Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Collisional narrowing effects in the Raman Q-branch spectral profiles of N2, CO, and NO

A description is presented of coherent Raman spectroscopic studies of N2, CO, and NO molecules. It is pointed out that the Q-branch Raman spectra of these simple diatomics are characterized by lines which overlap with increasing pressure as a result of collisional line broadening. Attention is given to Q-branch vibrational spectra and their determination, the spectral line shape of isolated lines, the line overlap regime, fitting laws, and the isotropic Raman spectrum of NO. It is found that the room temperature spectra of the considered molecules at low pressure (approximately 0.2 atm) may be treated as a sum of isolated lines. It is possible to extract J-dependent pressure-broadening coefficients. With increasing pressure, collisional narrowing occurs and the description of the spectrum must include the effects of interference among neighboring lines.

Hurst, W. S.↗

Anisotropic Raman Scattering and Lattice Orientation Identification of 2M-WS 2

Anisotropic materials with low symmetries hold significant promise for next-generation electronic and quantum devices. 2M-WS 2 , which is a candidate for topological superconductivity, has garnered considerable interest. However, a comprehensive understanding of how its anisotropic features contribute to unconventional superconductivity, along with a simple, reliable method to identify its crystal orientation, remains elusive. Here, we combine theoretical and experimental approaches to investigate angle- and polarization-dependent anisotropic Raman modes of 2M-WS 2 . Through first-principles calculations, we predict and analyze the phonon dispersion and lattice vibrations of all Raman modes in 2M-WS 2 . We establish a direct correlation between their anisotropic Raman spectra and high-resolution transmission electron microscopy images. Finally, we demonstrate that anisotropic Raman spectroscopy can accurately determine the crystal orientation and twist angle between two stacked 2M-WS 2 layers. Furthermore, our findings provide insights into the electron–phonon coupling and anisotropic properties of 2M-WS 2 , paving the way for the use of anisotropic materials in advanced electronic and quantum devices.

2M-WS2↗

Radiation-induced alteration of apatite on the surface of Mars: first in situ observations with SuperCam Raman onboard Perseverance

Abstract Planetary exploration relies considerably on mineral characterization to advance our understanding of the solar system, the planets and their evolution. Thus, we must understand past and present processes that can alter materials exposed on the surface, affecting space mission data. Here, we analyze the first dataset monitoring the evolution of a known mineral target in situ on the Martian surface, brought there as a SuperCam calibration target onboard the Perseverance rover. We used Raman spectroscopy to monitor the crystalline state of a synthetic apatite sample over the first 950 Martian days (sols) of the Mars2020 mission. We note significant variations in the Raman spectra acquired on this target, specifically a decrease in the relative contribution of the Raman signal to the total signal. These observations are consistent with the results of a UV-irradiation test performed in the laboratory under conditions mimicking ambient Martian conditions. We conclude that the observed evolution reflects an alteration of the material, specifically the creation of electronic defects, due to its exposure to the Martian environment and, in particular, UV irradiation. This ongoing process of alteration of the Martian surface needs to be taken into account for mineralogical space mission data analysis.

Science & Technology - Other Topics↗

Thermal decomposition of neptunyl ammonium nitrate: mechanistic insights and structural characterization of the Np 2 O 5 intermediate phase

Neptunium (Np) possesses a rich and unique chemistry that often diverges from other actinide elements yet remains relatively underexplored compared with the other light actinides. A resurgence of interest in Np has been spurred by the application of 237 Np for plutonium-238 ( 238 Pu) production for use in radioisotope thermoelectric generators (RTGs), necessitating evaluation of Np chemical reactions and materials. The work presented here studied the thermal decomposition of neptunyl ammonium nitrate (NH 4 Np VI O 2 (NO 3 ) 3 ) for synthesis of neptunium dioxide (NpO 2 ), which is the target material used for production of 238 Pu. Additionally, structural characterization of the intermediate solid Np pentoxide (Np 2 O 5 ) was performed. Advanced solid-state characterization techniques, including simultaneous thermal analysis (STA), powder X-ray diffraction (pXRD), Raman spectroscopy, and density functional theory (DFT) modeling have been combined to study the reaction pathways. Analysis revealed that NH 4 Np VI O 2 (NO 3 ) 3 thermally decomposes to a proposed neptunyl nitrate intermediate, followed by Np 2 O 5 and finally NpO 2 , all within the temperature range of 150 °C–600 °C. Further characterization of the pentoxide intermediate provided the first Raman spectra of pure-phase Np 2 O 5 and associated DFT modeling confirmed Raman peak assignments for this phase. These findings provide mechanistic information to advance production of the critical radioisotope 238 Pu and advance the state of knowledge on Np materials chemistry using modern characterization techniques.

Lawson, Kathryn M. [Oak Ridge National Laboratory ↗

Analysis of torsional spectra of molecules with two C3v internal rotors. IV - The torsional potential function for propane-d0 and -d3

The Raman spectra of gaseous propane-d0 and -d3 have been recorded between 50 and 3500 cm. Considerable torsional data are reported and used to characterize the torsional potential function based on a semirigid model. The average 'effective' V3 for the propanes is found to be 1139 plus or minus 10/cm. The sine-sine coupling term is similar in magnitude but opposite in sign to the cosine-cosine coupling term in propane-d0.

Durig, J. R.↗

Zone-center phonons in yellow phase CsSnI 3

Here, the zone-center phonons are calculated for yellow phase CsSnI 3 using density functional perturbation theory in a plane-wave pseudopotential method. The infrared absorption and reflection spectra are simulated and show that the absorption has a strong contribution from the LO as well as TO modes. The polarization-dependent Raman spectra for various configurations are simulated. The results for the Raman and the infrared reflectionspectra are found to be in good agreement with the available experimental data when averaging over directions.The Born effective charges and high- and low-frequency dielectric tensors are calculated. The ratio of the static to the high-frequency dielectric constants is high in the y direction.

36 MATERIALS SCIENCE↗

Junction Plasmon-Induced Molecular Reorientation

Time and frequency dependent intensity variations in sequences of Raman spectra recorded at plasmonic junctions can be assigned to molecular reorientation. This is revealed through Raman trajectories recorded at a nanojunction formed between a silver AFM tip and a corrugated silver surface coated with biphenyl-4,4’-dithiol. Molecular motion is not observed when the tip is retracted and only surface enhancement is operative. In effect, junction plasmon induced molecular reorientation is tracked.

Environmental Molecular Sciences Laboratory↗

Vibrational spectroscopy of shock compressed condensed phase nitrous oxide: Frequency shifts in the ν 1 mode

Over many years, we have published vibrational spectra of molecular materials at extreme pressure and temperature obtained using shock compression and coherent Raman spectroscopy methods. For diatomic molecules, we were able to extract vibrational temperatures from the intensities of spectrally resolved vibrational hot bands. Larger molecules in the condensed phase suffer band broadening effects that obscure the vibrational hot bands as the anharmonicities are typically smaller than the widths of the bands. This inability to resolve the hot bands inhibits the extraction of vibrational temperature and the measurement of the vibrational frequency of the fundamental. Here, we use a hot band model based on gas-phase anharmonic coupling coefficients to fit coherent anti-Stokes Raman spectra of the ν 1 vibrational mode of shock compressed condensed phase N 2 O with shock pressures and temperatures estimated from literature equations of state and compare to fits from a model using a single Gaussian peak. We report the resulting vibrational frequency shifts with shock pressure.

36 MATERIALS SCIENCE↗

Remote measurement of ocean temperature from depolarization in Raman scattering

Ocean temperatures may be mapped in three dimensions from an aircraft down to depths of 2 to 4 attenuation lengths by monitoring Raman radiation backscattered from a laser beam. This paper describes laboratory experiments on the temperature dependence of Raman spectra of saline solutions and calculations of the expected performance of a field system. The Raman technique is of greatest potential utility in coastal and estuarine waters where gradients are relatively high. It is estimated that seawater temperature may be measured to a statistical precision of 0.5 C at depths to four attenuation lengths in two meter water, using one Joule of transmitted laser energy.

Chang, C. H.↗

Thermal processing of omicron-terphenyl - A Raman study

Raman spectra from omicron-terphenyl sealed in glass capillary tubes were acquired over temperatures ranging from 233 to 343 K. Over this temperature range, omicron-terphenyl can exist in the solid-crystalline, molten, supercooled-liquid, and amorphous-glassy states. Representative structure-sensitive spectra are presented along with a qualitative description. The lattice spectral feature occurring at a Raman shift of 123/cm displays abrupt changes in profile and intensity as melting and glass transition occur. The intensity ratio of the C-C stretching 996/cm line and C-H stretching line at 1008/cm displays a change related to the transformation of the ordered-crystalline phase to the disordered-liquid or glassy state. At a Raman shift of 1162/cm the solid-crystalline state shows a splitting due to the effect of the crystal field. The possibility of using these structure-sensitive Raman characteristics for in situ diagnostics during materials processing is discussed.

Biswas, A.↗

Remote Pulsed-Laser Raman Spectroscopy System for Mineral Analysis

We have measured Raman spectra of carbonate, silicate, and hydrous silicate and sulfate minerals, our new remote-pulsed Raman system, indicating that it can be used to analyze the minerals on planetary surfaces to a distance of 10 to 66 meters. Additional information is contained in the original extended abstract.

Sharma, S. K.↗

High-Pressure Gaseous Burner (HPGB) Facility Completed for Quantitative Laser Diagnostics Calibration

A gas-fueled high-pressure combustion facility with optical access, which was developed over the last 2 years, has just been completed. The High Pressure Gaseous Burner (HPGB) rig at the NASA Glenn Research Center can operate at sustained pressures up to 60 atm with a variety of gaseous fuels and liquid jet fuel. The facility is unique as it is the only continuous-flow, hydrogen-capable, 60-atm rig in the world with optical access. It will provide researchers with new insights into flame conditions that simulate the environment inside the ultra-high-pressure-ratio combustion chambers of tomorrow's advanced aircraft engines. The facility provides optical access to the flame zone, enabling the calibration of nonintrusive optical diagnostics to measure chemical species and temperature. The data from the HPGB rig enables the validation of numerical codes that simulate gas turbine combustors, such as the National Combustor Code (NCC). The validation of such numerical codes is often best achieved with nonintrusive optical diagnostic techniques that meet these goals: information-rich (multispecies) and quantitative while providing good spatial and time resolution. Achieving these goals is a challenge for most nonintrusive optical diagnostic techniques. Raman scattering is a technique that meets these challenges. Raman scattering occurs when intense laser light interacts with molecules to radiate light at a shifted wavelength (known as the Raman shift). This shift in wavelength is unique to each chemical species and provides a "fingerprint" of the different species present. The facility will first be used to gather a comprehensive data base of laser Raman spectra at high pressures. These calibration data will then be used to quantify future laser Raman measurements of chemical species concentration and temperature in this facility and other facilities that use Raman scattering.

Nguyen, Quang-Viet↗

Low-Resolution Raman-Spectroscopy Combustion Thermometry

A method of optical thermometry, now undergoing development, involves low-resolution measurement of the spectrum of spontaneous Raman scattering (SRS) from N2 and O2 molecules. The method is especially suitable for measuring temperatures in high pressure combustion environments that contain N2, O2, or N2/O2 mixtures (including air). Methods based on SRS (in which scattered light is shifted in wavelength by amounts that depend on vibrational and rotational energy levels of laser-illuminated molecules) have been popular means of probing flames because they are almost the only methods that provide spatially and temporally resolved concentrations and temperatures of multiple molecular species in turbulent combustion. The present SRS-based method differs from prior SRS-based methods that have various drawbacks, a description of which would exceed the scope of this article. Two main differences between this and prior SRS-based methods are that it involves analysis in the frequency (equivalently, wavelength) domain, in contradistinction to analysis in the intensity domain in prior methods; and it involves low-resolution measurement of what amounts to predominantly the rotational Raman spectra of N2 and O2, in contradistinction to higher-resolution measurement of the vibrational Raman spectrum of N2 only in prior methods.

Nguyen, Quang-Viet↗

Damaged carbon nanotubes get healed by ion irradiation

Carbon nanotubes (CNTs) are being used for varied applications. It is therefore important to study their stability under extreme conditions of temperature and irradiation. In this work, we report the stability of CNTs [both single-wall CNTs (SWCNTs) and multiwalled CNTs (MWCNTs)] under irradiation of a carbon ion beam of energy 55 MeV. The irradiated samples were analyzed using Raman spectroscopy. The Raman results indicate the interesting phenomenon of healing or annealing of CNTs under ion beam irradiation. The annealing process appears to begin at the lowest value of fluences and persists for quite a good range of fluence values. As the irradiation dose increases ({approx_equal}1x10{sup 14} ions/cm{sup 2}) the MWCNTs begin to amorphize whereas the SWCNTs system continues to heal.

36 MATERIALS SCIENCE↗

Are Al{sub 2}O{sub 3} and MgO tunnel barriers suitable for spin injection in graphene?

We report on the structural impact on graphene and multi-layers graphene of the growth by sputtering of tunnel barriers. Sputtered Al{sub 2}O{sub 3} and MgO barriers were chosen for their well-known efficiency as spin injectors in spintronics devices. The impact of the growth on the structure of graphene and up to 4-layer flakes was analyzed by Raman spectroscopy. This study reveals that for Al{sub 2}O{sub 3} growth, the impact is moderate for a monolayer and decreases sharply for bilayers and above. In the case of MgO all the flakes underwent a strong amorphization. Moreover, this reveals that while single layer graphene is believed to offer the best spin transport properties, the better robustness of multilayer graphene may ultimately make it a better choice for spintronics devices.

36 MATERIALS SCIENCE↗