Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TUNING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Work Function Tuning of a Weak Adhesion Homojunction for Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have demonstrated a comparable efficiency to Si-based cells. However, the buried interface with weak adhesion remains a critical issue since the ion migration enhanced by the built-in electric field at this interface might lead to instability. We report here that adjusting the energy-level alignment at the weak adhesion homojunction interface can mitigate ion migration and thereby enhance the stability and photovoltaic performance of PSCs. Functional molecules with self-assembled monolayer characteristics were introduced to the surface of the SnO2 layer using silane derivatives, which tuned the work function of the homojunction depending on the functional groups in the molecules and thereby significantly reduced the built-in electric field. The PSC exhibited a power conversion efficiency (PCE) of 25.3%. The maximum power point (MPP) tracking under continuous illumination confirmed that the device retained more than 97% of its initial PCE, even after 1,000 h.

homojunction↗

Tuning the activity of Cu-containing rare earth oxide catalysts for CO oxidation reaction: Cooling while heating paradigm in microwave-assisted synthesis

Highlights: • Organic chemistry synthesis concepts have been smartly tailored to catalysts’ development. • Enhanced microwave synthesis of (Ce-La-10Cu)O{sub 2} led to an one phase system. • CO{sub 2}-philicity, and oxygen vacancies can be tuned by synthesis. • Coupling microwave with air cooling led to T{sub 50} decrease by 32% in the CO oxidation reaction. - Abstract: (Ce-La-xCu)O{sub 2} catalysts with low (3 at.%) and high (10 at.%) Cu content were prepared by conventional microwave (MW) and enhanced microwave methods where air cooling (AC), while heating, was applied. The catalysts were tested for the CO oxidation reaction in the 25–500 °C range using 4%CO/20%O{sub 2}/He feed gas. Varying spectroscopic, microscopic and catalytic studies were used to probe the effect of synthesis on the nanostructure and the CO oxidation performance. It was found that the synthesis method adopted impacts on the extent of the Cu doping into the (Ce-La)O{sub 2} fluorite lattice, hence leading to one and two phases system in the case of catalyst prepared through enhanced (AC) and conventional (MW) microwave methods, respectively. Furthermore, only Ce{sup 4+} species were found on the surface of the (Ce-La-10Cu)O{sub 2} catalysts synthesized using MW and AC (XPS studies), whereas oxygen vacant sites which are associated with Ce{sup 3+} ions were indicated in the sub-surface/bulk (Raman studies). Ultimately, the catalysts with the low and high Cu loading, prepared under the AC-promoted microwave method, presented a superior performance against CO oxidation, exhibiting an overall improvement of the catalytic activity by 16% and 32%, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Performance evaluation of an energy tuning assembly for neutron spectral shaping

An energy tuning assembly (ETA) was designed here to be fielded at the National Ignition Facility (NIF) to modify the characteristic D-T fusion spectrum to include a prompt fission neutron spectral component. The ETA was characterized at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory to measure the shaped spectrum from an incident deuteron breakup neutron source, test the proposed neutron spectroscopy techniques used to inform the flux measurements at NIF, and validate the ability to predict ETA performance using a Monte Carlo Neutral Particle (MCNP) simulation. Activation foils (i.e., Ni, In, Au, Al) were exposed to a collimated 33-MeV deuteron-breakup beam originating from a tantalum breakup target. The source spectrum absent the ETA was characterized using a set of activation foils and the STAYSL unfolding code. Finally, the ETA-modified spectrum was obtained using activation foil unfolding with a χ 2 ν = 0 . 92 . The ETA-modified unfolded spectrum agreed with the MCNP-simulated prediction in the energy range of 0.1–14 MeV, but exhibited disagreements in the 10 eV–100 keV region. This work demonstrates shaping of the NIF neutron spectrum via the ETA to be a viable path forward for tailored neutron beams at NIF.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Huygens’ Metasurfaces Enabled by Magnetic Dipole Resonance Tuning in Split Dielectric Nanoresonators

Dielectric metasurfaces that exploit the different Mie resonances of nanoscale dielectric resonators are a powerful platform for manipulating electromagnetic fields and can provide novel optical behavior. Here in this work, we experimentally demonstrate independent tuning of the magnetic dipole resonances relative to the electric dipole resonances of split dielectric resonators (SDRs). By increasing the split dimension, we observe a blue shift of the magnetic dipole resonance toward the electric dipole resonance. Therefore, SDRs provide the ability to directly control the interaction between the two dipole resonances within the same resonator. For example, we achieve the first Kerker condition by spectrally overlapping the electric and magnetic dipole resonances and observe significantly suppressed backward scattering. Moreover, we show that a single SDR can be used as an optical nanoantenna that provides strong unidirectional emission from an electric dipole source.

36 MATERIALS SCIENCE↗

Raising the Asymmetric Catalytic Efficiency of Chiral Covalent Organic Frameworks by Tuning the Pore Environment

Chiral covalent organic frameworks (COFs) hold considerable promise in the realm of heterogeneous asymmetric catalysis. However, fine-tuning the pore environment to enhance both the activity and stereoselectivity of chiral COFs in such applications remains a formidable challenge. In this study, we have successfully designed and synthesized a series of clover-shaped, hydrazone-linked chiral COFs, each with a varying number of accessible chiral pyrrolidine catalytic sites. Remarkably, the catalytic efficiencies of these COFs in the asymmetric aldol reaction between cyclohexanone and 4-nitrobenzaldehyde correlate well with the number of accessible pyrrolidine sites within the frameworks. Further, the COF featuring nearly one pyrrolidine moiety at each nodal point demonstrated excellent reaction yields and enantiomeric excess (ee) values, reaching up to 97 and 83%, respectively. The findings not only underscore the profound impact of a deliberately controlled chiral pore environment on the catalytic efficiencies of COFs but also offer a new perspective for the design and synthesis of advanced chiral COFs for efficient asymmetric catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Active Palladium Structures on Ceria Obtained by Tuning Pd–Pd Distance for Efficient Methane Combustion

Efficiently removing/converting methane via methane combustion imposes challenges on catalyst design: how to design local structures of a catalytic site so that it has both high intrinsic activity and atomic efficiency? By manipulating the atomic distance of isolated Pd atoms, herein we show that the intrinsic activity of Pd catalysts can be significantly improved for methane combustion via a stable Pd 2 structure on a ceria nanorod support. Guided by theory and confirmed by experiment, we find that the turnover frequency (TOF) of the Pd 2 structure with the Pd–Pd distance of 2.99 Å is higher than that of the Pd 2 structure with the Pd–Pd distance of 2.75 Å; at least 26 times that of ceria supported Pd single atoms and 4 times that of ceria supported PdO nanoparticles. The high intrinsic activity of the 2.99 Å Pd–Pd structure is attributed to the conductive local redox environment from the two O atoms bridging the two Pd 2+ ions, which facilitates both methane adsorption and activation as well as the production of water and carbon dioxide during the methane oxidation process. In conclusion, this work highlights the sensitivity of catalytic behavior on the local structure of active sites and the fine-tuning of the metal–metal distance enabled by a support local environment for guiding the design of efficient catalysts for reactions that highly rely on Pt-group metals.

36 MATERIALS SCIENCE↗

Flexible Quasi-Two-Dimensional CoFe 2 O 4 Epitaxial Thin Films for Continuous Strain Tuning of Magnetic Properties

Epitaxial thin films of CoFe 2 O 4 (CFO) have successfully been transferred from a SrTiO 3 substrate onto a flexible polyimide substrate. By bending the flexible polyimide, different levels of uniaxial strain are continuously introduced into the CFO epitaxial thin films. Unlike traditional epitaxial strain induced by substrates, the strain from bending will not suffer from critical thickness limitation, crystalline quality variation, and substrate clamping, and more importantly, it provides a more intrinsic and reliable way to study strain-controlled behaviors in functional oxide systems. It is found that both the saturation magnetization and coercivity of the transferred films can be changed over the bending status and show a high accord with the movement of the curvature bending radius of the polyimide substrate. Lastly, this reveals that the mechanical strain plays a critical role in tuning the magnetic properties of CFO thin films parallel and perpendicular to the film plane direction.

36 MATERIALS SCIENCE↗

Molecular Tuning of Ether Cosolvent Chemistry for High-Voltage Sodium-Ion Batteries

Ethers as electrolyte cosolvents in sodium-ion batteries (SIBs) provide favorable Na + solvation and interfacial properties, but their low oxidative stability limits their use in high-voltage SIBs. Herein, we address this limitation via molecular tuning of ether cosolvents for high-voltage (4.2 V) hard carbon || NaNi 0.33 Fe 0.33 Mn 0.33 O 2 full cells. Tetrahydropyran (THP) is functionalized with a nitrile group to form tetrahydropyran-4-carbonitrile (THPCN). To delineate the effect of nitrile functionalization and benchmark ether against a conventional carbonate, THP, THPCN, and diethyl carbonate (DEC) are evaluated as cosolvents with ethylene carbonate. Nitrile functionalization lowers the HOMO energy of the ether, extends the electrolyte stability window, and alters Na⁺ solvation. Spectroscopic techniques and molecular dynamics simulations reveal that THPCN exhibits predominantly aggregate-dominated solvation (95.1 %) with weakened Na + -solvent interactions, producing the most anion-rich environment relative to DEC and THP cosolvents. THPCN-modified solvation promotes the formation of highly conductive, fluorine-enriched interphases that suppress parasitic reactions. Pouch full cells with THPCN sustained ~ 600 cycles at 4.2 V, outperforming THP and DEC. Operando gas analysis reveals that THPCN reduces CO 2 generation by 45% and H 2 generation by 30% relative to THP. Furthermore, the findings demonstrate nitrile functionalization as a molecular design strategy to stabilize ethers and enable high-voltage SIBs.

25 ENERGY STORAGE↗

Tuning Band Gap Energies in Pb3(C6X6) Extended Solid-State Structures

A detailed plane-wave density functional theory investigation of the solid-state properties of the extended organometallic system Pb{sub 3}C{sub 6}X{sub 6} for X = O, S, Se, and Te has been performed. Initial geometry parameters for the Pb-X and C-X bond distances were obtained from optimized calculations on molecular fragment models. The Pb{sub 3}C{sub 6}X{sub 6} extended solid molecular structures were constructed in the space group P6/mmm on the basis of the known structure for X = S. Ground-state geometries, band gap energies, densities of states, and charge densities were calculated with the PBE-generalized gradient exchange-correlation functional and the HSE06 hybrid exchange-correlation functional. The PBE band gap energies were found to be lower than the HSE06 values by >0.7 eV. The band energies at points of high symmetry along the first Brillouin zone in the crystal were larger than the overall band gap of the system. Pb{sub 3}C{sub 6}O{sub 6} was predicted to be a direct semiconductor ({Lambda} point) with a PBE band gap of 0.28 eV and an HSE06 band gap of 1.06 eV. Pb{sub 3}C{sub 6}S{sub 6} and Pb{sub 3}C{sub 6}Se{sub 6} were predicted to have indirect band gaps. The PBE band gap for Pb{sub 3}C{sub 6}S{sub 6} was 0.98 eV, and the HSE06 band gap was 1.91 eV. The HSE06 value is in good agreement with the experimentally observed band gap of 1.7 eV. Pb{sub 3}C{sub 6}Se{sub 6} has a PBE band gap of 0.56 eV and a HSE06 band gap of 1.41 eV. Pb{sub 3}C{sub 6}Te{sub 6} was predicted to be metallic with both of the PBE and HSE06 functionals. A detailed analysis of the PBE band structure and partial density of states at two points before and after the metallic behavior reveals a change in orbital character indicative of band crossing in Pb{sub 3}C{sub 6}Te{sub 6}. These results show that the band gap energies can be fine-tuned by changing the substituent X atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diameter Tuning of Single Walled Carbon Nanotubes with Reaction Temperature Using a Co Monometallic Catalyst

Metal incorporated MCM-41 has proven to be a valuable template for the growth of narrow distributions of single-walled carbon nanotubes (SWNT), producing samples with a wide range of different mean diameters. The ability to obtain narrow diameter distributions at different mean diameters is important for applications that require particular (n,m) nanotubes. Another advantage of this system is the ease of cleaning and low metal content as compared to bimetallic systems. In this Article, we show that Co-MCM-41 allows diameter tuning of SWNT produced over a broad diameter range (from 0.6-0.8 to 1.8-2.0 nm) by changing reaction temperature. The lower temperature reaction provides a robust means to obtain very small diameter SWNT. X-ray absorption experiments show that the change in SWNT diameter correlates with the change in metal particle size.

36 MATERIALS SCIENCE↗

Linking Carbon and Boron-Nitride Nanotubes: Heterojunction Energetics and Band Gap Tuning

We investigate the energetics of forming heteronanotubes, which are combinations of pure carbon nanotube (CNT) segments and boron-nitride nanotube (BNNT)segments. Our density functional theory calculations predict that the adverse impacts of heterojunctions on the nanotube stability can be minimized if the CNTand/or the BNNT building block segments are sufficiently large along the axial direction (corresponding to circular junctions). As such, carbon-boron-nitride heteronanotubes can be thermodynamically competitive in stability, as compared to pure CNTs and BNNTs of similar geometry, and this is in good agreement with previous experimental observations. In addition, we find that the highest occupied crystal orbital/lowest unoccupied crystal orbital (HOCO-LUCO) gap of carbon-boron-nitride heteronanotubes can be significantly tuned by modifying the CNT and BNNT combinations, the tube chirality, or the junction geometry (i.e., circular or linear).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tuning the Optical Properties of Mesoporous TiO2 Films by Nanoscale Engineering

Introducing mesoscale pores into spincoated titanium dioxide films, prepared by spincoating different sol-gel precursor solutions on silicon substrates and subsequent annealing at 350 C, 400 C or 450 C, respectively, affects several optical properties of the material. The change in refractive index observed for different mesoporous anatase films directly correlates with changes in pore size, but is also in a more complex manner influenced by the film thickness and the density of pores within the films. Additionally, the band gap of the films is blueshifted by the stress the introduction of pores exerts on the inorganic matrix. The differently sized pores were templated by Pluronic{reg_sign} block copolymers in the solgel solutions and tuned by employing different annealing temperatures for the film preparation. This study focused on elucidating the effect different templating materials (F127 and P123) have on the pore size of the final mesoporous titania film, and on understanding the relation of varying polymer concentration (taking P123 as an example) in the sol-gel solution to the pore concentration and size in the resultant titania film. Titania thin film samples or corresponding titanium dioxide powders were characterized by X-ray diffraction, nitrogen adsorption, ellipsometery, UV/Vis spectrometry and other techniques to understand the interplay between mesoporosity and optical properties.

36 MATERIALS SCIENCE↗

Tuning Structural and Mechanical Properties of Two-Dimensional Molecular Crystals: The Roles of Carbon Side Chains

A key requirement for the future applicability of molecular electronics devices is a resilience of their properties to mechanical deformation. At present, however, there is no fundamental understanding of the origins of mechanical properties of molecular films. Here we use quinacridone, which possesses flexible carbon side chains, as a model molecular system to address this issue. Eight molecular configurations with different molecular coverage are identified by scanning tunneling microscopy. Theoretical calculations reveal quantitatively the roles of different molecule-molecule and molecule-substrate interactions and predict the observed sequence of configurations. Remarkably, we find that a single Young's modulus applies for all configurations, the magnitude of which is controlled by side chain length, suggesting a versatile avenue for tuning not only the physical and chemical properties of molecular films but also their elastic properties.

36 MATERIALS SCIENCE↗

Tuning the Electronic Coupling and Magnetic Moment of a Metal Nanoparticle Dimer in the Nonlinear Dielectric-Response Regime

We show that the electronic coupling and magnetic moment of a silver nanoparticle dimer can be readily tuned by applying an electric field in the nonlinear dielectric-response regime. For a given interparticle separation, the electronic coupling becomes tunable as soon as the system crosses over from the linear to nonlinear regime. Remarkably, this transition takes place for modest strengths of the electric field. Further increase of the field strength may close the HOMO-LUMO gap of the dimer due to Stark shifts, accompanied by the emergence of a net magnetic moment from two nonmagnetic building blocks. These findings, obtained within density functional theory, exhibit the delicate coupling between the electronic and magnetic degrees of freedom and point to new approaches to gain multifunctionality of nanoparticle aggregates.

36 MATERIALS SCIENCE↗

Tuning the Er{sup 3+} sensitization by Si nanoparticles in nanostructured as-grown Al{sub 2}O{sub 3} films.

Nanostructured films consisting of single Si nanoparticles (NPs) and Er{sup 3+} ions layers separated by nanometer-scale Al{sub 2}O{sub 3} layers of controlled thickness have been prepared in order to tune the energy transfer between Si NPs and Er{sup 3+} ions. The amorphous Si NPs with an effective diameter of {approx}4.5 nm are formed during growth and are able to sensitize the Er{sup 3+} ions efficiently with no postannealing treatments. The characteristic distance for energy transfer from Si NPs to Er{sup 3+} ions in Al{sub 2}O{sub 3} is found to be in the 1 nm range. It is shown that in the nanostructured films, it is possible to achieve an optimized configuration in which almost all the Er{sup 3+} ions have the potential to be excited by the Si NPs. This result stresses the importance of controlling the dopant distribution at the nanoscale to achieve improved device performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning Effects in Nuclear Excitations

Rational relations in values of stable intervals in near-magic nuclei with Z = 26-29 confirm the presence of tuning effect in nuclear data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Symmetry tuning via controlled crossed-beam energy transfer on the National Ignition Facility

The Hohlraum energetics experimental campaign started in the summer of 2009 on the National Ignition Facility (NIF) [E. I. Moses et al., Phys. Plasmas 16, 041006 (2009)]. These experiments showed good coupling of the laser energy into the targets [N. Meezan et al., Phys. Plasmas 17, 056304 (2010)]. They have also demonstrated controlled crossed-beam energy transfer between laser beams as an efficient and robust tool to tune the implosion symmetry of ignition capsules, as predicted by earlier calculations [P. Michel et al., Phys. Rev. Lett. 102, 025004 (2009)]. A new linear model calculating crossed-beam energy transfer between cones of beams on the NIF has been developed. The model has been applied to the subscale Hohlraum targets shot during the National Ignition Campaign in 2009. A good agreement can be found between the calculations and the experiments when the impaired propagation of the laser beams due to backscatter is accounted for.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of frequency tuning and double-frequency heating on ions extracted from an electron cyclotron resonance ion source

The electromagnetic field within the plasma chamber of an electron cyclotron resonance ion source (ECRIS) and the properties of the plasma waves affect the plasma properties and ion beam production. We have experimentally investigated the ''frequency tuning effect'' and ''double frequency heating'' on the CAPRICE ECRIS device. A traveling wave tube amplifier, two microwave sweep generators, and a dedicated experimental set-up were used to carry out experiments in the 12.5-16.5 GHz frequency range. During the frequency sweeps the evolution of the intensity and shape of the extracted argon beam were measured together with the microwave reflection coefficient. A range of different ion source parameter settings was used. Here we describe these experiments and the resultant improved understanding of these operational modes of the ECR ion source.

43 PARTICLE ACCELERATORS↗