Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Effect of microwave treatment on the luminescence properties of CdS and CdTe:Cl Single Crystals

The effect of microwave radiation on the luminescence properties of CdS and CdTe:Cl single crystals is studied. It is established that the exposure of these semiconductors to short-term (≤30 s) microwave radiation substantially modifies their impurity and defect structure. The mechanisms of transformation of the defect subsystem of II–VI single crystals upon microwave treatment are discussed. It is shown that the experimentally observed changes are defined by the nonthermal effects of microwave radiation at a power density of 7.5 W cm{sup –2}; at 90 W cm{sup –2}, nonthermal effects are prevailing.

36 MATERIALS SCIENCE↗

Optical and Electrical Properties of Sn-Doped Zinc Oxide Single Crystals

Here, Sn dopant in ZnO may significantly improve the n-type conductivity of ZnO through a characteristic double effect. However, studies on bulk Sn-doped ZnO are rare, and the effect of Sn doping on the optoelectronic properties of bulk ZnO is not well understood. In this work, the effect of Sn doping on the optical and electrical properties of ZnO bulk single crystals was investigated through optical absorption spectroscopy, Hall-effect measurements, and thermoluminescence (TL) spectroscopy. Undoped and Sn-doped ZnO single crystals were grown by chemical vapor transport method and characterized by x-ray diffraction analysis. The Sn doping level in the crystals was evaluated by inductively coupled plasma mass spectroscopy measurements. Hall-effect measurements revealed an increase in conductivity and carrier concentration with increasing Sn doping, while TL measurements identified a few donor species in the crystals with donor ionization energy ranging from 35 meV to 118 meV. Increasing Sn doping was also associated with a color change of single crystals from colorless to dark blue.

36 MATERIALS SCIENCE↗

Constitutive Modeling of Superalloy Single Crystals and Directionally Solidified Materials

A unified viscoplastic constitutive relation based on crystallographic slip theory was developed for the deformation analysis of nickel base face centered cubic superalloy single crystals at elevated temperature. The single crystal theory is embedded in a self consistent method to derive a constitutive relation for a directionally solidified material comprised of a polycrystalline aggregate of columnar cylindrical grains. One of the crystallographic axes of the cylindrical crystals points in the columnar direction while the remaining crystallographic axes are oriented at random in the basal plane perpendicular to the columnar direction. These constitutive formulations are coded in FORTRAN for use in nonlinear finite element and boundary element programs.

Walker, K. P.↗

High strain-rate strength response of single crystal tantalum through in-situ hole closure imaging experiments

The properties of crystalline materials often depend on directionality and operating conditions. Specifically, the strength of materials can depend anisotropically on crystal direction and the loading condition. To probe these effects, a preliminary series of high strain-rate (> 105/s) strength plate-impact hole closure experiments were performed on high purity single crystal Tantalum cubes. The orientation of the single crystals with respect to impact/loading were varied to provide data to inform crystal plasticity modeling efforts. The experiments consist of in-situ high-resolution X-ray radiographic imaging of the hole collapse under dynamic compression conditions to infer the material strength via its resistance to closure at increasing levels of plastic strain. The experiments are compared against hydrocode simulation predictions. Here, a comparison with simple elastic perfectly plastic strength model predictions is presented to elucidate the response of the different crystal orientations at high strain-rate and large plastic strains.

36 MATERIALS SCIENCE↗

Redetermination of the crystal structure of tetralithium octafluoridozirconate(IV), Li 4 ZrF 8 , from single-crystal X-ray data

Presented herein is the crystal-structure redetermination of Li 4 ZrF 8 from singlecrystal X-ray data. Alkali zirconium fluorides are important in nuclear-relevant technologies, and zirconium is commonly employed as an analogue for tetravalent f-block elements. The previous structure report of this species is based on powder X-ray data [Dugat et al. (1995). J. Solid State Chem. 120, 187– 196] but there has never been a refined structure model from single-crystal data. The octafluoridozirconate moieties are held together by electrostatic attraction to lithium ions without sharing of fluoride sites between zirconium(IV) ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu-Al-Ni Shape Memory Single Crystal Wires with High Transformation Temperature

CN-250X is a new material with higher performance than Nickel-Titanium Shape Memory Alloy (SMA). For space mechanisms, the main disadvantage of Nickel-Titanium Shape Memory Alloy is the limited transformation temperature. The new CN-250X Nimesis alloy is a Cu-Al-Ni single crystal wire available in large quantity because of a new industrial process. The triggering of actuators made with this Cu-Al-Ni single crystal wire can range from ambient temperature to 200 C in cycling and even to 250 C in one-shot mode. Another advantage of CN-250X is a better shape recovery (8 to 10%) than Ni-Ti (6 to 7%). Nimesis is the first company able to produce this type of material with its new special industrial process. A characterization study is presented in this work, including the two main solicitation modes for this material: tensile and torsion. Different tests measure the shape recovery of Cu-Al-Ni single crystals wires during heating from room temperature to a temperature higher than temperature of end of martensitic transformation.

Hautcoeur, Alain↗

Single crystal studies on Co-containing {tau}-borides Co{sub 23-x}M{sub x}B{sub 6} (M=Al, Ga, Sn, Ti, V, Ir) and the boron-rich {tau}-boride Co{sub 12.3}Ir{sub 8.9}B{sub 10.5}

Single crystals of the cubic {tau}-Borides Co{sub 23-x}M{sub x}B{sub 6} (M=Al, Ga, Sn) were synthesised from the elements at temperatures between 1200 and 1500 deg. C. According to the structure refinements one (Ga, Sn: 8c) or two (Al: 4a and 8c) of the four independent metal sites show a mixed occupation Co/M resulting in the compositions Co{sub 20.9}Al{sub 2.1}B{sub 6}, Co{sub 21.9}Ga{sub 1.1}B{sub 6}, and Co{sub 21.4}Sn{sub 1.6}B{sub 6}, respectively. Melts with Indium gave access to Co{sub 23}B{sub 6} as the first binary {tau}-boride (Fm3-barm,a=10.4618(13) A, 104 refl., 14 param., R{sub 1}(F)=0.0132, wR{sub 2}(F{sup 2})=0.0210). With M=Ir mixed occupations occur for all sites and the boron content varies. The composition for the boron-poor single crystal was Co{sub 16.2}Ir{sub 6.8}B{sub 6}. A higher Ir-content enables the uptake of additional boron resulting in a composition Co{sub 12.3}Ir{sub 8.9}B{sub 10.5}. This can be explained be the substitution of metal atoms on the 8c-site by B{sub 4}-tetrahedra. A boron-rich phase was observed for the first time for a {tau}-boride of cobalt. All compositions were confirmed by EDX measurements. - Graphical Abstract: Single crystal investigations on {tau}-borides Co/M/B with M = Al, Ga, In, Sn, V, Ti, Ir explained the substitution processes. Furthermore the yielded the first binary boride, Co{sub 23}B{sub 6}, and a boron-rich Co{sub 12.3}Ir{sub 8.9}B{sub 10.5} containing B{sub 4}-tetrahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of (FeIn{sub 2}S{sub 4}){sub 1-x}(In{sub 2}S{sub 3}){sub x} alloy single crystals

(FeIn{sub 2}S{sub 4}){sub 1-x}(In{sub 2}S{sub 3}){sub x} alloy single crystals are grown by oriented crystallization in the entire range of component concentrations. For the single crystals, studies of the magnetic properties are carried out in the temperature range 4-300 K and the magnetic-field range 0-14 T. It is established that almost all of the alloys are paramagnetic materials at temperatures down to the lowest achievable temperatures ({approx}4 K). It is shown that the ground magnetic phase state of the alloys is the spin-glass state with the freezing temperature steadily increasing with increasing Fe{sup 2+} cation content. The most probable causes and mechanism of formation of the magnetic state of the (FeIn{sub 2}S{sub 4}){sub 1-x}(In{sub 2}S{sub 3}){sub x} crystals are discussed.

36 MATERIALS SCIENCE↗

Single crystal neutron and magnetic measurements of Rb 2 Mn 3 (VO 4 ) 2 CO 3 and K 2 Co 3 (VO 4 ) 2 CO 3 with mixed honeycomb and triangular magnetic lattices

Two new alkali vanadate carbonates with divalent transition metals have been synthesized as large single crystals via a high-temperature (600 °C) hydrothermal technique. Compound I, Rb 2 Mn 3 (VO 4 ) 2 CO 3 , crystallizes in the trigonal crystal system in the space group P[3 with combining macron]1c, and compound II, K 2 Co 3 (VO 4 ) 2 CO 3 , crystallizes in the hexagonal space group P6 3 /m. Both structures contain honeycomb layers and triangular lattices made from edge-sharing MO 6 octahedra and MO 5 trigonal bipyramids, respectively. The honeycomb and triangular layers are connected along the c-axis through tetrahedral [VO 4 ] groups. The MO 5 units are connected with each other by carbonate groups in the ab-plane by forming a triangular magnetic lattice. The difference in space groups between I and II was also investigated with Density Functional Theory (DFT) calculations. Single crystal magnetic characterization of I indicates three magnetic transitions at 77 K, 2.3 K, and 1.5 K. The corresponding magnetic structures for each magnetic transition of I were determined using single crystal neutron diffraction. At 77 K the compound orders in the MnO 6 -honeycomb layer in a Néel-type antiferromagnetic orientation while the MnO 5 triangular lattice ordered below 2.3 K in a colinear ‘up–up–down’ fashion, followed by a planar ‘Y’ type magnetic structure. K 2 Co 3 (VO 4 ) 2 CO 3 (II) exhibits a canted antiferromagnetic ordering below T N = 8 K. Here, the Curie–Weiss fit (200–350 K) gives a Curie–Weiss temperature of –42 K suggesting a dominant antiferromagnetic coupling in the Co 2+ magnetic sublattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of High Temperature/Low Stress Creep of Ni-Based Superalloy Single Crystals

Cast nickel-based superalloys are used for blades in land-based, energy conversion and powerplant applications, as well as in aircraft gas turbines operating at temperatures up to 1100 C, where creep is one of the life-limiting factors. Creep of superalloy single crystals has been extensively studied over the last several decades. Surprisingly, only recently has work focused specifically on the dislocation mechanisms that govern high temperature and low stress creep. Nevertheless, the perpetual goal of better engine efficiency demands that the creep mechanisms operative in this regime be fully understood in order to develop alloys and microstructures with improved high temperature capability. At present, the micro-mechanisms controlling creep before and after rafting (the microstructure evolution typical of high temperature creep) has occurred have yet to be identified and modeled, particularly for [001] oriented single crystals. This crystal orientation is most interesting technologically since it exhibits the highest creep strength. The major goal of the program entitled ''Mechanisms of High Temperature/Low Stress Creep of Ni-Based Superalloy Single Crystals'' (DOE Grant DE-FG02-04ER46137) has been to elucidate these creep mechanisms in cast nickel-based superalloys. We have utilized a combination of detailed microstructure and dislocation substructure analysis combined with the development of a novel phase-field model for microstructure evolution.

36 MATERIALS SCIENCE↗

Methods of growing single crystals using solid-solid transformation of a glass

The present invention includes methods of promoting single crystal growth via solid-solid transformation of an appropriate glass, while avoiding the gaseous or liquid phase. In certain embodiments, in the all-solid-state glass-to-crystal transformation of the invention, extraneous nucleation is avoided relative to crystal growth via spatially localized laser heating and optional inclusion of a suitable glass former in the composition. The ability to fabricate patterned single-crystal architecture on a glass surface was demonstrated, providing a new class of micro-structured substrate for low cost epitaxial growth and active planar devices, for example.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detailed surface analysis of incremental Centrifugal Barrel Polishing (CBP) and EP of single-crystal niobium samples.

Detailed surface analysis of incremental Centrifugal Barrel Polishing (CBP) and EP of single-crystal niobium samples. Ari Palczewski, Hui Tian, Olga Trofimova, Charles Reece Jefferson Lab, Newport News, VA 23606 We performed Centrifugal Barrel Polishing (CBP) on single crystal niobium samples housed in a stainless steel sample holder following a polishing recipe recently developed at FNAL [1]. We were able to obtain a mirror-like finish after the final stage of tumbling, although some defects and imbedded particles remain. Our presentation will discuss the initial results from the coupon study, including qualitative and quantitative analysis of the surface characteristics from each step in the CBP process, followed by HPR and well controlled incremental EP. These will include surface roughness, size and character of contaminants, surface crystal structure, and overall finish. We will discuss how the surface characteristics should guide the SRF community in exploiting or adapting the Fermi recipe; including why minimal subsequent EP is needed, and possible places for modification of the recipe to reduce polishing time. This work is authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. [1]CA Cooper, LD Cooley , ?Mirror Smooth Superconducting RF Cavities by Mechanical Polishing with Minimal Acid Use,? http://lss.fnal.gov/archive/2011/pub/fermilab-pub-11-032-td.pdf, (May 31, 2011)

Reece, Charles↗

Characterization of a synthetic single crystal diamond Schottky diode for radiotherapy electron beam dosimetry

Purpose: To investigate the dosimetric properties of synthetic single crystal diamond based Schottky diodes under irradiation with therapeutic electron beams from linear accelerators. Methods: A single crystal diamond detector was fabricated and tested under 6, 8, 10, 12, and 15 MeV electron beams. The detector performances were evaluated using three types of commercial detectors as reference dosimeters: an Advanced Markus plane parallel ionization chamber, a Semiflex cylindrical ionization chamber, and a p-type silicon detector. Preirradiation, linearity with dose, dose rate dependence, output factors, lateral field profiles, and percentage depth dose profiles were investigated and discussed. Results: During preirradiation the diamond detector signal shows a weak decrease within 0.7% with respect to the plateau value and a final signal stability of 0.1% (1{sigma}) is observed after about 5 Gy. A good linear behavior of the detector response as a function of the delivered dose is observed with deviations below {+-}0.3% in the dose range from 0.02 to 10 Gy. In addition, the detector response is dose rate independent, with deviations below 0.3% in the investigated dose rate range from 0.17 to 5.45 Gy/min. Percentage depth dose curves obtained from the diamond detector are in good agreement with the ones from the reference dosimeters. Lateral beam profile measurements show an overall good agreement among detectors, taking into account their respective geometrical features. The spatial resolution of solid state detectors is confirmed to be better than that of ionization chambers, being the one from the diamond detector comparable to that of the silicon diode. A good agreement within experimental uncertainties was also found in terms of output factor measurements between the diamond detector and reference dosimeters. Conclusions: The observed dosimetric properties indicate that the tested diamond detector is a suitable candidate for clinical electron beam dosimetry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Heat Capacity and Mössbauer Study of Self-Flux Grown FeTe Single Crystal

We report mainly the heat capacity and Mössbauer study of self-flux grown FeTe single crystal, which is a ground state compound of the Fe chalcogenides superconducting series i.e. FeTe{sub 1−x}(Se/S){sub x} The as grown FeTe single crystal is large enough to the tune of a few centimetres and the same crystallizes in tetragonal structure having space group of P4/nmm. FeTe shows the structural/magnetic phase transition at 70 K in both magnetic and resistivity measurements. Heat capacity measurement also confirms the coupled structural/magnetic transition at the same temperature. The Debye model fitting of low temperature (below 70 K) heat capacity exhibited Debye temperature (𝜃{sub D}) to be 324 K. Mössbauer spectra are performed at 300 and 5 K. The 300-K spectra showed two paramagnetic doublets and the 5-K spectra exhibited hyperfine magnetic sextet with an average hyperfine field of 10.6 Tesla matching with the results of Yoshikazu Mizuguchi et al.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗