Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE COEFFICIENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Some observations in high pressure rheology of lubricants

Experimental data are presented on viscosity, elastic shear modulus, and limiting shear stress of 12 liquid lubricants. It is shown that transition histories do affect the limiting shear stress of the materials in the form of isothermal compression resulting in a lower density and lower limiting stress than isobaric cooling. The measured limiting shear stress agrees with EHD traction data at slide-to-roll ratios of 0.1 or more. In pressure viscosity measurements of the polymer solutions, it is found that for some temperatures, the pressure viscosity coefficient of the blend is slightly less than that of the base, which results in the crossing of the viscosity-pressure isotherms at high pressures.

Bair, S.↗
NASA NTRS1982

Effective temperatures of A and F stars

Effective temperatures of late A and early F stars are determined from the observed fluxes in the visual at 1900 A and 1420 A. The observed ratios are compared with those calculated by Kurucz (1979). A correction of the theoretical fluxes at 1900 A brings the effective temperatures obtained from different ratios into reasonable agreement. The effective temperatures determined in this way for late A stars agree well with those obtained from the optical region. For F stars, however, the effective temperatures obtained from the UV are found to be higher than those obtained from the optical region if radiative equilibrium models are used for the comparison. It is thought that this discrepancy may derive from the effects of temperature, pressure, and absorption coefficient inhomogeneities caused by convection.

Boehm-Vitense, E.↗
NASA NTRS1982

Stratospheric measurements of collision-induced absorption by molecular oxygen

High-resolution stratospheric solar absorption spectra recorded at sunset with a balloon-borne interferometer, from an altitude of 33 km, are used in a study of collision-induced absorption by the fundamental vibration-rotation band of O2, whose continuum has been identified in the 1400-1700/cm region in spectra obtained at tangent altitudes below 22 km. It is found that transmittance measurements in intervals free of atmospheric line absorption agree with values calculated with the O2 absorption coefficients of Timofeyev and Tonkov (1978), and that the measurements indicate a 20% upper limit for the uncertainty of the available O2 absorption coefficients at lower stratospheric temperatures, on the order of 220 K.

Rinsland, C. P.↗
NASA NTRS1983

Cape Canaveral, Florida range reference atmosphere 0-70 km altitude

The RRA contains tabulations for monthly and annual means, standard deviations, skewness coefficients for wind speed, pressure temperature, density, water vapor pressure, virtual temperature, dew-point temperature, and the means and standard deviations for the zonal and meridional wind components and the linear (product moment) correlation coefficient between the wind components. These statistical parameters are tabulated at the station elevation and at 1 km intervals from sea level to 30 km and at 2 km intervals from 30 to 90 km altitude. The wind statistics are given at approximately 10 m above the station elevations and at altitudes with respect to mean sea level thereafter. For those range sites without rocketsonde measurements, the RRAs terminate at 30 km altitude or they are extended, if required, when rocketsonde data from a nearby launch site are available. There are four sets of tables for each of the 12 monthly reference periods and the annual reference period.

Tingle, A.↗
NASA NTRS1983

Plasmapause diffusion

The Bohm diffusion coefficient and observed electrostatic wave scattering are used as the bases of estimates of the smoothing effect that diffusion may have on steep plasmapause density gradients. The estimate for diffusion resulting from scattering by observed electrostatic waves is found to be much lower than that of the perpendicular Bohm diffusion coefficient for characteristic plasma temperatures and magnetic fields. This diffusion rate estimate may be too small, however, if the wave amplitudes are significantly higher for steep plasmapauses. The effects are therefore negligible for most considerations of macroscopic plasmapause dynamics, but may be significant in limiting drift wave instabilities and similar phenomena driven by the steepness of the plasmapause density gradient.

Horwitz, J. L.↗
NASA NTRS1986

Thermoelectric converter for SP-100 space reactor power system

Conductively coupling the thermoelectric converter to the heat source and the radiator maximizes the utilization of the reactor and radiator temperatures and thereby minimizes the power system weight. This paper presents the design for the converter and the individual thermoelectric cells that are the building block modules for the converter. It also summarizes progress on the fabrication of initial cells and the results obtained from the preparation of a manufacturing plan. The design developed for the SP-100 system utilizes thermally conductive compliant pads that can absorb the displacement and distortion caused by the combinations of temperatures and thermal expansion coefficients. The converter and cell designs provided a 100 kWe system which met the system requirements. Initial cells were fabricated and tested.

Terrill, W. R.↗
NASA NTRS1986

The Nimbus 7 LIMS map archival tape

The development of the Langley Map Archival Tape (LAMAT) is described. The role of the Nimbus 7 orbit characteristics in the analysis and interpretation of LAMAT data is discussed. The pressure ranges and heights for the LAMAT components are given and the synoptic fields for each pressure and latitude were modeled as Fourier series in longitude with time-dependent coefficients. Examples of LAMAT temperature fields are presented and the accuracies of the LAMAT fields are evaluated. The fit between the Langley inverted profile archival tape (LAIPAT) and LAMAT is examined by comparing averaged zonal mean fields and standard deviations. Consideration is given to diurnal variations of LAIPAT data, and the time and spatial smoothing of the data.

Haggard, K. V.↗
NASA NTRS1988

Collisional properties of ice spheres at low impact velocities

The results of experimental studies on the impact properties of water ice are discussed. Stable temperatures of 85 K and pressures as low as 10 to the -5th Torr were achieved using a new apparatus consisting of a compound disk pendulum and a stainless steel, temperature-controlled cryostat. The coefficient of restitution as a function of velocity was obtained for ice spheres with four different radii of curvature and with a variety of surface conditions. These data can be well fitted by an exponetial law epsilon of given form for most measurements. Surface conditions can drastically alter the resulting value of epsilon, however. In particular, the presence of frost or a roughened contact surface can lower epsilon at a given velocity by 10-30 percent from that of a smooth sphere. It is shown how the presence of frost can change the velocity behavior of epsilon from an exponential to a power-law form. The applications of the results to the dynamics of Saturn's rings are discussed.

Hatzes, Artie P.↗
NASA NTRS1987

Independent Orbiter Assessment (IOA): Analysis of the Orbiter Experiment (OEX) subsystem

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Orbiter Experiments hardware. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. The Orbiter Experiments (OEX) Program consists of a multiple set of experiments for the purpose of gathering environmental and aerodynamic data to develop more accurate ground models for Shuttle performance and to facilitate the design of future spacecraft. This assessment only addresses currently manifested experiments and their support systems. Specifically this list consists of: Shuttle Entry Air Data System (SEADS); Shuttle Upper Atmosphere Mass Spectrometer (SUMS); Forward Fuselage Support System for OEX (FFSSO); Shuttle Infrared Laced Temperature Sensor (SILTS); Aerodynamic Coefficient Identification Package (ACIP); and Support System for OEX (SSO). There are only two potential critical items for the OEX, since the experiments only gather data for analysis post mission and are totally independent systems except for power. Failure of any experiment component usually only causes a loss of experiment data and in no way jeopardizes the crew or mission.

Compton, J. M.↗
NASA NTRS1991

Panel flutter in a low-density atmosphere

The problem of panel flutter is considered in the case of a free-molecule flow, the effect of the aerodynamic shear stress being incorporated into the structural model through distributed longitudinal and bending moment loads. This kind of analysis is relevant in the case of hypersonic flight vehicles, like the NASP, especially because in these conditions the shear stress can be expected to be considerably larger that the pressure at a given point. The aerodynamic loading is derived assuming a quasi-steady approximation. Two important parameters are given by alpha-m, the 'momentum accommodation coefficient', and Theta, the temperature ratio between the panel temperature and the temperature of the undisturbed flow. For high enough values of Theta the variation of the linear flutter parameter with alpha-m is close to linear. Comparison with continuum theory, given by linear piston theory, depends on the values of Theta and alpha-m considered. Finally, it is shown that buckling with respect to a uniform distributed longitudinal load is stabilizing.

Resende, Hugo B.↗
NASA NTRS1994

Characterization of Damage Progression in SCS-6/timetal 21S (0)4 Under Thermomechanical Fatigue Loadings

A detailed experimental investigation was performed at a single maximum cyclic stress (sigma max) level to physically characterize the progression of thermomechanical fatigue (lW) damage in continuously reinforced (0 deg) SCS-6/Timetal 21S, a titanium matrix composite. In-phase (IP) and out of-phase (OP) loadings were investigated at sigma max = 1000 MPa with a temperature cycle from 150 to 6500 C. Damage progression, in terms of macroscopic property degradation, was experimentally quantified through an advanced TMF test methodology which incorporates explicit measurements of the isothermal static moduli at the TMF temperature extremes and the coefficient of thermal expansion (CTE) as functions of the TMF cycles. Detailed characterization of the physical damage progression at the microstructural level was performed by interrupting multiple TMF tests at various stages of mechanical property degradation and analyzing the microstructure through extensive destructive metallography. Further, the extent of damage was also quantified through residual static strength measurements. Results indicated that damage initiation occurred very early in cyclic life (N less than 0.1Nf) for both the IP and OP TMF loadings. IP TMF damage was found to be dominated by fiber breakage with a physical damage progression in the microstructure which was difficult to quantify. OP TMF loadings produced matrix cracking exclusively associated with surface initiations. Here, damage progression was easily distinguished in terms of both the number of cracks and their relative inward progressions toward the outer fiber rows with increased cycling. The point at which the leading cracks reached the outer fiber rows (when localized fiber/matrix de-bonding and matrix crack bridging occurred) appeared to be reflected in the macroscopic property degradation curves.

Castelli, Michael G.↗
NASA NTRS1995

Dual Active Surface Heat Flux Gage Probe

A unique plug-type heat flux gage probe was tested in the NASA Ames Research Center 2x9 turbulent flow duct facility. The probe was fabricated by welding a miniature dual active surface heat flux gage body to the end of a hollow metal cylindrical bolt containing a metal inner tube. Cooling air flows through the inner tube, impinges onto the back of the gage body and then flows out through the annulus formed between the inner tube and the hollow bolt wall. Heat flux was generated in the duct facility with a Huels arc heater. The duct had a rectangular cross section and one wall was fabricated from 2.54 centimeter thick thermal insulation rigid surface material mounted onto an aluminum plate. To measure heat flux, the probe was inserted through the plate and insulating materials with the from of the gage located flush with the hot gas-side insulation surface. Absorbed heat fluxes measured with the probe were compared with absorbed heat fluxes measured with six water-cooled reference calorimeters. These calorimeters were located in a water-cooled metal duct wall which was located across from the probe position. Correspondence of transient and steady heat fluxes measured with the reference calorimeters and heat flux gage probe was generally within a satisfactory plus or minus 10 percent. This good correspondence was achieved even though the much cooler probe caused a large surface temperature disruption of 1000K between the metal gage and the insulation. However, this temperature disruption did not seriously effect the accuracy of the heat flux measurement. A current application for dual active surface heat flux gages is for transient and steady absorbed heat flux, surface temperature and heat transfer coefficient measurements on the surface of an oxidizer turbine inlet deflector operating in a space shuttle test bed engine.

Liebert, Curt H.↗
NASA NTRS1995

Structure and properties of polymeric composite materials during 1501 days outer space exposure at Salyut-7 orbital station

Specimens of polymeric composite materials for aviation and space applications such as glass fiber reinforced plastics (GFRP), carbon fiber reinforced plastics (CFRP), organic fiber reinforced plastics (OFRP), and hybrid plastics (HP) based on epoxy compounds were exposed to the space environment on the surface of Salyut-7 orbital station. The space exposure lasted 1501 days as a maximum. The data relating to the change in mechanical properties, mass losses, glass transition temperature, linear thermal expansion coefficient, and microstructure after various periods of exposure are given. It has been found that the change in properties is caused by the processes of binder postcuring and microerosion of the exposed surface of plastics. The phenomenon of strengthening of the surface layer of hybrid composites, due to which the nature of destruction changes at bending loads, has been revealed.

Startsev, Oleg V.↗
NASA NTRS1997

Calibration of Direct Velocimetry Using Hot Wire Anemometry

We studied the functionality of the IFA300 Hot Wire Anemometry system and its feasibility for the calibration of Direct Estimator Velocimetry (DEV) using Laser Induced Florescence (LIF). The experimental setup consisted of a single-wire hot wire probe measuring one component of velocity, the anemometry computational hardware and software, an HP oscilloscope, and a table fan to produce a simple flow with fluctuations. Measurements were taken at several points in the stream wise and transverse directions in the flow and various parameters recorded such as mean velocities temperature, turbulence intensities, skewness coefficients and flatness coefficients. The IFA300 software also allowed us to perform statistical manipulations such as spectrum analysis on velocities samples and correlation. Utilization of data files, also produced by the anemometry software, and post analysis were performed to produce graphical representations of turbulent intensity versus probe position and a flow field velocity profile. We concluded that the IFA300 Hot Wire Anemometry system is a reliable and functional method for calibration of DEV using LIF. Our future intentions are to set up a test chamber such that both velocity measurement techniques can be applied simultaneously, thus the calibration.

Holland, Michael L.↗
NASA NTRS1995

Preparation and Thermoelectric Properties of IR(sub x)Co(sub 1-x)Sb(sub 2) Alloys

The preparation and characterization of the binary arsenopyrite compounds CoSb2 and IrSb2 and IrxCo1-xSb2 alloys is reported. Single crystals of CoSb2 were grown by the vertical gradient freeze technique from solution rich in antimony. Polycrystalline samples of IrSb2 and IrxCo1-xSb2 alloys were prepared by hot-pressing of prereacted elemental powders. Samples were investigated by X-ray diffractometry, microprobe analysis and density measurements. It was found that a range of solid solution exist in the system IrxCo1-xSb2 for 0.1<x<0.8. Samples were also characterized by high temperature electrical resistivity, Seebeck coefficient and thermal conductivity measurements. All materials have p-type conductivity and are semiconductors. A band gap of about 0.98 eV was calculated for IrSb2. Preliminary measurements of the thermoelectric properties of these materials showed that their potential for thermoelectric applications is limited.

Thermoelectric Properties↗
NASA NTRS2004

Microwave Remote Sensing Modeling of Ocean Surface Salinity and Winds Using an Empirical Sea Surface Spectrum

Active and passive microwave remote sensing techniques have been investigated for the remote sensing of ocean surface wind and salinity. We revised an ocean surface spectrum using the CMOD-5 geophysical model function (GMF) for the European Remote Sensing (ERS) C-band scatterometer and the Ku-band GMF for the NASA SeaWinds scatterometer. The predictions of microwave brightness temperatures from this model agree well with satellite, aircraft and tower-based microwave radiometer data. This suggests that the impact of surface roughness on microwave brightness temperatures and radar scattering coefficients of sea surfaces can be consistently characterized by a roughness spectrum, providing physical basis for using combined active and passive remote sensing techniques for ocean surface wind and salinity remote sensing.

Sea surface spectrum↗
NASA NTRS2008

Reliability of PWB Microvias for High Density Package Assembly

High density PWB (printed wiring board) with microvia technology is required for implementation of high density and high I/O area array packages (AAP). COTS (commercial off-the-shelf) AAP packaging technologies in high reliability versions with 1.27 mm pitch are now being considered for use in a number of NASA systems including Space Shuttle and Mars Rovers. NASA functional system designs are requiring more and more dense AAP packages and board space, which makes board microvia technology very attractive for effectively routing a large number of package inputs/outputs. However, the reliability of the fine feature microvias including via in pads is unknown for space applications. Understanding process and QA (quality assurance) indicators for reliability are important for low risk insertion of these newly available packages and PWBs. This paper presents literature search as well as test results for a high density board subjected to various thermal cycle and reflow profiles representative of tin-lead and lead-free solder reflow. Microvias sizes ranged from two to six mil with and without filling. Daisy chain microvias monitored during the test and PWBs were cross-sectioned to determine failure and locations. Optical and SEM photographs as well as resistance changes during cycling and Tg/Td (glass transition/decomposition temperature) characterisations are presented.

fill via↗