Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Raman Spectroscopy for the On-Line Analysis of Oxidation States of Oxygen Carrier Particles (Final Report)

The need for cleaner energy systems, including CO 2 capture technologies, is driving the current development of chemical looping technologies such as chemical looping combustion (CLC) and chemical looping gasification (CLG). Specific processes that are under development for using solid fuels are in-situ Gasification Chemical-Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU). Chemical looping is based on using oxygen carriers (e.g., iron oxides, copper oxides, calcium sulfates, etc.) to provide the oxygen for the reaction with the fuel. In order to optimize the overall process performance, it is critical that the properties of the oxygen carriers are well-defined and maintained for their specific purpose during the different stages of the CLC process. One of the critical properties of the oxygen carrier is its oxidation state (e.g., content of Fe 2 O 3 vs. Fe 3 O 4 ) as it affects the fundamental operation of the CLC process. Unfortunately, the ability to make on-line measurements of the oxidation state of oxygen carriers is lacking and new sensors need to be developed. The goal of this project was to evaluate the potential of Raman spectroscopy as a sensor for the on-line analysis of the oxidation state of oxygen carrier particles. Oxygen carrier particles (OCPs) of interest include iron oxides, copper oxides, calcium sulfite, and calcium sulfate, with particle sizes typically less than 0.5 mm diameter. The expected operating conditions of the sensor include OCP temperatures in the range of 800 °C to 1000 °C, and pressures of about 10 atm. We evaluated continuous wave (cw), Quasi cw, pulsed, and time-gated Raman spectroscopy at multiple wavelengths (355 nm, 360 nm, 532 nm, 633 nm, 785 nm). Samples included iron oxides, copper oxides, calcium sulfate, and a custom sample provided by NETL for temperatures beyond 1000 °C. Our findings can be summarized as follows: Calcium sulfate can be detected via cw and pulsed 532 nm Raman spectroscopy at temperatures above 1100 °C.; Hematite (Fe 2 O 3 ) Raman spectra can be detected at temperatures of 700 °C via cw 360 nm, 1089 °C with cw 532 nm, 400 °C with cw 633 and 600 °C with cw 785 nm lasers; Magnetite (Fe 3 O 4 ) can be detected via cw 532 nm Raman spectroscopy up to 600 °C; Mixtures of Fe2O3 and Fe 3 O 4 can be distinguished for temperatures up to 600 °C using 532 nm; Copper oxides did not yield suitable signals at elevated temperatures; The custom NETL samples did not yield suitable signals at elevated temperatures. Raman spectroscopy would be a suitable approach for calcium sulfate as this material provides a very strong Raman signal at high temperatures. Oxygen carrier particles of higher interest such as metal oxides, however, do not yield a strong-enough signal at elevated temperatures. As such, Raman spectroscopy is not suitable to differentiate the oxidation state of these materials at temperatures above 600 °C.

01 COAL, LIGNITE, AND PEAT↗

Raman Spectroscopy for the On-Line Analysis of Oxidation States of Oxygen Carrier Particles

The need for cleaner energy systems, including CO 2 capture technologies, is driving the current development of chemical looping technologies such as chemical looping combustion (CLC) and chemical looping gasification (CLG). Specific processes that are under development for using solid fuels are in-situ Gasification Chemical-Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU). Chemical looping is based on using oxygen carriers (e.g., iron oxides, copper oxides, calcium sulfates, etc.) to provide the oxygen for the reaction with the fuel. In order to optimize the overall process performance, it is critical that the properties of the oxygen carriers are well-defined and maintained for their specific purpose during the different stages of the CLC process. One of the critical properties of the oxygen carrier is its oxidation state (e.g., content of Fe 2 O 3 vs. Fe 3 O 4 ) as it affects the fundamental operation of the CLC process. Unfortunately, the ability to make on-line measurements of the oxidation state of oxygen carriers is lacking and new sensors need to be developed. The goal of this project was to evaluate the potential of Raman spectroscopy as a sensor for the on-line analysis of the oxidation state of oxygen carrier particles. Oxygen carrier particles (OCPs) of interest include iron oxides, copper oxides, calcium sulfite, and calcium sulfate, with particle sizes typically less than 0.5 mm diameter. The expected operating conditions of the sensor include OCP temperatures in the range of 800 °C to 1000 °C, and pressures of about 10 atm. We evaluated continuous wave (cw), Quasi cw, pulsed, and time-gated Raman spectroscopy at multiple wavelengths (355 nm, 360 nm, 532 nm, 633 nm, 785 nm). Samples included iron oxides, copper oxides, calcium sulfate, and a custom sample provided by NETL for temperatures beyond 1000 °C. Our findings can be summarized as follows: Calcium sulfate can be detected via cw and pulsed 532 nm Raman spectroscopy at temperatures above 1100 °C. Hematite (Fe 2 O 3 ) Raman spectra can be detected at temperatures of 700 °C via cw 360 nm, 1089 °C with cw 532 nm, 400 °C with cw 633 and 600 °C with cw 785 nm lasers. Magnetite (Fe 3 O 4 ) can be detected via cw 532 nm Raman spectroscopy up to 600 °C. Mixtures of Fe 2 O 3 and Fe 3 O 4 can be distinguished for temperatures up to 600 °C using 532 nm. Copper oxides did not yield suitable signals at elevated temperatures. The custom NETL samples did not yield suitable signals at elevated temperatures. Raman spectroscopy would be a suitable approach for calcium sulfate as this material provides a very strong Raman signal at high temperatures. Oxygen carrier particles of higher interest such as metal oxides, however, do not yield a strong-enough signal at elevated temperatures. As such, Raman spectroscopy is not suitable to differentiate the oxidation state of these materials at temperatures above 600 °C.

01 COAL, LIGNITE, AND PEAT↗

In Situ Cs and H Exchange into Gaidonnayite and Proposed Mechanisms of Ion Diffusion

Here, the microporous mineral gaidonnayite Na 2 ZrSi 3 O 9 ·2H 2 O was studied to better understand its ion-exchange mechanisms, specifically for Cs + and H + ions. In situ Raman spectroscopy, in situ X-ray diffraction (XRD), simultaneous thermogravimetric analysis and differential scanning calorimetry (TGA/DSC), and in situ X-ray fluorescence were used to determine the exchange processes involved. The Raman spectra contain strong peaks that can be attributed to the vibrational modes for the 3MR symmetric stretch at 500 cm –1 , Si–O–Zr–O chain stretches at 938 cm –1 , and Si–O stretching in the 1000–1100 cm –1 range. The most prominent Raman shift during ion exchange is found near the 520 cm –1 peak, which corresponds to distortions of the 3MR substructure of gaidonnayite. In all instances of this study, the 3MR exhibited the highest amount of distortion during ion exchange, and the evolution of this distortion is compared to unit-cell changes as measured from XRD data and elemental changes via XRF. The correlations between the Raman, XRD, and XRF data show rapid deformation of the 3MR during the onset of H + ion exchange in the Na form of gaidonnayite. Even when unit-cell volume changes were small (<3 Å 3 ) as in the cases for Cs + into Na-gaidonnayite and Cs + into H-gaidonnayite, significant changes in the ≈520 cm –1 peak were measured. By comparing XRD data and Raman data, and verifying the cation uptake by XRF, we were able to identify and confirm conformational changes and distortions in the crystal structure before, during, and after Cs + and H + exchange. Finally, Cs exchange occurred the fastest and with the greatest capacity when starting in the H-form at room temperature, and at elevated temperatures when starting in the Na-form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect-Induced Photoluminescence Enhancement and Corresponding Transport Degradation in Individual Suspended Carbon Nanotubes

The utilization of defects in carbon nanotubes to improve their photoluminescence efficiency has become a widespread study towards the realization of efficient light emitting devices. Here, we report a detailed comparison of defects in nanotubes (quantified by Raman spectroscopy) and photoluminescence (PL) intensity of individual suspended carbon nanotubes (CNTs). We have also the evaluated the impact of these defects on the electron/hole transport in the nanotubes, which is crucial for the ultimate realization of optoelectronic devices. We find that brightly luminescent nanotubes exhibit a pronounced D-band in their Raman spectra, and vice versa, dimly luminescent nanotubes exhibit almost no D-band. Here, defects are advantageous for light emission by trapping excitons, which extends their lifetimes. We quantify this behavior by plotting the PL intensity as a function of the I D /I G band Raman intensity ratio, which exhibits a Lorentz distribution peaked at I D /I G =0.17. For CNTs with a I D /I G ratio >0.25, the PL intensity decreases, indicating that, above some critical density, non-radiative recombination at defect sites dominates over the advantages of exciton trapping. In an attempt to fabricate optoelectronic devices based on these brightly luminescent CNTs, we transferred these suspended CNTs to platinum electrodes and found that the brightly photoluminescent nanotubes exhibit nearly infinite resistance due to these defects while those without bright photoluminescence exhibit finite resistance. These findings indicate a potential limitation in the use of brightly luminescent CNTs for optoelectronic applications.

36 MATERIALS SCIENCE↗

Selective incorporation of antimony into gallium nitride

Dilute concentrations of antimony (Sb) incorporation into GaN induce strong bandgap bowing and tunable room-temperature photoluminescence from the UV to the green spectral regions. However, the atomistic details of the incorporation of Sb into the GaN host remain unclear. In this work, we use first-principles calculations to understand the thermodynamics of Sb substitution into GaN and its effect on the optical and Raman spectra. Although it is empirically considered that Sb is preferentially incorporated as an anion (Sb3−) into the N sublattice, we demonstrate that Sb can also be incorporated as a cation (Sb3+, Sb5+) into the metal sublattice. Our thermodynamic analysis demonstrates that SbN0, SbGa2+, and SbGa0 can co-exist under Ga-rich conditions in n-type samples. We further confirm the dual incorporation of Sb by calculating the vibrational frequencies of different anionic and cationic substitutions to explain the origins of experimentally observed additional Raman peaks of Sb-doped GaN. Moreover, the calculated band structures of different Sb substitutions into GaN explain the experimental photoluminescence and optical absorption spectra. Overall, our analysis suggests that the coexistence of Sb3−, Sb3+, and Sb5+ substitutions into GaN explains the totality of experimental measurements. Our results demonstrate that the selective incorporation of Sb into GaN (and potentially other group-V elements such as As, P, or Bi) by tuning the growth conditions can drastically modify the electronic properties, for applications in visible light emitters and photocatalysis.

Physics↗

Resonance raman spectroscopic study of alumina-supported vanadium oxide catalysts with 220 and 287 nm excitation.

We present detailed resonance Raman spectroscopic results excited at 220 and 287 nm for alumina-supported VO{sub x} catalysts. The anharmonic constant, harmonic wavenumber, anharmonic force constant, bond dissociation energy, and bond length change in the excited state for double bonded V{double_bond}O and single bonded V-O were obtained from fundamental and overtone frequencies. Totally symmetric and nontotally symmetric modes could be discerned and assigned on the basis of the overtone and combination progressions found in the resonance Raman spectra. Selective resonance enhancement of two different vibrational modes with two different excitation wavelengths was observed. This allowed us to establish a linear relationship between charge transfer energy and VO bond length and, consequently, to assign the higher-energy charge transfer band centered around 210?250 nm in the UV?vis spectra to the V{double_bond}O transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Alpenglow Instruments All Phase Water Probe: SBIR Phase I Final Report

Current approaches for measuring water vapor, ice water content, and liquid water content in the atmosphere have a variety of limitations. This is particularly true for ice water content measurements, which are needed in a variety of contexts including understanding the impact of clouds on global climate. The Alpenglow All-Phase Water Probe, which was motivated by limitations of current approaches to measuring water vapor, liquid water, and ice water content in the atmosphere, uses Raman scattering to derive these quantities. The use of Raman scattering signals for retrieval of water vapor mixing ratio, liquid and ice water content has been used in remote sensing applications. This project explored the use of the same approach in an in situ probe to measure all three phases of water in the atmosphere. The prototype device developed in this Phase 1 DOE SBIR proposal was used to demonstrate proof of concept for using Raman scattering to detect signals from water vapor, liquid water, and ice water. The prototype instrument consisted of the transmitting laser (355 nm, 7ns pulse), collector optics and receiver body, and data system. The receiver section body split the return signal into four channels, one for nitrogen plus channels dominated by water vapor, liquid water, and ice. Tests were conducted over a range of conditions ranging from ambient conditions in the lab (low water vapor mixing ratio, no liquid or ice water content), through a cool but saturated plume produced by an off-the-shelf humidifier (moderate water vapor mixing ratio plus some liquid water content), and hot, saturated stream containing extremely high water vapor mixing ratios with liquid water. Data from these tests, which was recorded using a Licel photon-counting data system, demonstrated the sensitivity of the system to varying water vapor mixing ratios ranging from ~5 g m -3 to > 20 g m -3 . Signals in the water vapor and ice channels were observed during the humidifier and hot vapor tests, as expected given the overlap between the ice and water vapor Raman spectra, with the relative contributions to each channel varying as expected with temperature.

58 GEOSCIENCES↗

A Raman cell based on hollow core photonic crystal fiber for human breath analysis

Purpose: Breath analysis has a potential prospect to benefit the medical field based on its perceived advantages to become a point-of-care, easy to use, and cost-effective technology. Early studies done by mass spectrometry show that volatile organic compounds from human breath can represent certain disease states of our bodies, such as lung cancer, and revealed the potential of breath analysis. But mass spectrometry is costly and has slow-turnaround time. The authors’ goal is to develop a more portable and cost effective device based on Raman spectroscopy and hollow core-photonic crystal fiber (HC-PCF) for breath analysis. Methods: Raman scattering is a photon-molecular interaction based on the kinetic modes of an analyte which offers unique fingerprint type signals that allow molecular identification. HC-PCF is a novel light guide which allows light to be confined in a hollow core and it can be filled with a gaseous sample. Raman signals generated by the gaseous sample (i.e., human breath) can be guided and collected effectively for spectral analysis. Results: A Raman-cell based on HC-PCF in the near infrared wavelength range was developed and tested in a single pass forward-scattering mode for different gaseous samples. Raman spectra were obtained successfully from reference gases (hydrogen, oxygen, carbon dioxide gases), ambient air, and a human breath sample. The calculated minimum detectable concentration of this system was ∼15 parts per million by volume, determined by measuring the carbon dioxide concentration in ambient air via the characteristic Raman peaks at 1286 and 1388 cm{sup −1}. Conclusions: The results of this study were compared to a previous study using HC-PCF to trap industrial gases and backward-scatter 514.5 nm light from them. The authors found that the method presented in this paper has an advantage to enhance the signal-to-noise ratio (SNR). This SNR advantage, coupled with the better transmission of HC-PCF in the near-IR than in the visible wavelengths led to an estimated seven times improvement in the detection sensitivity. The authors’ prototype device also demonstrated a 100-fold improvement over a recently reported detection limit of a reflective capillary fiber-based Raman cell for breath analysis. Continued development is underway to increase the detection sensitivity further to reach practical clinical applications.

60 APPLIED LIFE SCIENCES↗

Order-disorder phase transformations in quaternary pyrochlore oxide system: Investigated by X-ray diffraction, transmission electron microscopy and Raman spectroscopic techniques

Order-disorder transformations in a quaternary pyrochlore oxide system, Ca-Y-Zr-Ta-O, were studied by powder X-ray diffraction (XRD) method, transmission electron microscope (TEM) and FT-NIR Raman spectroscopic techniques. The solid solutions in different ratios, 4:1, 2:1, 1:1, 1:2, 1:4, 1:6, of CaTaO{sub 3.5} and YZrO{sub 3.5} were prepared by the conventional high temperature ceramic route. The XRD results and Rietveld analysis revealed that the crystal structure changed from an ordered pyrochlore structure to a disordered defect fluorite structure as the ratios of the solid solutions of CaTaO{sub 3.5} and YZrO{sub 3.5} were changed from 4:1 to 1:4. This structural transformation in the present system is attributed to the lowering of the average cation radius ratio, r{sub A}/r{sub B} as a result of progressive and simultaneous substitution of larger cation Ca{sup 2+} for Y{sup 3+} at A sites and smaller cation Ta{sup 5+} for Zr{sup 4+} at B sites. Raman spectroscopy and TEM analysis corroborated the XRD results. - Graphical abstract: Selected area electron diffraction (SAED) patterns showed highly ordered diffraction maxima with characteristic superlattice weak diffraction spots of the pyrochlore structure for (a) Ca{sub 0.6}7Y{sub 1.33}Zr{sub 1.33}Ta{sub 0.33}O{sub 7} (C2YZT2) and bright diffraction maxima arranged in a ring pattern of the fluorite structure for (b) Ca{sub 0.29}7Y{sub 1.71}Zr{sub 1.71}Ta{sub 0.29}O{sub 7} (CY6Z6T).

36 MATERIALS SCIENCE↗

Raman Spectroscopy Characterization of Se- Doped Bi{sub 12}SiO{sub 20} Crystals

Crystals of BSO doped with Se are successfully grown by the Czochralski method. The measured concentration of Se is 1.75x10{sup 18} cm{sup -3} and of Fe is 6.4x10{sup 18} cm{sup -3}, i.e. the concentration of Fe is significantly increased. It is assumed that the doping takes place through the replacement 3Si{sup 4+}->(Se{sup 6+}+2Fe{sup 3+}). The doping-induced shift of the Raman-active A, E and F-modes is not significant and it is concluded that the lattice distortions caused by doping are very small in BSO crystals doped with Se at low concentrations. The doping with Se at high concentration leads to occasional second phase inclusions. It is observed that all A, E and F- modes in the Raman spectrum are downshifted with 2-5 cm{sup -1}. It is concluded that the doping with Se at high concentrations follows the same mechanism as those with low concentrations but the introduced lattice distortions are more significant.

36 MATERIALS SCIENCE↗

Raman spectroscopy of uranium nitride kernels

Uranium nitride is an advanced fuel candidate for a wide variety of advanced nuclear reactors. This work summarizes the first characterization of UN kernels by Raman spectroscopy. First-principles density functional theory calculations were performed to predict the Raman spectra of uranium sesquinitride (U 2 N 3 ), uranium dinitride (UN 2 ), uranium mononitride (UN), uranium monocarbide (UC), as well as U-N-C (UN 1-x C x ) and a U-N-C-O mixture. Further, a core–shell structure was identified by scanning electron microscopy and Raman spectroscopy imaging. A signal at ~500 cm -1 was identified on the periphery of the core-shell structure, possibly corresponding to U 2 N 3 and/or UN 2 . This signal broadens and shifts to 470 cm -1 because of the formation of UNC, UNCO or U 2 N 3+x structures. The culmination of this work demonstrates the feasibility of using Raman spectroscopy to identify variations in composition and phases in UN kernels.

36 MATERIALS SCIENCE↗

Spin–phonon couplings in transition metal complexes with slow magnetic relaxation

Spin–phonon coupling plays an important role in single-molecule magnets and molecular qubits. However, there have been few detailed studies of its nature. Here in this paper, we show for the first time distinct couplings of g phonons of Co II (acac) 2 (H 2 O) 2 (acac = acetylacetonate) and its deuterated analogs with zero-field-split, excited magnetic/spin levels (Kramers doublet (KD)) of the S = 3/2 electronic ground state. The couplings are observed as avoided crossings in magnetic-field-dependent Raman spectra with coupling constants of 1–2 cm -1 . Far-IR spectra reveal the magnetic-dipole-allowed, inter-KD transition, shifting to higher energy with increasing field. Density functional theory calculations are used to rationalize energies and symmetries of the phonons. A vibronic coupling model, supported by electronic structure calculations, is proposed to rationalize the behavior of the coupled Raman peaks. In conclusion, this work spectroscopically reveals and quantitates the spin–phonon couplings in typical transition metal complexes and sheds light on the origin of the spin–phonon entanglement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic evidence for the Fe3+ spin transition in iron-bearing δ-AlOOH at high pressure

δ-AlOOH has emerged as a promising candidate for water storage in the lower mantle and could have delivered water into the bottom of the mantle. To date, it still remains unclear how the presence of iron affects its elastic, rheological, vibrational, and transport properties, especially across the spin crossover. In this study, we conducted high-pressure X-ray emission spectroscopy experiments on a δ-(Al 0.85 Fe 0.15 ) OOH sample up to 53 GPa using silicone oil as the pressure transmitting medium in a diamond-anvil cell. We also carried out laser Raman measurements on δ-(Al 0.85 Fe 0.15 )OOH and δ-(Al 0.52 Fe 0.48 )OOH up to 57 and 62 GPa, respectively, using neon as the pressure-transmitting medium. Evolution of Raman spectra of δ-(Al 0.85 Fe 0.15 )OOH with pressure shows two new bands at 226 and 632 cm –1 at 6.0 GPa, in agreement with the transition from an ordered ( P 2 1 nm ) to a disordered hydrogen bonding structure ( Pnnm ) for δ-AlOOH. Similarly, the two new Raman bands at 155 and 539 cm –1 appear in δ-(Al 0.52 Fe 0.48 )OOH between 8.5 and 15.8 GPa, indicating that the incorporation of 48 mol% FeOOH could postpone the order-disorder transition upon compression. On the other hand, the satellite peak ( K β') intensity of δ-(Al 0.85 Fe 0.15 )OOH starts to decrease at ~30 GPa and it disappears completely at 42 GPa. That is, δ-(Al 0.85 Fe 0.15 )OOH undergoes a gradual electronic spin-pairing transition at 30–42 GPa. Furthermore, the pressure dependence of Raman shifts of δ-(Al 0.85 Fe 0.15 )OOH discontinuously decreases at 32–37 GPa, suggesting that the improved hydrostaticity by the use of neon pressure medium could lead to a relatively narrow spin crossover. Notably, the pressure dependence of Raman shifts and optical color of δ-(Al 0.52 Fe 0.48 )OOH dramatically change at 41–45 GPa, suggesting that it probably undergoes a relatively sharp spin transition in the neon pressure medium. Together with literature data on the solid solutions between δ-AlOOH and ε-FeOOH, we found that the onset pressure of the spin transition in δ-(Al,Fe)OOH increases with increasing FeOOH content. These results shed new insights into the effects of iron on the structural evolution and vibrational properties of δ-AlOOH. The presence of FeOOH in δ-AlOOH can substantially influence its high-pressure behavior and stability at the deep mantle conditions and play an important role in the deep-water cycle

58 GEOSCIENCES↗

Effect of nitrogen on the growth of boron doped single crystal diamond

Boron-doped single crystal diamond films were grown homoepitaxially on synthetic (100) Type Ib diamond substrates using microwave plasma assisted chemical vapor deposition. A modification in surface morphology of the film with increasing boron concentration in the plasma has been observed using atomic force microscopy. Use of nitrogen during boron doping has been found to improve the surface morphology and the growth rate of films but it lowers the electrical conductivity of the film. The Raman spectra indicated a zone center optical phonon mode along with a few additional bands at the lower wavenumber regions. The change in the peak profile of the zone center optical phonon mode and its downshift were observed with the increasing boron content in the film. Furthermore, sharpening and upshift of Raman line was observed in the film that was grown in presence of nitrogen along with diborane in process gas.

36 MATERIALS SCIENCE↗

High pressure raman spectroscopy and X-ray diffraction of K2Ca(CO3)2 bütschliite: multiple pressure-induced phase transitions in a double carbonate

Abstract The crystal structure and bonding environment of K 2 Ca(CO 3 ) 2 bütschliite were probed under isothermal compression via Raman spectroscopy to 95 GPa and single crystal and powder X-ray diffraction to 12 and 68 GPa, respectively. A second order Birch-Murnaghan equation of state fit to the X-ray data yields a bulk modulus, $${K}_{0}=46.9$$ K 0 = 46.9 GPa with an imposed value of $${K}_{0}^{\prime}= 4$$ K 0 ′ = 4 for the ambient pressure phase. Compression of bütschliite is highly anisotropic, with contraction along the c -axis accounting for most of the volume change. Bütschliite undergoes a phase transition to a monoclinic C 2/ m structure at around 6 GPa, mirroring polymorphism within isostructural borates. A fit to the compression data of the monoclinic phase yields $${V}_{0}=322.2$$ V 0 = 322.2 Å 3 $$,$$ , $${K}_{0}=24.8$$ K 0 = 24.8 GPa and $${K}_{0}^{\prime}=4.0$$ K 0 ′ = 4.0 using a third order fit; the ability to access different compression mechanisms gives rise to a more compressible material than the low-pressure phase. In particular, compression of the C 2/ m phase involves interlayer displacement and twisting of the [CO 3 ] units, and an increase in coordination number of the K + ion. Three more phase transitions, at ~ 28, 34, and 37 GPa occur based on the Raman spectra and powder diffraction data: these give rise to new [CO 3 ] bonding environments within the structure.

36 MATERIALS SCIENCE↗

A microfluidic platform for pharmaceutical salt screening

We describe a microfluidic platform comprised of 48 wells to screen for pharmaceutical salts. Solutions of pharmaceutical parent compounds (PCs) and salt formers (SFs) are mixed on-chip in a combinatorial fashion in arrays of 87.5-nanolitre wells, which constitutes a drastic reduction of the volume of PC solution needed per condition screened compared to typical high throughput pharmaceutical screening approaches. Nucleation and growth of salt crystals is induced by diffusive and/or convective mixing of solutions containing, respectively, PCs and SFs in a variety of solvents. Here, to enable long term experiments, solvent loss was minimized by reducing the thickness of the absorptive polymeric material, polydimethylsiloxane (PDMS), and by using solvent impermeable top and bottom layers. Additionally, well isolation was enhanced via the incorporation of pneumatic valves that are closed at rest. Brightfield and polarized light microscopy and Raman spectroscopy were used for on-chip analysis and crystal identification. Using a gold-coated glass substrate and minimizing the thickness of the PDMS control layer drastically improved the signal-to-noise ratio for Raman spectra. Two drugs, naproxen (acid) and ephedrine (base), were used for validation of the platform's ability to screen for salts. Each PC was mixed combinatorially with potential SFs in a variety of solvents. Crystals were visualized using brightfield polarized light microscopy. Subsequent on-chip analyses of the crystals with Raman spectroscopy identified four different naproxen salts and five different ephedrine salts.

47 OTHER INSTRUMENTATION↗

Syntheses, Raman spectroscopy and crystal structures of alkali hexafluoridorhenates(IV) revisited

The A 2 [ReF 6 ] (A = K, Rb and Cs) salts are isotypic and crystallize in the trigonal space group type P$\bar{3}$m1, adopting the K 2 [GeF 6 ] structure type. Common to all A 2 [ReF 6 ] structures are slightly distorted octa­hedral [ReF 6 ] 2- anions with an average Re—F bond length of 1.951 (8) Å. In these salts, symmetry lowering on the local [ReF 6 ] 2- anions from O h (free anion) to D 3d (solid-state structure) occur. The distortions of the [ReF 6 ] 2- anions, as observed in their Raman spectra, are correlated to the size of the counter-cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous vibrational modes in few layer WTe 2 revealed by polarized Raman scattering and first-principles calculations

When layered transition-metal dichalcogenides (TMDs) are scaled down from a three- to a two-dimensional geometry, electronic and structural transitions occur, leading to the emergence of properties not usually found in the bulk. Here, we report a systematic Raman study of exfoliated semi-metallic WTe 2 flakes with thickness ranging from few layers down to a single layer. A dramatic change in the Raman spectra occurs between the monolayer and few-layer WTe 2 as a vibrational mode centered at ~86.9 cm -1 in the monolayer splits into two active modes at 82.9 and 89.6 cm -1 in the bilayer. Davydov splitting of these two modes is found in the bilayer, as further evidenced by polarized Raman measurements. Strong angular dependence of Raman modes on the WTe 2 film thickness reflects that the existence of directional interlayer interaction, rather than isotropic van der Waals (vdw) coupling, is playing an essential role affecting the phonon modes, especially in anisotropic 2D WTe 2 material. Therefore, the strong evolution of Raman modes with thickness and polarization direction, can not only be a reliable fingerprint for the determination of the thickness and the crystallographic orientation, but can also be an ideal probe for such strong and directional interlayer interaction.

36 MATERIALS SCIENCE↗