Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Spatially Resolved Raman Spectroscopy of Thin Carbon Interphase in SiC Ceramic Matrix Composites

A dedicated analysis method is presented to extract the Raman spectrum of an interphase layer thinner than the laser spot size. We focused on spatial correlations between the contrast of optical micrographs and Raman hyperspectral data to predict the constituents of the mixed spectra measured near the interphase. By employing a mapping step size of 0.1 μm, the Raman spectrum of approximately 0.3-μm-thick carbon interphase in a SiC fiber-reinforced SiC matrix composite was extracted from data acquired with a theoretical spot size of about 0.7 μm. Notably, conventional chemometrics procedures were unable to isolate the interphase signal, instead producing a spectrum representing a mixture of interphase and matrix. This study used another composite with approximately 0.9-μm-thick interphase to validate the analysis method, enabling direct measurement of the interphase spectrum. The proposed Raman analysis method has advantages in specimen volume and turnaround time compared to traditional characterization methods, such as transmission electron microscopy. In conclusion, this study also evaluates the applicability of the analysis method to different composite materials and identifies key requirements of the measurements, including the ratio of interphase thickness to spot size and the homogeneity of the surrounding matrix.

ceramic matrix composite↗

3D Coded SUMMA: Communication-Efficient and Robust Parallel Matrix Multiplication

In this paper, we propose a novel fault-tolerant parallel matrix multiplication algorithm called 3D Coded SUMMA that achieves higher failure-tolerance than replication-based schemes for the same amount of redundancy. This work bridges the gap between recent developments in coded computing and fault-tolerance in high-performance computing (HPC). The core idea of coded computing is the same as algorithm-based fault-tolerance (ABFT), which is weaving redundancy in the computation using error-correcting codes. In particular, we show that MatDot codes, an innovative code construction for parallel matrix multiplications, can be integrated into three-dimensional SUMMA (Scalable Universal Matrix Multiplication Algorithm [30]) in a communication-avoiding manner. To tolerate any two node failures, the proposed 3D Coded SUMMA requires ~50% less redundancy than replication, while the overhead in execution time is only about 5–10%.

97 MATHEMATICS AND COMPUTING↗

Extended JT supergravity and random matrix models: The power of the string equation

A number of supersymmetric Jackiw-Teitelboim (JT) gravity theories are known to be described (in the Euclidean path integral formulation) by double-scaled random matrix models. Such matrix models can be characterized using a certain “string equation”. It was shown recently that in extended supergravity, when the number of BPS states scales as e$^{S_0}$, where $S_0$ is the extremal entropy, a special ansatz for the leading order solution of the string equation yields the supergravity spectrum. Somewhat miraculously, the construction showed that the functional form of the non-BPS (continuum) sector predicts the precise form of the BPS sector, showing the robustness of the supergravity/matrix-model correspondence. In this paper, we refine the analysis and show that the string equation, combined with some simple requirements on solutions, are powerful tools for constraining the spectrum of extended JT supergravity theories. We re-explore the cases of $\mathcal{N} = 2$ and (small) $\mathcal{N} = 4$ JT supergravity, and then explore the new cases of spectra from $\mathcal{N} = 3$ and $\mathcal{N} = 4$ large JT supergravity (recently derived by Heydeman, Shi, and Turiaci) showing that our approach also works naturally for (nearly) all the models. Based on this success, we conjecture that these new supergravity models also have matrix model descriptions.

Extended Supersymmetry↗

Thermal bootstrap of matrix quantum mechanics

We implement a bootstrap method that combines stationary state conditions, thermal inequalities, and semidefinite relaxations of matrix logarithm in the ungauged one-matrix quantum mechanics, at finite rank N as well as in the large N limit, and determine finite temperature observables that interpolate between available analytic results in the low and high temperature limits respectively. We also obtain bootstrap bounds on thermal phase transition as well as preliminary results in the ungauged two-matrix quantum mechanics.

1/N Expansion↗

Microstructure in matrix elements

We investigate the simple model of Pennington, Shenker, Stanford and Yang for modeling the density matrix of Hawking radiation, but further include dynamics for EOW branes behind the horizon. This allows interactions that scatter one interior state to another, and also allows EOW loops. At strong coupling, we find that EOW states are no longer random; the ensemble has collapsed, and coupling constants encode the microscopic matrix elements of Hawking radiation. This suggests strong interior dynamics are important for understanding evaporating black holes, without any ensemble average. In this concrete model the density matrix of the radiation deviates from the thermal state, small off-diagonal fluctuations encode equivalences between naively orthogonal states, and bound the entropy from above. For almost evaporated black holes the off-diagonal terms become as large as the diagonal ones, eventually giving a pure state. We also find the unique analytic formula for all Renyi entropies.

2D gravity↗

Soft gravitons in the BFSS matrix model

BFSS proposed that asymptotically flat M-theory is dual to a large N limit of the matrix quantum mechanics describing N nonrelativistic D0-branes. Recent insights on the soft symmetries of any quantum theory of gravity in asymptotically flat space are applied to the BFSS matrix model. It is shown that soft gravitons are realized by submatrices whose rank is held fixed in the large N M-theory limit, rather than the usual linear scaling with N for hard gravitons. The soft expansion is identified with the large N expansion and the soft theorem becomes a universal formula for the quantum mechanical scattering of such submatrix excitations. This formula is shown to be the Ward identity of large type IIA U(1) RR asymptotic gauge symmetry in the matrix model, whose asymptotic boundaries are at future and past timelike infinity.

1/N Expansion↗

Characterizing Topological Order with Matrix Product Operators

One of the most striking features of gapped quantum phases that exhibit topological order is the presence of long-range entanglement that cannot be detected by any local order parameter. The formalism of projected entangled-pair states is a natural framework for the parameterization of gapped ground state wavefunctions which allows one to characterize topological order in terms of the virtual symmetries of the local tensors that encode the wavefunction. In their most general form, these symmetries are represented by matrix product operators acting on the virtual level, which leads to a set of algebraic rules characterizing states with topological quantum order. This construction generalizes the concepts of $\mathsf G$- and twisted injectivity; the corresponding matrix product operators encode all topological features of the theory and provide a complete picture of the ground state manifold on the torus. We show how the string-net models of Levin and Wen fit within this formalism and in doing so provide a particularly intuitive interpretation of the pentagon equation for F-symbols as the pulling of matrix product operators through the string-net tensor network. Our approach paves the way to finding novel topological phases beyond string nets and elucidates the description of topological phases in terms of entanglement Hamiltonians and edge theories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tribological Properties of NiAl Matrix Composites Filled with Serpentine Powders

The unexplored tribological properties of NiAl matrix composites filled with serpentine powders are investigated using a reciprocating ball-on-disk configuration. Tribological test results reveal that increasing the serpentine concentration to some extent reduces the friction coefficients and wear rates of the composites. The best anti-friction and anti-wear performance is displayed by the NiAl matrix composite filled with 8 wt.% serpentine and 2 wt.% TiC (NAST). Microstructural analyses demonstrate that after adding serpentine, the self-lubricating films with different percentages of coverage form on the worn surfaces of the composites. A self-lubricating film with the highest percentage of coverage smears on the worn surface of NAST. This clearly suggests that serpentine can act as a new type of filler for NiAl matrix composites, whereas a combination of serpentine and TiC can enable serpentine to provide a full play to its excellent lubricating performance.

36 MATERIALS SCIENCE↗

High Wear-Resistant Aluminum Matrix Composite Layer Fabricated by MIG Welding with Lateral B{sub 4}C Powder Injection

In this work, a low-cost technique combining MIG welding and lateral powder injection was developed to fabricate B{sub 4}C particles-reinforced aluminum matrix composite (AMC) layer on a T6 heat-treated 7075 aluminum alloy (AA7075-T6) substrate. The AMC layer was 6-7 mm thick and well bonded to the substrate. The B{sub 4}C particles were dispersed throughout the AMC layer with an average content of approximately 7 vol.%. No significant reaction products existed either at the particle–matrix interface or in the Al-matrix. In pin-on-disk dry sliding wear tests against Al{sub 2}O{sub 3} grinding wheels, the AMC layer exhibited excellent wear resistance with volume wear rate approximately 1/10-3/10 that of the quenched AISI 1045 steel and only approximately 2-7% that of the AA7075-T6 alloy under the same wear conditions. A small addition of ceramic particles can greatly improve wear resistance, suggesting that this technique has good prospects for a wide variety of applications.

36 MATERIALS SCIENCE↗

Additive manufacturing enabled synergetic strengthening of bimodal reinforcing particles for aluminum matrix composites

An additive manufactured TiB 2 /Al-Cu-Mg-Ni composite with a minor amount of Sc was fabricated by laser powder bed fusion (LPBF). The composite shows a yield strength of ~370 MPa, almost doubling the strength of its wrought matrix counterpart, and an elongation of ~7 %. The superior mechanical properties are attributed to a unique micro-nano hierarchical microstructure, consisting of nanoscale and microscale TiB 2 particles dispersed in a matrix of fine aluminum grains (3 µm) together with intragranular intermetallic nanoparticles and nano-cellular networks (cell size 30 nm). The formation of the TiB 2 nanoparticles is the consequence of partial dissolution of the TiB 2 particulates and the enrichment of Sc in the newly formed nanoparticles. Remarkable strengthening effects are achieved by the bimodal TiB 2 particles, intermetallic nanoparticles and intragranular nano-cellular networks. Finally, this study provides new insights into the role of additive manufacturing in tailoring the microstructure of particulate reinforced metal matrix composites (MMCs) with advanced properties.

36 MATERIALS SCIENCE↗

J-matrix method of scattering in one dimension: The nonrelativistic theory

We formulate a theory of nonrelativistic scattering in one dimension based on the J-matrix method. The scattering potential is assumed to have a finite range such that it is well represented by its matrix elements in a finite subset of a basis that supports a tridiagonal matrix representation for the reference wave operator. Contrary to our expectation, the 1D formulation reveals a rich and highly nontrivial structure compared to the 3D formulation. Examples are given to demonstrate the utility and accuracy of the method. It is hoped that this formulation constitutes a viable alternative to the classical treatment of 1D scattering problem and that it will help unveil new and interesting applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The S-matrix for surface boundary states: An application to photoemission for Weyl semimetals

We present a new theory of photoemission for Weyl semimetals. We derive this theory using a model with a boundary surface at z=0. Due to the boundary, the self adjoint condition needs to be verified in order to ensure physical solutions. The solutions are given by two chiral zero modes which propagate on the boundary. Due to the Coulomb interaction, the chiral boundary model is in the same universality class as interacting graphene. The interactions cause a temperature dependence of the velocity and life time. Using the principle of minimal coupling, we identify the electron–photon Hamiltonian. The photoemission intensity is computed using the S-matrix formalism. The S-matrix is derived using the initial photon state, the final state of a photoelectron and a hole in the valence band. The photoemission reveals the final valence band dispersion ħv(±k{sub y}−k{sub 0})+ħΩ after absorbing a photon of frequency Ω (k{sub 0} represents the shift in the momentum due to the crystal potential). The momentum in the z direction is not conserved, and is integrated out. As a result, the scattering matrix is a function of the parallel momentum . We observe two dimensional contours, representing the “Fermi arcs”, which for opposite spin polarization have opposite curvature. This theory is in agreement with previous experimental observations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Parametrizations of the spin density matrix

Highlights: • Proposed two methods for parametrizing the SDM of spinning, unstable particles. • All non-negativity conditions fulfilled; adaptability to various constraints. • First method: based on a theorem; applicable in a simple and flexible way. • Second method: particularly suitable for especial conditions. • Applications: two of them interesting in the search for new physics. We propose for the spin density matrix two parametrizations which automatically fulfill the non-negativity conditions, without setting any bound on the parameters. The first one relies on a theorem, that we prove, and it is rather simple and easily adaptable to some specific reactions, where, for example, parity is conserved or angular momentum conservation entails selection rules. Moreover, in the case when the rank is less than the order of the density matrix, we show how to improve the fits to the data, either by implementing previous suggestions, or by elaborating an alternative method, for which we prove a second theorem. Our second parametrization is a variant of previous treatments, it appears suitable for some particular processes. Moreover, we discuss about the possibility of inferring the elements of the density matrix from the differential decay width. Last, we illustrate various examples of current interest, both in strong and weak decays; some of them may be helpful in the investigation of physics beyond the standard model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Automodification of PARP-1 mediates its tight binding to the nuclear matrix

Poly(ADP-ribose) polymerase-1 (PARP-1), a nuclear enzyme that catalyzes the NAD{sup +}-dependent addition of ADP-ribose polymers on a variety of nuclear proteins, has been shown to be associated with the nuclear matrix. As yet, the properties and conditions of this association are unclear. Here, we show the existence of two PARP-1 pools associated with the nuclear matrix of rat liver and the ability of PARP-1 automodification to facilitate its binding to the nuclear matrix.

60 APPLIED LIFE SCIENCES↗

On-matrix Derivatization for Dynamic Headspace Sampling of Nonvolatile Surface Residues

The goal of this study is to extend sampling by the field and laboratory emission cell (FLEC) purge-and-trap technique to applications that target nonvolatile residues. On-matrix derivatization of residues to render analytes stable and more volatile is explored to achieve this goal. Results show that on-matrix derivatizations of nerve agent hydrolysis products (monoalkyl methylphosphonic acids and methylphosphonic acid [MPA]) with diazomethane were successful on glass and painted wallboard (at the 10-µg level). It also was successful on the more difficult concrete (at the 500-µg level) and carpet (at the 20-µg level) substrates that cannot be successfully sampled using swipe techniques. Analysis of additional chemical warfare (CW)-associated residues can be approached by on-matrix derivatization with trifluoroacetic anhydride (TFAA). For example, amines (used as stabilizers or present as decomposition products of the nerve agent VX) or thiodiglycol (hydrolysis product of sulfur mustard) could be sampled as their TFAA derivatives from glass, painted wallboard, and concrete (at the 40-µg level), as well as carpet (at the 80-µg level) surfaces. Although the amine and thiodiglycol are semi-volatile and could be sampled directly, derivatization improves the recovery and chromatographic behavior of these analytes.

On-matrix derivatization, in-situ derivatization, ↗

Matrix-free subcell residual distribution for Bernstein finite element discretizations of linear advection equations

In this work, we introduce a new residual distribution (RD) framework for the design of bound-preserving high-resolution finite element schemes. The continuous and discontinuous Galerkin discretizations of the linear advection equation are modified to construct local extremum diminishing (LED) approximations. To that end, we perform mass lumping and redistribute the element residuals in a manner which guarantees the LED property. The hierarchical correction procedure for high-order Bernstein finite element discretizations involves localization to subcells and definition of bound-preserving weights for subcell contributions. Using strong stability preserving (SSP) Runge–Kutta methods for time integration, we prove the validity of discrete maximum principles under CFL-like time step restrictions. The low-order version of our method has roughly the same accuracy as the one derived from a piecewise (multi)-linear approximation on a submesh with the same nodal points. In high-order extensions, we use an element-based flux-corrected transport (FCT) algorithm which can be interpreted as a nonlinear RD scheme. The proposed LED corrections are tailor-made for matrix-free implementations which avoid the rapidly growing cost of matrix assembly for high-order Bernstein elements. The results for 1D, 2D, and 3D test problems compare favorably to those obtained with the best matrix-based approaches.

97 MATHEMATICS AND COMPUTING↗

Failure of brittle micro-spherical shells embedded in elastomer matrix under indentation

Silicone elastomer filled with glass micro balloons (GMB) is an elastomeric syntactic foam used in electronics and component packaging for encapsulation, potting, stress-relief layer, and electrical insulation purposes. Under mechanical loading, the reinforcing phase, namely the GMBs embedded in the elastomer matrix, may break or delaminate, leading to internal damage and macroscale stiffness degradation, which can alter the material's protective capacity against mechanical shock and vibration. The degree of damage is controlled by the loading history, delamination, and failure behavior of the GMBs. In this work, we investigate the GMB failure behavior in this work wherein we present an indentation experiment to measure the force required to fail individual GMBs that are either embedded in the elastomer matrix or adhered to the surface of an elastomer layer. The indentation apparatus is augmented with an inverted optical microscope to enable in situ imaging of the GMB. Failure modes for the embedded or non-embedded GMBs are discussed based on the morphology of the broken GMBs and the measured failure forces. We also measure the adhesion energy between the glass balloon and the elastomer, based on which the possibility of delamination between the GMB and the surrounding elastomer matrix during the failure process is evaluated. Our results can facilitate the development of a failure criterion of GMBs which is necessary for establishing a physics-based constitutive model to describe the macroscopic damage mechanics of elastomeric syntactic foams.

42 ENGINEERING↗