Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Defect-induced phonon-resonant scattering and its influence on thermal transport of irradiated thorium-dioxide

Thermal transport in proton irradiated thorium-dioxide (ThO 2 ) is investigated. Using a combination of experiments and first-principles computational framework, the role of lattice defects on thermal conductivity is analyzed. A resonant-phonon scattering mechanism beyond the traditionally considered Rayleigh scattering is found to significantly influence low-temperature thermal transport in the presence of irradiation-induced point defects. The existence of localized phonon modes associated with irradiation-induced defects is suggested by the inability of the first-principles based thermal conductivity model—which considers only three-phonon interactions and phonon-defects scattering using the Tamura formalism—to predict the experimental results, unless a resonant scattering mechanism is included. The emergence of additional peaks in the Raman spectra in the proximity of phonon-resonant frequency provides further evidence for the existence of localized modes. Coupled with a microstructure evolution model, this analysis enables more accurate analysis for contrasting the contributions of different phonon scattering mechanisms across all irradiation doses and temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Closed Loop Testing of Microphonics Algorithms Using a Cavity Emulator

An analog crystal filter based cavity emulator is modified with reverse biased varactor diodes to provide a tuning range of around 160 Hz. The piezo drive voltage of the resonance controller is used to detune the cavity through the bias voltage. A signal conditioning and summing circuit allows the introduction of microphonics disturbance from a signal source or using real microphonics data from cavity testing. This setup is used in closed loop with a cavity controller and resonance controller to study the effectiveness of resonance control algorithms suitable for superconducting cavities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Thermal annealing of natural, radiation-damaged pyrochlore

Abstract Radiation damage in minerals is caused by the α-decay of incorporated radionuclides, such as U and Th and their decay products. The effect of thermal annealing (400–1000 K) on radiation-damaged pyrochlores has been investigated by Raman scattering, X-ray powder diffraction (XRD), and combined differential scanning calorimetry/thermogravimetry (DSC/TG). The analysis of three natural radiation-damaged pyrochlore samples from Miass/Russia [6.4 wt% Th, 23.1·10

nuclear (including radiation effects), materials a↗
DOE OSTI2015

Study of the processes of degradation of the optical properties of mesoporous and macroporous silicon upon exposure to simulated solar radiation

The effect of solar radiation on the surface composition of mesoporous and macroporous silicon is studied by infrared spectroscopy, Raman spectroscopy, and photoluminescence measurements in order to analyze the possibility of using these materials as a material for solar-power engineering. The studies are conducted in the laboratory environment, with the use of a solar-radiation simulator operating under conditions close to the working conditions of standard silicon solar cells. The studies show that, in general, the materials meet the requirements of solar-power engineering, if it is possible to preclude harmful effects associated with the presence of heat-sensitive and photosensitive bonds at the nanomaterial surface by standard processing methods.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Partial Least Squares, Experimental Design, and Near-Infrared Spectrophotometry for the Remote Quantification of Nitric Acid Concentration and Temperature

Near-infrared spectrophotometry and partial least squares regression (PLSR) were evaluated to create a pleasantly simple yet effective approach for measuring HNO3 concentration with varying temperature levels. A training set, which covered HNO3 concentrations (0.1–8 M) and temperature (10–40 °C), was selected using a D-optimal design to minimize the number of samples required in the calibration set for PLSR analysis. The top D-optimal-selected PLSR models had root mean squared error of prediction values of 1.4% for HNO 3 and 4.0% for temperature. The PLSR models built from spectra collected on static samples were validated against flow tests including HNO 3 concentration and temperature gradients to test abnormal conditions (e.g., bubbles) and the model performance between sample points in the factor space. Based on cross-validation and prediction modeling statistics, the designed near-infrared absorption approach can provide remote, quantitative analysis of HNO 3 concentration and temperature for production-oriented applications in facilities where laser safety challenges would inhibit the implementation of other optical techniques (e.g., Raman spectroscopy) and in which space, time, and/or resources are constrained. The experimental design approach effectively minimized the number of samples in the training set and maintained or improved PLSR model performance, which makes the described chemometric approach more amenable to nuclear field applications.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2018

3D Plasmon Coupling Assisted Sers on Nanoparticle-Nanocup Array Hybrids

Unique colorimetric optical properties of nanomaterials can effectively influence the light absorption or emission of molecules. Here, we design plasmonic substrate for surface-enhanced Raman scattering (SERS) by inducing three-dimensional (3D) hot spots on the sensing surface. The 3D hot spots are formed by the self-assembly of plasmonic nanoparticles (NPs) on a 3D plasmonic nanocup array structure. This 3D hot spot formation on the periodic nanocup arrays achieves much higher SERS enhancement factor than the 2D NP arrays, which have been conventionally sought SERS substrates. We also utilize the colorimetric properties of the nanocup arrays for an additional degree of SERS enhancement. Colorimetry, achieved by tunable plasmon resonance wavelength by controlling dielectric property on the nanocup array surface, eases the modulation of the plasmonic resonance condition without modifying the nanostructure design. By continuously monitoring the shifts of the plasmon resonance condition and its effect on the light absorption and emission of the nearby molecules, we verify that larger SERS enhancement is achieved when the plasmon resonance wavelength is matched with the Raman excitation wavelength. In conclusion, the ease of plasmon resonance tuning of this nanocup array-nanoparticle hybrid structure allows versatile SERS enhancement for a variety of different Raman measurement conditions.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Ocean Raman Scattering in Satellite Backscatter UV Measurements

Ocean Raman scattering significantly contributes to the filling-in of solar Fraunhofer lines measured by satellite backscatter ultraviolet (buy) instruments in the cloudless atmosphere over clear ocean waters. A model accounting for this effect in buy measurements is developed and compared with observations from the Global Ozone Monitoring Experiment (GONE). The model extends existing models for ocean Raman scattering to the UV spectral range. Ocean Raman scattering radiance is propagated through the atmosphere using a concept of the Lambert equivalent reflectively and an accurate radiative transfer model for Rayleigh scattering. The model and observations can be used to evaluate laboratory measurements of pure water absorption in the UV. The good agreement between model and observations suggests that buy instruments may be useful for estimating chlorophyll content.

Vasilkov, Alexander P.↗
DOE OSTI2016

Calcium carbonate formation on mica supported extracellular polymeric substance produced by Rhodococcus opacus

Extracellular polymeric substance (EPS) extracted from Rhodococcus opacus bacterial strain was used as a matrix for calcium carbonate precipitation using the vapour diffusion method. The total exopolymer and water-soluble exopolymer fraction of different concentrations were spread on the mica surface by the spin-coating method. The obtained layers were characterized using the atomic force microscopy measurement and XPS analysis. The effects of polymer concentration, initial pH of calcium chloride solution and precipitation time on the obtained crystals properties were investigated. Raman spectroscopy and scanning electron microscopy were used to characterize the precipitated minerals. It was found that the type of precipitated CaCO{sub 3} polymorph and the crystal size depend on the kind of EPS fraction. The obtained results indicates that the water soluble fraction favours vaterite dissolution and calcite growth, whereas the total EPS stabilizes vaterite and this effect is stronger at basic pH. It seems to be due to different contents of the functional group of EPS fractions. - Highlights: • CaCO{sub 3} crystal size and polymorph can be controlled by EPS substance obtained from R. opacus. • The water soluble fraction favours vaterite dissolution and calcite growth. • The total EPS stabilizes vaterite. • This effect is stronger at basic pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2009

Control of the Diameter and Chiral Angle Distributions during Production of Single-Wall Carbon Nanotubes

Many applications of single wall carbon nanotubes (SWCNT), especially in microelectronics, will benefit from use of certain (n,m) nanotube types (metallic, small gap semiconductor, etc.) Especially fascinating is the possibility of quantum conductors that require metallic armchair nanotubes. However, as produced SWCNT samples are polydisperse, with many (n,m) types present and typical approx.1:2 metal/semiconductor ratio. Nanotube nucleation models predict that armchair nuclei are energetically preferential due to formation of partial triple bonds along the armchair edge. However, nuclei can not reach any meaningful thermal equilibrium in a rapidly expanding and cooling plume of carbon clusters, leading to polydispersity. In the present work, SWCNTs were produced by a pulsed laser vaporization (PLV) technique. The carbon vapor plume cooling rate was either increased by change in the oven temperature (expansion into colder gas), or decreased via "warm-up" with a laser pulse at the moment of nucleation. The effect of oven temperature and "warm-up" on nanotube type population was studied via photoluminescence, UV-Vis-NIR absorption and Raman spectroscopy. It was found that reduced temperatures leads to smaller average diameters, progressively narrower diameter distributions, and some preference toward armchair structures. "Warm-up" shifts nanotube population towards arm-chair structures as well, but the effect is small. Possible improvement of the "warm-up" approach to produce armchair SWCNTs will be discussed. These results demonstrate that PLV production technique can provide at least partial control over the nanotube (n,m) population. In addition, these results have implications for the understanding the nanotube nucleation mechanism in the laser oven.

Nikolaev, Pavel↗
DOE OSTI2016

The experimental study of the effect of microwave on the physical properties of multi-walled carbon nanotubes

Highlights: • We study the microwave effect on the multi-walled carbon nanotubes (MWCNTs). • We examine the non uniform heating effect on the physical structure of MWCNTs. • We examine the purification of MWCNTs by microwave. • We analyze the thermal characteristics of microwave treated MWCNTs. - Abstract: This paper reports the effect of microwave on the physical properties of multi-walled carbon nanotubes (MWCNTs) where different power levels of microwave were applied on MWCNTs in order to apprehend the effect of microwave on MWCNTs distinctly. A low energy ball milling in aqueous circumstance was also applied on both MWCNTs and microwave treated MWCNTs. Temperature profile, morphological analysis by field emission scanning electron microscopy (FESEM), defect analysis by Raman spectroscopy, thermal conductivity, thermal diffusivity as well as heat transfer coefficient enhancement ratio were studied which expose some strong witnesses of the effect of microwave on the both purification and dispersion properties of MWCNTs in base fluid distilled water. The highest thermal conductivity enhancement (6.06% at 40 °C) of MWCNTs based nanofluid is achieved by five minutes microwave treatment as well as wet grinding at 500 rpm for two hours.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of Ion Irradiation on Amorphous and Crystalline Ge–Se and Their Application as Phase Change Temperature Sensor

Research on phase change materials is predominantly focused on their application as memory devices or for temperature control which requires low phase change temperature. The Ge–Se binary chalcogenide glass system with its wide glass-forming region is a potential candidate for high-temperature and high-radiation phase change applications. In this study, the concept of employing Ge x Se 100– x glasses to monitor high temperature (450–528 °C) using the phase change effect, is reported. Materials selection, device structure, and performance of prototype sensors are analyzed. In addition, the effect of heavy ion irradiation by Xe ions with energies of 200, 600, and 1000 keV (fluence ≈10 14 cm –2 ) on the Ge x Se 100– x ( x = 30, 33, 40) thin films and phase change devices is studied. The irradiation effect on the amorphous and crystalline structure of the thin films is evaluated by Raman spectroscopy and X-ray diffraction (XRD). Although the changes in the structural units of amorphous films are negligible, in crystalline films orthorhombic-GeSe 2 crystals are found to be most affected by irradiation and a new phase, orthorhombic GeSe is found in the thin films after irradiation. The performance of a sensor with an active film of Ge 40 Se 60 is also shown as an example.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Mechanisms and kinetics of citrate-promoted dissolution of a uranyl phosphate mineral

The formation of uranyl phosphate precipitates is a remediation strategy to limit the mobility of uranium in contaminated soils. However, exposure to organic ligands, like the plant exudate citrate, can remobilize the uranium. The purpose of this study is to provide a more thorough comprehension of citrate-promoted dissolution of a uranyl phosphate mineral, chernikovite [(H 3 O)(UO 2 )(PO 4 )·3H 2 O], by determining the extent of uranium release from chernikovite at a wide range of citrate concentrations. Here we have quantified the kinetics of dissolution and proposed potential mechanisms of chernikovite dissolution to gain a better understanding of the fate of uranyl phosphate precipitates in the environment. Batch dissolution and continuously stirred tank reactor (CSTR) experiments indicate that increasing citrate concentrations from 0.1 mM to 50 mM increases the concentration of dissolved uranium. However, at citrate concentrations of 10 mM and greater, the effectiveness of the ligand to enhance the dissolution decreases. Density functional theory modeling and Raman spectroscopy indicate a strong interaction between citrate and the uranyl ions at the surface of the uranyl phosphate. The interaction between citrate and uranyl suggests the formation of an alteration layer of uranyl-citrate surface complexes, which could impede uranium release at citrate concentrations of 10 mM or higher. Together, these results indicate that the citrate-promoted dissolution of chernikovite is a fast reaction that is hindered by a combination of surface saturation and a secondary-phase precipitation reaction at higher concentrations of citrate and reaction times greater than or equal to 72 min based on the hydraulic residence time of CSTR experiments. These findings improve our understanding of the stability of uranyl phosphate for use in sequestration of uranium groundwater plumes at contaminated sites.

58 GEOSCIENCES↗
DOE OSTI2016

Amorphous TiO 2 Compact Layers via ALD for Planar Halide Perovskite Photovoltaics

A low temperature (< 120 °C) route to pinhole-free amorphous TiO 2 compact layers may pave the way to more efficient, flexible, and stable inverted perovskite halide device designs. Toward this end, we utilize low-temperature thermal atomic layer deposition (ALD) to synthesize ultra-thin (12 nm) compact TiO 2 underlayers for planar halide perovskite PV. While device performance with as-deposited TiO 2 films is poor, we identify room temperature UV-O 3 treatment as a route to device efficiency comparable to crystalline TiO 2 thin films synthesized by higher temperature methods. Here, we further explore the chemical, physical, and interfacial properties 2 that might explain the improved performance through x-ray diffraction, spectroscopic ellipsometry, Raman spectroscopy, and x-ray photoelectron spectroscopy. These findings challenge our intuition about effective electron selective layers as well as point the way to a greater selection of flexible substrates and more stable inverted device designs.

14 SOLAR ENERGY↗
DOE OSTI2024

Millimeter-Scale Exfoliation of hBN with Tunable Flake Thickness for Scalable Encapsulation

As a two-dimensional (2D) dielectric material, hexagonal boron nitride (hBN) is in high demand for applications in photonics, nonlinear optics, and nanoelectronics. Unfortunately, the high-throughput preparation of macroscopic-scale, high-quality hBN flakes with controlled thickness is an ongoing challenge, limiting device fabrication and technological integration. In this report we present a metal thin-film exfoliation method to prepare hBN flakes with millimeter-scale dimension, near-unity yields, and tunable flake thickness distribution from 1-7 layers, a substantial improvement over scotch tape exfoliation. The single crystallinity and high quality of the exfoliated hBN are demonstrated with optical microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation. We further explore a possible mechanism for the effectiveness and selectivity based on thin-film residual stress measurements, density functional theory calculations, and transmission electron microscopy imaging of the deposited metal films. We find that the magnitude of the residual tensile stress induced by thin film deposition plays a key role in determining exfoliated flake thickness in a manner which closely resembles 3D semiconductor spalling. Lastly, we demonstrate that our exfoliated, large-area hBN flakes can be readily incorporated as encapsulating layers for other 2D monolayers. Altogether, this method brings us one step closer to the high throughput, mass production of hBN-based 2D photonic, optoelectronic, and quantum devices.

2D materials↗
DOE OSTI2015

Wafer-scale synthesis of multi-layer graphene by high-temperature carbon ion implantation

We report on the synthesis of wafer-scale (4 in. in diameter) high-quality multi-layer graphene using high-temperature carbon ion implantation on thin Ni films on a substrate of SiO{sub 2}/Si. Carbon ions were bombarded at 20 keV and a dose of 1 × 10{sup 15 }cm{sup −2} onto the surface of the Ni/SiO{sub 2}/Si substrate at a temperature of 500 °C. This was followed by high-temperature activation annealing (600–900 °C) to form a sp{sup 2}-bonded honeycomb structure. The effects of post-implantation activation annealing conditions were systematically investigated by micro-Raman spectroscopy and transmission electron microscopy. Carbon ion implantation at elevated temperatures allowed a lower activation annealing temperature for fabricating large-area graphene. Our results indicate that carbon-ion implantation provides a facile and direct route for integrating graphene with Si microelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Enhanced field emission of plasma treated multilayer graphene

Electron emission properties of multilayer graphene (MLG) prepared by a facile exfoliation technique have been studied. Effect of CO{sub 2} Ar, N{sub 2}, plasma treatment was studied using Raman spectroscopy and investigated for field emission based application. The CO{sub 2} plasma treated multilayer graphene shows an enhanced field emission behavior with a low turn on field of 0.18 V/μm and high emission current density of 1.89 mA/cm{sup 2} at an applied field of 0.35 V/μm. Further the plasma treated MLG exhibits excellent current stability at a lower and higher emission current value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Superconductivity and electron-phonon interaction in Sr x Bi 2 Se 3 under pressure

Pressure-induced superconductivity has been widely explored and observed in Bi 2 Se 3 -based topological materials to hunt for topological superconductors. Although their triggered superconductivity has a close connection to their pressure-induced structural phase transitions, the quest for the electron pairing mechanism of these superconducting semiconductors in both their initial rhombohedral and high-pressure phases remains unknown. In this work, we present a systematic study of the pressure effect on superconducting properties and lattice dynamics using a combination of electrical transport, Raman-scattering, and synchrotron x-ray diffraction measurements using diamond anvil cells. One key finding is our observation of a cooperative connection between the strength of the electron–phonon interaction (EPI) generated by optical branches and the pressure-tunable superconductivity in rhombohedral Sr x Bi 2 Se 3 crystal. The underlying suppression mechanism of the T c by pressure is ascribed to the weakening of the electrons' interaction with the optical phonon modes in the rhombohedral phase. In the intermediate monoclinic phase, the T c value underwent a sharp increase with carrier density accumulation accompanying the concurrent enhanced EPI. This is intuitively unusual since it is expected that the EPI shall be weakened by inducing more conducting carriers in a normal metal. In the tetragonal phase, the superconductivity is interpreted within BCS theory, since it is fully metallized and obeys the adiabatic Born–Oppenheimer approximation well. Our findings are important to fully understand unconventional superconductivity and the unusual pairing mechanism in the layered rhombohedral Bi 2 Se 3 -based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Morphological Characterization of UO 2 F 2 and UF 4 Hydrolysis Products

Bulk samples of UO 2 F 2 and UF 4 were aged for 3 weeks under various relative humidity (RH) conditions to examine morphological changes associated with the hydrolysis of the materials. Aged samples were analyzed using scanning electron microscopy (SEM) to examine morphological changes, and Raman spectroscopy was used to correlate these changes with chemical composition. Little to no effect was evident for either material under lower RH conditions (i.e., 16% and 33%–38% RH). Under higher RH conditions (83% and 99%), multiple morphological changes were evident within the UO 2 F 2 samples because of the formation of hydrolysis products and possible interactions at the solid–vapor interface. Only one major morphological change was observed over the aging period—within the UF 4 system at 99% RH. This change can be attributed to the initial formation of anhydrous UO 2 F 2 and, subsequently, its hydrolysis products. After 37 weeks, UO 2 F 2 persisted as a hydrolysis product of UF4; however, no further hydrolysis products were observed. These results suggest that further research into a possible divergence of UF 4 and UO 2 F 2 degradation pathways is warranted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗