On the theory of smectic textures
The strains in smectics are considered beyond the small-angle approximation. The energies of confocal and conical textures are determined.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The strains in smectics are considered beyond the small-angle approximation. The energies of confocal and conical textures are determined.
The phase formation of cobalt germanides on Ge(100) and Ge(111) substrates was investigated using in situ X-ray diffraction, starting from room-temperature sputter-deposited Co films. The formation temperature of the CoGe{sub 2} phase was dependent on the substrate orientation. X-ray pole figures and electron backscatter diffraction measurements were used to identify the texture and microstructure of the CoGe{sub 2} and the preceding Co{sub 5}Ge{sub 7} films. A significant difference in preferential orientation was found in the Co{sub 5}Ge{sub 7} films, depending on the substrate orientation. This influences the formation temperature of the CoGe{sub 2} and results in the coexistence of Co{sub 5}Ge{sub 7} and CoGe{sub 2} on Ge(111) in a large temperature window.
Understanding soil texture and organic matter content supports our understanding of hydrology and ecology of Arctic sites. Soil organic matter content and composition of sand, silt, and clay were measured from soils collected at the Teller 27 field site on the Seward Peninsula and at the Barrow Environmental Observatory (BEO) near Utqiaġvik, Alaska, on August 2nd and 6th 2024, respectively. Soil samples were collected from the active layer to varied depths. Precise location data were collected at each observation point using Avenza Maps on a mobile device. Sand, silt, clay, and organic matter percentages were measured at Desert Research Institute Soil Characterization and Quaternary Pedology Laboratory in Reno, NV. This dataset contains a *.csv file of soil properties, a *.kml file of measurement locations, a *.pdf user guide, a *.csv data dictionary, and a *.csv file level metadata.
The performance of hohlraums for use in NIF (National Ignition Facility) is explored using Cassio: a LANL produced radiation hydrodynamics code that implements implicit Monte Carlo radiation transport. We examine the effect on blowoff of adding texture to the inside of the hohlraum wall. These new designs are compared in simulation against current designs and the data are analyzed for the possible use of such hohlraums in future high energy density physics experiments.
These slides represent the author's research activity at Los Alamos National Laboratory (LANL), which is about texture and phase analysis of deformed SUS304 by using HIPPO. The following topics are covered: diffraction histogram at each sample position, diffraction histogram (all bank data averaged), possiblity of ε-phase, MAUD analysis with including ε-phase.
This CRADA is aimed at developing silicon solar cell technologies that can yield higher efficiency solar cells. Specifically, this CRADA cover three technologies: (i) developing a high temperature process for dissolution of oxygen precipitates, (ii) uniform texturization of diamond wire sawn wafers, and (iii) evaluation of techniques to bond techniques thin wafers and thin films.
We propose an algorithm for texture segmentation based on a divide-and-conquer strategy of statistical modeling.
The problem addressed in this paper is that clustering image pixels into regions of homogenous geological texture.
Neutron diffraction has been used for engineering applications for nearly three decades. The basis of the technique is powder diffraction following Bragg's Law. From the measured diffraction patterns information about internal, or residual, strain can be deduced from the peak positions, texture information can be extracted from the peak intensities, and finally the peak widths can provide information about the microstructure, e.g. dislocation densities and grain sizes. The strains are measured directly from changes in lattice parameters, however, in many cases it is non-trivial to determine macroscopic values of stress or strain from the measured data. The effects of intergranular strains must be considered, and combining the neutron diffraction measurements with polycrystal deformation modeling has proven invaluable in determining the overall stress and strain values of interest in designing and dimensioning engineering components. Furthelmore, the combined use of measurements and modeling has provided a tool for elucidating basic material properties, such as critical resolved shear stresses for the active deformation modes and their evolution as a function of applied deformation.
Motivation of this project is: (1) Build a furnace as a cross section of a gun barrel capable of temperatures up to 600 Celsius; (2) To examine the influence of temperature, texture, and extrusion velocity in Tantalum; (3) Constrain parameters to improve and assist in constitutive model development using high speed imaging & PDV (in-situ); (4) Understanding microstructural development in materials using the dynamic extrusion technique; and (5) Use as a validation test for developing fracture models important to industry, the DoD, and the DOE.
The objective of this work is to develop a time- and cost-efficient, accurate technique to determine texture properties of TerraPower zirconium-bearing and other alloyed fuel materials. It is also the desire of the customer to obtain quantitative or semi-quantitative results from these measurements.
This invention relates to magnetic tunnel junctions and methods for making the magnetic tunnel junctions. The magnetic tunnel junctions include a tunnel barrier oxide layer sandwiched between two ferromagnetic layers both of which are epitaxial or textured with respect to the underlying substrate upon which the magnetic tunnel junctions are grown. The magnetic tunnel junctions provide improved magnetic properties, sharper interfaces and few defects.
A good combination of room-temperature and elevated temperature strength and ductility, good salt-spray corrosion resistance and exceUent diecastability are frequently among the main considerations in development of a new alloy. Unfortunately, there has been much lesser effort in development of wrought-stock alloys for high temperature applications. Extrudability and high temperature performance of wrought material becomes an important factor in an effort to develop new wrought alloys and processing technologies. This paper shows some results received in creep testing and studies of in-creep texture evolution for several wrought magnesium alloys developed for use in elevated-temperature applications. These studies were performed using E3 neutron spectrometer of the Canadian Neutron Beam Centre in Chalk River, ON, and HIPPO time-of-flight (TOF) spectrometer at Los Alamos Neutron Science Center, NM.
The evolution of porous media due to mineral dissolution and precipitation can change the bulk properties of subsurface materials. The pore-scale structure of the media, including its physical and mineralogical heterogeneity, exerts controls on porous media evolution via transport limitations to reactive surfaces and mineral accessibility. Here in this paper we explore how these controls affect the evolution of the texture in porous media at the pore scale. For this purpose, a pore-scale flow and reactive transport model is developed that explicitly tracks mineral surfaces as they evolve using a direct numerical simulation approach. Simulations of dissolution in single-mineral domains provide insights into the transport controls at the pore scale, while the simulation of a fracture surface composed of bands of faster-dissolving calcite and slower-dissolving dolomite provides insights into the mineralogical controls on evolution. Transport-limited conditions at the grain-pack scale may result in unstable evolution, a situation in which dissolution is focused in a fast-flowing, fast-dissolving path. Due to increasing velocities, the evolution in these regions is like that observed under conditions closer to strict surface control at the pore scale. That is, grains evolve to have oblong shapes with their long dimensions aligning with the local flow directions. Another example of an evolving reactive transport regime that affects local rates is seen in the evolution of the fracture surface. As calcite dissolves, the diffusive length between the fracture flow path and the receding calcite surfaces increases. Thus, the calcite dissolution reaction becomes increasingly limited by diffusion.
Polar topological textures are recently discovered in ultra–thin ferroelectrics, including stripe, labyrinth, or bubble states. Enabling to shape on–demand, these topologies herein can provide an original platform for potential applications. Here, using first–principle–based calculations, it is shown that THz electric field pulses are an efficient means for generating a plethora of topological states in ultrathin films made by a prototypical ferroelectric system, depending on the characteristics of these pulses and films. Consequently, these ultrafast electrical pulses in ultra–thin ferroelectrics offer key ingredients for mimicking neuronal and synaptic behaviors, including all–optical devices, and open a new avenue for topological objects to neuromorphic systems.
The use of grazing-incidence scattering methods for the characterization of 2D patterned organic thin films is limited due to the elongated 1D footprint of the X-ray beam on the sample. However, this characteristic feature can be turned into an advantage, when combined with tomographic reconstruction. In this pilot study we show, how the use of a chosen texture reflection and a diffuse reflectivity signal can each provide 2D images of the deposits, simultaneously revealing the organic film's crystal orientation and the location of the metal electrodes in a field-effect transistor structure from a single sequence of diffraction images.
Purpose: To evaluate the feasibility of using computed tomography texture analysis (CTTA) parameters for predicting malignant risk grade and mitosis index of gastrointestinal stromal tumors (GISTs), compared with visual inspection. Method and materials: CTTA was performed on portal phase CT images of 145 surgically confirmed GISTs (mean size: 42.9 ± 37.5 mm), using TexRAD software. Mean, standard deviation, entropy, mean of positive pixels (MPP), skewness, and kurtosis of CTTA parameters, on spatial scaling factor (SSF), 2–6 were compared by risk grade, mitosis rate, and the presence or absence of necrosis on visual inspection. CTTA parameters were correlated with risk grade. Diagnostic performance was evaluated with receiver operating characteristic curve analysis. Enhancement pattern, necrosis, heterogeneity, calcification, growth pattern, and mucosal ulceration were subjectively evaluated by two observers. Results: Three to four parameters at different scales were significantly different according to the risk grade, mitosis rate, and the presence or absence of necrosis (p < 0.041). MPP at fine or medium scale (r = − 0.547 to − 393) and kurtosis at coarse scale (r = 0.424–0.454) correlated significantly with risk grade (p < 0.001). HG-GIST was best differentiated from LG-GIST by MPP at SSF 2 (AUC, 0.782), and kurtosis at SSF 4 (AUC, 0.779) (all p < 0.001). CT features predictive of HG-GIST were density lower than or equal to that of the erector spinae muscles on enhanced images (OR 2.1; p = 0.037; AUC, 0.59), necrosis (OR, 6.1; p < 0.001; AUC, 0.70), heterogeneity (OR, 4.3; p < 0.001; AUC, 0.67), and mucosal ulceration (OR, 3.3; p = 0.002; AUC, 0.62). Conclusion: Using TexRAD, MPP and kurtosis are feasible in predicting risk grade and mitosis index of GISTs. CTTA demonstrated meaningful accuracy in preoperative risk stratification of GISTs.
Purpose: To determine if texture analysis can differentiate placenta accreta spectrum (PAS) from normal placenta on MRI. Methods: We performed retrospective image analysis of 80 patients, comprised of 46 patients with PAS and 34 patients without PAS. Histopathology was used as the reference standard. Sagittal single shot fast spin echo T2-weighted MRI sequences acquired from a single institution were analyzed. Placental heterogeneity was quantified using in-house software on a Matlab platform, including the standard deviation of pixel intensity, coefficient of variation, gray-level co-occurrence matrices (GLCM), histogram-oriented gradients (HOG), and fractal analysis with box sizes from 2 to 512. Two-tailed unpaired Student’s t test was used with statistical significance of p < 0.05. Results: PAS was associated with higher values for standard deviation of pixel intensity and fractal analysis at every box size. Fractal analysis at box sizes 256 (p = 0.011) and 32 (p = 0.021), and standard deviation of pixel intensity (p = 0.023) were the most statistically significant. Fractal values at box size 256 for PAS was 0.13 versus 0.090 for patients without PAS, while standard deviation of pixel intensity was 3.7 for PAS versus 2.5 for patients without PAS. No statistically significant association between PAS and GLCM, coefficient of variation, and HOG was found. Conclusion: Statistically significant differences were found between normal and abnormal groups using standard deviation of pixel intensity and fractal analysis.