SEARCH · Engineering Papers

Results for “TRAJECTORIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Entry trajectory shaping for Shuttle-deployed experiments

The availability of the Space Transportation System has provided a unique opportunity for deployment of atmospheric entry experiments. These experiments require a trajectory design that provides a well-defined and controlled flight environment. Items addressed in this paper include control of thermal and aerodynamic loading consistent with the test objectives, maintenance of acceptable velocity-altitude conditions, and accommodation of tracking and recovery requirements. Various strategies, including constant-drag flight, equilibrium glide, and controlled linear velocity-altitude flight segments are employed to effect desired trajectory conditions. Algorithms to match thermal constraints to entry conditions and vehicle aerodynamic configuration are also discussed.

Letts, W. R., Jr.↗

NASA NTRS1981

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗

NASA NTRS1981

Experience with flight test trajectory guidance

A system that provides the test pilot with flight test trajectory guidance is presently evolving at the NASA Dryden Flight Research Facility. In use, this system has resulted in discernible improvements in the ease and accuracy with which pilots have approached and maintained the desired flight test conditions or trajectories. This paper describes the use of the guidance system in several past flight programs at Dryden, including the F-111 TACT program, the F-15 airframe/propulsion system interaction program, the F-15 cone transition and boundary layer experiments, and the Space Shuttle tiles flight test program.

Swann, M. R.↗

NASA NTRS1982

Trajectories of solid particles spalled from a carbonaceous heat shield

Trajectories are calculated of solid carbon particles that spall from a carbonaceous heat shield and travel through a given flow field. The mathematical model takes into account mass, momentum, and energy conservation during evaporation of the particles in an effort to understand spallation phenomena and their consequences in a physical way. The solution technique is applied to available Galileo Probe flow field solutions. Plots of trajectories and other particle parameters are presented for a range of initial particle sizes and velocities. It is shown that a significant amount of gaseous carbon is deposited in the inviscid region and ahead of the bow shock as well as in the ablation layer.

Davies, C. B.↗

NASA NTRS1981

Piloted simulation of an on-board trajectory optimization algorithm

This paper will describe a real time piloted simulation of algorithms designed for on-board computation of time-optimal intercept trajectories for an F-8 aircraft. The algorithms, which were derived using singular perturbation theory, generate commands that are displayed to the pilot on flight director needles on the 8-ball. By flying the airplane so as to zero the horizontal and vertical needles, the pilot flies an approximation to a time-optimal intercept trajectory. The various display and computation modes that are available will be described and results will be presented illustrating the performance of the algorithms with a pilot in the loop.

Price, D. B.↗

NASA NTRS1982

Earth-return trajectory options for the 1985-86 Halley opportunity

A unique and useful family of ballistic trajectories to Halley's comet is described. The distinguishing feature of this family is that all of the trajectories return to the Earth's vicinity after the Halley intercept. It is shown that, in some cases, the original Earth-return path can be reshaped by Earth-swingby maneuvers to achieve additional small-body encounters. One mission profile includes flybys of the asteroid Geographos and comet Tempel-2 following the Halley intercept. Dual-flyby missions involving comets Encke and Borrelly and the asteroid Anteros are also discussed. Dust and gas samples are collected during the high-velocity (about 70 km/sec) flythrough of Halley, and then returned to a high-apogee Earth orbit. Aerobraking maneuvers are used to bring the sample-return spacecraft to a low-altitude circular orbit where it can be recovered by the Space Shuttle.

Farquhar, R. W.↗

NASA NTRS1982

Statistics of Delta v magnitude for a trajectory correction maneuver containing deterministic and random components

A number of interplanetary missions now being planned involve placing deterministic maneuvers along the flight path to alter the trajectory. Lee and Boain (1973) examined the statistics of trajectory correction maneuver (TCM) magnitude with no deterministic ('bias') component. The Delta v vector magnitude statistics were generated for several values of random Delta v standard deviations using expansions in terms of infinite hypergeometric series. The present investigation uses a different technique (Monte Carlo simulation) to generate Delta v magnitude statistics for a wider selection of random Delta v standard deviations and also extends the analysis to the case of nonzero deterministic Delta v's. These Delta v magnitude statistics are plotted parametrically. The plots are useful in assisting the analyst in quickly answering questions about the statistics of Delta v magnitude for single TCM's consisting of both a deterministic and a random component. The plots provide quick insight into the nature of the Delta v magnitude distribution for the TCM.

Bollman, W. E.↗

NASA NTRS1983

Interplanetary trajectory design for the Galileo mission

The Galileo mission has been reprogrammed to use a direct earth-Jupiter trajectory with a May 1986 launch date and with arrival at Jupiter occurring in mid-1988. Within the constraints of Shuttle/Centaur launch vehicle capability and total spacecraft mass and performance, optimal broken-plane trajectories are generated, and the region of positive propellant margin in the launch/arrival space is determined. Mission constraints are used to define a launch/arrival strategy. It is also shown that a close flyby of any one of several asteroids or a comet is possible on the interplanetary transfer with minimal impact on mission performance.

Damario, L. A.↗

NASA NTRS1983

Application of the rectilinear impact pseudostate method to modeling of third-body effects on interplanetary trajectories

Interplanetary transfer trajectories, subject to the third-body gravitational attraction of the departure and arrival planets, noticeably deviate from the conic Lambert theorem solutions. The pseudostate method represents a useful improvement over conic theory by allowing the spacecraft motion about the sun and each terminal body to be superimposed, provided certain rules are followed. The new variant of the method requires iteration on time along the two planetocentric rectilinear impact trajectories. The operational equivalence of the method to the point-to-point Lambert formulation is an attractive feature, already used to advantage in the generation of mission design data

Sergeyevsky, A. B.↗

NASA NTRS1983

Separation of time scales in aircraft trajectory optimization

Two methods for analyzing the time-scale properties of aircraft trajectory optimization problems are presented. Time-scale properties must be identified before solutions can be obtained by using singular perturbation methods. Both methods only require a knowledge of the state equations, the aircraft characteristics, and the bounds on the state and control variables. Although these methods give only rough estimates of time-scale separation, they do not require that an 'exact' optimal trajectory be known, as do the more rigorous methods, and they are an improvement on the ad hoc methods currently in use. The two methods are applied to an example problem for a high performance aircraft.

Ardema, M. D.↗

NASA NTRS1983

Mission and trajectory design for the Venus orbiting imaging radar

Results of mission and trajectory design for the Venus Orbiting Imaging Radar are presented. Because of the application of the aerobraking technique, for the first time to a planetary mission, the conventional mission design criteria in the selection of the launch/arrival dates must be modified and new mission constraints must be imposed. Venus itself poses an interesting aspect in trajectory design for an orbiting spacecraft due to its dense lower atmosphere and its slow retrograde rotation. Some recent results in the method of averaging applied to an orbiting spacecraft about this unique planet are given.

Kwok, J. H.↗

NASA NTRS1984

Alternative gravity-assist sequences for the ISEE-3 escape trajectory

The International Sun-Earth Explorer-3 (ISEE-3) was moved from its mission halo orbit upstream of the earth's magnetosphere on June 10, 1982. Multiple lunar swingby maneuvers were then used to shape the trajectory for extensive exploration of the distant geomagnetic tail and finally to place the spacecraft on a course that will intercept the comet Giacobini-Zinner on September 11, 1985. With this new mission objective, the spacecraft was renamed the International Cometary Explorer (ICE). A double-lunar-swingby control technique involving five passes by the moon was eventually implemented to accomplish this, but in the process of finding this solution several feasible, though less optimal, alternative trajectory sequences implementing the same procedure were discovered. This paper provides a descriptive comparison of these very different orbital profiles and serves to illustrate the utility and great flexibility of this orbital control procedure. Targeting methodology for finding constrained solutions in this space is also presented.

Muhonen, D.↗

NASA NTRS1984

A numerical investigation of planetesimal collision trajectories with a Moon accumulating in Earth orbit

In the scenario of lunar origin in which the Moon is assumed to have accreted most of its mass while in orbit about the Earth, ismals on the accrea knowledge of the relative impact rates of heliocentric planetting Earth and Moon is essential for any attempt to establish dynamical constraints on lunar origin. Numerical integrations of the regularized equations of motion for four bodies (Sun, Earth, Moon, planetismal) were done. A planetismal impact trajectory was calculated by assuming that the planetismal has hit the surface of the Moon at an assumed location, traveling in an assumed direction, and with an assumed impact speed. Next, the equations of motion were numerically integrated backward in time in order to determine from where the planetismal has come. In this way those volumes in heliocentric orbital element space which contribute trajectories that directly impact the Moon.

Cox, L. P.↗

NASA NTRS1985

An analytic solution for the state trajectories of a feedback control system

In connection with the normal process of control system design, the determination of the state trajectories for the controlled system is frequently required. The procedure involved in the determination is straightforward. However, extensive computations may be needed, if either time-varying control gains are used, or if small integration step sizes are required by the presence of high-frequency system dynamics. The present investigation is concerned with an approach for overcoming the computational difficulties, taking into account a change of variables for the close-loop system dynamics equation. This procedure makes it possible to obtain a closed-form expression for the state trajectories.

Turner, J. D.↗

NASA NTRS1985

Atmospheric guidance law for planar skip trajectories

The applicability of an approximate, closed-form, analytical solution to the equations of motion, as a basis for a deterministic guidance law for controlling the in-plane motion during a skip trajectory, is investigated. The derivation of the solution by the method of matched asymptotic expansions is discussed. Specific issues that arise in the application of the solution to skip trajectories are addressed. Based on the solution, an explicit formula for the approximate energy loss due to an atmospheric pass is derived. A guidance strategy is proposed that illustrates the use of the approximate solution. A numerical example shows encouraging performance.

Mease, K. D.↗

NASA NTRS1985

On orbit mission planning using the shuttle trajectory and launch window expert system

With the Space Transportation System (STS) entering the operational era, the need for standardized, automated, mission planning computer tools has become apparent. In order to support an increased flight rate without an increase in manpower, quicker and more efficient methods are needed to perform standard tasks. The Shuttle Trajectory and Launch Window Expert System (STALEX) was developed to automate many aspects of early mission planning for space shuttle missions carrying geosynchronous communications satellites. Most of the commercial Shuttle missions planned for the next 3 years will carry at least one of this type of satellite. The applications of STALEX include payload deployment scheduling, launch window analysis, orbital trajectory determination, and landing opportunity selection.

Ahlf, P. R.↗

NASA NTRS1986

Trajectory options for the Mariner Mark II Tempel 2 rendezvous mission

Recent schedule changes have motivated a reassessment of the mission options for the Mariner Mark II Comet Rendezvous Asteroid Flyby. A new baseline mission has been selected, which will launch in September 1992 and arrive at comet Tempel 2 in December 1996. The geometry of the comet's orbit imposes on the mission total delta-V requirements that can best be met by selection of a delta-V-EGA trajectory, during which an earth gravity assist is used to improve mission performance. There is considerable freedom in the choice of comet arrival date and asteroid flyby targets; associated with each potential asteroid flyby is a different penalty in terms of delta-V and comet arrival data. Analysis of the trajectory and the asteroid flyby options will continue throughout the early phases of the Project.

Stetson, D. S.↗

NASA NTRS1986

Pathfinder - Accuracy improvement of comet Halley trajectory for Giotto navigation

The 'Pathfinder' project uses the resources of NASA, ESA and Intercosmos to support the Giotto space probe flyby of comet Halley. The required 500-km approach to comet Halley on the sunward side was so uncertain as to preclude the trajectory's realization with sufficient accuracy on the basis of ground-based astronomical observations alone. Spaceborne observations by the two Vega satellites were accordingly conducted; these, in combination with a very accurate determination of the Vega trajectories using VLBI, allowed a flyby distance of 600 km to be achieved with only + or - 40 km uncertainty.

Muench, R. E.↗