Design and performance of a combined radiative- convective heating facility
Combined radiative-convective heating test facility for atmospheric entry simulation
Gowen, F. E.↗
SEARCH · Engineering Papers
Results for “Radiation Testing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Effect of slot width on transition and noise attenuation of a flat sound shield in a Mach 6 wind tunnel
An experimental and theoretical study of a sound shield concept to attenuate the noise radiated into the test section from the turbulent boundary layer on the walls of wind tunnels was conducted. The model investigated was planar with a sharp flat plate leading edge faired into an array of rods aligned nearly parallel to the local flow. For a ratio of gap diameter to rod diameter of 0.16, the flow was laminar over the entire model at a maximum local length Reynolds number of 14 million. A 45% reduction in the tunnel free stream root mean square pressure level was measured within the shielded region for this gap width when the boundary layers on the rods were laminar. Smaller ratios of gap diameter to rod diameter resulted in substantial reductions in the transition Reynolds number, and in a 40% pressure reduction.
Stainback, P. C.↗
Multiplexer/demultiplexer flexibility enhancement program
This final report summarizes the accomplishments of the NASA/JSC MDM Flexibility Enhancement Program, Contract NAS9-15359 as carried out by Sperry Flight Systems from April through December 1977. Included are discussions of major statement of work tasks and the results, conclusions and recommended actions. All tasks called out in the amended SOW were carried out. Significant development tasks which were completed included the following: (1) Development, breadboard and test of a Pulse Output 28-volt Module. (2) Development and test of a 32-channel DC Analog Input (DCIN) Differential Module. (3) Development and test of a sequence memory module using an M2708 EPROM which can be programmed in the unit. (4) Development and test of a radiator top cover for a radiation-cooled Flexible MDM.
Source record↗
Heat pipe radiators for space
An optimized flight-weight prototype fluid-header panel (heatpipe radiator system) was tested in a vacuum environment over a wide range of coolant inlet temperatures, coolant flow rates, and environmental absorbed heat fluxes. The maximum performance of the system was determined. Results are compared with earlier data obtained on a smaller fluid-header feasibility panel, and computer predictions. Freeze-thaw tests are described and the change in thaw recovery time due to the addition of a low-freezing point feeder heat pipe is evaluated. Experimental panel fin-temperature distributions are compared with calculated results.
Sellers, J. P.↗
UHF coplanar-slot antenna for aircraft-to-satellite data communications
A lightweight low drag coplanar slot antenna was developed for use on commercial jet aircraft that will provide upper hemisphere coverage in the UHF band at frequencies of 402 and 468 MHz is described. The antenna is designed to transmit meteorological data from wide body jet aircraft to ground users via synchronous meteorological data relay satellites. The low profile antenna (23.5 cm wide by 38.1 cm long slot by 1.9 cm high) is a conformal antenna utilizing the coplanar approach with the advantages of broad frequency bandwidth and improved electrical integrity over wide range of temperature. The antenna is circular polarized, has anon axis gain of near +2.5 dB, and a HPBW greater than 90 deg. Areas discussed include antenna design, radiation characteristics, flight testing, and system performance.
Myhre, R. W.↗
Report of Optical Radiometric Instruments and Calibration Panel
Measurement and accuracy needs for remote sensing are analyzed. Topics discussed include: (1) in orbit performance degradation due to contamination; (2) increased radiometric accuracy required for detecting small changes over long periods of time in environmental parameters; (3) references for verifying calibration in orbit; (4) high attenuation neutral density filters; (5) the sun as a radiation source for testing; (6) rejection of stray light; (7) development of spectrally flat detectors for flight sensors; and (8) long term stability of sensor components.
Source record↗
Solar wind and magnetosphere interactions
The relationship between the magnetosphere and the solar wind is addressed. It is noted that this interface determines how much of the solar plasma and field energy is transferred to the Earth's environment, and that this coupling not only varies in time, responding to major solar disturbances, but also to small changes in solar wind conditions and interplanetary field directions. It is recommended that the conditions of the solar wind and interplanetary medium be continuously monitored, as well as the state of the magnetosphere. Other recommendations include further study of the geomagnetic tail, tests of Pc 3,4 magnetic pulsations as diagnostics of the solar wind, and tests of kilometric radiation as a remote monitor of the auroral electrojet.
Russell, C. T.↗
UHF coplanar-slot antenna for aircraft-to-satellite data communications
The initiative for starting the Aircraft-to-Satellite Data Relay (ASDAR) Program came from a recognition that much of the world's weather originates in the data sparse area of the tropics which are primarily ocean. The ASDAR system consists of (1) a data acquisition and control unit to acquire, store and format these data; (2) a clock to time the data sampling and transmission periods; and (3) a transmitter and low-profile upper hemisphere coverage antenna to relay the formatted data via satellite to the National Weather Service ground stations, as shown schematically. The low-profile antenna is a conformal antenna based on the coplanar-slot approach. The antenna is circular polarized and has an on-axis gain of nearly 2.5 dB and a HPBW greater than 90 deg. The discussion covers antenna design, radiation characteristics, flight testing, and system performance.
Myhre, R. W.↗
Atmospheric Effects on Remote Sensing of the Earth's Surface
The main causes and magnitude of the atmospheric effects on remote sensing of the Earth's surface are determined. Theoretical study as well as measurements are included. The knowledge gained from this study will be used to develop atmospheric correction algorithms and to test them with satellite data. In a theoretical investigation of the relative effects of the aerosol optical thickness, absorption, and size distribution on remote sensing, it was found that aerosol absorption has a significant effect on satellite measurements of surface reflectivity. The absorption effect is stronger for high than for low surface reflectances. The aerosol optical thickness is dominant for small surface reflectances. The accuracy of clustering algorithms depends on both parameters. The vegetation index, however, is affected by the optical thickness but only weakly affected by the absorption. A laboratory simulation of the atmospheric effect on the radiance of sunlight scattered from the Earth's surface-atmosphere system was performed. This experiment verified the existence of the adjacency effect (the effect of a bright field on the radiance detected above a dark field) and was used to test 3-D radiative transfer models. In a theoretical study it was found that atmospheric scattering resulting from the adjacency effect reduces the separability between surface classes.
Fraser, R. E.↗
Estimating Crop Yields From Multispectral Reflectance
Three reports describe research on proposed method for estimating crop yields by combining meteorological data with satellite measurements of reflected radiation to estimate crop-absorbed radiation. Concept, when tested over large areas, forms basis for evaluating crop conditions and estimating yields over regions where ground observations too costly or too difficult.
Daughtry, C.↗
More on Effects of Radiation on Electronics
Third volume in series of bibliographies on radiation effects on electronics covers years 1982 and 1983. Volume summarizes literature on effects of total doses of radiation and of test environments.
Bouquet, Frank L.↗
Magnetic emissions testing of the space station engineering model resistojet
The engineering model resistojet intended for altitude maintenance onboard the space station was tested for magnetic radiation emissions in the Radio Frequency Interference (RFI) facility at the Goddard Space Flight Center. The resistojet heater was supplied with power at 20 kHz and low voltage through a power controller. The resistojet was isolated from its power supply in the RFI enclosure, and the magnetic emission measured at three locations around the resistojet at various heater currents. At a heater current of 18.5 A the maximum magnetic emission was 61 dBpt at a distance of 1 m from the resistojet and at a location at the rear of the thruster. Calculations indicate that the case and heat shields provided a minimum of 4 dB of attenuation at a current of 18.5 A. Maximum radiation was measured at the rear of the resistojet along its major axis and was thought to be due to the magnetic radiation from the power leads. At a distance of 37 cm from the resistojet the maximum magnetic radiation measured was 73 dBpt at a current of 11.2 A. The power input leads were also a source of magnetic radiation. The engineering model rssistojet requires about 20 dB of additional shielding.
Briehl, Daniel↗
Determining gravitational radiation from Newtonian self-gravitating systems
Quadrupole gravitational radiation formulas are tested and compared in a calculation of rotating stellar core collapse. While the standard quadrupole formula (SQF) allows an economical calculation of the waveform in postlinear gravity, it has several shortcomings that become apparent in a finite difference (FD) calculation. These shortcomings are related to the large-moment arm of the quadrupole moment and the two (numerical) time derivatives that separate it from the waveform. These shortcomings lead to high-frequency noise in the SQF waveform. Several alternatives to the SQF are developed. Each is mathematically equivalent to the SQF and applicable to self-gravitating sources. For FD calculations, the new quadrupole formulas are all superior to the SQF and capable of producing waveforms free of the high-frequency noise characteristics of its use.
Finn, Lee Samuel↗
Low cost space power generation
The success of this study has given a method of fabricating durable copolymer films without size limitations. Previously, only compression molded samples were durable enough to generate electrical energy. The strengthened specimens are very long lived materials. The lifetime was enhanced at least a factor of 1,300 in full pyroelectric conversion cycle experiments compared with extruded, non-strengthened film. The new techniques proved so successful that the lifetime of the resultant copolymer samples was not fully characterized. The lifetime of these new materials is so long that accelerated tests were devised to probe their durability. After a total of more than 67 million high voltage electrical cycles at 100 C, the electrical properties of a copolymer sample remained stable. The test was terminated without any detectable degradation to allow for other experiments. One must be cautious in extrapolating to power cycle performance, but 67 million electrical cycles correspond to 2 years of pyroelectric cycling at 1 Hz. In another series of experiments at reduced temperature and electrical stress, a specimen survived over one-third of a billion electrical cycles during nearly three months of continuous testing. The radiation-limited lifetimes of the copolymer were shown to range from several years to millions of years for most earth orbits. Thus, the pyroelectric copolymer has become a strong candidate for serious consideration for future spacecraft power supplies.
Olsen, Randall B.↗
The Geologic Remote Sensing Field Experiment (GRSFE)
Field measurements for the Geologic Remote Sensing Field Experiment (GRSFE) were concentrated in the Lunar Lake area of Nevada. The GRSFE data are meant to be used in a variety of investigations, including tests of multispectral radiative transfer models for scattering and emission from planetary surfaces in support of the Earth Observing System (EOS), Mars Observer, and Magellan Missions. Studies will also be pursued to establish the neotectonic and paleoclimatic history of the arid southwestern United States. The data will also be used to support Mars Rover Sample Return (MRSR) simulation studies.
Dale-Bannister, Mary A.↗
STS-44 Space Shuttle mission report
The STS-44 Space Shuttle Program Mission Report is a summary of the vehicle subsystem operations during the forty-fourth flight of the Space Shuttle Program and the tenth flight of the Orbiter vehicle Atlantis (OV-104). In addition to the Atlantis vehicle, the flight vehicle consisted of the following: an External Tank (ET) designated as ET-53 (LWT-46); three Space Shuttle main engines (SSME's) (serial numbers 2015, 2030, and 2029 in positions 1, 2, and 3, respectively); and two Solid Rocket Boosters (SRB's) designated as BI-047. The lightweight redesigned Solid Rocket Motors (RSRM's) installed in each one of the SRB's were designated as 360L019A for the left SRB and 360W019B for the right SRB. The primary objective of the STS-44 mission was to successfully deploy the Department of Defense (DOD) Defense Support Program (DSP) satellite/inertial upper stage (IUS) into a 195 nmi. earth orbit at an inclination of 28.45 deg. Secondary objectives of this flight were to perform all operations necessary to support the requirements of the following: Terra Scout, Military Man in Space (M88-1), Air Force Maui Optical System Calibration Test (AMOS), Cosmic Radiation Effects and Activation Monitor (CREAM), Shuttle Activation Monitor (SAM), Radiation Monitoring Equipment-3 (RME-3), Visual Function Tester-1 (VFT-1), and the Interim Operational Contamination Monitor (IOCM) secondary payloads/experiments.
Fricke, Robert W.↗
Infrared radiative properties of rapidly cooling, initially molten Al2O3 particles
A shock tube technique was used to investigate the effects of rapid cooling of molten Al2O3 particles on their radiative signatures below the melt. Optically thin clouds of submicron Al2O3 particles in an Ar bath were shock-heated and then quench-cooled by a rarefaction wave. Visible pyrometry monitored the temperature history of the particles and infrared detectors quantified the IR signatures at several wavelengths. Data analysis gave values of the imaginary refractive index, k. As the particles cooled to submelt temperatures (1600 to 2300 K), the values of k remained near 0.1, comparable to the liquid values and several orders of magnitude larger than those for bulk alpha-Al2O3. This results in an enhancement of SWIR radiation by three or more orders of magnitude. These results give strong evidence that a rapid-cooling solidification process is primarily responsible for discrepancies between observed and predicted radiation in SRM tests.
Rawlins, W. T.↗
STS-53 Space Shuttle mission report
The STS-53 Space Shuttle Program Mission Report provides a summary of the Orbiter, External Tank (ET), Solid Rocket Booster/Redesigned Solid Rocket Motor (SRB/RSRM), and the Space Shuttle Main Engine (SSME) subsystems performance during the fifty-second flight of the Space Shuttle Program, and the fifteenth flight of the Orbiter vehicle Discovery (OV-103). In addition to the Orbiter, the flight vehicle consisted of an ET, which was designated as ET-49/LWT-42; three SSME's, which were serial numbers 2024, 2012, and 2017 in positions 1, 2, and 3, respectively; and two SRB's, which were designated BI-055. The lightweight RSRM's that were installed in each SRB were designated 360L028A for the left SRB, and 360L028B for the right SRB. The primary objective of this flight was to successfully deploy the Department of Defense 1 (DOD-1) payload. The secondary objectives of this flight were to perform the operations required by the Glow Experiment/Cryogenic Heat Pipe Experiment Payload (GCP); the Hand-Held, Earth-Oriented, Real-Time, Cooperative, User-Friendly, Location-Targeting and Environmental System (HERCULES); the Space Tissue Loss (STL); the Battlefield Laser Acquisition Sensor Test (BLAST); the Radiation Monitoring Equipment-III (RME-III); the Microcapsules in Space-1 (MIS-1); the Visual Function Tester-2 (VFT-2); the Cosmic Radiation Effects and Activation Monitor (CREAM); the Clouds Logic to Optimize Use of Defense Systems-1A (CLOUDS-1A); the Fluids Acquisition and Resupply Experiment (FARE); and the Orbital Debris Radar Calibration Spheres (ODERACS). In addition to presenting a summary of subsystem performance, this report also discusses each Orbiter, ET, SSME, SRB, and RSRM in-flight anomaly in the applicable section of the report. Listed in the discussion of each anomaly is the officially assigned tracking number as published by each Project Office in their respective Problem Tracking List. All times given in this report are in Greenwich mean time (G.m.t.) as well as mission elapsed time (MET).
Fricke, Robert W., Jr.↗