO 2 and WO 2 are 8.51 and 8.79 eV, respectively. MoO 2 has a triplet ground state, whereas WO 2 has a singlet ground state. The calculated IP for NdO 2 is 7.90 eV. NdO 3 does not achieve a high +VI formal oxidation state on the lanthanide and has an IP of 7.80 eV. These calculated IPs are expected to have error bars of ±0.04 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Experimental and Computational Description of the Interaction of H and H – with U

In this work, the results of ab initio correlated molecular orbital theory electronic structure calculations for low-lying electronic states are presented for UH and UH – and compared to photoelectron spectroscopy measurements. The calculations were performed at the CCSD(T)/CBS and multireference CASPT2 including spin–orbit effects by the state interacting approach levels. The ground states of UH and UH – are predicted to be 4 Ι 9/2 and 5 Λ 6 , respectively. The spectroscopic parameters T e , r e , ω e , ω e x e , and Be were obtained, and potential energy curves were calculated for the low energy Ω states of UH. The calculated adiabatic electron affinity is 0.468 eV in excellent agreement with an experimental value of 0.462 ± 0.013 eV. The lowest vertical detachment energy was predicted to be 0.506 eV for the ground state, and the adiabatic ionization energy (IE) is predicted to be 6.116 eV. The bond dissociation energy (BDE) and heat of formation values of UH were obtained using the IE calculated at the Feller–Peterson–Dixon level. For UH, UH – , and UH + , the BDEs were predicted to be 225.5, 197.9, and 235.5 kJ/mol, respectively. The BDE for UH is predicted to be ~20% lower in energy than that for ThH. The analysis of the natural bond orbitals shows a significant U + H – ionic component in the bond of UH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Identification of the Elusive Methyl-Loss Channel in the Crossed Molecular Beam Study of Gas-Phase Reaction of Dicarbon Molecules (C 2 ; X 1 Σ g + /a 3 Π u ) with 2-Methyl-1,3-butadiene (C 5 H 8 ; X 1 A')

The crossed molecular beams technique was utilized to explore the reaction of dicarbon C 2 (X 1 Σ g + /a 3 Π u ) with 2-methyl-1,3-butadiene (isoprene, CH 2 C(CH 3 )CHCH 2 ; X 1 A') at a collision energy of 28 ± 1 kJ mol⁻¹ using a supersonic dicarbon beam generated via photolysis (248 nm) of helium-seeded tetrachloroethylene (C 2 Cl 4 ). Here, experimental data combined with previous ab initio calculations provide evidence of the detection of the hitherto elusive methyl elimination channels leading to acyclic resonantly stabilized hexatetraenyl radicals: 1,2,4,5-hexatetraen-3-yl (CH 2 CC•CHCCH 2 ) and/or 1,3,4,5-hexatetraen-3-yl (CH 2 CHC•CCCH 2 ). These pathways are exclusive to the singlet potential energy surface, with the reaction initiated by the barrierless addition of dicarbon to one of the carbon-carbon double bonds in the diene. In combustion systems, both hexatetraenyl radicals can isomerize to the phenyl radical (C 6 H 5 ) through a hydrogen atom assisted isomerization – the crucial reaction intermediate and molecular mass growth species step toward the formation of polycyclic aromatic hydrocarbons (PAHs) and soot.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Photodissociation and Infrared Spectroscopy of U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n Cation-Molecular Complexes

Laser vaporization of uranium in a pulsed supersonic expansion of carbon dioxide is used to produce complexes of the form U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n . These ions are selected in a reflectron time-offlight mass spectrometer and studied with visible laser photodissociation and tunable infrared laser photodissociation spectroscopy in the region of the CO 2 antisymmetric stretch. The dissociation patterns and spectroscopy of these ions indicate that CO 2 ligands are intact molecules. Although reaction products that form oxide-carbonyl or oxalate species are predicted to be stable, there is no direct evidence in the frequency range studied for the formation of these species. There is no clear indication for the coordination numbers for singly charged uranium and its oxide complexes with CO 2 . However, there is strong support in the vibrational patterns for an eight-coordinate complex of the doubly charged UO 2+ species, i.e., UO 2+ (CO 2 ) 8 .

Cluster chemistry↗
DOE OSTI2020

Crystallographic structure and crystal field parameters in the [An IV (DPA) 3 ] 2- series, An = Th, U, Np, Pu

The [An IV (DPA) 3 ] 2- series with An = Th, U, Np, Pu has been synthesized and characterized using SC-XRD and vibrational spectroscopy. First principles calculations were performed, the total electron density is analyzed using the Quantum Theory of Atoms in Molecules. Crystal field parameters and strength parameters are deduced following a previous work on the Ln III analog series e.g. [J. Jung et al., Chem. – Eur. J., 2019, 25, 15112]. The trends in the parameters along the series are compared to the Ln III complexes. They evidence larger covalent interactions and larger J mixing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantum chemical topology and natural bond orbital analysis of M–O covalency in M(OC 6 H 5 ) 4 (M = Ti, Zr, Hf, Ce, Th, Pa, U, Np)

Covalency is complex yet central to our understanding of chemical bonding, particularly in the actinide series. In this work, we assess covalency in a series of isostructural d and f transition element compounds M(OC 6 H 5 ) 4 (M = Ti, Zr, Hf, Ce, Th, Pa, U, Np) using scalar relativistic hybrid density functional theory in conjunction with the Natural Bond Orbital (NBO), quantum theory of atoms in molecules (QTAIM) and interacting quantum atoms (IQA) approaches. The IQA exchange–correlation covalency metric is evaluated for the first time for actinides other than uranium, in order to assess its applicability in the 5f series. It is found to have excellent correlation with NBO and QTAIM covalency metrics, making it a promising addition to the computational toolkit for analysing metal–ligand bonding. Our range of metrics agree that the actinide-oxygen bonds are the most covalent of the elements studied, with those of the heavier group 4 elements the least. Within the early actinide series, Th stands apart from the other three elements considered, being consistently the least covalent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗