Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Boron Phosphide Films by Reactive Sputtering: Searching for a P‐Type Transparent Conductor

Abstract With an indirect band gap in the visible and a direct band gap at a much higher energy, boron phosphide (BP) holds promise as an unconventional p‐type transparent conductor. This work reports on reactive sputtering of amorphous BP films, their partial crystallization in a P‐containing annealing atmosphere, and extrinsic doping by C and Si. The highest hole concentration to date for p‐type BP (5 × 10 20 cm −3 ) is achieved using C doping under B‐rich conditions. Furthermore, bipolar doping is confirmed to be feasible in BP. An anneal temperature of at least 1000 °C is necessary for crystallization and dopant activation. Hole mobilities are low and indirect optical transitions are stronger than that predicted by theory. Low crystalline quality probably plays a role in both cases. High figures of merit for transparent conductors might be achievable in extrinsically doped BP films with improved crystalline quality.

36 MATERIALS SCIENCE↗

Understanding Reproducibility of Sputter‐Deposited Metastable Ferroelectric Wurtzite Al 0.6 Sc 0.4 N Films Using In Situ Optical Emission Spectrometry

High‐Sc Al 1– x Sc x N thin films are of tremendous interest because of their attractive piezoelectric and ferroelectric properties, but overall film quality and reproducibility are widely reported to suffer as x increases. In this study, structural and electrical properties of metastable Al 0.6 Sc 0.4 N films are connected with plasma changes during film growth, identified via glow discharge optical emission spectroscopy (GD‐OES), and linked to the target mode changes. This in situ GD‐OES technique uses changes in the N 2 (I) intensity, correlated with DC bias hysteresis behavior of a Al 0.6 Sc 0.4 target in metallic and poisoned modes, to identify films that subsequently exhibit unacceptable structural and electrical performance. Two representative samples deposited under identical conditions but possessing distinct properties related to phases present in the films are focused on. Films sputtered under a poisoned target mode produce pure wurtzite ferroelectric Al 0.6 Sc 0.4 N with a reversible 80 μC cm −1 polarization and 3.1 MV cm −1 coercive field. When identical chamber settings are used but the process starts in metallic mode, a mixed wurtzite/rocksalt film is deposited which exhibits nanometer‐scale changes to the film microstructure and a nonferroelectric response. These results illustrate the utility of optical emission spectroscopy for tracking target mode fluctuations when fabricating metastable materials such as high‐Sc Al 1– x Sc x N films.

36 MATERIALS SCIENCE↗

Accounting for the Complex Surface Structure in Ellipsometric Studies of the Effects of Magnetron Sputtering Modes on the Growth and Optical Properties of In{sub 2}O{sub 3} Films

The efficiency of invoking additional information on optical transmission in solving the inverse problem of ellipsometry by a minimization method is demonstrated in practice for In{sub 2}O{sub 3} fi doped and nondoped with Sn on Al{sub 2}O{sub 3} (012) substrates. This approach allows the thickness and refractive index of thin films with rough surfaces to be uniquely determined. Solutions of the inverse problem in the framework of one-, two-, and multilayer models are compared. The last provides the best description of the experimental data and the correct parameters of the samples. The dependences of the investigated properties of films produced with different magnetron sputtering modes are found using the above methods and models and do not contradict general concepts about the film formation by this material.

36 MATERIALS SCIENCE↗

Ti Capping Layer Effects in Microstructure and Magnetic Properties of Sputter-Deposited FePt Thin Film

Ti/FePt/Fe nano-thin films were fabricated by a DC facing-target magnetron sputtering method onto glass substrates at room temperature and were subsequently annealed in situ in vacuum. The impacts of the Ti capping layer on microstructural and magnetic properties of the FePt films were investigated in detail. X-ray diffraction (XRD) patterns demonstrate that the film is deposited onto glass substrates and the addition of a Ti layer forms ternary TiFePt, and binary PtTi and FeTi alloys. The results reveal refined granularity, decreased roughness, and enhanced coercivity and degree of squareness after the introduction of a Ti capping layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Double Hard Axes of Hysteresis Loop in Wide-Angle Obliquely Sputtered CoFeB Amorphous Films

Soft magnetic Co{sub 40}Fe{sub 40}B{sub 20} films with different tilt angle were successfully deposited on silicon substrates by using oblique sputtering technique. Different oblique angles are achieved by controlling the position of samples. The corresponding static magnetic properties of these samples were then systematically investigated. Interestingly, with the oblique angle increasing from 38° to 55°, the MOKE hysteresis loop of the thin films displays a unique and special performance with double hard axes. Meanwhile, despite of the measurement magnetic field along PR or AR direction, both of the hysteresis loops have two-stage magnetization reversal that means there are two comparably strong anisotropies in the CoFeB films. Moreover, rotating samples from in-plane to out-of-plane, the hysteresis loops demonstrate the perpendicular anisotropy exist in CoFeB films. The cross-section SEM characterizations further verify that the residual field from the magnetic cylinder will strongly impact the microstructures of thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Magnetotransport Characteristics of Cr-Substituted Ni{sub 55}Mn{sub 34}Sn{sub 11} Thin Films Grown by Magnetron Sputtering

Highly oriented Cr-substituted Ni{sub 55}Mn{sub 34}Sn{sub 11} Heusler thin films having thickness ~ 400 nm were deposited by Ultrahigh vacuum dc magnetron sputtering on MgO (100) substrates. At room temperature, the films exhibit a mixture of dominant L2{sub 1} cubic austenite phase, as revealed by the intense (002) and (004) peaks, along with small fraction of the orthorhombic–martensitic phase. Surface morphology of the thin films showed distribution of Cr-rich and Cr-deficit regions together with patterned and aligned magnetic domains, thus bringing out the inherent room temperature ferromagnetism of the film. At temperatures above the Curie temperature, T{sub C} ~ 321 K, the magnetic behaviour of the films is seen to follow the Curie law rather than the Curie–Weiss law. Ferromagnetic to antiferromagnetic transition appears at T{sub N} ~ 247 K, which gives rise to exchange bias at low temperatures due to the coexistence of the two magnetic orders. This phase coexistence also leads to the formation of a spin glass state deep into the martensitic region. The film exhibits metal-like nature at high temperature and semiconductor-like behaviour with the lowering of temperature. A reentrant metallic state is observed at T ≤ 38 K during cooling that persists up to ≤ 62 K in warming cycle. The hysteresis in the ρ–T curve spread over a very wide temperature range confirms the magnetic phase coexistence in the martensitic state in the present thin films. The magnetoresistance (MR) first increases (2.4% at 300 K and H = 50 kOe) with temperature and maximizes to around ~ 3.25% at T = 150 K and then starts decreasing. Its value in the glassy state is very small. This shows that a magnetic liquid like state is more conducive to larger MR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photocatalytic activity of anatase titanium dioxide nanostructures prepared by reactive magnetron sputtering technique

In this work, nanostructured titanium dioxide (TiO{sub 2}) photocatalysts with high optical and structural homogeneity were successfully synthesized by dc reactive magnetron sputtering technique. The TiO{sub 2} thin films were produced with high structural homogeneity without any heat treatment. Analysis of the X-ray diffraction patterns and UV–visible spectroscopy gave an indication that the structure of prepared films is anatase with energy band gap of 3.23 eV. The Fourier-transform infrared spectroscopy has confirmed the formation of Ti–O bond. The average size of TiO{sub 2} particles in the deposited films was ranging in 5–7 nm. These nanostructures are very applicable as photocatalysts as their photocatalytic activity was determined from the degradation rate with UV irradiation time as the first order reaction rate constant was determined to be 2.4 × 10{sup −3} min{sup −1}.

36 MATERIALS SCIENCE↗

Physical properties of RF magnetron sputtered GaN/n-Si thin film: impacts of RF power

GaN thin film was successfully produced on n-Si(100) substrate by RF magnetron sputter under different RF power. Experimental measurement techniques such as UV/Vis spectroscopy, field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and Micro-Raman Spectroscopy were used to research effects of Radio Frequency power on physical properties of produced thin film. It has been found that produced thin film was polycrystalline structure with (100) and (110) planes of hexagonal GaN from X-ray diffraction measurement result. It also proved that increasing RF power gives rise to deterioration in crystal quality of GaN thin film. Reason of this deterioration was discussed. It has been achieved that increasing RF power has resulted in decreasing optical band gap energy of GaN thin film. Reasons for these changes in optical band gap energy were explained. It was seen that some thin films were grown as layer-plus-island mode (Stranski–Krastanov growth mode) and others were grown as layer-by-layer growth mode (Frank van der Merwe mode) from AFM analysis. It has been found that increasing RF power has resulted in improvement of surface morphology of thin film from field emission scanning electron microscopy analysis. However, reaching RF power to 125 W leads to start to deteriorate of surface of GaN thin film. The reasons for this have been discussed. E{sub 1}(TO) transverse optical phonon mode of hexagonal GaN with different intensity was detected from Micro-Raman Spectroscopy measurement. The reasons for this difference have been discussed. It was concluded that RF power has played a significant role in growing high quality GaN thin film. Morphological, structural, and optical properties of GaN thin film were enhanced by controlling RF power, making them a potential candidate for LED, solar cell, diode application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of growth temperatures on the structural and optoelectronic properties of sputtered zinc sulfide thin films for solar cell applications

The role of various substrate temperatures on the structural and optoelectronic properties of sputtered zinc sulfide (ZnS) thin films has been investigated in this work. The study of prepared film characterization has been done by XRD, AFM, UV–Vis spectrometry and Hall-effect measurement analysis. XRD patterns of the room temperature grown films reveal an amorphous nature, while the films deposited at 100 °C, 200 °C. 300 °C and 400 °C are found to be polycrystalline having the (111) preferential orientation. The optical bandgap values are found in the range of 3.18–3.61 eV depending on the substrate temperatures. The bulk and surface carrier densities are found in the order of 10{sup 12} cm{sup −3} and 10{sup 7} cm{sup −3}, respectively. The growth temperatures are also observed to have a significant effect on the electrical characteristic of the deposited films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Evaluation of optical parameters and characterization of few layer sputtered MoS{sub 2} film by spectroscopic ellipsometry

The study involves spectroscopic ellipsometry analysis of sputter deposited few layer MoS{sub 2} grown on three different substrates (ITO coated glass, n-silicon and p-silicon) for diverse deposition time. We have investigated optical parameters such as refractive index, extinction coefficient and dielectric constant of MoS{sub 2} layers in the visible region of electromagnetic spectrum. For such purpose of investigation we have involved Cauchy dispersion model (for the film deposited on n-silicon and p-silicon) and hybrid of Lorentz and Drude model (for the film deposited on ITO coated glass). Furthermore, comparative analysis at the diverse growth time of 5, 10, 15 and 20 min has been performed on the basis of optical parameters and surface morphology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of oxygen concentrations on structural and optical properties of RF magnetron sputtered ZnO thin films

We report an investigation on the effect of oxygen flow rate on the structural and optical properties of zinc oxide thin films prepared by RF magnetron sputtering. The structural measurements were carried using grazing incidence X-ray diffraction, atomic force microscopy and Raman spectroscopy. The role of oxygen partial pressure on the crystallinity, the surface morphology and vibrational modes has been established. The optical properties of the films were investigated using FR-Basic-VIS/NIR fitted with FR-Monitor software for film thickness, refractive index and color determination. The film thickness is observed to increase when oxygen is introduced at 4 sccm but eventual decrease with increase in the flow rate an indication of initial increase in rate of deposition followed by reduction. Elaborate explanations of these trends are provided.

36 MATERIALS SCIENCE↗

Properties of Gallium Oxide Films Obtained by HF-Magnetron Sputtering

The results of an analysis of structure and phase composition of gallium oxide films obtained by HF-magnetron sputtering are presented. It is shown that in the interval 290–350 K, the increase in the film conductivity with increasing temperature is due to the excitation of electrons from a local level Е{sub t} located 0.95 eV below the conduction band bottom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Oxidation Performance of a NiCoCrAlYSiHf + NiAl Composite Coating Deposited by Arc Ion Plating and Magnetron Sputtering Techniques

A NiCoCrAlYSiHf+NiAl composite coating was deposited onto a second-generation single-crystal superalloy René N5 by methods of arc ion plating and magnetron sputtering. After vacuum annealing, the composite coating exhibited a gradient distribution of elements, in which Al was enriched in outer layer and Cr was enriched in inner layer. Compared with conventional NiCoCrAlYSiHf and β-NiAl coatings, the composite coating was evaluated in isothermal and cyclic oxidation tests at 1100 °C in ambient air. The results showed that the oxidation rate of the composite coating was lower than that of NiCoCrAlYSiHf coating. Meanwhile, the extent of interdiffusion between coating and substrate in the composite coating was slighter compared with that in the β-NiAl coating. Microstructure evolutions of the composite coating after annealing and further oxidation test are investigated.

36 MATERIALS SCIENCE↗

X-ray photoelectron spectroscopy and rotating disk electrode measurements of smooth sputtered Fe-N-C films

Electrocatalysts for the oxygen reduction reaction (ORR) based on complexes of iron and nitrogen in a carbon matrix (Fe-N-C) are a promising alternative to platinum group metal (PGM) based catalysts in polymer electrolyte membrane (PEM) fuel cells. Further improvements of Fe-N-C catalysts would benefit from model thin film studies of activity and stability of catalytic sites, but synthesis of Fe-N-C model thin films is challenging. Here we report on synthesis and characterization of Fe-N-C thin films produced by co-sputtering iron and carbon in a reactive nitrogen atmosphere onto removable glassy carbon rotating disk electrode (RDE) tips. Scanning electron microscopy (SEM) measurements indicate that the Fe-N-C films deposited at high temperature are smoother than the films annealed at high temperature. Electrocatalytic activity measured on the thin Fe-N-C films is greater for both high-temperature samples than for the room-temperature sample. From the analysis of X-ray photoelectron spectroscopy (XPS) data, exposure of the films to high temperatures results in increased graphitization of the carbon with the Fe-N-C films, and increased relative amount of graphitic and hydrogenated nitrogen species. Overall the results of this study demonstrate the feasibility of a thin film model system approach for studying active sites in PGM-free catalysts.

14 SOLAR ENERGY↗

Properties of Nb3Sn films fabricated by magnetron sputtering from a single target

Superconducting Nb3Sn films were fabricated on sapphire and fine grain Nb substrates by magnetron sputtering from a single stoichiometric Nb3Sn target. The structural, morphological and superconducting properties of the films annealed for 24 h at temperatures of 800-1000 {\deg}C were investigated. The effect of the annealing time at 1000 {\deg}C was examined for 1, 12, and 24 h. The film properties were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The DC superconducting properties of the films were characterized by a four-point probe measurement down to cryogenic temperatures. The RF surface resistance of films was measured over a temperature range of 6-23 K using a 7.4 GHz sapphire-loaded Nb cavity. As-deposited Nb3Sn films on sapphire had a superconducting critical temperature of 17.21 K, which improved to 17.83 K when the film was annealed at 800 {\deg}C for 24 h. For the films annealed at 1000 {\deg}C, the surface Sn content was reduced to ~11.3 % for an annealing time of 12 h and to ~4.1 % for an annealing time of 24 h. The Raman spectra of the films confirmed the microstructural evolution after annealing. The RF superconducting critical temperature of the as-deposited Nb3Sn films on Nb was 16.02 K, which increased to 17.44 K when the film was annealed at 800 {\deg}C for 24 h.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and superconducting properties of Nb 3 Sn films grown by multilayer sequential magnetron sputtering

Nb 3 Sn thin films are fabricated by sequential sputtering followed by annealing at 850–1200°C in vacuum. The effects of the annealing temperature and time on the formation of Nb 3 Sn were examined. The film crystal structure, morphology, surface topography and composition were distinguished by X-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, and energy dispersive X-ray spectroscopy analysis. The superconducting properties of the films were characterized by measuring the surface resistivity by the four-point probe method. The highest critical temperature T c = 17.86 K was observed for the Nb 3 Sn films annealed at 950°C for 3 h. When the films were annealed above 1000°C for 3 h, Sn evaporation resulted in a Nb-rich film, degrading the superconducting performance. Annealing at 1200°C for 3 h resulted in evaporation of Sn leaving less than 1% Sn on the surface, as detected by energy dispersive spectroscopy, and for that film a T c of 7.9 K was observed.

36 MATERIALS SCIENCE↗

10% Efficiency Cu(In,Ga)Se2 Solar Cell with Strongly (220)/(204) Oriented Cu-Poor Absorber Layers Sputtered Using Single Quaternary Target

Cu-poor CIGS thin films were fabricated by RF magnetron sputtering from a single quaternary target with the composition of Cu0.7In0.7Ga0.3Se2, in an effort to improve the cell efficiency of CIGS solar cells. The Cu-poor thin films with the ([Cu]/[In]+[Ga]) composition ratios of 0.70-0.77 were obtained showing that the composition of the target can be transferred to the film. It was also observed that the strongly (220)/(204) preferred orientation appeared at the substrate temperatures higher than 600 degrees C, which is known to be essential for achieving high-quality CIGS solar cells. This result indicates that the Cu-Se compounds present in trace amounts of CIGS films hinder the (112) orientation and promotes the growth of the (220) orientation. As a result, the CIGS absorber layer with the Cu-poor composition and the (220)/(204) preferred orientation exhibited a drastically improved cell efficiency of 10.02%.

14 SOLAR ENERGY↗

Thin film combinatorial sputtering of Al-Ce alloys: Investigating the phase separation of as-deposited solid solutions and determining the coefficient of thermal expansion

Al x Ce 100–x thin films with a composition range of ~75.0 < x < 99.5 at% (36.5 < x < 97.5 wt%) were synthesized via combinatorial co-sputtering from an Al and an Al 50 Ce 50 target. The crystal structure, phase fraction, film morphology, electrical resistivity, and temperature-dependent coefficients of thermal expansion (CTE) are all correlated to the Al x Ce 100–x composition. The as-deposited films form a metastable solid-solution, and annealing leads to the formation of the thermodynamically stable two-phase system of Al and the α-Al 11 Ce 3 intermetallic. Temperature dependent x-ray diffraction (XRD) reveals that the two phases expand independently of one another, and the thin film Al temperature-dependent CTE is similar to bulk Al. The thin film Al 11 Ce 3 intermetallic phase has a nearly constant CTE of ~1.5 × 10 –5 /°C within the temperature range studied (25–550 °C). To confirm the thin film Al 11 Ce 3 results, bulk stoichiometric Al 11 Ce 3 and +/- 1 wt% Ce samples were prepared and the CTE of each was measured with the same conditions. A Rietveld analysis of the bulk data enabled an estimation of the CTE in each of the 3 orthorhombic lattice parameters, which displayed anisotropic behavior. The thin film and bulk CTE measurements were in very good agreement. Estimations of the temperature dependent CTE of the two-phase alloys are made via the Reuss and Voigt models. Finally, by demonstrating the efficacy of the approach, more complex multi-component rapid materials discovery of low CTE Al-alloys can be pursued via the combinatorial thin film synthesis and XRD measurement.

36 MATERIALS SCIENCE↗