Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SWITCH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Farm-level Interactions Study of a Novel Tri-port Soft-switching Medium-Voltage String Inverter (MVSI) based Large-scale PV-Plus-Storage Farms

A medium-voltage photovoltaic power conversion unit supported by battery based on a novel topology of soft switching solid state transformer is presented in this paper. It can reduce the Levelized Cost of Energy (LCOE) of PVS farm in an extended degree. However, its capability to provide grid-support services, such as frequency response, reactive power support, etc, have not been demonstrated. A series/parallel combination of these modules form a large 20 MVA solar farm. To validate them with reduced computation burden, a small-signal model of MVSI is firstly derived and validated in this paper. The model has been validated to match the full-switch model in both steady-state and dynamic conditions. Next, a farm-level simulation based on the proved small-signal model was implemented to demonstrate grid-support services. Real irradiation date from NREL is used to show the operational capabilities of the system. As a result, the overall farm is simulated based on MATLAB/Simulink domain to check the performance for various cases namely: power transfer from dc-ac side, reactive power support during grid voltage sag and utilization of battery during grid voltage disturbance or partial shading over PV panels.

14 SOLAR ENERGY↗

A Fast-Response High-Accuracy Overvoltage Protection Circuit for Soft-Switching Current-Source Converters

Although voltage-source converters (VSCs) have been a focus of research for decades and are widely applied in numerous applications, they face great challenges in short-circuit failures, high dv/dt and electromagnetic interference (EMI), especially using wide bandgap devices. Instead, current-source converters (CSCs) are attracting increasing attention in recent years owing to their friendliness to short-circuit faults, improved EMI, etc. For CSCs, overvoltage is the most catastrophic failure since the semiconductor devices can hardly withstand an overvoltage for a short pulse. In this paper, a fast-response high-accuracy overvoltage protection (OVP) circuit is proposed to protect CSCs from overvoltage damage. It also features a small form factor, good noise-immunity, friendly retrofit capability, and no need for active switches. In this paper, the operating principle and design guideline of the proposed OVP circuit is introduced. Its effectiveness is validated in soft-switching solid-state transformer (S4T) at 500 V. In experiments, the voltage detection error of less than 5% and a propagation delay of fewer than 400 ns have been achieved.

30 DIRECT ENERGY CONVERSION↗

Charging characteritiscs of ultrananocrystalline diamond in RF MEMS capacitive switches.

Modifications to a standard capacitive MEMS switch process have been made to allow the incorporation of ultra-nano-crystalline diamond as the switch dielectric. The impact on electromechanical performance is minimal. However, these devices exhibit uniquely different charging characteristics, with charging and discharging time constants 5-6 orders of magnitude quicker than conventional materials. This operation opens the possibility of devices which have no adverse effects of dielectric charging and can be operated near-continuously in the actuated state without significant degradation in reliability.

36 MATERIALS SCIENCE↗

Hybrid MOSFET/Driver for Ultra-Fast Switching

The ultra-fast switching of power MOSFETs, in about 1ns, is very challenging. This is largely due to the parasitic inductance that is intrinsic to commercial packages used for both MOSFETs and drivers. Parasitic gate and source inductance not only limit the voltage rise time on the MOSFET internal gate structure but can also cause the gate voltage to oscillate. This paper describes a hybrid approach that substantially reduces the parasitic inductance between the driver and MOSFET gate, as well as between the MOSFET source and its external connection. A flip chip assembly is used to directly attach a die-form power MOSFET and driver on a PCB. The parasitic inductances are significantly reduced by eliminating bond wires and minimizing lead length. The experimental results demonstrate ultra-fast switching of the power MOSFET with excellent control of the gate-source voltage.

42 ENGINEERING↗

Four-Switch Buck-Boost Converter Based on Model Predictive Control with Smooth Mode Transition Capability

Four-switch buck-boost converter supports both voltage step-up and step-down functionalities, but it suffers from mode transfer challenge that would need reliable mode detection when designed to operate in multi different modes. In this paper, a novel control method based on model predictive current control is proposed for such converter with inherent smooth mode transfer capability without extra design on mode detection and transfer scheme. Modulator and mode detection are replaced by an optimization process through cost function. This largely simplifies the design and makes it easily implemented. Therefore, seamless transfer between buck and boost modes is achieved with many other system level benefits. Simulation and experimental results are provided to verify the effectiveness of proposed method for the four-switch buck-boost converter.

42 ENGINEERING↗

On Per-Phase Topology Control and Switching in Emerging Distribution Systems

This paper presents a new concept and approach for topology control and switching in distribution systems by extending the traditional circuit switching to laterals and single-phase loads. Voltage unbalance and other key performance indicators including voltage magnitudes, line loading, and energy losses are used to characterize and demonstrate the technical value of optimizing system topology on a per-phase basis in response to feeder conditions. The near-optimal per-phase topology control is defined as a series of hierarchical optimization problems. The proposed approach is respectively applied to IEEE 13-bus and 123-bus test systems for demonstration, which included the impact of integrating electric vehicles (EVs) in the test circuit. It is concluded that the proposed approach can be effectively leveraged to improve voltage profiles with electric vehicles, the extent of which depends upon the performance of the base case without EVs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Fundamentals and technology for monolithically integrated RF MEMS switches with ultra-nanocrystaline diamond dielectric/CMOS devices.

Most current capacitive RF-MEMS switch technology is based on conventional dielectric materials such as SiO{sub 2} and Si{sub 3}N{sub 4}. However, they suffer not only from charging problems but also stiction problems leading to premature failure of an RF-MEMS switch. Ultrananocrystalline diamond (UNCD{sup (R)}) (2-5 nm grains) and nanocrystalline diamond (NCD) (10-100 nm grains) films exhibit one of the highest Young's modulus ({approx} 980-1100 GPa) and demonstrated MEMS resonators with the highest quality factor (Q {ge} 10,000 in air for NCD) today, they also exhibit the lowest force of adhesion among MEMS/NEMS materials ({approx}10 mJ/m{sup 2}-close to van der Waals attractive force for UNCD) demonstrated today. Finally, UNCD exhibits dielectric properties (fast discharge) superior to those of Si and SiO{sub 2}, as shown in this paper. Thus, UNCD and NCD films provide promising platform materials beyond Si for a new generation of important classes of high-performance MEMS/NEMS devices.

36 MATERIALS SCIENCE↗

Kinetics of State Switching in Quasi-One-Dimensional Nanosystems. Statistical Model of the Influence of Defects

The role of native and radiation-induced defects in the state switching kinetics for one-dimensional systems (nanowires, molecular single-chain magnets, biological macromolecules, and many others) has been studied. An analytical approach to the description of the influence of randomly located defects on the dynamics of new-phase domains is developed using an analogy with stochastic processes in queueing theory. This method makes it possible to calculate threshold phenomena and the dependence of switching fields on material parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gas spark switches with increased operating life for Marx generator of lightning test complex

A new design of gas spark switches with an increased operating life and stable dynamic characteristics for the Marx generator of the lightning test complex has been developed. The switches are characterized by the following parameters in the mode of operation: voltage up to 80 kV, discharge current up to 50 kA, flowing charge up to 3.5 C/pulse. An increased operating life is achieved by using torus-shaped electrodes with increased working surface area and a trigger electrode in the form of a thick disk with a hole located between them. Low breakdown delay time and high stability of breakdown voltage under dynamic conditions are provided by gas preionization in the spark gap using UV radiation of an additional corona discharge in the axial region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operation of a semiconductor opening switch at the pumping time of a microsecond and low current density

The mechanism of operation of a semiconductor opening switch (a SOS diode) at the forward-pumping time of a microsecond and low current density was studied. The current's cutoff time shorter than 10 ns at the voltage across the SOS diode as high as 80 kV was obtained experimentally at the reverse-pumping time {approx}200 ns and the cutoff-current density of about 120 A/cm{sup 2}. These are the results of numerical simulation of processes in the dynamics of the electron-hole plasma in the diode at the stages of pumping and current cutoff. It is shown that the stage of the current cutoff is similar to the conditions of the SOS effect observed at a high current density and is also related to motion of the concentration front of excess plasma along the heavily doped p-type region of the structure. In spite of the low density of current in the course of its cutoff, the switching process takes several nanoseconds. The reason is that the low current density is compensated by a low concentration of the excess plasma at the front, which retains the high velocity of motion of this front at the stage of the current cutoff.

36 MATERIALS SCIENCE↗

Electrically Controlled Logical Switch Based on a Step Yttrium–Iron Garnet Waveguide and a Piezoelectric Actuator

We have demonstrated the possibility of functioning a device based on a spin-wave waveguide containing two channels with different ferrite film thicknesses as a logical switch. For switching states, we have used the dependence of interference type (constructive or destructive) at the output converter common for two channels on the waveguide strain under action of the electrically controlled actuator.

30 DIRECT ENERGY CONVERSION↗

A Phase Switch for Electromagnetically Induced Gratings in a Medium with Λ Atoms

We have theoretically studied the possibility of using the phenomenon of phase switching of coherent population trapping for creating a switch of light propagation direction in electromagnetically induced gratings in a medium with Λ-atoms. The permissible region of this effect application is determined and the parameters are found which ensure the obtaining of a high-efficiency scheme of the spatial redistribution of probing field intensity on atomic density gratings.

74 ATOMIC AND MOLECULAR PHYSICS↗

Convex Relaxations for Quadratic On/Off Constraints and Applications to Optimal Transmission Switching

This paper studies mixed-integer nonlinear programs featuring disjunctive constraints and trigonometric functions and presents a strengthened version of the convex quadratic relaxation of the optimal transmission switching problem. We first characterize the convex hull of univariate quadratic on/off constraints in the space of original variables using perspective functions. Next, we introduce new tight quadratic relaxations for trigonometric functions featuring variables with asymmetrical bounds. These results are used to further tighten recent convex relaxations introduced for the optimal transmission switching problem in power systems. Using the proposed improvements, along with bound propagation, on 23 medium-sized test cases in the PGLib benchmark library with a relaxation gap of more than 1%, we reduce the gap to less than 1% on five instances. The tightened model has promising computational results when compared with state-of-the-art formulations.

97 MATHEMATICS AND COMPUTING↗

Laser-induced Bessel beams can realize fast all-optical switching in gold nanosol prepared by pulsed laser ablation

We demonstrate the possibility of realizing, all-optical switching in gold nanosol. Two overlapping laser beams are used for this purpose, due to which a low-power beam passing collinear to a high-power beam will undergo cross phase modulation and thereby distort the spatial profile. This is taken to advantage for performing logic operations. We have also measured the threshold pump power to obtain a NOT gate and the minimum response time of the device. Contrary to the general notion that the response time of thermal effects used in this application is of the order of milliseconds, we prove that short pump pulses can result in fast switching. Different combinations of beam splitters and combiners will lead to the formation of other logic functions too.

36 MATERIALS SCIENCE↗

Structural mechanism for modulation of functional amyloid and biofilm formation by Staphylococcal Bap protein switch

The Staphylococcal Bap proteins sense environmental signals (such as pH, [Ca 2+ ]) to build amyloid scaffold biofilm matrices via unknown mechanisms. We here report the crystal structure of the aggregation-prone region of Staphylococcus aureus Bap which adopts a dumbbell-shaped fold. The middle module (MM) connecting the N-terminal and C-terminal lobes consists of a tandem of novel double-Ca 2+ -binding motifs involved in cooperative interaction networks, which undergoes Ca 2+ -dependent order-disorder conformational switches. The N-terminal lobe is sufficient to mediate amyloid aggregation through liquid-liquid phase separation and maturation, and subsequent biofilm formation under acidic conditions. Such processes are promoted by disordered MM at low [Ca 2+ ] but inhibited by ordered MM stabilized by Ca 2+ binding, with inhibition efficiency depending on structural integrity of the interaction networks. Furthermore, these studies illustrate a novel protein switch in pathogenic bacteria and provide insights into the mechanistic understanding of Bap proteins in modulation of functional amyloid and biofilm formation, which could be implemented in the anti-biofilm drug design.

59 BASIC BIOLOGICAL SCIENCES↗

Plasma Switch for High-Power Active Pulse Compressor

Results are presented from experiments carried out at the Naval Research Laboratory X-band magnicon facility on a two-channel X-band active RF pulse compressor that employed plasma switches. Experimental evidence is shown to validate the basic goals of the project, which include: simultaneous firing of plasma switches in both channels of the RF circuit, operation of quasi-optical 3-dB hybrid directional coupler coherent superposition of RF compressed pulses from both channels, and operation of the X-band magnicon directly in the RF pulse compressor. For incident 1.2 μs pulses in the range 0.63 - 1.35 MW, compressed pulses of peak powers 5.7 - 11.3 MW were obtained, corresponding to peak power gain ratios of 8.3 - 9.3. Insufficient bakeout and conditioning of the high-power RF circuit prevented experiments from being conducted at higher RF input power levels.

43 PARTICLE ACCELERATORS↗

Electron-Beam Switches For A High Peak Power Sled-II Pulse Compressor

Omega-P demonstrated triggered electron-beam switches on the L=2 m dual-delay-line X-band pulse compressor at Naval Research Laboratory (NRL). In those experiments, with input pulses of up to 9 MW from the Omega-P/NRL X-band magnicon, output pulses having peak powers of 140-165 MW and durations of 16-20 ns were produced, with record peak power gains M of 18-20. Switch designs are described based on the successful results that should be suitable for use with the existing SLAC SLED-II delay line system, to demonstrate C=9, M=7, and n>>78%, yielding 173ns compressed pulses with peak powers up to 350MW with input of a single 50-MW.

43 PARTICLE ACCELERATORS↗

Evaluation of High Rotor Pole Switched Reluctance Motors to Control Condenser Fans in a Commercial Refrigeration System

A high rotor pole switched reluctance motor (HRSRM) designed by Software Motor Corporation was evaluated for use as a condenser fan motor due to its reported high motor efficiency over a broad range of speeds and added advanced control potential. The project was split into two phases; the first of which was to determine the direct energy savings due to the increased motor efficiency, the second was to leverage the additional benefits of the energy efficiency measure (EEM) to create additional energy savings. This report only discusses results from the first phase of the project. Nine 1.5hp HRSRMs were installed parallel to the same number of legacy induction motors of a supermarket commercial refrigeration system located in Lakeside, Colorado. At this site, the 1.5 hp legacy motors had historically adjusted condenser fan speed from 200-870 rpm based on outdoor air temperature and compressor discharge pressure. This type of control is known as variable head pressure control (VHPC). These nine new motors were given a signal from the legacy variable frequency drive (VFD) to match the motor speed of the legacy motors. Determination of the energy savings of the EEM was performed over a two-month period, at which time a correlation between legacy and EEM power consumption was developed based on motor speed. Annual data that had been collected from 2016-2017 (before the two-month test period) was then leveraged to predict the annual energy savings of the EEM for a complete retrofit using both VHPC and constant fan speed control. Table 1 displays the quantitative results. The EEM saved 27% of total energy consumption of the condenser fan motors for constant fan speed control, while the energy savings increased to 32% when using VHPC. This was due to the improved motor efficiency of the HRSR motor at low speeds. While the constant speed fan control kept the motors running at 870 rpm, VHPC adjusted fan speed between 200-870rpm based on the outdoor air temperature and the compressor discharge pressure. These savings are assuming a direct replacement with no additional controls. Retrofitting a constant speed fan control system with HRSRMs and switching to VHPC would provide significant energy savings looking at the condenser alone. Additional considerations of the EEM were noted during the project as well. The HRSRM system made it possible to identify and remotely shutdown an individual motor when a piece of foam locked the fan and thereby the motor. With the traditional system, a locked rotor could have caused motor damage unless a breaker or fuse was activated. Furthermore, due to vibration complaints from the installation technicians, the ramp-up time of the HRSRM had to be increased to a minute. After implementing this change no complaints for excessive vibration were recorded.

15 GEOTHERMAL ENERGY↗