Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPACECRAFT GUIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Guidance and control strategies for aerospace vehicles

The optimal control problem arising in coplanar, orbital transfer employing aeroassist technology is addressed. The maneuver involves the transfer from high Earth orbit to low Earth orbit. A performance index is chosen the minimize the fuel consumpltion for the transfer. Simulations are carried out for establishing a corridor of entry conditions which are suitable for flying the spacecraft through the atmosphere. A highlight of the paper is the application of an efficient multiple shooting method for taming the notorious nonlinear, two-point, boundary value problem resulting from optimization procedure.

Naidu, Desineni S.↗
NASA NTRS2011

NASA Tech Briefs, May 2011

Topics covered include: 1) Method to Estimate the Dissolved Air Content in Hydraulic Fluid; 2) Method for Measuring Collimator-Pointing Sensitivity to Temperature Changes; 3) High-Temperature Thermometer Using Cr-Doped GdAlO3 Broadband Luminescence; 4)Metrology Arrangement for Measuring the Positions of Mirrors of a Submillimeter Telescope; 5) On-Wafer S-Parameter Measurements in the 325-508-GHz Band; 6) Reconfigurable Microwave Phase Delay Element for Frequency Reference and Phase-Shifter Applications; 7) High-Speed Isolation Board for Flight Hardware Testing; 8) High-Throughput, Adaptive FFT Architecture for FPGA-Based Spaceborne Data Processors; 9) 3D Orbit Visualization for Earth-Observing Missions; 10) MaROS: Web Visualization of Mars Orbiting and Landed Assets; 11) RAPID: Collaborative Commanding and Monitoring of Lunar Assets; 12) Image Segmentation, Registration, Compression, and Matching; 13) Image Calibration; 14) Rapid ISS Power Availability Simulator; 15) A Method of Strengthening Composite/Metal Joints; 16) Pre-Finishing of SiC for Optical Applications; 17) Optimization of Indium Bump Morphology for Improved Flip Chip Devices; 18) Measuring Moisture Levels in Graphite Epoxy Composite Sandwich Structures; 19) Marshall Convergent Spray Formulation Improvement for High Temperatures; 20) Real-Time Deposition Monitor for Ultrathin Conductive Films; 21) Optimized Li-Ion Electrolytes Containing Triphenyl Phosphate as a Flame-Retardant Additive; 22) Radiation-Resistant Hybrid Lotus Effect for Achieving Photoelectrocatalytic Self-Cleaning Anticontamination Coatings; 23) Improved, Low-Stress Economical Submerged Pipeline; 24) Optical Fiber Array Assemblies for Space Flight on the Lunar Reconnaissance Orbiter; 25) Local Leak Detection and Health Monitoring of Pressurized Tanks; 26) Dielectric Covered Planar Antennas at Submillimeter Wavelengths for Terahertz Imaging; 27) Automated Cryocooler Monitor and Control System; 28) Broadband Achromatic Phase Shifter for a Nulling Interferometer; 29) Super Dwarf Wheat for Growth in Confined Spaces; 30) Fine Guidance Sensing for Coronagraphic Observatories; 31) Single-Antenna Temperature- and Humidity-Sounding Microwave Receiver; 32) Multi-Wavelength, Multi-Beam, and Polarization-Sensitive Laser Transmitter for Surface Mapping; 33) Optical Communications Link to Airborne Transceiver; 34) Ascent Heating Thermal Analysis on Spacecraft Adaptor Fairings; 35) Entanglement in Self-Supervised Dynamics; 36) Prioritized LT Codes; 37) Fast Image Texture Classification Using Decision Trees; 38) Constraint Embedding Technique for Multibody System Dynamics; 39) Improved Systematic Pointing Error Model for the DSN Antennas; 40) Observability and Estimation of Distributed Space Systems via Local Information-Exchange Networks; 41) More-Accurate Model of Flows in Rocket Injectors; 42) In-Orbit Instrument-Pointing Calibration Using the Moon as a Target; 43) Reliability of Ceramic Column Grid Array Interconnect Packages Under Extreme Temperatures; 44) Six Degrees-of-Freedom Ascent Control for Small-Body Touch and Go; and 45) Optical-Path-Difference Linear Mechanism for the Panchromatic Fourier Transform Spectrometer.

Source record↗
NASA NTRS2020

Aerocapture as an Option for Ice Giants Mission

Aerocapture is an atmospheric maneuver where the aerodynamic forces of the vehicle (lift and drag) are used to provide the 𝞓V needed to slow down from the approach hyperbolic trajectory to achieve the desired captured orbit around the target planet. The aeroassist capture provides a large savings in propulsion needed to change the velocity of the vehicle, since aerodynamic forces rather than propulsive systems provide the change in velocity. Aerocapture requires an integrated system level design, including thermal protection systems, actuator systems for aerodynamic modulation, and guidance and control systems that can autonomously command the change in the aeroassist forces. Although aerocapture has been proposed for many situations in the past, including Mars, Venus, Titan, Saturn, Uranus, and Neptune orbiters as well as for Earth demonstration missions, it has not been attempted on any missions. However, many studies in the past three decades that have considered aerocapture as a design option have concluded that there are large mass savings that come from using aeroassist forces rather than propulsive forces to put a spacecraft into a captured orbit. The benefits are destination dependent, but some of the largest mass savings occur for the Ice Giants planets. Due to the large hyperbolic velocities of interplanetary trajectories approaching Uranus and Neptune, large amount of propulsion must be used to put a spacecraft in science orbits around these planets. Aerocapture can reduce the propulsion needs by dissipating energy in the sizable atmospheres of Uranus and Neptune. NASA commissioned a detailed study analysis to quantify the benefits, if any, for use at Neptune. The study found that even having to provide a heat shield aerocapture could deliver 40% more payload than an all-propulsive vehicle, and also provides for a 3–4-year reduction in trip time. Mass savings are expected also at Uranus with an aerocapture mission. Additionally, more recent advances in thermal protection systems and guidance and control systems show a path to increase capabilities beyond those results. This paper will discuss the merits of including aerocapture as an option for an Ice Giants mission. The discussion will focus on the cost and mass savings of using aerocapture instead of propulsive burns for Ice Giants orbiter mission scenarios while also detailing a potential concept of operations and entry vehicle design. Finally, the talk will discuss more recent work that shows aerocapture design is possible without the development of any novel entry vehicle. Thus, aerocapture can significantly improve science capabilities for an Ice Giants mission.

Soumyo Dutta↗
NASA NTRSDate not supplied

Design of a Jettison System For Space Transit Vehicles

Many options to re-use waste are currently being developed by NASA. These include combustion, compaction, torrefaction, and converting waste materials to an easily stored base polymer for future use. Human exploration missions require large amounts of supplies such as food, clothing and spare parts. A many-month journey to Mars will result in the generation of a substantial amount of problematic waste products. It is thought that this waste must be discarded to enable a Mars transit mission. The most cost-effective, reliable, and safest method to address this problem may be to simply jettison these materials from the spacecraft. The ability to jettison requires a multi-component integrated system design. Major components include a launcher, airlocks, trash bags, and tracking system. Depending upon mission requirements, a jettison dedicated airlock may be necessary. In other cases, the crew airlock might be all that’s needed. Examples of what to jettison include food waste, fecal containers, broken equipment, foam, expendables, hygiene products, health items, wipes, and clothing. The most important design factor is always crew safety. Other features to consider are loss of air due to the inefficiencies of vacuum pumps in the airlock, outgassing from the bags, and liquids condensing on the airlock that result in unwanted coatings. The launching system design must consider many different features: while in planetary orbit, a minimum exit velocity is necessary so the jettisoned material will not complete an orbit only to return and strike the ship. Also, for planetary protection issues, enabling waste to be sent to distant non-critical locations is highly desirable. When the space craft is in planetary transit to say, Mars, the jettison exit velocity should be low if the material is not released along the direction of travel. This is to minimize trajectory perturbations due to jettison-imposed torque on the spacecraft. Design considerations for the launcher include exit velocity, power consumption, volume and mass of material jettisoned, and frequency of jettison. Finally, the launcher must be able to handle many different types and shapes of waste products. This paper will discuss these design issues and give guidance to a pathway forward.

Steve Sepka↗
NASA NTRSDate not supplied

Spacecraft Line-Of-Sight Jitter Mitigation and Management Lessons Learned and Engineering Best Practices

Predicting, managing, controlling, and testing spacecraft line-of-sight (LoS) jitter caused by micro-vibrations due to onboard internal disturbance sources is a formidable multidisciplinary engineering task. It is especially challenging for those missions hosting high-performance, vibration-sensitive optical sensor payloads with stringent pointing stability requirements. Both NASA and ESA are planning technically aggressive spaceflight missions that include ultra-high-performance optical payloads with delicate, highly vibration-sensitive scientific and observational instruments. The GN&C community of practice will need to leverage and build upon their collective experiences and lessons learned to better address future micro-vibration challenges. To identify lessons learned and best engineering practices the NASA Engineering & Safety Center (NESC) sponsored a two-day Spacecraft LoS Jitter Workshop in late 2019. The workshop’s goal was to provide a multidisciplinary forum to elicit deeper understanding of the issues related to solving the spacecraft LoS jitter/micro-vibration problem. A primary objective was to identify and share best practices, rules of thumb, and options for jitter-related activities. Representatives from NASA, JPL, ESA, along with NASA’s industrial partners, independent consultant subject matter experts, and members of academia participated in the workshop. This paper will describe the motivation for the NASA Spacecraft LoS Jitter Workshop and summarize the identified findings, observations, and recommendations.

Lessons Learned;↗
NASA NTRSDate not supplied

Lidar-Based Safe Site Relative Navigation

There has been a renewed focus in exploration of the lunar surface and maximizing scientific potential of such missions is made possible in part by minimizing the time required to set up operations; that is, reducing transit time on the surface by increasing the landing precision with respect to the intended target. Established SPLICE project precision landing requirements necessitate a navigation filter architecture and underlying models developed specifically with these needs in mind. To date, test flights to characterize SPLICE GNC system performance have not provided a means to divert from the a priori selected landing site due to hazardous conditions. With the inclusion of a new sensor, the HDL, coupled with safe landing site selection algorithms, GNC can divert from the originally planned trajectory and navigate relative to the new targeted landing site. This work presents a novel hazard relative measurement model and covariance transformation methodology that enable the navigation system to inform a safe-site relative guidance profile to meet project precision landing goals.

Navigation↗
NASA NTRS1976

Penetrator mission concepts for exploration of the Galilean satellites

Penetrators are elongated missile-shaped objects designed to implant scientific instrumentation to depths of 1 to 15 meters in a wide variety of soil. A typical penetrator weighs 35 kg and impacts the surface at 150 m/sec oriented as close as possible to vertical. A spacecraft bus carries the penetrators to the target body, controls their deployment, and serves as a data communications relay. The analysis addresses the question of basic feasibility and covers such topics as trajectory requirements and delivered mass capability, deployment modes and penetrator retro sizing, impact site accessibility, guidance and control, and penetrator/bus communications. We conclude that such missions, while difficult in many respects, appear to be technically feasible in the context of Jovian system exploration in the post-1985 time period.

Friedlander, A. L.↗
NASA NTRS2016

The Lightweight Integrated Solar Array and Transceiver (LISA-T): Second Generation Advancements and the Future of SmallSat Power Generation

This paper describes the second generation advancements of the Lightweight Integrated Solar Array and Transceiver (LISA-T) currently being developed at NASA's Marshall Space Flight Center. LISA-T is a launch stowed, orbit deployed array on which thin-film photovoltaic and antenna elements are embedded. Inherently, small satellites are limited in surface area, volume, and mass allocation; driving competition between power, communications, and GN&C (guidance navigation and control) subsystems. This restricts payload capability and limits the value of these low-cost satellites. LISA-T is addressing this issue, deploying large-area arrays from a reduced volume and mass envelope - greatly enhancing power generation and communications capabilities of small spacecraft. A matrix of options are in development, including planar (pointed) and omnidirectional (non-pointed) arrays. The former is seeking the highest performance possible while the latter is seeking GN&C simplicity. In both cases, power generation ranges from tens of watts to several hundred with an expected specific power >250W/kg and a stowed power density >200kW/m(sub 3). Options for leveraging both high performance, 'typical cost' triple junction thin-film solar cells as well as moderate performance, low cost cells are being developed. Alongside, both UHF (ultra high frequency) and S-band antennas are being integrated into the array to move their space claim away from the spacecraft and open the door for omnidirectional communications and electronically steered phase arrays.

Carr, John A.↗
NASA NTRSDate not supplied

Autonomous Nanosatellite Swarming (ANS) Using Radio Frequency and Optical Navigation

The Autonomous Nanosatellite Swarming (ANS) subsystem is a dynamics, guidance, navigation, and control software unit based on commercial-off-the-shelf avionics, which is distributed and deployed on a cluster of cooperative nanosatellites to enable future exploration missions to near-Earth objects (NEOs). ANS allows multiple nanosatellites to act together as a single large spacecraft through radio-frequency (RF) cross-links, optical navigation, and low-thrust control. In particular, ANS-equipped nanosatellites can utilize images of a NEO taken from multiple viewpoints to achieve stereo-vision capabilities and characterize the target body’s shape, gravity field, and dynamical properties. All this is enabled by the fusion of major advances to the state of the art in the astrodynamics of relative motion, RF and vision-based navigation, as well as low-thrust control.

Simone D'Amico↗
NASA NTRS2015

Global Precipitation Measurement Mission Launch and Commissioning

During launch and early operation of the Global Precipitation Measurement (GPM) Mission, the Guidance, Navigation and Control (GNC) analysis team encountered four main on orbit anomalies. These include: (1) unexpected shock from Solar Array deployment, (2) momentum buildup from the Magnetic Torquer Bars (MTBs) phasing errors, (3) transition into Safehold due to albedo-induced Course Sun Sensor (CSS) anomaly, and (4) a flight software error that could cause a Safehold transition due to a Star Tracker occultation. This paper will discuss ways GNC engineers identified and tracked down the root causes. Flight data and GNC on board models will be shown to illustrate how each of these anomalies were investigated and mitigated before causing any harm to the spacecraft. On May 29, 2014, GPM was handed over to the Mission Flight Operations Team after a successful commissioning period. Currently, GPM is operating nominally on orbit, collecting meaningful scientific data that will significantly improve our understanding of the Earth's climate and water cycle.

Guidance Navigation and Control↗
NASA NTRS1976

Postflight analysis for Delta Program Mission no. 113: COS-B Mission

On 8 August 1975, the COS-B spacecraft was launched successfully from the Western Test Range (Delta Program Mission No. 113). The launch vehicle was a three stage Extended Long Tank Delta DSV-3P-11B vehicle. Postflight analyses performed in connection with flight are presented. Vehicle trajectory, stage performance, vehicle reliability and the propulsion, guidance, flight control, electronics, mechanical and structural systems are evaluated.

Source record↗
NASA NTRS2018

Considerations for Implementing Voice-Controlled Spacecraft Systems Through a Human-Centered Design Approach

As computational power and speech recognition algorithms improve, the consumer market will see better-performing speech recognition applications. The cell phone and Internet-related service industry have further enhanced speech recognition applications using artificial intelligence and statistical data-mining techniques. These improvements to speech recognition technology (SRT) may one day help astronauts on future deep space human missions that require control of complex spacecraft systems or spacesuit applications by voice. Though SRT and more advanced speech recognition techniques show promise, use of this technology for a space application such as vehicle/habitat/spacesuit requires careful considerations. There are still recognition challenges to overcome such as background noise, human speech variability, and task loading. However, implemented correctly, a voice-controlled spacecraft system (VCSS) can provide a useful, natural and efficient form of human-machine communications during complex tasks such as when the hands and eyes are busy or as an aid for vehicle situational awareness inquiries or collaborative human-robot tasks. This document provides considerations and guidance for the use of SRT in VCSS applications for space missions, specifically in command-and-control (C2) applications where the commanding is user-initiated. First, current SRT limitations as known at the time of this report are given. Then, highlights of SRT used in the space program provide the reader with a history of some of the human spaceflight applications and research. Next, an overview of the speech production process and the intrinsic variations of speech are provided. Finally, general guidance and considerations are given for development of a VCSS using a human-centered design approach for space applications that includes vocabulary selection and performance testing, as well as VCSS considerations for C2 dialogue management design, feedback, error handling, and evaluation/usability testing. Available from

Salazar, George A.↗
NASA NTRS2024

Looking to the Future: A Call to Action for Advanced GNC Algorithm Verification and Validation

Future space systems will rely on autonomous Guidance, Navigation, and Control (GNC) functions to efficiently manage safe and precise self-directed operations in uncertain complex environments. Fundamentally, the GNC system plays a key role in mission performance and safety because it computes the ideal trajectory (Guidance), determines the actual trajectory (Navigation), and executes the ideal trajectory (Control) of a vehicle’s position and attitude. Our current GNC systems are highly automated and already have a high degree of complexity. As missions become more ambitious, GNC systems for launch vehicles and space platforms (e.g., spacecraft, probes, and landers) will require higher levels of performance and autonomous operation than previously encountered, for example, this includes GNC for optimizing aerodynamic and/or propulsion performance during planetary entry. This GNC Verification and Validation (V&V) paper highlights concerns with what undoubtedly will be a trend towards increased complexity as fully autonomous GNC systems are developed for future space missions. Clearly, complex GNC systems pose challenges in the prelaunch V&V phase, which is a relatively expensive part of a mission’s life cycle. Essentially the V&V phase is focused on checking that the system effectively meets all the design and operational requirements for the mission. The authors of this paper (i.e., the Inter-Agency Working Group of GNC subject matter experts) focused on this fundamental question over the past few years: Will the GNC engineering community of practice be sufficiently prepared to perform the necessary V&V on evolving GNC architectures that are driven by very demanding requirements for autonomy, resiliency, reconfigurability, adaptability, and mission cost-benefit balance? It is the viewpoint of our Inter-Agency team that the GNC V&V approaches and processes needed to address the next generation of complex GNC systems, which likely will employ various forms of modern GNC technology, are not currently established to the level the community will need in the future. While researchers and practitioners have made some progress in developing new GNC V&V methods for modern GNC systems, a good deal of work remains to be done to codify such methods in a comprehensive and systematic manner. Thus, the Inter-Agency team’s partner organizations [the National Aeronautics and Space Administration (NASA), the European Space Agency (ESA), the National Centre for Space Studies (CNES), the German Aerospace Center (DLR), the French Aerospace Lab (ONERA), and ISAE-SUPAERO] have conducted preliminary investigations into advancing GNC V&V techniques, which resulted in the identification of the need for education, new V&V tools, and benchmark problems for the GNC community. The necessary proactive steps to be taken to meet the challenges and fill the gaps in GNC V&V are summarized in this paper. The first steps include identifying advanced analysis tools, developing a GNC V&V roadmap, and expanding education and training programs for GNC practitioners. This paper is a call to action and proposes a comprehensive set of recommended actions for all our stakeholders: space agencies, researchers, and industry.

Samir Bennani↗
NASA NTRSDate not supplied

Celestial Navigation in Cislunar Space with autoNGC

Celestial navigation (CelNav) is a source of navigation observables where images of known solar system bodies are used to locate a spacecraft, beneficial within the solar system for both cislunar and deep space missions. CelNav provides a variety of design benefits to support and enable current and new autonomous space operations- using only a camera and a processor to produce in-situ measurements for navigation. This technology reduces subscription to ground-based tracking during all phases of a mission, freeing up resources for other operational needs. This also supports secure navigation since it eliminates the need for ground contact. CelNav enables missions where the light time delay between Earth and the spacecraft is too long (or the Earth to spacecraft line of sight is obscured) to support critical operations. It also enables smaller mission classes, where Deep Space Network (DSN)time is cost prohibitive, to reduce its cost by focusing primarily on data downlink. Finally, it enables the NASA Artemis program and other cislunar human space flight by providing redundant navigation to traditional radiometric tracking. In this presentation, we discuss the implementation of a CelNav app in autonomous Navigation, Guidance, and Control (autoNGC), a comprehensive flight software suite for onboard autonomy that is built on the core Flight System (cFS). The presentation also summarizes the results of flight software-in-the-loop (SIL) and processor-in-the-loop (PIL) demonstrations. Both are high-fidelity simulations with the use of a camera emulator hosted on a GPU server that simulates images that would be captured by the camera. The CelNav app leverages the use of cGIANT (cFS Goddard Image Analysis and Navigation Tool).Previously developed for the autoNGC software suite, cGIANT is an onboard autonomous image processing and optical navigation (OpNav) tool that performs limb-based OpNav and Terrain Relative Navigation. The added CelNav capability of cGIANT generates bearing measurements to multiple known celestial bodies (planets, moons, asteroids, comets, etc.) in monocular (2D) images. These observables are then fed to the Goddard Enhanced Onboard Navigation System (GEONS)navigation filter app, enabling us to navigate the spacecraft autonomously. In early 2025, the autoNGC CelNav capability is planned to be flight tested as part of the onboard autonomy experiment on the Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment(CAPSTONE) spacecraft that is currently in a Lunar Near Rectilinear Halo Orbit(NRHO).

celestial navigation↗
NASA NTRS2015

Global Precipitation Measurement Mission Launch and Commissioning

During launch and early operation of the Global Precipitation Measurement (GPM) Mission, the Guidance, Navigation, and Control (GN&C) analysis team encountered four main on-orbit anomalies. These include: (1) unexpected shock from Solar Array deployment, (2) momentum buildup from the Magnetic Torquer Bars (MTBs) phasing errors, (3) transition into Safehold due to albedo induced Course Sun Sensor (CSS) anomaly, and (4) a flight software error that could cause a Safehold transition due to a Star Tracker occultation. This paper will discuss ways GN&C engineers identified the anomalies and tracked down the root causes. Flight data and GN&C on-board models will be shown to illustrate how each of these anomalies were investigated and mitigated before causing any harm to the spacecraft. On May 29, 2014, GPM was handed over to the Mission Flight Operations Team after a successful commissioning period. Currently, GPM is operating nominally on orbit, collecting meaningful scientific data that will significantly improve our understanding of the Earth's climate and water cycle.

Guidance Navigation and Control↗
NASA NTRS1971

Design study for a high reliability five-year spacecraft tape transport

Following the establishment of the overall transport concept, a study of all of the life limiting constraints associated with the transport were analyzed using modeling techniques. These design techniques included: (1) a response analysis from which the performance of the transport could be determined under operating conditions for a variety of conceptual variations both in a new and aged condition; (2) an analysis of a double cone guidance technique which yielded an optimum design for maximum guidance with minimum tape degradation; (3) an analysis of the tape pack design to eliminate spoking caused by negative tangential stress within the pack; (4) an evaluation of the stress levels experienced by the magnetic tape throughout the system; (5) a general review of the bearing and lubrication technology as applied to satellite recorders and hence the recommendation for using standard load carrying antifriction ball bearings; and (6) a kinetic analysis to determine the change in kinetic properties of the transport during operation.

Benn, G. S. L.↗