Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Parallel-Plate Capacitor TiN KIDs for Infrared Astronomy

The Balloon Experiment for Galactic INfrared Science (BEGINS) is a concept for a sub-orbital observatory that will characterize dust in the vicinity of high-mass stars. It requires detectors with NEPs from 2x10 -16 W Hz -1/2 to 6x10 -17 W Hz -1/2 from 25-250 microns, respectively. The mission’s sensitivity requirements will be met by utilizing arrays of 1,840 lens-coupled, lumped-element kinetic inductance detectors (KIDs) operating at 300 mK. Each KID will consist of a titanium nitride (TiN) parallel strip absorbing inductive section and parallel plate capacitor deposited on a Silicon (Si) substrate. The parallel plate capacitor geometry allows for reduction of the pixel spacing. We present the optical performance of a prototype BEGINS KID array at 25 microns when coupled to Fresnel zone plate lenses. We present sensitivity, optical efficiency and quasiparticle lifetime measurements taken in a cryogenic test bed with a cryogenic blackbody.

Joanna Perido↗

Pressure-temperature phase diagram for a tin modified lead zirconate titanate ceramic.

Structural phase transformations between ferroelectric (FE), antiferroelectric (AFE), and paraelectric (FE) phases are frequently observed in the zirconia-rich phase region on the lead zirconate-titanate (PZT) phase diagram. Since the free energy difference among these phases is small, phase transformation can be easily induced by temperature, pressure and electric field. These induced transformation characteristics have been used for many practical applications. This study focuses on a hydrostatic pressure induced FE-to-AFE phase transformation in a tin modified PZT ceramic (PSZT). The relative phase stability between FE and AFE phases is determined by the dielectric permittivity measurement as a function of temperature from -60 C to 125 C. A pressure-temperature phase diagram for the PSZT system will be presented.

36 MATERIALS SCIENCE↗

Effect of dc bias and hydrostatic pressure on the ferroelectric-antiferroelectric phase transformation in a tin modified lead zirconate titanate ceramic.

Phase transformation between the ferroelectric (FE) and the antiferroelectric (AFE) phases in tin modified lead zirconate titanate (PSZT) ceramics can be influenced by pressure and electric field. Increasing the pressure has the tendency to favor the AFE phase while electric field favors the FE phase. In this study, these phase transformations are studied as functions of external pressure, temperature, and dc bias. The shifting of transformation temperature and the relative phase stability between FE and AFE with respect to these external parameters will be presented. Results will be compared to a pressure-induced depoling behavior (or FE-to-AFE phase transformation) for the PSZT ceramic. Fundamental issues relates to the relative phase stability will be discussed from the perspective of lattice dynamics theory.

99 GENERAL AND MISCELLANEOUS↗

Anisotropic shock response of single-crystalline β-phase tin shock physics, molecular dynamics, plasticity

Mesoscale simulations of the dynamic response of polycrystalline metals to shockwave compression can provide unique insight in to the nature of the various physical mechanisms responsible for material failure. This approach requires a constitutive description for individual grains and boundaries, including defects such as dislocations, within an explicit representation of the microstructure geometry and evolving deformation fields. Computational models of the single-crystal constituents cannot be unambiguously constrained by traditional measurements of the shock or stress-strain response of polycrystalline metals. Instead, these models require comprehensive measurements of the anisotropic shock response of single crystals for their calibration and validation. We present a coordinated experimental and simulation campaign on the shock response of single-crystalline β-phase tin demonstrating a remarkable anisotropic elastic-plastic response of the metal. This anisotropy will be explained with the help of molecular dynamics simulations that show preferred twinning in one orientation.

36 MATERIALS SCIENCE↗

On the Homogeneity of TiN Kinetic Inductance Detectors Produced through Atomic Layer Deposition

The non-homogeneity in the critical temperature $T_{c}$ of an Microwave Kinetic Inductance Detector (MKID) could be caused by non-uniformity in the deposition process of the thin superconducting film. This produces low percent yield and frequency collision in the readout of the MKIDs. Here, we show the homogeneity that offers Atomic Layer Deposition (ALD). We report an improvement of up to a factor of 50 in the fractional variation of the $T_{c}$ for TiN MKIDs fabricated with Atomic Layer Deposition in comparison with MKIDs fabricated with sputtering. We measured the critical temperature of 48 resonators. We extracted the $T_{c}$ of the MKIDs by fitting the fractional resonance frequency to the complex conductivity of their resonators. We observed uniformity on the critical temperature for MKIDs belonging to the same fabrication process, with a maximum change in the $T_{c}$ of 60 mK for MKIDs fabricated on different wafers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator C

A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobium-tin has been established as a promising next generation SRF material, but development has focused primarily in high- beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarter wave cavities (that are subsequently smaller) as well as for significantly lowered cooling requirements (possibly leading to cryocooler based designs). The fabrication, initial cold testing, and Nb3Sn coating are discussed as well as test plans and details of future applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optical potentials for nuclear level structures and nucleon interactions data of tin isotopes based on the soft-rotator model

The soft-rotator model is applied to self-consistent analyses of the nuclear level structures and the nucleon interaction data of the even-even Sn isotopes, {sup 116}Sn, {sup 118}Sn, {sup 120}Sn, and {sup 122}Sn. The model successfully describes low-lying collective levels of these isotopes, which exhibit neither typical rotational nor harmonic vibrational structures. The experimental nucleon interaction data--total neutron cross sections, proton reaction cross sections, and nucleon elastic and inelastic scattering data--are well described up to 200 MeV in a coupled-channels optical model approach. For the calculations, nuclear wave functions for the Sn isotopes are taken from the nonaxial soft-rotator model with the model parameters adjusted to fit the measured low-lying collective level structures. We find that the {beta}{sub 2} and {beta}{sub 3} deformations for incident protons are larger than those for incident neutrons by {approx}15%, which is clear evidence of the deviation from the pure collective model for these isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematization of cross sections for the production of residual nuclei on separated tin isotopes in reactions induced by various-energy protons

Cross sections for the production of residual nuclei on the isotopes {sup 112,118,120,124}Sn irradiated with 0.66-, 1.0-, 3.65-, and 8.1-GeV proton beams were investigated. A ten-parameter semiempirical formula was used to systematize the cross sections in question. A comparative analysis of parameter values obtained at different proton energies was performed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Solid-to-solid phase transformations of nanostructured selenium-tin thin films induced by thermal annealing in oxygen atmosphere

The structural and morphological evolution of nanostructured thin films obtained from thermal evaporation of polycrystalline Sn-Se starting charge as a function of the subsequent annealing temperature in an oxygen flow has been analysed. High-resolution transmission electron microscopy, small area electron diffraction, digital image processing, x-ray diffraction and Raman spectroscopy have been employed in order to investigate the structure and the morphology of the obtained films. The results evidenced, in the temperature range from RT to 500°C, the transition of the material from a homogeneous mixture of SnSe and SnSe{sub 2} nanocrystals, towards a homogeneous mixture of SnO{sub 2} and SeO{sub 2} nanocrystals, with an intermediate stage in which only SnSe{sub 2} nanocrystals are present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-consistent calculations of the strength function and radiative neutron capture cross section for stable and unstable tin isotopes

The E1 strength function for 15 stable and unstable Sn even-even isotopes from A=100 to A=176 are calculated using a self-consistent microscopic theory which, in addition to the standard (quasiparticle) random-phase approximation [(Q)RPA] approach, takes into account phonon coupling and the single-particle continuum (by means of the discretization procedure) with a cutoff of 100 MeV. Our analysis shows two distinct regions for which the integral characteristics of both the giant and pygmy resonances behave rather differently. For neutron-rich nuclei, starting from {sup 132}Sn, we obtain a giant E1 resonance which significantly deviates from the widely used systematics extrapolated from experimental data in the {beta}-stability valley. We show that the inclusion of phonon coupling is necessary for a proper description of the low-energy pygmy resonances and the corresponding transition densities for A<132 nuclei, while in the A>132 region the influence of phonon coupling is significantly smaller. The radiative neutron capture cross sections leading to the stable {sup 124}Sn and unstable {sup 132}Sn and {sup 150}Sn nuclei are calculated with both the (Q)RPA and the beyond-(Q)RPA strength functions and shown to be sensitive to both the predicted low-lying strength and the phonon-coupling contribution. The comparison with the widely used phenomenological generalized Lorentzian approach shows considerable differences both for the strength function and the radiative neutron capture cross section. In particular, for the neutron-rich {sup 150}Sn, the reaction cross section is found to be increased by a factor greater than 20. We conclude that the present approach may provide a complete and coherent description of the {gamma}-ray-strength function for astrophysics applications. In particular, such calculations are highly recommended for a reliable estimate of the electromagnetic properties of exotic nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Impurity centers of tin in glassy arsenic chalcogenides

{sup 119}Sn atoms produced by radioactive decay of {sup 119}Sb impurity atoms in the structure of As{sub x}S{sub 1-x} and As{sub x}Se{sub 1-x} glasses are stabilized in the form of Sn{sup 2+} and Sn{sup 4+} ions at arsenic sites and correspond to ionized states of the amphoteric two-electron center with negative correlation energy (Sn{sup 2+} is an ionized acceptor, and Sn{sup 4+} is an ionized donor), whereas the neutral state of the Sn{sup 3+} center is unstable. The fraction of Sn{sup 4+} states increases with chalcogen content in glass. {sup 119}Sn atoms produced by radioactive decay of {sup 119m}Te impurity atoms in the structure of As{sub x}S{sub 1-x} and As{sub x}Se{sub 1-x} glasses are stabilized at chalcogen sites (they are electrically inactive) and arsenic sites, and the fraction of arsenic atoms decreases with the chalcogen content in glass.

36 MATERIALS SCIENCE↗

Preparation, crystal structure and photoluminescence of garnet-type calcium tin titanium aluminates

Colorless and transparent single crystals of Ca{sub 3}Sn{sub 2.2}Ti{sub 0.8}Al{sub 2}O{sub 12}, which emit blue-white light under ultraviolet light, were prepared by heating a mixture of oxides and calcium carbonate with a calcium and aluminum-rich composition at 1500 {sup o}C. Single crystal X-ray diffraction revealed that the crystal structure is the garnet-type with a cubic cell parameter (a=12.5309(3) A) and the space group, Ia 3-bar d (R1=0.0277, wR2=0.0663, and S=1.367 for all data). The structural formula is presented as Ca{sub 3}[Sn{sub 0.96}Ti{sub 0.04}]{sub octa}[Al{sub 0.67}Ti{sub 0.24}Sn{sub 0.09}]{sub tetra}O{sub 12}. Polycrystalline solid solutions of Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} were prepared by solid state reaction in air at 1370 {sup o}C with nominal titanium contents from x=0.6 to 1.4. The refined unit cell parameter decreased with increasing x. A broad blue-white emission with a peak wavelength of 465 nm was observed for the solid solutions at room temperature. -- Graphical abstract: Garnet-type solid solutions of Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} (x=0.6-1.4) were prepared. Sn{sup 4+} and Ti{sup 4+} partially occupy both tetrahedral and octahedral sites. The solid solutions showed a broad emission band peaking at 465 nm under UV excitation. Display Omitted Research highlights: {yields} New garnet-type solid solutions were found in the CaO-Al{sub 2}O{sub 3}-TiO{sub 2}-SnO{sub 2} system. {yields} Single crystals of Ca{sub 3}Sn{sub 2.2}Ti{sub 0.8}Al{sub 2}O{sub 12} were obtained by the self-flux method. {yields} Solid solutions with nominal compositions Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} (x=0.6-1.4) were prepared by solid state reaction at 1370 {sup o}C. {yields} Sn{sup 4+} and Ti{sup 4+} partially occupy both tetrahedral and octahedral sites, respectively, in the garnet-type structure. {yields} Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} solid solutions emitted blue-white light with a peak wavelength at 465 nm under UV irradiation.

36 MATERIALS SCIENCE↗

Carbon supported tin-based nanocomposites as anodes for Li-ion batteries

SnO{sub 2} (Sn)/C composites as anodes for Li-ion batteries were fabricated by a simple chemical process of hydrothermal synthesis and subsequent heat treatment. The as-prepared materials were characterized by various analytic techniques. Results show that heat treatment temperature has a strong influence on physical and electrochemical performance of these composites. In these composites, irregular SnO{sub 2} lamellas arranged like chrysanthemum were dispersed among the elastic carbon matrix for rapid access of lithium ions to the material bulk. SnO{sub 2}/C anode heat-treated at a temperature of 600 Degree-Sign C exhibits a reversible capacity of 533.4 mAh/g after 50 cycles at the current density of 100 mA/g. - Graphical abstract: Chrysanthemum-like microstructures SnO{sub 2} grains expand along two-dimensional direction during cycling. The intervals among adjacent SnO{sub 2} lamellas provide the sites for lithium insertion and the space for volume expansion. After long cycling, SnO{sub 2} lamellas adhere together to form compact layers, which preserved the integrity of the structure. Highlights: Black-Right-Pointing-Pointer Carbon supported SnO{sub 2} (Sn)/C composites have been synthesized. Black-Right-Pointing-Pointer Temperature control affects the physical and electrochemical performance. Black-Right-Pointing-Pointer Clusters of chrysanthemum-like microstructures were observed. Black-Right-Pointing-Pointer Intervals exist between SnO{sub 2} layers. Black-Right-Pointing-Pointer Integrity structure of SnO{sub 2}/C composites was preserved.

36 MATERIALS SCIENCE↗

Synthesis, structure and electrical properties of a new tin vanadium selenide

The turbostratically disordered misfit layer compound (SnSe){sub 1.15}VSe{sub 2} was synthesized and structurally characterized. Electrical transport measurements suggest this compound undergoes a charge or spin density wave (CDW or SDW) transition, which has not been observed in previous misfit layer compounds. The (SnSe){sub 1.15}VSe{sub 2} compound, created through the modulated elemental reactants technique, contains highly oriented intergrowths of SnSe bilayers and VSe{sub 2} structured Se–V–Se trilayers with abrupt interfaces between them perpendicular to the c-axis. X-ray diffraction data and transmission electron microscope images show that each constituent has in-plane crystallinity but that there is a random rotational disorder between the constituent layers. Temperature-dependent electrical resistivity data and Hall measurements are consistent with (SnSe){sub 1.15}VSe{sub 2} being a metal, however an abrupt increase in the resistivity occurs between 30 and 100 K. The carrier concentration decreases by approximately 1 carrier per vanadium atom during this temperature interval. - Graphical abstract: Turbostratically disordered (SnSe){sub 1.15}VSe{sub 2}. - Highlights: • New compound (SnSe){sub 1.15}VSe{sub 2}. • Turbostratic disorder. • Charge density wave at 100 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microemulsion-mediated solvothermal synthesis of tin(IV) hydrogen phosphate rose-like three-dimensional nanostructures and their electrochemical properties

Novel rose-like three-dimensional Sn(HPO{sub 4}){sub 2}.H{sub 2}O nanostructures self-assembled by tightly stacked nanopetals were successfully synthesized by a simple cetyltrimethylammonium bromide (CTAB)/water/cyclohexane/n-pentanol microemulsion system under solvothermal conditions for the first time. A series of compared experiments were carried out to investigate the factors that influence the morphology and size of the products. It was found that the molar ratio of water to CTAB and the concentration of SnCl{sub 4} aqueous solution play important roles in the formation of the rose-like nanostructures. A possible formation mechanism of rose-like nanostructures was proposed, which may be related to the crystal structure of Sn(HPO{sub 4}){sub 2}.H{sub 2}O and the spherical micelles formed by the microemulsion. The electrochemical properties of Sn(HPO{sub 4}){sub 2}.H{sub 2}O were investigated through cyclic voltammetry (CV) measurements. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and field-emission scanning electron microscope (FE-SEM) were used to characterize the products.

36 MATERIALS SCIENCE↗

Photo-induced refractive index change of amorphous tin-doped As{sub 2}S{sub 8} films and its application to strip waveguide fabrication

The amorphous chalcogenide glass Sn{sub 1}As{sub 20}S{sub 79} is demonstrated to undergo permanent changes in refractive index on irradiation with ultraviolet light. The refractive properties of this material and the effect of annealing at temperatures below the glass transition temperature are investigated in detail. An Sn{sub 1}As{sub 20}S{sub 79} strip waveguide is fabricated using this photoinduced refractive index change, and the device is shown to function as expected with good propagation characteristics for the 632.8 nm guided mode.

36 MATERIALS SCIENCE↗

Photoinduced conductivity in tin dioxide thin films

The effects of ultraviolet light irradiation on the conducting properties of SnO{sub 2-x} thin films grown epitaxially on TiO{sub 2} or Al{sub 2}O{sub 3} single-crystal substrates are studied at room temperature. A large increase in conductivity by two to four orders of magnitude is observed with light irradiation in an inert atmosphere and remains after the light is removed. The high-conducting state reverts to the original low-conducting state by exposing it to oxygen gas. These reversible phenomena are ascribed to the desorption and adsorption of negatively charged oxygen species at the grain boundaries, which critically change the mobility of electron carriers already present inside grains by changing the potential barrier height at the grain boundary. The UV light irradiation provides us with an easy and useful route to achieve a high-conducting state even at low carrier density in transparent conducting oxides and also to draw an invisible conducting wire or a specific pattern on an insulating film.

36 MATERIALS SCIENCE↗