SEARCH · Engineering Papers

Results for “Subsurface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Magnetic field rotation at high solar latitudes

Measurements of the rotation rate of polar magnetic features during 1974-76 lead to a significantly slower rotation rate than that found earlier for polar faculae in 1951-54. Similarly, the rotation rate of these features is slower than the Doppler-determined rate at polar latitudes or the rotation rate of polar filaments. It is suggested that the strong latitude rotation gradient in the subsurface magnetic flux tubes which is implied by these results may presage a very active solar maximum for cycle 21.

Howard, R.↗

NASA NTRS1978

Noble gases in Luna 24 core soils

Isotopic abundances of the noble gases have been determined in grain size separates of six soils from different depths in the Luna 24 core. Concentrations of cosmogenic Ne-21 in these soils show a complex pattern as a function of soil depth, and are inconsistent with a single stage, in situ production in a static regolith or with a simple model of slow accumulation of previously unirradiated soils followed by a static period. All soils have apparently had a complex pre-irradiation history. Some soils show significant differences in the concentration of cosmogenic Ne-21 between different grain sizes, which is consistent with suggestions that they formed as a mixture of soils with different maturities. The exact subsurface depth relationships of the soils are not known, and several possibilities are discussed. Because of this factor and the complex nature of the soils, the cosmogenic Ne data do not define the depositional-irradiational history of the core. Luna 24 core soils may have been deposited any time during the past 300 million years.

Bogard, D. D.↗

NASA NTRS1978

Interior morphology of fresh Martian craters - The effects of target characteristics

The interior morphology of 183 fresh Martian craters observed on Viking imagery was studied. Freshness was determined by rim sharpness and continuity according to the scheme used to classify lunar and Mercurian craters. Results indicate that central-peak and wall degradation features are more common than previously thought. Central peaks are observed in craters as small as 2 km in diameter and in nearly all fresh craters with diameters greater than 10 km. Scallops or terraces are found to occur in all craters with diameters greater than 20 km, and wall slumping seems common in craters from 5 to 10 km in diameter. The ratio of crater diameter to crater floor diameter is significantly larger than for lunar craters. Central peaks and pits are more frequent in craters formed in cratered terrain than in those formed on plains; wall failure occurs at smaller diameters in plains craters. It is suggested that these peculiarities of crater interior morphologies may be due to a subsurface volatile layer. The influence of target variations on the interior morphologies observed in fresh craters was studied. Preliminary results indicate well-defined effects due to target differences.

Wood, C. A.↗

NASA NTRS1979

Average photospheric poloidal and toroidal magnetic field components near solar minimum

Average (over longitude and time) photospheric magnetic field components are derived from 3-min Stanford magnetograms made near the solar minimum of cycle 21. The average magnetograph signal is found to behave as the projection of a vector for measurements made across the disk. The poloidal field exhibits the familiar dipolar structure near the poles, with a measured signal in the line Fe I 5250 A of about 1 G. At low latitudes the poloidal field has the polarity of the poles, but is of reduced magnitude (about 0.1 G). A net photospheric toroidal field with a broad latitudinal extent is found. The polarity of the toroidal field is opposite in the northern and southern hemispheres and has the same sense as subsurface flux tubes giving rise to active regions of solar cycle 21. These observations are used to discuss large-scale electric currents crossing the photosphere and angular momentum loss to the solar wind.

Duvall, T. L., Jr.↗

NASA NTRS1979

Minute tubular forms in soil

Large numbers of long, straight, flattened structures were observed during an electron-microscope study of bacteriophage in aqueous extracts. These structures were called tubules and ranged in width from 10 to 50 nm. Materials and methods were discussed relative to extraction of tubules from soil, electron microscopy, quantitation of tubules in filtrate suspension, tests performed on tubules, plaque formation, and nutrient amendments. It is found that all of the tubules recovered from soil are broken at one or both ends. They are present in surface soils but not in a subsurface sample. Their numbers decrease during bacterial multiplication in soil or broth-containing soil. The tubules appear to be composed of protein that could be disintegrated to liberate nonprotein fibers. A possible clue to the nature of the tubules is their apparent relation to soil bacteria.

Casida, L. E., Jr.↗

NASA NTRS1980

Discharge forecasts in mountain basins based on satellite snow cover mapping

The author has identified the following significant results. A snow runoff model developed for European mountain basins was used with LANDSAT imagery and air temperature data to simulate runoff in the Rocky Mountains under conditions of large elevation range and moderate cloud cover (cloud cover of 40% or less during LANDSAT passes 70% of the time during a snowmelt season). Favorable results were obtained for basins with area not exceeding serval hundred square kilometers and with a significant component of subsurface runoff.

Martinec, J.↗

NASA NTRS1980

Improved PFB operations: 400-hour turbine test results

A pressurized fluidized bed (PFB) coal-burning reactor was used to provide hot effluent gases for operation of a small gas turbine. Preliminary tests determined the optimum operating conditions that would result in minimum bed particle carryover in the combustion gases. Solids were removed from the gases before they could be transported into the test turbine by use of a modified two stage cyclone separator. Design changes and refined operation procedures resulted in a significant decrease in particle carryover, from 2800 to 93 ppm (1.5 to 0.05 grains/std cu ft), with minimal drop in gas temperature and pressure. The achievement of stable burn conditions and low solids loadings made possible a 400 hr test of small superalloy rotor, 15 cm (6 in.) in diameter, operating in the effluent. Blades removed and examined metallographically after 200 hr exhibited accelerated oxidation over most of the blade surface, with subsurface alumina penetration to 20 micron m. After 400 hours, average erosion loss was about 25 micron m (1 mil). Sulfide particles, indicating hot corrosion, were present in depletion zones, and their presence corresponded in general to the areas of adherent solids deposit. Sulfidation appears to be a materials problem equal in importance to erosion.

Rollbuhler, R. J.↗

NASA NTRS1980

Stresses and deformations in elliptical contacts

Topics presented deal with defining conformal and nonconformal surfaces, curvature sum and difference, and surface and subsurface stresses in elliptical contacts. Load-deflection relationships for nonconformal contacts are developed. The deformation within the contact is, among other things, a function of the ellipticity parameter and elliptic integrals of the first and second kinds. Simplified expressions that allow quick calculations of the deformation to be made simply from a knowledge of the applied load, the material properties, and the geometry of the contacting elements are presented.

Hamrock, B. J.↗

NASA NTRS1980

Turbid water measurements of remote sensing penetration depth at visible and near-infrared wavelength

Remote sensing of water quality is dicussed. Remote sensing penetration depth is a function both of water type and wavelength. Results of three tests to help demonstrate the magnitude of this dependence are presented. The water depth to which the remote-sensor data was valid was always less than that of the Secchi disk depth, although not always the same fraction of that depth. The penetration depths were wavelength dependent and showed the greatest variation for the water type with largest Secchi depth. The presence of a reflective plate, simulating a reflective subsurface, increased the apparent depth of light penetration from that calculated for water of infinite depth.

Morris, W. D.↗

NASA NTRS1979

Are early magnesium-rich basalts widespread on the moon

Orbital X-ray data indicate that high-magnesium material systematically occurs along mare/terra boundaries in all the lunar nearside basins for which there is orbital X-ray coverage. These peripheral units appear to represent the earliest stages of volcanism within each of the basins, although they were not necessarily emplaced at the same time in lunar history. High-magnesium subsurface layers excavated by post-mare impact craters in central Mare Crisium and Mare Fecunditatis suggest that the peripheral units are the only visible edges of a basin-wide basalt layer, largely buried by younger less-magnesian flows. This evidence suggests that early magnesium-rich mare basalts are widespread on the moon and that their volumes may be greatly underestimated. Abundant early mare deposits of this type would place severe constraints on models of mare basalt petrogenesis.

Andre, C. G.↗

NASA NTRS1979

Gravity anomaly and structure associated with the Lamont region of the moon

Lamont is a unique lunar feature in southwestern Mare Tranquillitatis associated with radial and concentric ridge patterns and a positive free-air gravity anomaly. Best fitting models to high and low altitude gravity data place nearly all of the anomalous mass in the subsurface, consistent with the hypothesis that Lamont is a mascon. Lamont is positioned on the axis of a 1500 m deep north-south topographic trough occupying western Mare Tranquillitatis. It is proposed that this trough is a synclinal fold in the lunar crust and the tectonic fabric of western Tranquillitatis is consistent with the superposition of the stress fields due to synclinal folding and the loading of the lithosphere by the Lamont mascon.

Dvorak, J.↗

NASA NTRS1979

Pseudocraters on Mars

In the Cydonia region of southern Acidalium Planitia are small, low-relief, apparently volcanic domelike structures, whose size, morphology, and general occurrence suggest they are martian analogs of terrestrial pseudocraters, a type of phreatic eruption. Average base diameters are about 800 m, which is somewhat larger than typical Icelandic examples. All the domes have summit pits; elongate domes generally have elongate summit pits or, in extreme cases, double pits. The greatest concentration of these domes is in a region of subdued fractured plains which may be old volcanic flows. Pseudocraters on the earth are produced when lava flows over water-logged ground. On Mars surface or subsurface ice was the likley medium that produced the steam eruptions resulting in cratered domelike structures on the lava surfaces.

Frey, H.↗

NASA NTRS1979

Mars - CO2 adsorption and capillary condensation on clays: Significance for volatile storage and atmospheric history

Results on the adsorbate-adsorbent system CO2-nontronite are reported at 230, 196, and 158 deg K, covering the range of subsurface regolith temperature on Mars. A three-part regolith-atmosphere-cap model reveals that cold nontronite, and expanding clays in general, are far better but far more complex CO2 adsorbers than cold pulverized basalt. In addition, the layered terrain, and possibly the adjacent debris mantle, contains about 2% or more by mass of atmosphere-exchangeable CO2 and the total regolith inventory of available adsorbed CO2 is estimated to be 400 g/ sq cm.

Fanale, F. P.↗

NASA NTRS1980

Temporal variations in regional models of the Sargasso Sea from GEOS-3 altimetry

The paper considers temporal variations in regional models of the Sargasso sea from GEOS-3 telemetry. The methods of regional models and the analysis of overlapping passes are utilized, and short-wave maxima and minima in the regional surface models are examined for correlations with surface and remote sensed infrared temperature data supplemented with subsurface expendable bathythermograph data (XBT). The analysis of overlapping passes provide a better picture of instanteneous sea surface height (SSH) variability through wavelengths greater than 30 km. Correlation studies with cyclonic and anticyclonic ocean eddies from infrared imagery and XBT data indicate satisfactory agreement with equivalent SSH features 98% of the time if the time varying factors are allowed for.

Mather, R. S.↗

NASA NTRS1979

Sunspots and the physics of magnetic flux tubes. IX - Umbral dots and longitudinal overstability

The dynamical properties of the sunspot field and of a column of hot gas confined by such a vertical magnetic field are examined in order to understand the umbral dot within the context of the magnetic sunspot structure. Attention is given to the conditions necessary for gas intrusion, longitudinal as well as convective overstability, the growing modes, and the even mode. With the hypothesis that the subsurface magnetic field of a sunspot splits into many separate flux tubes with field-free gas between, it is suggested that the field-free columns occasionally punch their way up through the overlying magnetic field to the surface, appearing there as the bright, field-free umbral dots. Effects fostering the phenomenon are also discussed, that is, the enhanced temperature of a column of rising gas, the strongly reduced overhead magnetic pressure, and the initiated upward intrusion; these effects are illustrated with examples.

Parker, E. N.↗

NASA NTRS1982

Surface Seal for Carbon Parts

Surface pores in parts made of graphite or reinforced-carbon/ carbon materials are sealed by a silicon carbide-based coating. Coating inhibits subsurface oxidation and lengthens part life. Starting material for coating is graphite felt, which is converted to silicon carbide felt by processing it according to a prescribed time/temperature schedule. Converted felt is pulverized in a ball mill and resulting powder is mixed with an equal weight of black silicon carbide powder. Powder mixture is combined with an equal weight of adhesive to form a paste.

Shuford, D. M.↗

NASA NTRS1982

Laser/Heterodyne Measurement of Temperature and Salinity

Proposed visible-light laser/heterodyne receiver would remotely measure temperature and salinity of subsurface water. Operation is based on acoustic/optical scattering of light by sound waves. Application of this concept is foreseen in current research on energy conversion from ocean currents produced by thermal gradients and on future marine remote-sensing program.

Jobson, D. J.↗

NASA NTRS1980

Evaluation of aircraft microwave data for locating zones for well stimulation and enhanced gas recovery

Imaging radar was evaluated as an adjunct to conventional petroleum exploration techniques, especially linear mapping. Linear features were mapped from several remote sensor data sources including stereo photography, enhanced LANDSAT imagery, SLAR radar imagery, enhanced SAR radar imagery, and SAR radar/LANDSAT combinations. Linear feature maps were compared with surface joint data, subsurface and geophysical data, and gas production in the Arkansas part of the Arkoma basin. The best LANDSAT enhanced product for linear detection was found to be a winter scene, band 7, uniform distribution stretch. Of the individual SAR data products, the VH (cross polarized) SAR radar mosaic provides for detection of most linears; however, none of the SAR enhancements is significantly better than the others. Radar/LANDSAT merges may provide better linear detection than a single sensor mapping mode, but because of operator variability, the results are inconclusive. Radar/LANDSAT combinations appear promising as an optimum linear mapping technique, if the advantages and disadvantages of each remote sensor are considered.

Macdonald, H.↗