Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “States”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effects of composition and pressure on electronic states of iron in bridgmanite

Electronic states of iron in the lower mantle's dominant mineral, (Mg,Fe,Al)(Fe,Al,Si)O 3 bridgmanite, control physical properties of the mantle including density, elasticity, and electrical and thermal conductivity. However, the determination of electronic states of iron has been controversial, in part due to different interpretations of Mössbauer spectroscopy results used to identify spin state, valence state, and site occupancy of iron. We applied energy-domain Mössbauer spectroscopy to a set of four bridgmanite samples spanning a wide range of compositions: 10–50% Fe/total cations, 0–25% Al/total cations, 12–100% Fe 3+ /total Fe. Measurements performed in the diamond-anvil cell at pressures up to 76 GPa below and above the high to low spin transition in Fe 3+ provide a Mössbauer reference library for bridgmanite and demonstrate the effects of pressure and composition on electronic states of iron. Results indicate that although the spin transition in Fe 3+ in the bridgmanite B-site occurs as predicted, it does not strongly affect the observed quadrupole splitting of 1.4 mm/s, and only decreases center shift for this site to 0 mm/s at ~70 GPa. Thus center shift can easily distinguish Fe 3+ from Fe 2+ at high pressure, which exhibits two distinct Mössbauer sites with center shift ~1 mm/s and quadrupole splitting 2.4–3.1 and 3.9 mm/s at ~70 GPa. Correct quantification of Fe 3+ /total Fe in bridgmanite is required to constrain the effects of composition and redox states in experimental measurements of seismic properties of bridgmanite. Furthermore, in Fe-rich, mixed-valence bridgmanite at deep-mantle-relevant pressures, up to ~20% of the Fe may be a Fe 2.5+ charge transfer component, which should enhance electrical and thermal conductivity in Fe-rich heterogeneities at the base of Earth's mantle.

58 GEOSCIENCES↗
DOE OSTI2024

Exploring the impact of the local environment on charge transfer states at molecular donor-acceptor heterojunctions

This program explored a broad range of charge transfer (CT) states in organic solar cells with the goal of understanding how molecular energetics, structure, and morphology influence CT state energy and dynamics, and how this in turn influences solar cell performance. We identified new types of delocalized CT states at ordered molecular heterojunctions, determined the factors that dictate CT state energetic disorder in bulk heterojunctions, determined that hot CT state dissociation is negligible for most systems, that the occupation of CT states is generally non-thermal in disordered heterojunctions, and that quasi-equilibrium generally does not hold in organic solar cells. These findings allowed us to demonstrate the lowest loss in potential of any organic solar cell to date and provide valuable guidance for designing higher efficiency organic solar cells in the future.

14 SOLAR ENERGY↗
DOE OSTI2020

State Strategies for Valuing Distributed Energy Resources in Cost-Effective Locations

The deployment of Distributed Energy Resources (DERs), small-scale electricity generation sources or controllable loads connected to the distribution system or a facility served by the distribution system, can have wide-ranging and positive impacts for the electricity grid. Interconnecting a DER in a high-value location on the grid can unlock benefits beyond those that accrue to the off-taker or asset owner. When DERs are deployed optimally, not only can the individual consumer benefit, but the local utility, the electricity system, and other ratepayers can benefit as well. By engaging in locational DER planning, states can help protect their communities and ratepayers and can help ensure the reliability and resilience of the electricity system. This report explores states' role in better integrating locational value into DER siting and development. It first outlines some of the benefits that can be achieved through the deployment of DERs in high-value locations. It then looks at state policy and regulatory roles and the tools states can use to influence the location of DER development. The report next examines the challenges of locational DER planning, with a particular focus on the challenges that states face in influencing the location of DER development. It highlights three case studies from states that engaged in locational DER planning through the Multistate Initiative to Develop Solar in Locations that Provide Benefits to the Grid and then presents several lessons learned from these efforts. The final section of this report summarizes some recent publications related to locational value of DERs in the form of an abbreviated literature review.

14 SOLAR ENERGY↗
DOE OSTI2026

Examples of State and Utility Actions on Proactive Planning and Investments

As states across the U.S. confront rising electricity demand, clean energy deployment, grid modernization imperatives, and the integration of large new loads, some regulators and utilities are shifting away from reactive, “just-in-time” investment approaches toward more proactive planning and investment frameworks. This report compiles examples of jurisdictional and utility actions that reshape planning processes, cost recovery mechanisms, and performance oversight to anticipate—rather than simply respond to—future grid needs. Several themes emerge from state actions examined in this report. First, legislatures and commissions are increasingly directing utilities to proactively upgrade their distribution and transmission systems, reflecting a shift toward a forward-looking system that aligns planning with state policy goals. Second, states are establishing long-term, iterative planning frameworks that often feature multi-year horizons, biannual or annual compliance reporting, structured opportunities for stakeholder engagement, and emphasis on collaboration among utilities, regulators, and stakeholders. Third, states are actively investigating innovative cost recovery mechanisms designed to support accelerated electrification and grid modernization, while balancing consumer advocates’ concerns regarding the ratepayer financial risks of premature investments. Fourth, performance metrics and reporting requirements are being developed to ensure transparency and accountability for proactive investments. Fifth, methodological improvements in planning—such as aligning load forecasting assumptions, incorporating sensitivities, and considering load management potential across building, vehicles, storage, and demand response—are recurring areas of stakeholder focus across jurisdictions. Overall, these developments signify a growing recognition among state regulators, utilities, and stakeholders that proactive planning—supported by clear definitions, consistent and transparent methodologies, robust performance metrics, and innovative cost recovery mechanisms—is a tool that can be used to address the scale and urgency of contemporary grid needs.

electricity market↗
DOE OSTI2021

A microfluidic study of transient flow states in permeable media using fluorescent particle image velocimetry

Velocity fields in flow in permeable media are of great importance to many subsurface processes such as geologic storage of CO 2 , oil and gas extraction, and geothermal systems. Steady-state flow is characterized by velocity fields that do not change significantly over time. The flow field transitions to a new steady state once it experiences a disturbance such as a change in flow rate or in pressure gradient. This transition is often assumed to be instantaneous, which justifies the expression of constitutive relations as functions of instantaneous phase saturations. This work examines the evolution of velocity fields in a surrogate quasi-2D permeable medium using a microfluidic device, a microscopy system, and a high-speed camera. Tracer particles are injected into the medium along with DI water. The evolution of the velocity field is examined by tracing these particles in the captured images using the standard high-density particle image velocimetry algorithm founded on cross-correlation. The results suggest that the transition between steady states for an incompressible fluid takes a finite and non-negligible amount of time that is independent of the magnitude of the change in pressure gradient. The existence of transient states and the nature of the response during these states are readily interpreted by the principle of least action where flow gradually establishes an optimal configuration such that energy dissipation is 2 minimized. The findings provide evidence against the applicability of the assumption that flowing phases relax instantaneously to their steady states and, hence, against the accuracy of the classical multiphase extension of Darcy's law.

42 ENGINEERING↗
NASA NTRS2006

Practical Application of Model-based Programming and State-based Architecture to Space Missions

A viewgraph presentation to develop models from systems engineers that accomplish mission objectives and manage the health of the system is shown. The topics include: 1) Overview; 2) Motivation; 3) Objective/Vision; 4) Approach; 5) Background: The Mission Data System; 6) Background: State-based Control Architecture System; 7) Background: State Analysis; 8) Overview of State Analysis; 9) Background: MDS Software Frameworks; 10) Background: Model-based Programming; 10) Background: Titan Model-based Executive; 11) Model-based Execution Architecture; 12) Compatibility Analysis of MDS and Titan Architectures; 13) Integrating Model-based Programming and Execution into the Architecture; 14) State Analysis and Modeling; 15) IMU Subsystem State Effects Diagram; 16) Titan Subsystem Model: IMU Health; 17) Integrating Model-based Programming and Execution into the Software IMU; 18) Testing Program; 19) Computationally Tractable State Estimation & Fault Diagnosis; 20) Diagnostic Algorithm Performance; 21) Integration and Test Issues; 22) Demonstrated Benefits; and 23) Next Steps

Mission Data System (MDS)↗
NASA NTRS2020

Solid-state Architecture Batteries for Enhanced Rechargeability and Safety (SABERS)

All-electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The most challenging of these technical barriers to overcome is developing an energy storage system capable of meeting the rigorous aerospace safety and performance criteria. The performance metrics for eVTOL craft, such as specific energy and cycle life, are at least 2 times greater than those of electric automobiles. Furthermore, safety is essential for operation of commercial electric aerovehicles. Preliminary systems level analysis studies have indicated that there are five key properties which must be optimized for successful implementation of battery systems. Those five key criteria are safety, energy density, power, packaging design and scalability. Current state-of-the-art (SOA) lithium-ion batteries meet or exceed the requirements for electric aviation in the areas of power and scalability, yet are insufficient in the key performance criteria of energy, safety and packaging design. The SABERS concept proposes a battery that meets all five key performance criteria through the development of a solid-state architecture cell design utilizing high energy density and power density sulfur-selenium cathode with a lithium metal anode. Data will be presented demonstrating high performing sulfur - selenium cathode that offers a balanced energy to power density ratio, which can be tailored to the specific application by altering the stoichiometric ratios of sulfur to selenium. This cathode is being developed by implementing NASA patented holey graphene technology as a highly conductive, ultra-lightweight electrode scaffold. Novel processing methods allow developing solid-state electrolyte that is a safe, non-flammable replacement to the highly flammable liquid organic electrolytes currently used in SOA lithium-ion batteries. The all solid-state lithium-sulfur-selenium cell design enables the implementation of a bipolar stack configuration, which has the advantages of reducing overall cell weight, reducing the amount of interfaced connections for the cell, and minimizing cooling requirements for the battery. In particular, the solid-state design allows for a serial stacking configuration to enable dense packaging of the cells within the bipolar stack. Lastly, optimization of battery components occurs through a robust and rigorous combination of various computational modeling techniques covering multiple length scales. The expected result will be a solid-state battery with operational temperatures from 0 °C to 150 °C which provides the required energy density, discharge rate, and inherent safety to meet strict aerospace performance criteria.

solid state batteries↗
NASA NTRSDate not supplied

Empirical State Error Covariance Matrix for Batch Estimation

State estimation techniques effectively provide mean state estimates. However, the theoretical state error covariance matrices provided as part of these techniques often suffer from a lack of confidence in their abilities to describe the true uncertainty in the estimated states. By a reinterpretation of the equations involved in the weighted least squares algorithm, it is possible to directly arrive at an empirical state error covariance matrix. This proposed empirical state error covariance matrix will contain the effect of all error sources, known or unknown. Results are presented for a simple, two observer, measurement error only problem.

Estimation↗
NASA NTRS2019

Alternative Vegetation States in Tropical Forests and Savannas: The Search for Consistent Signals in Diverse Remote Sensing Data

Globally, the spatial distribution of vegetation is governed primarily by climatological factors (rainfall and temperature, seasonality, and inter-annual variability). The local distribution of vegetation, however, depends on local edaphic conditions (soils and topography) and disturbances (fire, herbivory, and anthropogenic activities). Abrupt spatial or temporal changes in vegetation distribution can occur if there are positive (i.e., amplifying) feedbacks favoring certain vegetation states under otherwise similar climatic and edaphic conditions. Previous studies in the tropical savannas of Africa and other continents using the MODerate Resolution Imaging Spectroradiometer (MODIS) vegetation continuous fields (VCF) satellite data product have focused on discontinuities in the distribution of tree cover at different rainfall levels, with bimodal distributions (e.g., concentrations of high and low tree cover) interpreted as alternative vegetation states. Such observed bimodalities over large spatial extents may not be evidence for alternate states, as they may include regions that have different edaphic conditions and disturbance histories. In this study, we conduct a systematic multi-scale analysis of diverse MODIS data streams to quantify the presence and spatial consistency of alternative vegetation states in Sub-Saharan Africa. The analysis is based on the premise that major discontinuities in vegetation structure should also manifest as consistent spatial patterns in a range of remote sensing data streams, including, for example, albedo and land surface temperature (LST). Our results confirm previous observations of bimodal and multimodal distributions of estimated tree cover in the MODIS VCF. However, strong disagreements in the location of multimodality between VCF and other data streams were observed at 1 km scale. Results suggest that the observed distribution of VCF over vast spatial extents are multimodal, not because of local-scale feedbacks and emergent bifurcations (the definition of alternative states), but likely because of other factors including regional scale differences in woody dynamics associated with edaphic, disturbance, and/or anthropogenic processes. These results suggest the need for more in-depth consideration of bifurcation mechanisms and thus the likely spatial and temporal scales at which alternative states driven by different positive feedback processes should manifest.

Savanna↗
DOE OSTI2025

A General and Modular Approach to Solid-State Integration of Zero-Dimensional Quantum Systems

Here, we present an all-electrical readout mechanism for quasi-0D quantum states (0D-QS), such as point defects, adatoms, and molecules, that is modular and general, providing an approach that is amenable to scaling and integration with other solid-state quantum technologies. Our approach relies on the creation of high-quality tunnel junctions via the mechanical exfoliation and stacking of multilayer graphene (MLG) and hexagonal boron nitride (hBN) to encapsulate the target system in an MLG/hBN/0D-QS/hBN/MLG heterostructure. This structure allows for all-electronic spectroscopy and readout of candidate systems through a combination of coulomb and spin-blockade. As a proof of principle, we demonstrate electronic tunneling spectroscopy of point defects in hBN and the molecular qubit vanadyl phthalocyanine. Our approach demonstrates a new pathway for the incorporation of molecules and atomic defects into solid-state quantum devices and circuits along with a readout scheme that does not rely on highly constrained optical processes for photonic readout.

defects in hexagonal boron nitride↗
DOE OSTI2026

Structure of high-lying excited states in 47 Ca with ℓ ≥ 3 populated in fast-beam 𝛾-ray-tagged one-neutron pickup reactions

Located just one neutron removed from doubly magic, stable 48 Ca, the adjacent isotope 47 Ca has been studied extensively with neutron-removing transfer reactions and interpreted within a shell-model picture. Neutron-adding transfer reactions onto the stable 46 Ca, however, have not been performed in nearly 60 years and never with the aid of high-resolution 𝛾-ray spectroscopy. Here, we report on the 12 C⁡( 46 , Ca 47 Ca+𝛾)⁢𝑋 one-neutron pickup reaction from 12 C onto 46 Ca at more than 50 MeV/nucleon, a regime of orbital angular momentum mismatch that selectively populates 47 Ca final states based on ℓ ≥ 3 neutron configurations. Newly observed excited states and 𝛾-ray transitions are discussed in comparison to 𝑓⁡𝑝 shell-model calculations in a variety of configuration spaces. Furthermore, it is shown that the nature of the observed spectrum of final states can be well interpreted, albeit with a significant fragmentation of the 𝜈⁢0⁢𝑓 5/2 strength observed in the measurement that is not borne out in the structure calculations.

39 ≤ A ≤ 58↗
DOE OSTI2025

Lithography-Defined Semiconductor Moirés with Anomalous In-Gap Quantum Hall States

Quantum materials and phenomena have attracted great interest for their potential applications in next-generation microelectronics and quantum-information technologies. In one especially interesting class of quantum materials, moiré superlattices (MSLs) formed by twisted bilayers of 2D materials, a wide range of novel phenomena are observed. However, there exist daunting challenges such as reproducibility and scalability of utilizing 2D MSLs for microelectronics and quantum technologies due to their exfoliate-tear-stack method. Here, we propose lithography-defined semiconductor MSLs, in which three fundamental parameters electron−electron interaction, spin−orbit coupling, and band topology are designable. We experimentally investigate quantum-transport properties in a moiré specimen made in an InAs quantum well. Strong anomalous in-gap states are observed within the same integer quantum Hall state. Our work opens up new horizons for studying 2D quantum-materials phenomena in semiconductors featuring superior industry-level quality and state-of-the-art technologies, and they may potentially enable new quantum-information and microelectronics technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tetracene Functionalized Si(111) Achieves Enhanced Solar-to-Chemical Energy Conversion via Molecular Acceptor States

The properties of semiconductor|liquid interfaces play a critical role in determining the efficiency of solar-to-hydrogen (STH) conversion. Here, we investigate how molecular functionalization of Si(111) and Si(111)|TiO 2 surfaces impacts photoelectrochemical (PEC) hydrogen production efficiency. We find that functionalization of ∼3% of the atop sites of Si(111) with either 9-anthracene (Anth) or 5-tetracene (Tet), with the remaining sites passivated by methyl groups, provides substrates with high electronic quality and low surface oxide densities, as determined by X-ray photoelectron spectroscopy (XPS) measurements. Surface photovoltage (SPV) spectroscopy shows that surfaces modified with Anth or Tet exhibit an increased photovoltage, with Tet-functionalized surfaces yielding an additional 192 meV relative to methyl-terminated Si(111), indicating improved charge separation for Si-Tet. Further improvement in onset potential was achieved by replacing a nitrogen-containing TiO 2 atomic layer deposition (ALD) precursor (TDMAT) with a precursor lacking nitrogen (TTIP), which eliminates the parasitic defect band in the TiO 2 overlayer (p-Si(111)-Tet|TTIP-TiO 2 |Pt: V OC = +0.283 ± 0.041 V vs RHE). Density functional theory (DFT) analysis demonstrates that compared with Anth-modified Si(111), the Tet-modified surface exhibits more hybridized Si(111)-Tet states closer to the silicon band edges. Mercury contact current–voltage (I–V, dark) measurements quantified the relative interfacial density of states of Si-Tet, Si-Anth and Si-Me surfaces─revealing that the interfacial state density was highest for Si-Tet. This suggests that such hybridized interfaces serve to capture better photoexcited charge, which enables facile electron transfer to molecular acceptors in solution. Altogether, the data indicate that beneficial hybrid molecular LUMO surface states interacting with the Si conduction band edge results in improved hydrogen evolution (HER) performance for p-Si devices.

Group theory↗
DOE OSTI2025

Gaussian-process generative model for the QCD equation of state

We develop a generative model for the nuclear matter equation of state at zero net baryon density using the Gaussian process regression method. We impose first-principles theoretical constraints from lattice quantum chromodynamics and hadron resonance gas at high- and low-temperature regions, respectively. By allowing the trained Gaussian process regression model to vary freely near the phase transition region, we generate random smooth crossover equations of state with different speeds of sound that do not rely on specific parametrizations. Here, we explore a collection of experimental observable dependencies on the generated equations of state, which paves the groundwork for future Bayesian inference studies to use experimental measurements from relativistic heavy-ion collisions to constrain the nuclear matter equation of state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Electromagnon Signatures of a Metastable Multiferroic State

Magnetoelectric multiferroic materials, particularly type-II multiferroics where ferroelectric polarizations arise from magnetic order, offer significant potential for the simultaneous control of magnetic and electric properties. However, it remains an open question as to how the multiferroic ground states are stabilized on the free-energy landscape in the presence of intricate competition between the magnetoelectric coupling and thermal fluctuations. Here, in this work, by using terahertz time-domain spectroscopy in combination with an applied magnetic field, photoexcitation, and single-shot detection, we reveal the spectroscopic signatures of a magnetic-field-induced metastable multiferroic state in a hexaferrite. This state remains robust until thermal influences cause the sample to revert to the original paraelectric state. Our findings shed light on the emergence of metastable multiferroicity and its interplay with thermal dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Isomeric states in the neutron-rich 𝑁 = 108 nuclei 178 Yb and 179 Lu

A multinucleon transfer reaction with a 136 Xe beam and a gold-backed 176 Yb target populated isomers in N = 108 178 Yb and 179 Lu. The single decay from the t 1/2 = 203(16) ns isomer in 178 Yb to the I π = 4 + level in the ground-state band suggests a I π = 4 − assignment, and multiquasiparticle calculations associate this state with the K π = 4 − , ν 2 (1/2[510], 9/2[624]) configuration. At least two isomers were observed in 179 Lu. One likely couples the K π = 4 − configuration found in 178 Yb to the 9/2[514] quasiproton orbital to form a K π = 17/2 + level (t 1/2 = 1.0(4) µs) which primarily decays into the rotational band based on the 9/2[514] state. A second isomer was observed to decay into this same band, but at higher energy and spin. Based on its feeding pattern, its similarity to an isomer found in 181 Ta, and a multiquasiparticle calculation, it is proposed to correspond to a K π = 29/2 − state based on the π9/2[514]ν 2 (9/2[624], 11/2[615]) configuration. As a result, an analysis of the reduced hindrance factors for negative-parity, two-quasineutron isomers in the rare-earth region is presented as well.

150 ≤ A ≤ 189↗
DOE OSTI2025

The Two Arctic Wintertime Boundary Layer States: Disentangling the Role of Cloud and Wind Regimes in Reanalysis and Observations During MOSAiC

The wintertime central Arctic atmosphere comprises a radiatively clear and a radiatively opaque state, which are linked to synoptic forcing and mixed-phase clouds. Weather and climate models often lack process representations surrounding these states, but prior work mostly treated the problem as an aggregate of synoptic conditions, resulting in partially overlapping biases. Here, we disaggregate the Arctic states and confront ERA5 reanalysis with observations from the MOSAiC campaign over the central Arctic sea ice during winter 2019/2020. Low-level winds and liquid water path (LWP) are combined to derive different synoptic classes. Results show that the clear state is primarily formed by weak/moderate winds and the absence of liquid-bearing clouds, while strong winds and enhanced LWP primarily form the radiatively opaque state. ERA5 struggles to reproduce these basic statistics, shows too weak sensitivity of thermal radiation to synoptic forcing, and overestimates thermal radiation for similar LWP amounts. The latter is caused by a warm bias, which has a pronounced inversion structure and is largest in clear and calm conditions. Under strong synoptic forcing, the warm bias is constant with height and discrepancies in mixed-phase cloud altitude appear. Separating synoptic conditions is regarded as useful for process-oriented evaluation of the Arctic troposphere in models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Signature of 0 + excited state and shape coexistence in 94 Kr through 93 Kr(d,p) 94 Kr reaction

A measurement of the excitation spectrum of 94 Kr via one-neutron transfer to the ground state of 93 Kr using the 93 Kr(d,p) 94 Kr reaction at 8A MeV, observing the outgoing protons, performed with the IRIS facility at TRIUMF is reported. Two states in 94 Kr, at 1.50±0.14 MeV and 2.20±0.14 MeV, were observed. An adiabatic-wave approximation analysis of the differential cross sections leads us to identify the lower energy state as being populated with neutron transfer to the 3 s1/2 orbital. This leads to the first observation of the lowest 0 + excited state in 94 Kr, hence signaling shape co-existence. Theoretical calculations performed within the in-medium similarity renormalization group framework are presented that also show the existence of a low-energy 0 + state, aligning qualitatively with the observation.

74 ATOMIC AND MOLECULAR PHYSICS↗