Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Some clues about the interphase reaction between ZnO and MnO{sub 2} oxides

Raman spectroscopy is used to evidence both the nature of the interphase reaction between ZnO and MnO{sub 2} particles and its kinetic evolution. Zn cations migrate from the ZnO grains during oxygen vacancies formation process and diffuse into the MnO{sub 2} particles leading to an interphase region with an intermediate valence Mn{sup +3}-O-Mn{sup +4}. Large amounts of desorbed Zn cations promote the formation of ZnMn{sub 2}O{sub 4} structure, in addition to the intermediate valence state. The system evolves towards complete formation of the spinel phase at higher thermal treatment times. The reactivity of the ZnO plays an important role in the formation of this interphase. Low-reactivity ZnO powder, in which the oxygen vacancies are previously produced, shows a stabilization of the intermediate valence state with very limited formation of the spinel phase. A clear correlation between the amount of the intermediate state interphase and the magnetic properties has been established. - Graphical abstract: Recently new room temperature interphase magnetism has been reported to appear in ZnO-MnO{sub 2} system. Raman spectroscopy is used to evidence both the nature of the interphase reaction and the kinetic. The interphase evolved towards complete formation of the spinel phase. The reactivity of the ZnO plays an important role in the formation of this interphase. Finally, a clear correlation between the amount of the intermediate valence state and the interphase magnetic properties has been established.

36 MATERIALS SCIENCE↗

Cation distribution and particle size effect on Raman spectrum of CoFe{sub 2}O{sub 4}

Moessbauer and Raman spectroscopic studies were carried out on CoFe{sub 2}O{sub 4} particles synthesized with size ranging from 6 to 500 nm (bulk). Cation distribution studies were carried out on the high temperature and room temperature phases of the microcrystalline CoFe{sub 2}O{sub 4} by Moessbauer and Raman spectroscopic methods. The high temperature phase of CoFe{sub 2}O{sub 4} showed a decreased inversion parameter of 0.69 as compared to the value of the room temperature phase of 0.95, indicating that the structure gradually transforms towards a normal spinel. Corresponding Raman spectra for these two phases of CoFe{sub 2}O{sub 4} showed a change in relative peak intensity of the vibrational mode at 695 cm{sup -1}(A{sub 1g}(1)) to 624 cm{sup -1} (A{sub 1g}(2)). The relative peak intensity ratio, I{sub v} between the A{sub 1g}(1) and A{sub 1g}(2) vibrational mode was decreasing with lowering of inversion parameter of the CoFe{sub 2}O{sub 4} spinel system. A variation of laser power on the sample surface was reflected in the cation distribution in ferrite phase. Superparamagnetic, single domain CoFe{sub 2}O{sub 4} particles (6 nm) showed a 20 cm{sup -1} red shift and broadening of phonon modes when compared to the macro-crystalline CoFe{sub 2}O{sub 4} (500 nm). Variation of Raman shift with particle size was studied by considering the bond polarization model. Raman spectroscopic studies clearly indicate the variation in the cation distribution in nano-sized particles and distribution tending to a normal spinel structural configuration. -- Graphical abstract: Variation of Raman shift difference ({Delta}{omega}) with size. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal low spin-high spin equilibrium of Fe(II) in thiospinels CuFe{sub 0.5}(Sn{sub (1-x)}Ti{sub x}){sub 1.5}S{sub 4} (0{<=}x{<=}1)

A series of spinel compounds with composition CuFe{sub 0.5}(Sn{sub (1-x)}Ti{sub x}){sub 1.5}S{sub 4} (0{<=}x{<=}1) is analysed by X-ray diffraction, measurements of magnetic susceptibilities and {sup 57}Fe Moessbauer spectroscopy. All samples show a temperature-dependent equilibrium between an electronic low spin 3d(t{sub 2g}){sup 6}(e{sub g}){sup 0} and a high spin 3d(t{sub 2g}){sup 4}(e{sub g}){sup 2} state of the Fe(II) ions. The spin crossover is of the continuous type and extends over several hundred degrees in all samples. The Sn/Ti ratio influences the thermal equilibrium between the two spin states. Substitution of Sn(IV) by the smaller Ti(IV) ions leads to a more compact crystal lattice, which, in contrast to many metal-organic Fe(II) complexes, does not stabilise the low spin state, but increases the residual high spin fraction for T{yields}0 K. The role played by antiferromagnetic spin coupling in the stabilisation of the high spin state is discussed. The results are compared with model calculations treating the effect of magnetic interactions on spin state equilibria. -- Graphical Abstract: Comparison of fractions of high spin Fe(II) from Moessbauer spectra (circles) with plots of {chi}{sub m}T (dots) versus T. Discrepancies between both methods indicate anti-ferromagnetic spin coupling. Display Omitted Research highlights: {yields} Many Fe(II) complexes show thermally induced high spin-low spin crossover. {yields} Spin crossover in spinel compounds is extremely scarce. {yields} Usually, lattice contraction favours the low spin state in Fe(II) complexes. {yields} In these spinels, lattice contraction favours the high spin state. {yields} The stabilisation of the high spin state is explained by spin-spin interactions.

36 MATERIALS SCIENCE↗

Surface characterization of ZnO/ZnMn{sub 2}O{sub 4} and Cu/Mn{sub 3}O{sub 4} powders obtained by thermal degradation of heterobimetallic complexes

From the selective transformation of the heterometallic (Zn-Mn or Cu-Mn) carboxylate complexes with 2,2 Prime -bipyridyl by thermal degradation at relatively low (350 Degree-Sign C) temperature, it was possible to get either well defined spinel ZnMn{sub 2}O{sub 4} over zinc oxide or well dispersed copper particles surrounded by a manganese oxide (Mn{sub 3}O{sub 4}) in a core-shell like structure. Morphology of the powder surface was examined by scanning electron microscopy with energy dispersive X-ray microanalysis (SEM/EDX). Surface composition was determined by X-ray photoelectron spectroscopy (XPS). Specific surface of the powders by nitrogen adsorption was found to be 33{+-}0.2 and 9{+-}0.06 m{sup 2} g{sup -1} for Zn-Mn and Cu-Mn samples, respectively, which is comparable to those of commercial products. - Graphical abstract: From the selective transformation of heterometallic (Zn-Mn or Cu-Mn) carboxylate complexes, it was possible to get either well defined spinel ZnMn{sub 2}O{sub 4} over zinc oxide or well dispersed copper particles surrounded by a manganese oxide (Mn{sub 3}O{sub 4}) in a core-shell like structure. Highlights: Black-Right-Pointing-Pointer Thermal degradation of heterometallic complexes results in fine disperse particles. Black-Right-Pointing-Pointer Core-shell Cu/Mn{sub 3}O{sub 4} particles are obtained. Black-Right-Pointing-Pointer ZnMn{sub 2}O{sub 4} spinel layer covers ZnO particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transmission electron microscopy study of the MgS–Tm{sub 2}S{sub 3} system

This work presents the structural–microstructural characterization of the NaCl-derivative MgS–Tm{sub 2}S{sub 3} system, which can be formulated by the expression Mg{sub (1−x)}Tm{sub (2/3)x}□{sub (1/3)x}S (□→cation vacancy). Transmission electron microscopy observations show the transition between NaCl-type and spinel-type structures when 0 ≤x≤ 0.75. The increase of Tm content in the solid solution provokes the increase of the spinel-type phase proportion, which intergrows with the NaCl-type crystals. When x≥0.75, some phases derived from NaCl-type structure through the chemical twinning at the unit cell level crystallographic operation are observed, such as CT-MgTm{sub 2}S{sub 4} and CT-MgTm{sub 4}S{sub 7}. The existence and nature of the extended defects observed along the c direction of these structures are characterized by means of Scanning-Transmission electron microscopy high-angle dark field imaging, which allows observing the presence of quasi ordered crystals with new possible complex stoichiometries at atomic resolution. - Graphical abstract: HAADF-STEM image of a disordered CT-MgYb{sub 2}S{sub 4} crystal. The disordered twin-slab sequences are marked by arrows. - Highlights: • Structural evolution of the Mg{sub (1−x)}Tm{sub (2/3)x}□{sub (1/3)x}S system was characterized by means of TEM. • The increase in Tm content provokes the transition from NaCl to spinel-type structure up to x=0.75. • Chemical twinned phases CT-MgTm{sub 2}S{sub 4} and CT-MgTm{sub 4}S{sub 7} are observed at high Tm contents. • Extended defects in CT-crystals are characterized with atomic resolution STEM-HAADF images.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural characterization and influence of manufacturing parameters on technological properties of vitreous ceramic materials

Microstructure of vitreous ceramic samples manufactured from kaolinitic-clay and feldspars raw materials from Cameroon was investigated in the range 1150-1250 deg. C by X-ray diffraction and scanning electron microscopy and by measuring some technological properties. Moreover, the simultaneous influence of feldspars content, heating temperature and soaking time on water absorption and firing shrinkage was evaluated by adopting the response surface methodology (Doehlert matrix), using the New Efficient Methodology for Research using Optimal Design (NEMROD) software. The results show that a spinel phase, mullite, glassy phase and some amount of hematite were formed. However, the spinel phase and potassic feldspar, as compared to the sodic one, disappeared at moderate firing temperature and soaking time. Apparently, mullite developed from spinel phase, which is formed from the demixion of metakaolin. On the other hand, it is found that the effects of fluxing content and firing temperature on the measured properties were almost similar and more influent than soaking time. Antagonistic and synergetic interactions existed between the considered parameters, and their importance differed for the considered properties. By using this mathematical tool, suitable operating conditions for manufacturing vitreous bodies were determined.

36 MATERIALS SCIENCE↗

Synthesis and characterization of nanocrystalline Zn ferrites substituted with Ni

Highlights: {yields} Ni{sub x}Zn{sub 1-x}Fe{sub 2}O{sub 4} are synthesized by sol-gel auto-combustion method using tartaric acid. {yields} XRD patterns reveal spinel structure and the crystallite size is max. 40 nm. {yields} SEM images for Ni{sub 0.6}Zn{sub 0.4}Fe{sub 2}O{sub 4} confirm the nano-scale crystallite size. {yields} The highest value of samples porosity belongs to Ni{sub 0.6}Zn{sub 0.4}Fe{sub 2}O{sub 4}. {yields} The maximum value of the magnetization is 63 emu/g for Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}. -- Abstract: Nanocrystalline powders of nickel substituted zinc ferrite with general formula Ni{sub x}Zn{sub 1-x}Fe{sub 2}O{sub 4} (x = 0, 0.2, 0.4, 0.6, 0.8, 1) have been synthesized via sol-gel auto-combustion method using tartaric acid as combustion-complexing agent. Samples were sintered at 773 K and 973 K in static air atmosphere. The absence of the organic phase and the spinel formation were monitored by using Fourier transform infrared spectroscopy. The structure and crystallite size were analyzed from X-ray diffraction data revealing spinel mono-phase formation in the range of nanometric crystallite size confirmed also through scanning electron microscopy. Mean size of crystallites lay in the range 20-40 nm. The influence of nickel content on the microstructure was investigated considering the crystallite size, distance between adjacent crystal planes, lattice parameter and porosity. The variation of magnetic properties of the samples was studied by using vibrating samples magnetometer and discussed considering the proposed cation distribution, relative bond angles and canting angles. The highest maximum value of the magnetization (63 emu/g) was found for Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deposition of nanostructured photocatalytic zinc ferrite films using solution precursor plasma spraying

Highlights: Black-Right-Pointing-Pointer Highly economic solution precursor route capable of producing films/coating even for mass scale production. Black-Right-Pointing-Pointer Pure spinel phase ZnFe{sub 2}O{sub 4} porous, immobilized films deposited in single step. Black-Right-Pointing-Pointer Parameter optimization yields access to nanostructuring in SPPS method. Black-Right-Pointing-Pointer The ecofriendly immobilized ferrite films were active under solar radiation. Black-Right-Pointing-Pointer Such magnetic system display advantage w.r.t. recyclability after photocatalyst extraction. -- Abstract: Deposition of pure spinel phase, photocatalytic zinc ferrite films on SS-304 substrates by solution precursor plasma spraying (SPPS) has been demonstrated for the first time. Deposition parameters such as precursor solution pH, concentration, film thickness, plasma power and gun-substrate distance were found to control physico-chemical properties of the film, with respect to their crystallinity, phase purity, and morphology. Alkaline precursor conditions (7 < pH {<=} 10) were found to favor oxide film formation. The nanostructured films produced under optimized conditions, with 500 mM solution at pH {approx} 8.0, yielded pure cubic phase ZnFe{sub 2}O{sub 4} film. Very high/low precursor concentrations yielded mixed phase, less adherent, and highly inhomogeneous thin films. Desired spinel phase was achieved in as-deposited condition under appropriately controlled spray conditions and exhibited a band gap of {approx}1.9 eV. The highly porous nature of the films favored its photocatalytic performance as indicated by methylene blue de-coloration under solar radiation. These immobilized films display good potential for visible light photocatalytic applications.

36 MATERIALS SCIENCE↗

Template-free hydrothermal derived cobalt oxide nanopowders: Synthesis, characterization, and removal of organic dyes

Graphical abstract: XRD patterns of the products obtained by hydrothermal treatment at 160 °C for 24 h, and at different [Co{sup 2+}]/[CO{sub 3}{sup 2−}] ratios: (a) 1:6, (b) 1:3, (c) 1:1.5, (d) 1:1, (e) 1:0.5. Highlights: ► Spinel cobalt oxide nanoparticles with different morphologies were prepared by hydrothermal approach. ► The optical characteristics of the as-prepared cobalt oxide revealed the presence of two band gaps. ► Adsorption of methylene blue dye on Co{sub 3}O{sub 4} was investigated and the percent uptake was found to be >99% in 24 h. -- Abstract: Pure spinel cobalt oxide nanoparticles were prepared through hydrothermal approach using different counter ions. First, the pure and uniform cobalt carbonate (with particle size of 21.8–29.8 nm) were prepared in high yield (94%) in an autoclave in absence unfriendly organic surfactants or solvents by adjusting different experimental parameters such as: pH, reaction time, temperature, counter ions, and (Co{sup 2+}:CO{sub 3}{sup 2−}) molar ratios. Thence, the spinel Co{sub 3}O{sub 4} (with mean particle size of 30.5–47.35 nm) was produced by thermal decomposition of cobalt carbonate in air at 500 °C for 3 h. The products were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FTIR), transmission electron microscope (TEM), scanning electron microscope (SEM), and thermal analysis (TA). Also, the optical characteristics of the as-prepared Co{sub 3}O{sub 4} nanoparticles revealed the presence of two band gaps (1.45–1.47, and 1.83–1.93 eV). Additionally, adsorption of methylene blue dye on Co{sub 3}O{sub 4} nanoparticles was investigated and the uptake% was found to be >99% in 24 h.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intrinsic magnetic, structural and resistivity properties of ferromagnetic Mn{sub 0.5}Zn{sub 0.5}Al{sub x}Fe{sub 2−x}O{sub 4} nanoparticles

Highlights: ► Al{sup 3+} ion substituted Mn–Zn ferrite nanoparticles. ► Single phase cubic spinel structure changes with Al{sup 3+} substitution. ► Magnetization and coercivity decreased with increasing Al{sup 3+}. ► Resistivity increased with Al{sup 3+} substitution. - Abstract: In this work the nano-structural, magnetic and resistivity properties of Al{sup 3+} substituted Mn–Zn ferrites powders were investigated. Mn{sub 0.5}Zn{sub 0.5}Al{sub x}Fe{sub 2−x}O{sub 4} powders, where x = 0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 were obtained by the sol–gel auto-combustion method. X-ray diffraction data indicate that, after substitution, all the samples consisted of the main spinel phase in combination with a small amount of a foreign Al{sub 2}O{sub 3} phase. The addition of Al{sup 3+} resulted in a reduction of particle size and density of the prepared samples. Cation distribution in the present study was estimated by using X-ray diffraction data. The tetrahedral site radii initially increased with Al{sup 3+} content while the octahedral site radii decreased with the Al{sup 3+} substitution. FTIR spectra show two strong absorption bands at 529–548 cm{sup −1} and 445–452 cm{sup −1} which are the typical bands for the cubic spinel crystal structure. The magnetic properties were measured by employing a vibrating sample magnetometer. It was observed that the saturation magnetization, coercivity and anisotropy field decreased with the increase of Al{sup 3+} substitution. Introduction of Al{sup 3+} ions into the Mn–Zn ferrite increased the values of the resistivity, especially in the lower temperature range.

36 MATERIALS SCIENCE↗

Cation distribution in Ni–Cu–Zn nanoferrites from {sup 57}Fe in-field Mössbauer spectra

Highlights: • Occupancy of copper ions at about 20% towards tetrahedral sites. • Distribution is proposed on the basis of % of Fe ions at both A and B sites. • Distribution is checked by estimating the theoretical lattice constant values. - Abstract: The nanoparticles of Ni{sub 1−x}Cu{sub x}Zn{sub 0.35}Fe{sub 2}O{sub 4} were synthesized by sol–gel method using polyvinyl alcohol as a chelating agent. X-ray diffraction patterns of all the samples confirmed the single phase spinel structure. The site occupancy of copper in the nanosized nickel–zinc ferrite spinels was investigated with the help of in-field Mössbauer spectroscopy. Cation distribution for the whole series of compositions was proposed by considering the amounts of iron ions present at both tetrahedral and octahedral interstitial sites in the spinel lattice. Confirmation of the proposed distributions was done by estimating quantitatively the lattice parameters for these compositions and comparing their values with those of the experimentally observed ones.

36 MATERIALS SCIENCE↗

Corrosion behavior of magnetic ferrite coating prepared by plasma spraying

Graphical abstract: The saturation magnetization (M{sub s}) of the ferrite coating is 34.417 emu/g while the M{sub s} value of the ferrite powder is 71.916 emu/g. It can be seen that plasma spray process causes deterioration of the room temperature soft magnetic properties. - Highlights: • Spinel ferrite coatings have been prepared by plasma spraying. • The coating consists of nanocrystalline grains. • The saturation magnetization of the ferrite coating is 34.417 emu/g. • Corrosion behavior of the ferrite coating was examined in NaCl solution. - Abstract: In this study, spray dried spinel ferrite powders were deposited on the surface of mild steel substrate through plasma spraying. The structure and morphological studies on the ferrite coatings were carried out using X-ray diffraction, scanning electron microscope and Raman spectroscopy. It was showed that spray dried process was an effective method to prepare thermal spraying powders. The coating showed spinel structure with a second phase of LaFeO{sub 3}. The magnetic property of the ferrite samples were measured by vibrating sample magnetometer. The saturation magnetization (M{sub s}) of the ferrite coating was 34.417 emu/g. The corrosion behavior of coating samples was examined by electrochemical impedance spectroscopy. EIS diagrams showed three corrosion processes as the coating immersed in 3.5 wt.% NaCl solution. The results suggested that plasma spraying was a promising technology for the production of magnetic ferrite coatings.

36 MATERIALS SCIENCE↗

Bimetallic oxamato complexes synthesized into mesoporous matrix as precursor to tunable nanosized oxide

Highlights: • The bimetallic oxamato complexes as single-source precursor. • We prepared into a porous silica glass tunable nanosized oxide powders. • X-ray diffraction shows the formation of CeO{sub 2}/CuO and spinel cobaltite. • The different number of IDC allows control of the nanoparticle size. - Abstract: The bimetallic complexes were employed to prepare into a porous silica glass tunable nanosized oxide powders through the single source precursor (SSP) method. These materials were prepared by first anchoring of [Cu(opba)]{sup 2−} [opba = ortho-phenylenebis(oxamato)], second by reaction in situ with second metal [Co(II) or Ce(III)] and followed by a thermal treatment. The different number of impregnation–decomposition cycles (IDC) allows control of the nanoparticle size. X-ray diffraction shows the formation of mixture CeO{sub 2}–CuO and spinel copper cobaltite. Raman spectroscopy confirmed the formation of such phases. Transmission electron microscopy images revealed that spinel cobaltite particles (8 IDC) present a mean size of about 9 nm, whereas for the CeO{sub 2}–CuO phase the particle diameters are 4 nm (2 IDC) and 8 nm (6 IDC). For CeO{sub 2}–CuO the diffuse reflectance spectroscopy indicates a consistent red shift in band gap from 3.41 to 2.87 eV with increasing of particle size due to quantum confinement effect.

36 MATERIALS SCIENCE↗

The effect of fuel to nitrates ratio on the properties of FeCr{sub 2}O{sub 4} nanopowders

Highlights: • Single phase spinel FeCr{sub 2}O{sub 4} nanopowders were formed without further heat treatment based on powder X-ray diffraction, FTIR and EDS studies. • The probable combustion mechanism with thermodynamic concepts involved in the formation of FeCr{sub 2}O{sub 4} nanopowders were discussed. • The effect of different amount of fuel to metal nitrates ratio (F/N) on the self-combusted FeCr{sub 2}O{sub 4} nanopowders was investigated. • It greatly affects the morphologies, different nanocrystallite sizes, and magnetic properties by using different combinations of F/N ratios. - Abstract: The solution combustion of spinel type FeCr{sub 2}O{sub 4} nanopowders via different ratios of fuel to stating metal nitrates was investigated. The synthesized FeCr{sub 2}O{sub 4} nanopowders were deemed to be single phase spinel type material based on powder X-ray diffraction, FTIR and EDS studies. The properties of synthesized FeCr{sub 2}O{sub 4} nanopowders such as morphology, porosity, elemental composition, crystallite size, strain and lattice deformations, magnetic moment, and coercivity were influenced by the amount of the fuel used in the combustion process. FeCr{sub 2}O{sub 4} nanopowders with different morphologies, porosities, structural, and magnetic properties could be prepared in a single procedure on a hotplate magnetic stirrer without the need for high temperature furnaces.

36 MATERIALS SCIENCE↗

Effect of Cu dopant on the structural, magnetic and electrical properties of Ni-Zn ferrites

Highlights: • Ni{sub 0.8-x}Cu{sub x}Zn{sub 0.2}Fe{sub 2}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6) Spinel ferrites synthesized through auto-combustion method and their structural and magnetic properties investigated by XRD, SEM, FTIR and VSM measurements. • Increase in crystal and particle size and decrease in saturation magnetization resulted from substitution on Ni by Cu. • Observed values of (ε) and (tanδ) of the samples show the deterministic role of density in electrical properties of spinel ferrites. - Abstract: Ni{sub 0.8-x}Cu{sub x}Zn{sub 0.2}Fe{sub 2}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6) ferrite was synthesized through auto-combustion method. (XRD) patterns confirmed the crystallization of the samples in spinel structure. FESEM showed that the size of ferrite particles are about few hundred nanometers and with increase in Cu concentration (x) in the structure there is increase in particle size. Fourier transform infrared (FTIR) spectrometry indicates that octahedral and tetrahedral sites are formed. Vibrating sample magnetometer (VSM) results proved reduction of saturation magnetization (M{sub s}) by increasing Cu content, which is explained according to the ferrimagnetic nature of these samples in which Ni is replaced by Cu at octahedral site. Real part of dielectric constant (ε) and loss tangent (tanδ) of samples were also studied in frequency range of 100–20000 Hz. Results showed an increase in ε and tanδ of the sample with x = 0.6 which is considered to be the result of higher density of this sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

4D-STEM Coupled with Unsupervised Machine Learning to Reveal at Large-Scale the Microstructural Evolution in Li- and Mn-Rich Cathodes

Li- and Mn-rich (LMR) layered oxides are known to exhibit a thin surface reconstruction layer, which grows during electrochemical cycling in a manner that depends on exposed crystallographic facets, cycling conditions, and electrolyte chemistry. Direct characterization of this layer has traditionally relied on high-resolution electron microscopy, which is inherently limited to small fields of view. Here, we employ four-dimensional scanning transmission electron microscopy (4D-STEM) combined with unsupervised machine-learning clustering to quantitatively map phase distributions over large areas and track their evolution in LMR cathodes during electrochemical aging. Our results show that the surface reconstruction layer consists predominantly of a rocksalt phase, whose thickness varies across different facets following activation cycling and becomes substantially thicker and more uniform during calendar aging. In contrast, a spinel-like phase is observed within the particle bulk. Large-area phase mapping and correlative high-resolution imaging reveal that this spinel-like phase preferentially nucleates at bulk crystallographic defects, including boundaries between 60°-rotated layered domains and associated mixed-phase regions, rather than exclusively at the particle surface. Our findings establish a mechanistic distinction between surface-driven rocksalt formation and bulk-defect-mediated spinel nucleation while demonstrating the unique capability of 4D-STEM to provide statistically robust, mesoscale insight into complex phase-evolution processes in LMR cathodes.

4D-STEM↗

Liquid ammonia chemical lithiation: an approach for high energy and high voltage Si-graphite | Li 1+ x Ni 0.5 Mn 1.5 O 4 Li-ion batteries

Chemical lithiation using lithium metal dissolved in liquid ammonia is introduced for the first time as a viable, potentially scalable method to over-lithiate cathode materials, in this case, the 5V spinel Li 1+ x Ni 0.5 Mn 1.5 O 4 . In this formula the value of x represents the amount of extra lithium inserted into the spinel. Such over-lithiated cathodes can subsequently be used to pre-lithiate high-energy anodes in a lithium-ion battery configuration during the first charge step. Lithiated 5V spinel Li 1+ x Ni 0.5 Mn 1.5 O 4 cathode materials prepared by this technique show higher first delithiation capacities, confirming the chemically inserted lithium is electrochemically active. Full cells with a Si-graphite anode and the Li 1+ x Ni 0.5 Mn 1.5 O 4 (x=0.62) cathode show a 23 % higher reversible capacity in the first cycle than LiNi 0.5 Mn 1.5 O 4 baseline cells, and improved capacity retention. The extra, chemically inserted lithium therefore sacrificially compensates for the loss of lithium at the anode allowing higher utilization of the cathode capacity in following cycles.

25 ENERGY STORAGE↗

Strain and Defect-Tailored Magnetotransport in NiCo 2 O 4 Thin Films and Freestanding Membranes

Magnetic spinel NiCo 2 O 4 is promising for developing spintronic applications due to its high magnetic Curie temperature, high spin polarization, fast spin dynamics, and strain-tunable magnetic anisotropy, while its electronic and magnetic properties depend sensitively on epitaxial strain and disorder. Here, in this study, we use epitaxial NiCo 2 O 4 thin films and freestanding NiCo 2 O 4 membranes as model systems to reveal the complex interplay of strain and defects in determining the metallicity and magnetotransport properties of the ferrimagnetic spinel. NiCo 2 O 4 on perovskite substrates and NiCo 2 O 4 membranes exhibit insulating behaviors and spin canting, in sharp contrast to the metallic NiCo 2 O 4 films on spinel substrates that possess strong perpendicular magnetic anisotropy. Anisotropic magnetoresistance studies provide critical information about disorder-induced spin scattering and strain-induced tetragonal magnetocrystalline anisotropy, which is corroborated by comprehensive electron microscopy characterizations. Our study presents a promising venue for designing flexible magnetic memory, sensor, and spintronic applications.

36 MATERIALS SCIENCE↗